Used Hang Paper Drilling Machine for sale (66,832)

Condition: used, Year of construction: 1996, functionality: fully functional, Alzmetall AX3 SV Pillar Drill Manufacturer: Alzmetall Type: AX3SV Year of manufacture: 1996 Tsdpfxezy N Egj Aahec Condition: good, used Speed range: 160 – 2250 rpm Drilling capacity (St60) 40 mm Chuck/tool holder MK 3 Spindle stroke 120 mm Overhang 293 mm Column diameter 115 mm Distance spindle-table min./max. 117 / 701 mm Feed rate 0.1 + 0.2 mm/rev Net weight approx. 270 kg Special equipment: - Automatic feed - Spindle guard

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 1-13 mm arm length: 100 mm Todpfxez Hfl To Aahec workpiece height max.: 400 mm total power requirement: 3 kW dimensions of the machine ca.: 2.0 x 1,2 x 2,2 m bore spindle turning speed range: 0-3000 U/min boring spindle drive: 2,2 kW max. Y-axis travel: 550 mm max. Z-axis travel: 300 mm The machine has a 2.2 kW spindle motor with a 2-stage gearbox for drilling and tapping. Table size is 100 x 50 cm Stroke length approx. 200 mm *

Condition: excellent (used), Year of construction: 2021, operating hours: 700 h, functionality: fully functional, Flexor 380B Mono Film and paper cutting machine Material web width: 380 mm Unwinding diameter: 800 mm Rewinding diameter: 1 x 500 mm Standard rewinding mandrel diameter: 76 mm Tsdpjz Ag Nbefx Aahsc Machine will be inspected at the factory.

Condition: good (used), Year of construction: 1955, Radial drilling machine, drilling machine, boom drilling machine -Projection: 2055 mm -Max. distance from machine table to spindle mount: 1700 mm -Conical mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -Automatic feed: 0.037-2.0 mm/rev -Clamping surface: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm Tjdpfed Enr Ijx Aahoc -Weight: 6465 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, height adjustment type: electric, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 700 rpm, total width: 1,480 mm, total length: 4,440 mm, total height: 2,700 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, Vertical glass drilling machine with two opposing spindles – the hole is drilled from both sides at once, with no blow-out on the exit side and no need to turn the sheet. Brand new, made in Poland, CE. Batch drilling up to 20 holes – the cycle is programmed once, then the machine runs it on its own Automatic glass thickness measurement (±0.4 mm) – the PLC calculates spindle depth by itself Bar positioning accuracy ±0.7 mm – minimises cracking and chipping Hole chamfering – electronically controlled 7" HMI panel – operator training approx. 3 hours Tjdjzyb Sropfx Aahec Modular design – servicing without dismantling the machine 10 years of remote online support from purchase, 12-month warranty Specifications: Dimensions 4,440 × 1,487 × 2,793 mm · weight 1,900 kg · spindle speed 700–2,800 rpm · max. drilling height 1,050 mm · max. sheet weight 200 kg · pneumatic clamping · drill cabinet for 70 bits · thin-wall bits 1/2", L=75 mm · float glass EXPOGLASS® – Polish manufacturer of glass processing machinery, 12+ years on the market.

Condition: used, Year of construction: 1976, functionality: fully functional, travel distance Y-axis: 3,500 mm, spindle diameter: 125 mm, travel distance W-axis: 800 mm, table load: 20,000 kg, table length: 2,000 mm, table width: 1,800 mm, type of input current: AC, WMW Union BFP 125 - Plate Type Horizontal Boring and Milling Machine, year of construction 1976 German-made heavy-duty plate type horizontal boring mill (Plattenbohrwerk). The complete electrical system has been fully renewed. The machine is well maintained and in full working condition. Technical data: - Spindle diameter: 125 mm - Rotary table: 2000 x 1800 mm, load capacity 20,000 kg - Spindle (quill) travel W: 800 mm - Vertical travel Y: 3500 mm - Floor plate dimensions: 9800 x 3750 mm The machine can be inspected under power at our facility in Dilovasi OSB, Kocaeli / Turkey. Price EXW Dilovasi. Loading assistance available. Tedpfx Aajzz Shmehsc

