Used Helmet Guard for sale (3,249)

Condition: excellent (used), CATALOGUE NUMBER 7606 Kjdpfjy R Azrox Afpelt Technical data: - Shaft width: 500mm - Number of knives: 3 pcs - Shaft guard - Table length: 2530mm - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable at an angle - Motor: 3kW - Dimensions (L/W/H): 2530x1000x1100mm - Weight: 920kg ADVANTAGES – Made in Italy – 3-knife shaft – Used jointer – Very good condition Net price: 8,900 PLN Net price: 2,100 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, equipped with a 3-axis digital display from Heidenhain ND 780, from a training workshop!! Kledpfxey T Hqce Afpet Technical data: >> Machine No. 7702, year of manufacture approx. 1990 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet fitting >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Quick-change tool holder, internal and external collets (see picture) >> 1 three-jaw chuck, 3 sets of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: used, Year of construction: 2020, turning diameter max. 3.800 mm diameter of spindle flange 1.900 mm max. swing diameter 3.800 mm control 840 D sl Siemens turning speed range - main spindle max. 100 min/-1 power capacity - main spindel 200 kW max. Torque 67.000 Nm gear box 1:30 tool taper Capto C8 swivellable B: 0 - 270 ° Spindle speed - driven tool pos. max. 6.000 min -1 max. Torque 120 Nm tool taper Capto C8 number of toolpositions 41 pos. max. tool weight 20 kg max. tool length 400 mm max. tool diameter 120 mm 0 125 mm tool taper Capto C8 number of toolpositions 25 pos. workpiece diameter at full load 150 mm max. tool weight 20 kg max. tool length 400 mm x-axis 1: 2.800 mm x-axis 2: 3.200 mm z-axis 1.000 mm rapid traverse X: 32 / Z: 20 m/min feed power X/Z: 22 kN total power requirement 280 kVA weight of the machine ca. 155 t dimensions of the machine ca. 10,4 x 6,3 x 5,7 m CNC Vertical Turning Machine PITTLER - PV 4000 - Control Expansion / Software SINUMERIK 828D/840D SL ProgramSYNC Software Option Kedpfx Afsyrhl Dopjlt - 12-Jaw Compensating Chuck by RÖHM - Retractable Step Guards - Coolant Circulation - Coolant Conditioning - Oil Hose Skimmer - SIEMENS Safety Integrated - Network Interface / Data Transfer DNC Option - Remote Diagnostics for NC Functionality - Teleservice for Integrated PLC of the Sinumerik 840D - Ethernet Connection in the Control Cabinet - Variable Speed ??Range to Reduce Vibration - Air Purifier, Electrostatic Discharge - Probe for In-Process Workpiece Measurement - Walk-in Work Area

Condition: excellent (used), Catalogue number: 7759 TECHNICAL DATA Circular saw: - Max blade diameter: 350mm - Spindle: 30mm - Blade adjustable front/back, up/down, angle - Pneumatic movement of the saw unit front/back - Blade guard - Motor: 2.2kW I and II milling spindles: - Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 150mm - Spindle lock - Pneumatic movement of units front/back - Manual up/down adjustment - Max cutter diameter: 300mm - Motor approx. 7.5kW Kodpey Ry H Sofx Afpelt - Side sliding table – manual traverse - Table dimensions (L/W): 1000x380mm - Angle fence - Pneumatic workpiece clamp - Dimensions (L/W/H): 2600/3200 (for shipping 2200)/1540mm - Weight: 1450kg ADVANTAGES – German manufacture – 3-spindle machine – Not repainted – Very good condition – Used tenoner Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: new, Catalogue number: S 0335 - New machine, in stock - CE certificate SURFACE PLANER: - Working table dimensions: 1500 х 320 mm - Max. planing depth: 5 mm - Aluminium guide fence dimensions: 1100 x 155 mm THICKNESS PLANER: Klodpfx Afsy Ryxhspot - Working table dimensions: 316 x 600 mm - Max. planing depth: 3 mm - Feed speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Cutterhead speed: 5600 min⁻¹ - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with ground surface * Tables with precise adjustment for longitudinal planing * Stable aluminium fence adjustable from 90° to 45° * Cutterhead guard * Thickness planer table with central guide column and support * Power on/off without stopping the machine * Mortiser with left-hand rotation Net price: 14,500 PLN Net price: 3,440 EUR Price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7479 Technical data: - shaft width: 410 mm - 4-knife shaft (TERSA) - noise reduction comb - shaft guard - table length: 2610 mm - longer infeed table: 1435 mm - cast iron tables - both tables adjustable - original cast iron tiltable fence - brake - extraction port diameter: 115 mm - motor: 4 kW - dimensions (LxWxH): 2610x960x1110 mm - weight: 578 kg ADVANTAGES – Made in Italy – 4-knife shaft – brake – noise reduction comb – longer infeed table – unpainted – used surface planer, in very good condition, original DTR documentation Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may change depending on significant exchange rate fluctuations) Kedpfx Afjy Rtcaspolt

