Used Hitachi Seiki Hs 400 for sale (21,890)

Condition: excellent (used), Catalog number 7259 TECHNICAL DATA - Inlet width 400mm - Inlet height 200mm - Shaft width 530mm - Shaft diameter 550mm - Blade length 530mm - Number of blades 2 Lsdpfx Ajzrug Tobyehl - Screen dimensions 50x50mm - 2 toothed pull shafts from below - Lower shaft motor 2.2kW - Toothed pull shaft from above - Upper shaft motor 2.2kW - Belt conveyor 0.55kW - Belt conveyor length 3000mm - Belt conveyor width 410mm - Main motor 45kW - Automatic reversing - Reverse gear - Machine dimensions (L/W/H) 2900x1600x1600mm - Feeder dimensions (L/W/H) 3070x720x670mm - Weight approximately 3500kg ADVANTAGES - German-made - Automatic reversing (with adjustable settings) - Reverse gear - Used shredder, very good condition Net price: 85900 PLN Net price: 19977 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 2008, turning diameter 600 mm turning length 1.045 mm control MSX - 711 III MAPPS III swing diameter over support 600 mm distance between spindles 1.255 mm max. bar capacity 65 mm turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 25 / 22 kW no. of turning speeds 2 spindle nose JIS A2-6 Lhodpfx Abjz At T Heyjl spindle bore 73 mm C-Axis 0,0001 ° internal diameter 120 mm chucking diameter 200 mm Speed range Tool Spindle max. 12.000 min/-1 Power rating Tool Spindle 5,5 / 3,7 kW tool taper Capto C5 internal diameter 65 mm B - Axis 0,0001 ° swivellable +/- 120 ° x-axis 685 (610 + 75) mm y-axis +/- 125 mm z-axis 1 mm number of toolpositions 12 pos. Shank height for square tool 20 mm Drill shank diameter max. 32 mm tools in tool magazin 40 pos. max. tool diameter 70 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 4 kg change-time tool to tool 1,25 sec Rapid traverse X / Z: 50 m/min Rapid traverse Y: 30 m/min Rapid traverse X2 / Z2: 30 m/min total power requirement 88 kVA weight of the machine ca. 16,5 t dimensions of the machine ca. 6,0 x 4,0 x 3,0 m High-Precision 5 Achsen CNC-Turning- and Millingcenter MORI SEIKI - NT 3200 DCG / 1000 SZ - 5 Axis - Swivable Milling-Head (B-Axis) - Subspindle - lower turret - approx. 11,300 power-on hours - approx. 9,200 spindle hours

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 6,100 kg, number of axes: 4, This 4-axis DMG Mori Seiki NL2500Y/700 was manufactured in 2006. It features a robust control unit, MORI SEIKI MSX-850, and includes an integrated mist extraction unit, chip conveyor, tailstock, turret, and tool setter. With a mass of 6100 kg, this turn-mill centre is designed for high-performance machining. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki NL2500Y/700 machine we have for sale. Contact us for further details. - Phase: 3- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 113 A- Current Rating of the Spindle Motor: 140 A- Interrupting Capacity: 5 kA- Short Circuit Rating: 1 kA- Rated Power: 39 kVA- Mass of Machine: 6100 kg- Control Unit: MORI SEIKI MSX-850- Additional Equipment / Attachments: Integrated mist extraction unit (SARA UC1 SDIV), chip conveyor / chute integration, tailstock, turret, tool setter / probe arm Technical Specification Counter Spindle No Driven Tools Yes Lhodpsz A Uz Nofx Abyol

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, Controller MITSUBISHI MELDAS M70 Lodpfx Aezxzwrsbyohl Table size 910 x 400 mm Max. table load 960 kg X travel 760 mm Y travel 445 mm Z travel 520 mm Spindle speed 12000 rpm Tool holder type MAS BT40 Spindle power 22 kW ATC Magazin 22-fold Weight 4400 kg Dimensions LxWxH = 2200 x 2200 x 2700 mm Features, accessories - 2 axis nc round table - Coolant unit - Chip conveyor - Manuals

Condition: good (used), Year of construction: 1987, Machine is in good working condition. Parts shown by hand not come. Lodez Arxzopfx Abyehl

