Used Hiller Dp51 Mobil for sale (6,703)

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, suction capacity: 4,900 m³/h, intake manifold diameter: 250 mm, Dust extraction unit, wood chip extractor, pneumatic self-cleaning vacuum filter – Alko Mobil JET 250 The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Ideally suited for wide belt sanders and for extracting all types of dry dust in various technological processes. Fan power: 6.5 kW Hjdpfx Aljzlcxqe Dsnr Capacity: 4900 m3/h Vacuum: 2740 Pa Nozzle diameter: 250 mm Air return Stock number: 0904

Condition: excellent (used), power: 129 kW (175.39 HP), operation weight: 18,800 kg, Year of construction: 2014, operating hours: 14,245 h, Equipment: air conditioning, cabin, CATERPILLAR M320F year: 2014 operation hours: 14.245 hrs. ROPS Airco Radio Back drive camera hydr. 2 piece boom stick: 2,50 meter all hydr. lines (hammer-, gripper-, scissor-) Pre-configured for the Trimble GCS900 Quick coupler OQ65 1 x Bucket with 800mm width central lubrication Camso tyres 10.00-20 approx 50% good blade support ( 2.5m width) CE Engine with 129kW Transport : 9x2.5x3.30m operation weight: 18.8 to. Hodpfxozud Aps Al Djnr

Condition: refurbished (used), Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, power: 260 kW (353.50 HP), year of last overhaul: 2026, Basic Inventhor 6 package: Load-Sensing System Fuel tank, 500 liters Longitudinal belt: belt length 2,900 mm, belt width 800 mm centrally arranged lubrication strips 24V electrical control system - additional electric pump for operating the following functions when the engine is stopped: raise/lower/tilt rear belt, open/close comb flap, open/close comb, raise/lower folding chute complete radio remote control large side GRP maintenance doors easy-to-maintain engine compartment LED lighting package: engine compartment and rear hydraulically reversible fan wheel three-sided loading protection folding chute fire extinguisher Hsdpfx Aexx N Dgol Djnr maintenance ladder toolbox acoustic start-up warning Doppstadt telematics system paint: RAL2011 traffic orange Additional equipment: Drive train 260 kW - EV 2-axle semi-trailer chassis Shredding system Size L - 20 teeth Additional hydraulic connection 35 - 80 l/min Hydraulic drive Rear belt 7 m Over-belt magnet, neodymium Frame for over-belt magnet, 7 m Delivery date will be agreed upon.

Condition: new, functionality: fully functional, power: 450 kW (611.83 HP), Year of construction: 2025, ### Crawler Mobile Crusher / Track-Mounted Mobile Stone Crusher: Introduction and Application Introduction: Crawler mobile crushers, also known as track-mounted mobile crushers, are versatile and highly efficient machines designed for crushing various materials on-site. Unlike traditional fixed crushers, these mobile units are mounted on tracks, allowing them to navigate rough terrains and remote locations with ease. Hjdjq Nfvuepfx Al Dsnr These crushers integrate feeding, crushing, screening, and conveying processes into one system, providing flexibility and reducing the need for multiple pieces of equipment. Powered by diesel engines, they offer mobility, reduced setup time, and a compact design that simplifies transportation. Key Features: 1. Mobility: Track-mounted design ensures ease of movement across different sites. 2. Versatility: Suitable for crushing various types of materials, including rocks, ores, and demolition waste. 3. Efficiency: High-performance crushing and screening capabilities. 4. Eco-friendly: Equipped with dust suppression and noise reduction systems. 5. Automation: Advanced control systems for smooth operation and minimal manual intervention. Applications: 1. Quarrying and Mining: Ideal for crushing hard and abrasive stones such as granite, basalt, and limestone. They efficiently process raw materials for construction aggregates and mining operations. 2. Construction and Demolition: Perfect for on-site crushing of demolition waste, including concrete, bricks, and asphalt. This reduces the volume of waste and allows for recycling of materials, contributing to sustainable construction practices. 3. Infrastructure Projects: Widely used in road construction, railway ballast production, and infrastructure development. Their mobility ensures they can operate close to the construction site, reducing material transportation costs. 4. Recycling: Effective in recycling operations, particularly for crushing and processing concrete and asphalt debris. This contributes to reducing landfill use and conserving natural resources. 5. Aggregate Production: Essential for producing high-quality aggregates used in construction projects. Their capability to produce different sizes of aggregates meets various industry standards and requirements. Conclusion: Crawler mobile crushers are indispensable in modern construction and mining operations. Their mobility, efficiency, and versatility make them a valuable asset for industries requiring on-site crushing and screening. By reducing setup time and transportation costs, they enhance operational efficiency and contribute to eco-friendly practices through material recycling.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: VWASGFF24A2114884, power: 81 kW (110.13 HP), mileage: 42,800 km, axle configuration: 2 axles, lifting height: 16,100 mm, lifting power: 210 kg/m, overall weight: 3,500 kg, empty load weight: 3,500 kg, construction height: 2,920 mm, fuel type: diesel, Working height: 18.10 m Platform height: 16.10 m Lateral outreach: 12 m Load capacity: 210 kg Self-leveling: No Vehicle length: 6.70 m Vehicle width: 2.10 m Vehicle height: 2.92 m Adjustable front outrigger width: 2.67 / 3.45 m Rear outrigger width: 2.63 m Hedpfx Ajy Edbvsl Donr Engine drive: Diesel Platform drive: Diesel / Electric 230V