Condition: excellent (used), CATALOG NUMBER: 6911 TECHNICAL DATA - Track width: 350 mm - Shaft width: 370 mm - Max cutting height: 200 mm Maximum saw blade diameter: - Upper shaft: 340 mm - Lower shaft: 300 mm - Blade bore diameter: 80 mm From above: - Kickback guards - 2 pressure slip shafts - Pressure unit - Saw shaft 37 kW - 2 smooth slip shafts From below: Ksdpfxjy Rtaxs Afpslt - Infeed table + guide rail - Kickback guards - Crawler track - Saw shaft 37 kW - Crawler track - 1 outfeed shaft, slip, smooth - Pneumatically pressed rollers - Maximum saw blade diameter: 300 mm - Electric lifting of upper body up/down 1.1 kW - Automatic central lubrication - Electrically controlled stepless feed speed adjustment 3 kW - Extraction nozzle diameter: 230 mm, 250 mm - Dimensions (LxWxH): 3000x2300x1900 mm - Weight: approx. 4500 kg ADVANTAGES – Italian production – Twin-shaft – Used multi-blade saw – very good condition Net price: PLN 168,900 Net price: EUR 40,200 Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7394 TECHNICAL DATA Kljdpsy Rr R Njfx Afpet - max main blade diameter: 380mm - max cutting height: 110mm - main blade height adjustable up/down - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on sliding table: 2560mm - cutting width at rip fence: 810mm - with side table - main motor: 5.5kW - table dimensions: 1250x730mm - blade guard included - overall dimensions (L/W/H): 2580x2570x1050mm - weight: 780kg ADVANTAGES – German-made – Used saw, very good condition Net price: 7900 PLN Net price: 1880 EUR (based on 4.2 EUR rate) (Prices may change with significant currency fluctuations)

Condition: excellent (used), Catalogue number: 7866 TECHNICAL DATA - Max. blade diameter: 300mm - Blade bore diameter: 30mm - Blade guard - Cutting height with installed blade: 250mm, 60mm - Max. cutting width: 600mm - Ability to cut at an angle in the vertical plane – arm or blade movement - Arm rotation left/right - Motor: 3kW - Table size: 1130x1010mm - Extraction port diameter: 50mm - Dimensions (LxWxH): 1150x1190x1510mm - Weight: 220kg ADVANTAGES – Italian-made – Not repainted – DTR technical documentation – Very good condition – Used saw Net price: 6,500 PLN Net price: 1,550 EUR (based on an exchange rate of 4.2 PLN/EUR) Kodpfx Aoy Rrgwefpslt (Prices may change subject to exchange rate fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3,978 h, load capacity: 4,500 kg, lifting height: 3,150 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,400 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Standard Condition: Like new Technical condition: good Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 80 - 100% Ksdoy Tzrzepfx Afpjlt 3rd valve, 4th valve, rear work light, front work light, heater, load guard, soot filter, full cabin, full free lift, exterior mirrors, joystick, rotating beacon, LED.