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, STC-Ref:G-071-2431 Polar 78-ED ,Year: 2002 format: 0x780 mm equipped: - safety light beam - rear table guard - datastore for programmes - monitor Todsz Hmlzepfx Aahec --> available: 11/2026

Condition: used, Year of construction: 2016, Vertical CNC drilling and machining center Manufacturer: Weeke Type: Optimat BHX Year of manufacture: 2016 Technical data - Working area X: max. 3,050 mm - Working area Y: 70,850 mm - Workpiece thickness Z: 12,60 mm - Workpiece weight: max. approx. 35 kg - Number of axes: 3 - Milling spindle: 5 kW - Milling spindle speed: max. 18,000 rpm - Tool holder: HSK-F63 or ETP 25, depending on the version Tjdpfezy N E Hjx Aahec - Tool change: automatic tool magazine - Tool positions: 4 - Vertical drilling spindles: 13 - Horizontal drilling spindles X: 4 - Horizontal drilling spindles Y: 2 - Drilling unit: V13 High Speed - Drilling unit power: 2.3 kW - Drilling speed: 1,500 - 7,500 rpm - Max. drilling depth: approx. 38 mm - Drilling diameter: max. approx. 35 mm - Spindle spacing: 32 mm - Dado saw: in X-direction - Dado saw blade: approx. 100 mm - Workpiece transport: throughfeed system / transport chain - Workpiece clamping: collet gripper, vacuum-free clamping system - Control system: HOMAG powerControl / powerTouch - Software: HOMAG woodWOP - Total connected load: approx. 11.5 kW - Dust extraction connection: approx. 160 mm - Dust extraction air requirement: approx. 2170 m³/h - Weight: approx. 1500 kg - CE Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Point to point Through-feed CNC boring machine HIRZT MERIS K2, Year 2010 - Working width up to 870mm - Working length, no limit Tsdpfx Aaez Ag E Nohoc - Working thickness up to 40mm - Configuration: 14 + 4 + 2 pcs. drilling units + routing unit 5 sides drilling - Automatic panel positioning - Automatic unloading system to return the panel to the operator or move forwards as a through-feed machine. Machine ready for loading M: 0030 6934 522 577 Sotiropoulos Nick

Condition: good (used), Perfecta 76 UC Paper Cutting Guillotine This machine is in very good condition. It has been in one hand since new. Technical specifications: Cutting width: 760mm Stack height: 110mm Weight: 1650kg Power supply: 400V Equipment: – LCD programmer – photocells – air table Todozv Nk Uopfx Aahjc – cutting line – hydraulic clamp with variable force adjustment – manual – tool kit – clamp plate – spare blade

Condition: used, Year of construction: 1984, Used Machine Year of manufacture: 1984 Universal dowel drilling machine with a swiveling drilling unit Todszk Nuvopfx Aahec with fully automatic control with 2 pneumatic safety clamps Drilling gear: 2.2 kW motor with 21 spindles Spindle pitch: 32 mm with integrated oil damping Height adjustment: 80 mm Drilling depth: 80 mm Dimensions: 140x88x160 Weight: 420 kg Machine needs to be inspected/overhauled. Basic functions are operational Availability: immediately Location: 63934 Röllbach

Condition: good (used), 1 x Bench drill with threading attachment. Solid TB 13 in good technical condition. Technical data: Chuck: BT 16 Speeds: 200 - 3200 rpm Table clamping surface: 260 x 330 mm Todpfxewyw Aps Aahsc Accessories: 1 x Röhm drill chuck 1 - 13 mm with key 1 x Threading chuck The machine can be inspected while powered on.