Condition: good (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: VWASGFF24A2114885, power: 81 kW (110.13 HP), mileage: 21,991 km, axle configuration: 2 axles, load capacity: 210 kg, overall weight: 3,500 kg, empty load weight: 3,500 kg, fuel type: diesel, Working height: 20.80 m Platform height: 18.80 m Outreach at 200 kg: 8.00 m Outreach at 120 kg: 10.00 m Outreach at 80 kg: 11.00 m Slewing range: 360° Rotating platform: 2 x 90° Platform dimensions: 1.34 x 0.64 m Payload capacity: 210 kg Self-levelling system: No Vehicle length: 6.70 m Vehicle width: 2.10 m Vehicle height: 2.92 m Adjustable front outrigger width: 2.67 / 3.45 m Rear outrigger width: 2.63 m Hodpfxsyia S Us Al Denr Unladen weight: 3,500 kg Engine: Diesel Special features: No passenger seat

Condition: ready for operation (used), Working widths 660 mm Equipment 2nd folding unit: • 6 buckle plates • noise prevention Hsdpsd Hgvzsfx Al Donr

Condition: good (used), Year of construction: 2006, Year of construction: 2006 Inlet width: max 480 mm; min 150 mm Inlet length: max 320 mm; min 80 mm Inlet height: max 650 mm; min 450 mm Product thickness: max 60 mm Hnodpfx Aleqrq Sas Dor Speed: max 160 m/min

Condition: used, Year of construction: 2018, operating hours: 9,937 h, Equipment: all wheel drive, Internal vehicle number: G400152 Available immediately at our location in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova CAT M322F Wheeled Excavator | Topcon MC-i4 GPS | Quick Coupler | Approx. 21.8 t For sale: a used CAT M322F wheeled excavator, manufactured in 2018. The machine is equipped with a Topcon MC-i4 GPS machine control system, a quick coupler, hammer hydraulics, and all-wheel drive. Thanks to the BSS boom suspension and central lubrication system, the wheeled excavator offers enhanced comfort and is suitable for a wide range of applications in civil engineering, road construction, and earthmoving. Technical specifications: * Manufacturer/Model: CAT M322F * Machine Type: Wheeled Excavator * Year of Manufacture: 2018 * Operating Hours: Approx. 9,938 h * Engine Power: 129.4 kW * Operating Weight: Approx. 21,800 kg * All-Wheel Drive * Environmental Badge: 4 (Green) * Technical Inspection: New * Vehicle Number: G400152 * Condition: Used * German Vehicle Equipment: * Topcon MC-i4 GPS Machine Control System * Quick Coupler System * Hammer Hydraulic Connection * BSS Boom Suspension * Central Lubrication System * All-Wheel Drive Inspection and functional testing are possible by prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale reserved. Financing example: * Internal number: G400152 * Purchase price: 79,900.00 € * Down payment: 10% * Term: 60 months * Monthly rate: 1,230.02 € * Residual value: 15,380.00 € If you are interested in this offer or would like to customize it to your needs, please contact Mr. Enchev. We look forward to your call. Errors and omissions excepted. We would be happy to accept your used vehicle in trade. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. Hedpfxey R H Ebs Al Denr