Condition: used, Year of construction: 2004, machine/vehicle number: SO136, Used combiblock KRONES contiform S8 + mrecafillTechnical Specifications & Performance DataThis Krones Contiform S8 combi blow molding unit is integrated with a Krones Mecafill filler and Krones capper, delivering reliable performance for modern beverage production. Built for PET bottle handling, it supports common still and sparkling water formats on a compact rotary platform. As part of a used bottling line or as a stand-alone combi station, it offers robust engineering and consistent output for industrial packaging operations.Manufacturer: KronesModel: Contiform S8 (combi with Mecafill filler and Krones capper)Year of manufacture: 2004Production speed: up to 12,800 bottles per hourContainer material: PETNeck type: AlaskaBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsMaximum container height: 350 mmNo. of cavities (molds): 8Operating pressure: 40 barWork direction: ClockwiseLayout dimensions (approx.): Length 13022 mm, Width 10649 mmAdditional mechanics: 8 infeed/outfeed grippers; 220 mandrels on the preform handling pathAdvanced Automation & Control SystemsEngineered for dependable operation, this blow molding machine features an operator-friendly interface and modern control architecture to streamline setup, monitoring, and changeovers. Digital recipes help maintain repeatability across formats in second hand environments.HMI: KronesPLC: SiemensElectrical supply: 400 V, 3-phase, 50 HzAutomation: Rotary combi integration with synchronized blow, fill, and cap functions for stable throughputOperator protections: Safety guarding and interlocked access for maintenance zonesProduction Line Integration CapabilitiesThe Contiform S8 combi configuration enables seamless upstream preform handling and downstream filling and capping, minimizing footprint and transfer points. It integrates easily within a used bottling line, supporting conveyors, inspection, and downstream packaging machinery for beverage production.Operation modes: Integrated combi (blow–fill–cap) with rotary synchronizationFormat range: 0.5L to 1.5L PET bottlesApplication: Ideal for water bottling within industrial packaging and production line setupsMachine Condition & Maintenance HistoryThis machine has been overhauled and is guaranteed, prepared for immediate operation with compatible spare parts available. It combines the assurance of refurbished equipment with the value expected from second hand bottling equipment.Condition: Overhauled, guaranteed, ready for operationWarranty: 6 monthsOperational Performance & VersatilityDesigned for PET containers, this rotar... Kjdpfx Asy Szb Tefpelt

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer prepares ca... Kljdpfxsy Szbys Afpjt

Condition: good (used), amount 1 STK Heckert Lynette / Safety guard suitable for Heckert machines Kledpfxsy Ty Alo Afpjt

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Klodpfx Aoy Nfhxjfpst Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, Center height: 400 mm Swing over bed: 815 mm Swing over cross slide: 480 mm Swing in gap: 1000 mm Length of gap: 300 mm Distance between centers: 3000 mm Speed range: 5.6 – 1120 rpm Number of speed steps: 24 Tool cross-section: 40 x 40 mm Spindle bore: Ø 72 mm Bed width: 490 mm Tailstock sleeve taper: Morse 5 Tailstock sleeve travel: 250 mm Metric threads: 0.5 – 48 mm (35 steps) Inch threads: 48 – 7/16 TPI (42 steps) Module threads: 0.25 – 24 Module (30 steps) Diametral Pitch threads: 96 – 7/8 D.P. (42 steps) Circular Pitch threads: 1/16" – 3" C.P. (29 steps) Dimensions (LxWxH): 4860 x 1360 x 1555 mm Weight: 4600 kg Accessories and Equipment: - 2-axis digital readout (DRO) - 3-jaw chuck Kljdpfoy N Rg Hjx Afpet - Steady rest - Machine lamp - Coolant system - Rapid traverses - Chuck guard - Manual on hungarian - Original mfg cca. 1980 Condition:The lathe is completely overhauled. Available immediately.