Condition: reconditioned (used), functionality: fully functional, pillar drill for metal Todpfx Ajz Dp Aqsahoc

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 35 mm throat 330 mm Tedpfx Aasz Euv Eohoc bore stroke 180 mm table surface area 765 x 620 mm

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad Tsdpfxsvn U Ads Aahsc angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: new, Year of construction: 2024, ALZMETALL pillar drilling machine AX 3/S, drilling capacity in steel 40 mm, spindle speeds: 160-2250 rpm, short spindle MK3, spindle stroke: 120 mm, overhang: 293 mm, column diameter: 115 mm, machine table usable support surface: 514 x 360 mm, with T-slots 2 x 14 mm x 224 mm, distance spindle-table min./max. 117/701 mm, machine table height adjustment via hand crank, machine height without options: 1840 mm, net weight: 260 kg. Standard equipment: Main switch with locking mechanism Motor with thermal protection contact Mushroom push button (latching) for EMERGENCY STOP Speed adjustment, stepless Spindle guard with electrical protection Main switch Right and left rotation Protection class IP 54 Motor insulation class "F" (155°) Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black including the following options: LED machine light, item no. 12. Digital drilling depth display Tsdpfoz E Sqyex Aahec Zero point setting (drilling start) 5-digit LED display, character height 13 mm, item no. 37.1 Delivery time: ex stock Waiblingen Beinstein The machine can be inspected at our premises by appointment.

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Tjdpfxoxnlflo Aahjc

Condition: used, Year of construction: 2005, bore capacity in steel (diameter) 30 mm throat 275 mm bore stroke 100 mm taper MK 4 MK table-size 420 x 340 mm Tedpfx Aaey N D Iqshoc feeds nein mm/U turning speeds 80 - 2000 U/min total power requirement 0,9 / 1,45 KW weight of the machine ca. 0,22 t dimensions 0,85 x 0.6 x 1,9 m Pillar drill with: - Variable spindle speed - Digital speed display - Digital depth display - Forward/reverse rotation

Condition: used, Technical details: bore capacity in steel (diameter): 25 mm throat: 310 - 315 mm bore stroke: 200 mm spindle taper MT: MK4 spindle speed:: 63 - 1000 U/min Distance spindle/table max.: 670 mm table clamping surface:: 640 x 540 mm table rotating: 360 ° current- max.: 7 A total power requirement: 3 kW Todpfx Aaozfiy Uohsc weight of the machine ca.: 700 kg dimension machine xH: 0,9 × 0,6 × 2,46 m

Condition: used, Year of construction: 1982, Technical details: dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min height over floor: 900 mm Tedpfx Asu Ngxdjahjc current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories *

Condition: excellent (used), For sale: Professional, heavy-duty bookbinding guillotine from Franz Pytlik Maschinen, Nürnberg. Robust cast iron construction designed for precise cutting of large formats in binderies and printing houses. The machine offers an impressive cutting width of 112 cm, enabling the processing of oversized sheets. The worktable depth is 72 cm. The knife mechanism operates smoothly and effortlessly, while the rear guide, adjustable via handwheel, allows for accurate format positioning. Specifications and features: – Manufacturer: Franz Pytlik, Nürnberg (Germany) – Type: manual bookbinding guillotine – Cutting width: 1120 mm – Table depth: 720 mm – Heavy-duty cast iron frame – Cutting lever with wooden handle Todpfoy Nmycox Aahsc – Rear guide adjustable by handwheel – Large, stable work surface – Lower shelf for sheets and tools – Knife in good condition (can be resharpened) Technical condition: The machine is complete and fully functional. All mechanisms operate correctly. Normal signs of use – no play and no structural damage. Ideal for use in a bindery, printing house, technical workshop or model making studio.