Condition: used, Year of construction: 2016, operating hours: 10,733 h, Equipment: all wheel drive, Internal vehicle number: G400121 Available immediately at our yard in Kaufungen. More information: ? Luis Lucena ? Viktoria Sologubova Atlas 1404 K ZW 4x4 Road-Rail Excavator | Road/Rail | Attachments | 20 t For sale: a used Atlas 1404 K ZW road-rail excavator, manufactured in 2016. This machine is designed for operation on both roads and railway tracks and is offered with several attachments. The excavator features four-wheel drive, a central lubrication system, air conditioning, auxiliary heating and a reversing camera. A CE declaration of conformity is available. Technical specifications: * Manufacturer/Model: Atlas 1404 K ZW * Machine Type: Wheeled Road-Rail Excavator * Application: Road and Rail * Year/Model Year: 2016 * Operating Hours: 10,733 hrs * Engine: Deutz TCD 4.1 L4 * Engine Power: 95 kW * Rated Speed: 1,800 rpm * Permissible Total Weight: 20,000 kg * Permissible Front Axle Load: 10,000 kg * Permissible Rear Axle Load: 11,500 kg * Vehicle Identification Number: 241 Z 301938 Hnedoyzk Ihspfx Al Dor * Drive System: 4x4 * CE Declaration of Conformity available * Measured Sound Power Level: 96.2 dB(A) * Guaranteed Sound Power Level: 98 dB(A) * Technical Inspection: New * Vehicle Number: G400121 * Condition: Used * German Vehicle Equipment: * Road-rail equipment for road and rail operation * Four-wheel drive * Central lubrication system * Air conditioning * Auxiliary heating * Reversing camera * Load hook Attachments: * Grading bucket * Grab, 800 mm * Grab, 280 mm * Load hook Inspection and functional testing are possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Financing example: * Internal number: MK * Purchase price: €65,900.00 * Down payment: 10% * Term: 60 months * Monthly payment: €1,025.02 Residual value

Year of construction: 2004, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1250 mm VERTICAL TRAVEL: 2000 mm RAPID FEEDS L-T-V: 20 m/min Hjdpfx Aljwlwhce Denr TRANSVERSAL TRAVEL OF THE TABLE: 2000 mm PALLET: 2000 x 2500 mm; 1200 rpm MAX ADMITTED LOAD: 28000 Kg HEAD: A/B AXIS AUTOMATIC ; ISO50 DIN ; 15-4000 rpm; 30 kW; 650 Nm TOOL MAGAZINE: CHAIN-TYPE ; 41 POS CONTROL UNIT: FIDIA C20 XPOWER HIGH PRESSURE COOLANT: 12 Bar ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER

Condition: ready for operation (used), The cell consists of two Kawasaki FD 50N industrial robots as well as an infeed and outfeed conveyor, it is mounted on a compact, mobile base plate equipped with threaded holes for fastening the individual components, a roller conveyor and the safety enclosure, the entire cell is forklift-compatible, can be relocated after installation to adapt the cell to different production lines, particularly suitable for seasonal production and short production runs, area: 8.6m², overall length: 3550mm, overall width: 2440mm. Number of axes: 5, max. reach: 2100mm, max. payload: 50kg, repeatability: +/-0.15mm, robot weight: 580kg, palletizing capacity: 2400 cycles/h at 50kg payload, controller: D42, working envelope: 1100x1100x1944.7mm, axis movements: Axis 1: +/-157°, Axis 2: +140° to -95°, Axis 3: +30° to -205°, Axis 4: +/-360°, Axis 5: +/-10°, axis speed: Axis 1: 180°/s, Axis 2: 150°/s, Axis 3: 180°/s, Axis 4: 350°/s. With documentation. An on-site inspection is possible, the system is not powered. Hnjdpfxsztramj Al Dor