Condition: good (used), Year of construction: 2019, Pallet Racking, Nedcon, Height 2.50 – 2.70m, Beam Lengths 3m and 4m, 500kg per pallet, max. 5,600 pallet positions, - used - : Price ex location: only €65,000 (net), dismantled, packed, and loaded, for full purchase including numerous short beams and both short and long end-of-aisle protectors / guard rails (for double and single runs)! Price for partial quantities: Frames: €45 each Beams: 2m: €14 each 3m: €18 each 4m: €22 each Kedsw D Ewvopfx Afpjlt Manufacturer: Nedcon Type: Pallet Racking Year of manufacture: 2016 / 2019 Load capacity per pallet: 500kg Number of frames: approx. 900 units Most frames are equipped with upright protectors Frame height: 2.50m and 2.70m Frame depth: approx. 1.10m Beam lengths: 4m min. 624 units (beam height e.g. 12.5cm / support approx. 5cm) 3m min. 518 units (beam height e.g. 8.5cm / support approx. 4cm) Some 1m and 2m also available Condition: good Available: immediately Location: Rhine / Main region, later warehouse in Frankenberg / Saxony

Condition: used, Year of construction: 2022, operating hours: 7,148 h, functionality: fully functional, machine/vehicle number: 252315, clamping force: 17,000 kN, screw diameter: 120 mm, displacement volume: 7,729 cm³, mold height (min.): 800 mm, ejector force: 2,30,000 N, ejector stroke: 300 mm, opening stroke: 2,550 mm, plate length: 2,420 mm, plate width: 2,170 mm, pressure: 2,300 bar, type of input current: three-phase, input frequency: 50 Hz, For sale is a modern and fully equipped production cell consisting of an ENGEL DUO 12060/1700 hydraulic injection molding machine and an ENGEL VIPER 60 RC300 Integrated linear robot. The machine was manufactured in 2024 and is designed for the production of large technical parts, automotive components, industrial containers, and parts with high quality requirements. ENGEL DUO 12060/1700 Injection Molding Machine Key parameters: - Clamping force: 17,000 kN (1700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Injection volume: up to 7729 cm³ - Injection pressure: up to 2300 bar - Injection rate: up to 1875 cm³/s - Opening stroke: 2550 mm - Maximum mold platen distance: 3350 mm - Platen dimensions: 2420 × 2170 mm - Drive power: 176 kW - Control system: ENGEL CC300 - Control language: Polish / English Machine equipment: - ENGEL ecodrive servo hydraulics energy-saving system - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interfaces - Extended mold cooling - Special design for the automotive industry - PL documentation - Special industrial ENGEL coating Klsdpjy Tuhiefx Afpet Includes ENGEL VIPER 60 RC300 Integrated robot Complete automation of production integrated with the machine. Robot parameters: Model: ENGEL VIPER 60 RC300 - Payload: up to 47 kg - Z-axis stroke: 4280 mm - X-axis stroke: 1800 mm - Y-axis stroke: 2600 mm - Servo axes B and C - Full integration with CC300 - HOP C10 operator panel - Automatic lubrication - PL/EN control - FB100 conveyor belt included - Complete safety guarding

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Internal coolant system Additional equipment • Chip conveyor Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system Kledpfjy Tw R Hsx Afpot • Workspace: • LED machine light • Signal light for operating status Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM Kodpfxoy Tmkve Afpjlt >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 410793, feed length X-axis: 400 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, quill travel distance: 60 mm, overall weight: 1,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, Universal milling and drilling machine Kunzmann WF 400 MC with Klsdpoy Tayqjfx Afpst Heidenhain TNC 620 path control Travel X/Y/Z = 400/350/400 mm Spindle speed 1-4500 rpm Power consumption approx. 15 kVA Hydraulic tool clamping, horizontal and vertical spindle Spindle SK40 DIN 69871 (form AD) with pull stud DIN 69872 Fixed angular table 650x350 mm with 5x 14 H7 T-slots Safety handwheels in all axes Collision protection coupling in the Z-axis Chip collection tray Chip guard cabinet mounted on the chip collection tray, moving vertically Coolant system 70 liters Automatic central lubrication Vertical milling head, swiveling +/-90° Halogen articulated arm lamp Control panel at the front on a long swivel arm on the base Further technical data is available upon request. The machine is located at our facility in 71334 Waiblingen-Beinstein, is immediately available, and can be inspected. Please register in advance.