Condition: used, bore capacity in steel (diameter) 15 mm throat 215 mm turning speeds 200 - 3600 U/min Todpfx Aszpzb Seahec 350 x 300 mm total power requirement 1,0 kW / Volt tool taper MK 2 weight of the machine ca. 320 Kg dimensions 0,8 x 0,6 x 1,9 mm Bench drill - Base unit with drawers

Condition: new, Year of construction: 2026, functionality: fully functional, Max. drilling capacity in steel D40 mm Distance between spindle nose and table surface 260 - 1050 mm Distance between spindle center and column surface 360 - 1300 mm Spindle travel 200 mm Spindle taper MT4 Spindle speed 34 - 1220 RPM Speed steps 12 Spindle feeds 0.1 - 0.25 mm/rev Number of feed steps 3 Radial arm rotation angle 360 degrees Motor power 3 kW Todpfxjz Dq Ibs Aahjc Lifting motor power 1,5 kW Weight 1300 kgs Dimensions LxWxH = 1800 x 850 x 2300 mmű Accessories: - Coolant system - Clamping cube - Manual The machine is brand new and never used at all.

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 2,800 mm, stack height: 1,500 mm, Think Green, Box On Demand, be mindful of your CO2 footprint. The machine for processing continuous cardboard sheets listed here belongs to the series of statically operating machines, meaning that the processing steps across the machine are carried out on the stationary cardboard. The machine is designed for high productivity. The maximum working width of the cardboard is 2,800 mm. All tool settings are performed automatically. 1) Main machine body (cardboard cutting machine): Tsdpfxoz Ey Aws Aahjc Linear cross-cutting unit for head-foot cuts and cross cuts on the cardboard. Linear cross-scoring unit for cross-scoring on the cardboard. (Delivered as a cross-scorer, cross-scorer with perforating function) 12 longitudinal scoring units from above for longitudinal scoring on the cardboard. 12 longitudinal cutting units for performing longitudinal cuts. 2) Cardboard feeder, 4-cassette system A motorized cardboard feeder with a lifting axis, implemented with 4 individual cassettes, feeds the cardboard into the cardboard infeed of the main machine body. Each cassette is capable of holding rolls of raw material with a width of up to 2,800 mm and, upon request from the machine control system, automatically feeds it to the main machine body. 3) Cardboard magazine, 5-fold 5 cardboard magazines provide and feed the raw cardboard to the processing machine. A stack height of up to 1,500 mm for continuous cardboard sheets is possible. 4) Control cabinet, control system, electronics: Contains all components required to operate and control the system. Control cabinet components are based on Siemens.

Condition: excellent (used), Year of construction: 2006, operating hours: 11,533 h, travel distance X-axis: 8,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,500 rpm, feed length W-axis: 800 mm, spindle diameter: 160 mm, table load: 80,000 kg, table length: 8,000 mm, table width: 4,000 mm, overall weight: 65,000 kg, grinding spindle motor power: 41 W, Equipment: rotational speed infinitely variable, JUARISTI MX-7 RAM CNC – CNC BORING AND MILLING MACHINE, FLOOR-MOUNTED DESIGN Manufacturer: Juaristi Model: MX-7 RAM Year of Manufacture: 2006 CNC Control: Heidenhain iTNC 530 Todpfsz Aplrex Aahsc Travel Ranges - X-axis: 8,000 mm - Y-axis: 4,000 mm - Z-axis (RAM / Slide): 1,000 mm - W-axis (Spindle Stroke): 800 mm Mounting Plates / Base Plates - Mounting Surface: 8,000 × 4,000 mm - Maximum Table Load: 80,000 kg Main Spindle - Spindle Diameter: 160 mm - Tool Holder: SK 50 (ISO 50) - Main Motor Power: 41 kW - Maximum Torque: 2,024 Nm - Spindle Speed Range: - 5–1,182 rpm (low speed range) - 1,182–2,500 rpm (high speed range) CNC & Drives - CNC Control Heidenhain iTNC 530 - Siemens Feed Motors - Absolute Heidenhain Measuring System Tool and Head Equipment - Automatic Tool Changer (ATC) with 30 positions - Automatic clamping system for RAM accessories - Manual swivel head Cooling System - Internal cooling through the spindle - External cooling system Mechanical Equipment - Hydraulic-electronic RAM compensation system - Independently vertically adjustable operator platform - Chip conveyor - Complete enclosure / complete protective guard Documentation - Complete original machine documentation available