Condition: good (used), Year of construction: 1995, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 32 A, cutting height (max.): 900 mm, cutting width (max.): 900 mm, Equipment: documentation/manual, lighting, motor brake, This sawmill includes: 2x clamping devices 4x vertical stops 4x leveling devices with clamps 4x log lifting arms 1x pre-cutter 1x log roller with drive 1x saw blade lubrication system 1x water lubrication system 1x electric positioning control Basic cutting length: 9.0 m Log passage: approx. 90 cm Hydraulic pump: 14 liters Motor power: 11 kW Saw blade width: 100 mm The saw was used as a secondary source of income, with approximately 500 cubic meters of timber cut per year. The friction wheel drive has been replaced with a hydraulic feed system, and the hydraulic pump has also been replaced. It has a tilting cabin and a handle heater for the fingers, which is supplied with warm hydraulic oil. The cast iron rollers were replaced about two years ago, and approximately 800 cubic meters of timber have been cut with them. Two saw bed extensions are included, one 3.0 m and one 2.0 m, for a total cutting length of 14.0 m. The saw motor was re-conditioned last year. An additional 18.5 kW electric motor is included, but has not yet been installed. Approximately 15 saw blades for hardwood and softwood are included, some of which are new. Hnedpfx Aljzk Exde Der The machine runs very well, all components are fully functional, and there are no leaks in the hydraulic system. The saw can be inspected while in operation. For sale due to the purchase of a new machine.

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, empty load weight: 3,800 kg, maximum load weight: 2,780 kg, operating hours: 2,285 h, Equipment: steel tracks, For sale: a Maeda metal-tracked crane (with rubber pads) in perfect condition. It is equipped with a Komatsu diesel engine and requires minimal space. It is ideal for use in confined areas. Hnodszq Dlpopfx Al Djr

Condition: used, Mobile assembly platform, Workmaster, podium ladder, platform staircase ZARGES type Z-53796 Aluminum ladder, access ladder Year of manufacture: 2016 Platform height: approx. 45 / 73 / 1000 mm Platform size: 1700 x 600 mm - 3 steps + podium - Aluminum construction - Foldable staircase with 200 mm deep steps and non-slip surface - Platform with non-slip surface - Movable on swivel casters, 4 swivel casters with locking mechanism - Lowering device on the stringer as a central brake - Assembly platform foldable, can be disassembled for transport Space required L / W / H: 2600 x 740 x 1940 mm Transport dimensions L / W / H: 2000 x 950 x 670 mm Hodpfjznrquex Al Djnr Weight: 54 kg Very good condition, like new

Condition: used, Year of construction: 2019, This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 2nd – 4th September 2026. For more information go online. Hnjdpfjzub Sbox Al Der

Condition: like new (used), functionality: fully functional, Exhibition machine Hnjdpjzrnqljfx Al Der For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air flow rate of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and refurbished by our qualified personnel. Technical data: - Clean air extraction unit RL-125 - Extraction connection 125 mm - Manual filter cleaning - Max. air flow rate 1,900 m³/h - Chip container with a capacity of 200 liters - 3 kW (4 hp) motor / 400 volts - H3 certified! The clean air unit is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-D1618

Condition: used, Year of construction: 2017, This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 2nd – 4th September 2026. For more information go online. Hjdpfx Ajzubnijl Djnr