Condition: good (used), Year of construction: 1999, Machine is used, in good condition. Lhodpfx Aboz Arlzjyel Parts shown by hand not come.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 26,711 h, This 3-axis DMG Mori Seiki NVX 5080 II/40 was manufactured in 2013. It features an X-axis travel of 800 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a weight of 6350 kg and is equipped with a rated power of 34 kVA. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki NVX 5080 II/40 vertical machining center we have for sale. Contact us for further details. Lodpfx Asz Akwpjbyjhl • Machine weight: 6350 kg • X-Axis: 800 mm • Y-Axis: 530 mm • Z-Axis: 510 mm • Main electronic connection: 200 V, 3-phase, 50 Hz • Power consumption: 34 kVA • Machine type: Vertical Machining Center • Year: 2013 • Made in: Japan • Serial number: NV502130709 • Machine connected and available for inspection/testing.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,76,232 h, This 4-axis MORI SEIKI DuraVertical 5080 was manufactured in 2008. It features an X-axis travel of 800 mm, Y-axis travel of 530 mm, and Z-axis travel of 500 mm. The machine has a robust weight of 6100 kg and includes a rotary/indexing table, which has been unused since new. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5080 vertical machining centre we have for sale. Contact us for further details. • Machine weight: 6100 kg • X-Axis: 800 mm Lhedsz Akr Topfx Abyel • Y-Axis: 530 mm • Z-Axis: 500 mm • 4-AXIS: Yes • Main electronic connection: 200 V, 3-phase, 50 Hz • Power consumption: 27 kVA • Machine type: Vertical Machining Center • Year: 2008 • Made in: Japan • Serial number: DV005HD1472 • Equipment: Rotary/indexing table, unused since new • Machine connected and available for inspection/testing.

Condition: ready for operation (used), Year of construction: 2008, This 3-axis MORI SEIKI NV 5000 alpha1 was manufactured in 2008. It features an X-axis travel of 1020 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine has a weight of 7300 kg and includes a central spindle cooling unit, along with a Blum laser tool measurement system. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NV 5000 alpha1 vertical machining centre we have for sale. Contact us for further details. • Machine weight: 7300 kg • X-Axis: 1020 mm • Y-Axis: 510 mm • Z-Axis: 510 mm Lhodpjz Akr Hofx Abysl • 3-AXIS: 3 • Main electronic connection: 200 V, 3-phase, 50 Hz • Power consumption: 48 kVA • Machine type: Vertical Machining Center • Year: 2008 • Made in: Japan • Serial number: NV501HB5475 • Equipment: Central spindle cooling unit • Tool measurement: Blum laser tool measurement system with A2 reference • Workpiece measurement: Renishaw OMP probe

Condition: used, Crane magnet, lifting magnet BAKKER MAGNETICS Type: BM 400 Year of manufacture: 1998 Load capacity: 400 kg Magnet surface size: 190 x 155 mm Own weight: 36 kg With manual switching lever Crane ring eye for attachment Load capacity 400 kg at 0.0 mm distance to the material and minimum material thickness of 30 mm. Ljdpfxjxciwhe Abyehl

Condition: good (used), Year of construction: 2007, swing over cross-slide 935mm, swing over cross-slide 738mm, Maximum cutting diameter 620mm, Maximum cutting length 2158mm, Bar capacity 130mm, Spindle speed 2,400rpm, Lhsdpez D H Nuofx Abyel Main spindle power 30 Kw, 12 station turret. Mori Control M730BM, swarf conveyor, 3 jaw chuck, fixed steady.

Condition: used, Year of construction: 1996, operating hours: 48,257 h, functionality: fully functional, machine/vehicle number: 299, Equipment: documentation/manual, Mori Seiki SL150 & Iemca short bar feeder. Ledpfx Aszg A Saebyshl The machine is fully functional. 12-Station Turret with Tool Holders MSC-518 (Fanuc ) CNC Control 8″ Hydraulic Chuck 2 Step gear spindle for powerful torque Hydraulic Tailstock with Power Quill Chip Conveyor Coolant System. Automatic Lubrication system Parts catcher

Condition: good (used), Year of construction: 1990, CNC machining center Manufacturer: MORI SEIKI Type: Partner M300 A-1 Year of construction: 1990 Control: FANUC O-M Travel distances: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse: 24 m/min Feed rate up to 5 m/min Spindle: Ball screw: 36 mm diameter Feed drives FANUC AC X/Y-axis Model 5, Z-axis Model 10 Main spindle speed: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: + / - 2 sec. Repeatability: + / - 1 sec. Pallet clamping force: 3,400 kg Workpiece weight max.: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 sec. Collet clamping time: 7 sec. Tool diameter max.: 110 mm Tool length max.: 250 mm Tool weight max.: 8 kg Special accessories: Workpiece end display with alarm light Lodpfx Abet Rg E Seyehl Magazine for 30 tools Operating hours display Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Space requirement: 1,900 x 2,300 mm 21926