Condition: used, Year of construction: 2018, Overview This compact automated can filling line was manufactured with main equipment from KHS, Ferrum, Ska Fabricating and Atlanta. The line is designed for beverage can production and includes depalletizing, can transport, ionized air rinsing, filling, seaming and downstream film / shrink packaging. The core of the line consists of a KHS Innofill Can C filling system combined with a Ferrum FC03 can seamer. The system is integrated with overhead and floor-mounted can conveyors and is arranged in a compact production layout. Technical Data Manufacturer / main equipment: KHS / Ferrum / Ska Fabricating / Atlanta Line type: Automated can filling line Number of filling valves: 21 Number of seaming heads: 3 Container type: 330ml, 440ml, 500ml standard can Packaging type: loose cans into 12 & 24 trays and WA boxes Year: 2018 Operating hours: 3,446 h Layout: compact canning line layout with overhead and floor-mounted conveyor sections Scope of Delivery Can Depalletizer | Ska Fabricating Co. | – | Enclosed depalletizing system with safety guarding | 2018 Can Conveyor System | KHS / AE | – | Overhead and floor-mounted conveyor network for empty cans and line transfer | 2018 Ionized Air Rinser | Ska Fabricating Co. | AV-C500 | Empty can rinsing / cleaning module before filling | 2018 Can Filler | KHS | Innofill Can C | Automated can filling system | 2018 Fill level detection | Heuft | - Can Seamer | Ferrum | FC03 | Rotary can seaming unit | 2018 Can dryer | Air control industries | 2018 Labeller | Pack Leader Advanced Dynamics | Pro-516 | Labelling machine incl. roller feed | 2018 Case Packer | Atlanta | Rafaello 726 | packaging system | 2018 Case Packer Printer | SATO | S86-EX | 2018 Kledpjy Tt H Defx Afpst

Condition: new, Year of construction: 2026, Continuous/standard drilling capacity (mm): 20/23 (in E335/ST60) Thread cutting capacity (pitch-dependent): M12 Spindle: MT II Spindle speed (stepless): 40–4000 rpm Drilling depth (mm): 100 Throat depth (mm): 240 Column diameter (mm): 82 Usable working area (W x L) (mm): 340 x 280 T-slot size (arm), spacing (mm), slot width (mm): Quantity 2, 125, 13/26 Speed display: Digital Drilling depth display: Digital Drilling depth stop: Quickly adjustable stop ring Feed (mm/rev): Manual Table height adjustment: Rack and pinion Three-phase motor 400V with frequency inverter (kW): 1.5 Distance spindle/working surface (mm): 160–880 Machine dimensions without packaging (mm): 355 x 705 x 1825 Machine dimensions with packaging (mm): 572 x 936 x 2142 Weight (kg): 195 Standard accessories: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover with ergonomically inclined front - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Stepless speed control via central rotary knob - Emergency stop button - Thermal overload protection - Spindle stop - Drill guard with electrical safety interlock - Connection cable with CEE plug Optional accessories: Drilling package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Keyless drill chuck 3–16 mm (accuracy 0.17 mm), - Morse taper arbor MT 2 B18 and reducing sleeve MT 2 to MT 1 €485.00 3-year warranty for single-shift operation Free delivery within Germany NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU ANY PRODUCT FROM THE COMPLETE FLOTT RANGE! PLEASE REQUEST A QUOTE! Kledpfxjir Ir To Afpot

Condition: new, Year of construction: 2026, A universal belt grinding machine for rough grinding and metal buffing. Suitable for various shapes and materials. The machine is by default equipped with a suction connector for extraction. 75×2000 mm grinding belt, powerful 3 kW motor. SM 75 model is additionally equipped with 2 belt speeds: 14,5 and 29 m/s. 2 rubberised wheels ensure good grip of the grinding belt. Kodsvu Uhaepfx Afpjlt Machine features Universal area of application for edges, surfaces and round grinding Graphite coating on the surface for grinding surfaces increases the grinding belt's slippage Spring device ensures constant belt tension Easy and quick belt replacement Optimum grinding efficiency due to the high speed of the belt Can be quickly adjusted to horizontal or inclined grinding Universal area of application in iron working shops and industrial areas Large grinding surface with a protection guard Equipped with an additional precise adjustment of the belt inclination angle By default equipped with 2 belt speeds Technical data Wheel contact surface (H×W) 250×150 mm Grinding belt dimensions (L×W) 2000×75 mm Belt speed 14,5/29m/s Motor power 3 kW Weight 72 kg Dimensions (L×W×H) 1070 x 560 x 980 mm Warranty 12 months