Condition: ready for operation (used), functionality: fully functional, fuel type: electric, Omme Ommelift 1700 EBX trailer-mounted aerial work platform – 17 m – TÜV (German Technical Inspection Association) certification – good condition For sale is an Omme Ommelift 1700 EBX trailer-mounted aerial work platform in good and fully operational condition. The aerial work platform is in very good technical condition and can be inspected and demonstrated on-site. The TÜV certification was recently renewed. The existing wheel drives are currently defective. New wheel drives are already available and will be included with the sale, but have not yet been installed. New batteries were installed in 2026. Equipment / Condition Working height approx. 17 m Trailer-mounted aerial work platform Hydraulic outriggers Large work platform Hnodpoztkyfjfx Al Der Hydraulic telescopic boom Operation from the work platform Otherwise in very good and functional technical condition TÜV valid until 08/2027 New wheel drives included Normal signs of wear and tear due to age and use The platform is ideal for assembly work, hall construction, roof and facade work, tree care work, as well as industrial and maintenance operations. An on-site inspection and functional test is expressly possible and desired. Sold by a commercial seller. Subject to prior sale and errors. Location: Merseburg Collection by the buyer. Assistance with loading can be provided upon request.

Condition: used, functionality: fully functional, Year of construction: 2026, A mobile work table is an ideal solution for precise woodworking tasks. The lifting height is adjustable up to over 1000 mm. The table surface is equipped with wooden pads that do not damage the surface of the processed material. Device description It enables independent work without additional assistance, even with full-size wooden and wood-based panels. The mobility and folding function make the table perfect for situations with limited space in a carpentry workshop or garage. Hnjdpezp Eq Dofx Al Dor The table can be used for milling, cutting, gluing, and assembly. After finishing work, it can be folded and takes up little space. The very durable steel construction ensures a long service life. The table is additionally equipped with rollers and a locking mechanism. Tilting function available. Technical parameters Maximum length: 2100 mm Maximum width: 1800 mm Minimum length (folded): 1150 mm Minimum width (folded): 300 mm Height adjustment range: 790–1050 mm Base dimensions: 1000 × 1150 mm Weight: approx. 35 kg PLEASE NOTE!!! This product is a return item, has been used, and the packaging is damaged. NO WARRANTY!!!

Condition: used, mileage: 11,920 km, power: 95 kW (129.16 HP), gearing type: other, fuel type: gasoline, color: yellow, overall weight: 23,000 kg, empty load weight: 21,816 kg, maximum load weight: 1,184 kg, number of seats: 1, first registration: 02/2013, emission class: none, suspension: other, Year of construction: 2013, operating hours: 11,920 h, total length: 7,700 mm, driver cabin: other, construction height: 4,000 mm, Equipment: air conditioning, parking heater, trailer coupling, The used Atlas 1604 K ZW KLIMA rail-road excavator is a versatile excavator, equipped with a quick coupler and a reliable Deutz engine. The excavator was built in 2013 and has 11,920 operating hours. The machine offers an engine power of 95 kW (129 hp) and a displacement of 4,038 cc. It has a spacious double cabin with a heated, air-suspended comfort seat and air conditioning. The vehicle is suitable for use on trams thanks to its narrow axles and special support. Other features include an Eberspächer fuel heater, a CWF600 soot particle filter and a rear view camera with monitor. The excavator has a heavy counterweight of 4.5 tons and a swing radius of 2,000 mm, which ensures greater stability and efficiency on the construction site. The excavator is also equipped with a wagon braking system that can be controlled from the cabin, as well as an electronic stroke limiter for fine-tuning the lifting and working cylinders. The machine has various loading options and is offered with a comprehensive maintenance record (service booklet). Inspections are possible during the stated opening hours without prior appointment. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved. Hsdpfxjr Uzazs Al Dsnr

Condition: used, Year of construction: 2010, Mobile measuring arm for measuring machine, measuring device Manufacturer: Zett Mess Type: AMPG 2400 Precision Hnedpfewu E D Rex Al Djr Year of manufacture: 2010 – unused Measuring diameter: 2,400 mm 22726