Condition: new, Cantilever rack, one-sided, frame height 2.60m high, 80cm deep arms, 750kg per arm, hot-dip galvanized - New - : Price ex site incl. loading! Price: 1.480.-€ (net) Price transport / packaging costs within Germany (without islands): 400.-€ (net)! Of course, you can also build longer or shorter shelving units by omitting or purchasing additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new goods Description: - Shelving upright, one-sided 2,600 mm high, hot-dip galvanized - Base and arm depth 800 mm - with 3 height-adjustable shelf arms each - Load capacity with load center 400 mm - 750 kg per arm / 2..250 kg per upright with 4 uprights per arm level 4 x 750 kg = 3,000 kg Profiles: Frame (uprights): IPE 140, arms IPE 80 incl. longitudinal and diagonal bracing, The standard center distance between the frames is 1.30 m. Other standard center distances available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m there is a small surcharge on top of the stated price! Special dimensions (other center distances) are also available on request, but also cost extra and have a longer delivery time as they have to be made separately! If you do not specify a different center distance, we will deliver the shelf with a center distance of 1.30m. In this case, the length of a row of shelves with 4 uprights (3 bays) is approx. 4m. Supplied with all screws and nuts (dispatch within Germany by parcel directly from Würth), without ground anchors. Kedpfx Aenwmwvsfpslt When using additional arms per frame, please note that the specified maximum load capacity of the frames must not be exceeded, or the maximum usable load capacity per arm will be reduced! Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us! Available optional extras (at extra cost), photos enclosed: Footrest with load deflector Footrest with load deflector, large Foot section with tire guard Cantilever arm with load deflector Cantilever arm with plug-in roll-off protection Clampable roll-off protection Gratings Conversion for use for the storage of pallets Photos are examples of single-sided shelving and the material used!

Condition: good (used), Approx. 840 swivel castors, Blickle Ø160 mm, wheel width 50 mm, LH-ALBS 160K-FS – used – : Price per unit ex-location: €52 (net)! Manufacturer: Blickle Type: LH-ALBS 160K-FS Year of manufacture: unknown Original list price approx. €210 net Technical data: - Wheel diameter (D): 160 mm - Wheel width: 50 mm - Load capacity at 4 km/h: 580 kg - Static load capacity: 1,450 kg - Bearing type: Ball bearing - Overall height (H): 202 mm - Top plate size: 140 x 110 mm - Bolt hole spacing: 105 x 75–80 mm - Bolt hole diameter: 11 mm - Offset (F): 65 mm - Temperature resistance min: -20°C - Temperature resistance max: 70°C - Tread hardness: 75 Shore A - Unit weight: 4.2 kg Heavy-duty pressed steel swivel castor with top plate, with foot guard made of steel, heavy-duty wheel with polyurethane tread Blickle Besthane® Soft, with aluminium wheel centre Kjdpfx Aow D E Tkjfpelt Housing: LH series - Heavy-gauge pressed steel, electro-galvanised, blue passivated, Cr6-free - Heavy-duty fork and base plate - Double ball race in the swivel head - Very sturdy centre bolt, bolted and secured - Particularly resistant to impacts and shocks due to four specially designed, hardened bearing shells Wheel: ALBS series Tread: High-quality polyurethane elastomer Blickle Besthane® Soft, hardness 75 Shore A, blue, non-marking, non-discolouring in contact Wheel centre: Aluminium die-cast, silver-grey colour Other features: - High chemical resistance to many aggressive substances - Temperature resistance: -20°C to +70°C, short-term up to +90°C (reduced load capacity above +40°C)