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 4x4, Year of construction: 2015, operating hours: 10,575 h, Equipment: adjustable boom, air conditioning, differential lock, gripper hydraulics, hammer hydraulics, Liebherr A918 mobile excavator, manufactured in 2015, with only 10,575 operating hours, in very good condition, immediately ready for use, with dozer blade supports, air conditioning, and central lubrication system. Transport and delivery are possible. Inspections can be arranged, also on weekends. We also prepare customs/export documents. Hodpfx Aleztq Ago Denr

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 350 mm, total width: 605 mm, total height: 1,080 mm, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 70 mm, scan area width: 70 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) Hnsdjznr Umjpfx Al Djr - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Condition: used, Year of construction: 2009, 3520 kW Operating weight max. 120.000 ca. 55.000 kg Unladen weight of the kiln car ca. 40.000 Usable dimensions 4000x1500x10500 Clear dimensions 5.000 x 2.575 x 11.275 External dimensions 7.100 x 7.245 (mit Türpor 550 – 1.100 °C Max. permissible oven chamber temperature 1.150 Safety cut-off temperature 1.180 Complete System – Industrial Heat Treatment Line with 6 Identical Bogie Hearth Furnaces and Quenching System For sale is a complete industrial heat treatment system consisting of 6 identical bogie hearth furnaces type HW150-3520-1100, including an integrated quenching system and complete central plant equipment. The offered system represents a fully coordinated industrial production solution for demanding thermal processing applications. All six bogie hearth furnaces are of identical design, ensuring consistent process conditions, high operational availability, and excellent interchangeability of components. The complete system includes not only the six high-performance bogie hearth furnaces but also the required central plant components and auxiliary systems, including burner systems, combustion air supply, exhaust gas extraction, temperature control and monitoring systems, as well as the complete furnace and bogie equipment. With a rated heating capacity of 3,520 kW per furnace, an operating temperature range of up to 1,100 °C, and a maximum load capacity of up to 120,000 kg per furnace, this system provides a powerful solution for large-scale industrial heat treatment processes. The combination of six identical furnace units together with the integrated quenching section offers: High production capacity through parallel operation of multiple furnace units Reliable and repeatable heat treatment processes Flexible handling of different charge sizes Centralized and coordinated plant utilities Robust industrial design for continuous production environments The system is offered as a complete turnkey heat treatment solution and provides an immediately deployable production platform for industrial applications requiring high capacity, process reliability, and consistent thermal treatment results. Technical Data 7.1 Furnace Housing Dimensions External dimensions1: 7,100 x 7,245 (incl. door portal) x 12,745 mm Clear dimensions: 5,000 x 2,575 x 11,275 mm Usable dimensions: 4,000 x 1,500 x 10,500 mm Workpiece supports: 6 units, height 475 x 340 mm 7.2 Weights Empty weight of housing: approx. 55,000 kg Empty weight of hearth car: approx. 40,000 kg Operating weight: max. 120,000 kg Weight of supports: 6 units at 5,083 kg each = 30,500 kg 7.3 Performance Data Nominal heating capacity: 3,520 kW Temperature control range: 550 – 1,100°C Max. permissible furnace chamber temperature: 1,150°C Safety cut-off temperature: 1,180°C Heating rate: max. 60 K/h at 120,000 kg operating weight Max. permissible heating rate: 60 K/h Number of temperature control zones: 6 All dimensions: width x height x depth or Ø x height. Utility Supply Parameters 7.4.1 Natural Gas Calorific value Hu(n): 10.6 kWh/m³(n) Gas inlet pressure: 2.0 bar Max. volume flow: 334 m³(n)/h / 118 m³(b)/h Temperature: +5 to +25°C. 7.4.2 Combustion air Composition: Ambient air Combustion air pressure: max. 100 mbar Max. volumetric flow rate: 11,500 m³(n)/h Hnedpfx Alszpbmbs Der Temperature: +5 to +40°C 7.4.3 Power supply Voltage: 400 V Mains frequency: 50 Hz Connected loa...