Condition: used, Year of construction: 1986, Mori Seiki MV45/45 from 1986 with Fanuc 11M control, 820 × 555 × 550 mm travels, BT 45 spindle (4.500 rpm, 7,5 kW) and Kitagawa 4th axis for simultaneous 4-axis machining. Professional through-spindle coolant retrofit by Deuschle (15 bar, M50-switched, rotary union through pull stud) and two mechanical gear stages deliver 200 Nm torque; box guideways ensure rigidity. Includes approximately 75 BT 45 tool holders with through-coolant passage and 20 pull studs. CNC CONTROL Controller: Fanuc 11M AXES Number of controlled axes: 4 Number of simultaneous axes: 4 X-axis travel mm: 820 Y-axis travel mm: 555 Z-axis travel mm: 550 4th axis / rotary table: Kitagawa SPINDLE Max. spindle speed rpm: 4.500 Spindle power kW (S1/S6): 7,5 / 5,5 Spindle torque Nm: 200 Spindle taper / interface: BT 45 Gearbox stages / speed ranges rpm: 2 COOLING Coolant through spindle bar: 15 Lhedpfozy Svujx Abyjl EQUIPMENT & OPTIONS • Box guideways (flat slideways) — very rigid, stable machine • 4-axis simultaneous: Kitagawa 4th-axis rotary unit, hydraulically clamped, fully integrated in the control • Spindle with 2 mechanical gear stages — high torque, 200 Nm in low gear • Through-spindle coolant (IKZ) retrofitted by Deuschle: rotary union through the pull stud, hydraulic clamping/release with pressure intensifier, own 15 bar pump switched via M50 • Chip conveyor at the front, discharging to the right • Approx. 75 BT 45 tool holders included, all with through-coolant passage, plus about 20 pull studs • 4th axis (rotary table)

Condition: new, For sale is a new, unused three-phase electric motor, LOHER ANGA-355LB-04A, with a power rating of 270 kW. The motor comes from warehouse stock (NOS – New Old Stock). It has never been installed or used. Its technical and visual condition is very good, with only minor signs of storage. Manufactured in Germany, it features a robust, industrial design. It is ideally suited for driving pumps, fans, compressors, crushers, conveyors, and other industrial machines. Lhjdpfjzn Awxox Abysl Technical specifications: Manufacturer: LOHER Model: ANGA-355LB-04A Power: 270 kW Rotational speed: 1490 rpm Frequency: 50 Hz Voltage: 400/690 V (Δ/Y) Voltage range: 380–420 V Δ / 655–725 V Y Power factor (cos φ): 0.85 Protection class: IP55 Insulation class: F Mounting design: IM B3 Standard: EN 60034 / IEC 38 Country of manufacture: Germany

Condition: excellent (used), Year of construction: 2007, Mori Seiki NH6300 DCG Horizontal Machining Center Installation year: 2007 BT 50 spindle, 10,000 rpm High-pressure coolant through the spindle, 50 bar, with a dedicated paper filter tank 10 pallets, 630 x 630 Continuous B-axis Axis travels: X900, Y800, Z980 Ledpez Ea Dhjfx Abyshl 180-position tool magazine Tool breakage detection in the magazine Dust extraction system FMS Fastems linear 10-pallet system (5+5) 2 loading stations

Condition: used, Year of construction: 2022, Equipment: photoelectric sensor for product detection, floor stand with printhead holder, status display, 3x 1l solvent, 1x 1l ink, cleaning unit, table, character height: 2-10mm, max. speed: 1,148characters/s, voltage: 100-120VAC/200-240VAC, phases: 1, frequency: 50/60Hz, current consumption: 1.2/0.6A, length: 400mm, width: 320mm, height: 527mm, weight: 27kg, operating hours: 155h, an on-site inspection is possible. Lhjdpsz Egd Ujfx Abyol

Condition: ready for operation (used), Mapal MN5364-08-KF collet chuck, DIN 69882-7, with axial length adjustment, Ø 16 mm, DIN 4000-89-HSK - hollow shank taper base, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ljdpfx Asi Eb Abobyshl

Condition: good (used), functionality: fully functional, power: 130 kW (176.75 HP), fuel type: diesel, overall weight: 19,630 kg, Year of construction: 2017, operating hours: 9,130 h, Equipment: adjustable boom, air conditioning, all wheel drive, cabin, gripper hydraulics, hammer hydraulics, Hitachi ZW170W-6 wheeled excavator, year 2017, with only 9,130 operating hours. Fully serviced, clean condition, immediately ready for use. Equipped with central lubrication system, Oilquick quick coupler. Transport and delivery available. We also provide customs/export documentation. Viewing by appointment, including weekends. Price on request. Lsdpfx Ajyiu Ugobyehl

Condition: like new (used), Year of construction: 2010, operating hours: 76,482 h, turning length: 800 mm, turning diameter: 430 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 455 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 6,000 rpm, feed length X-axis: 455 mm, feed length Z-axis: 430 mm, workpiece weight (max.): 5 kg, total height: 8,500 mm, total length: 2,500 mm, total width: 2,495 mm, overall weight: 8,500 kg, CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø: Ø430 Turn-mill spindle X-axis travel mm: 455 Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12000 Drive power kW: 9/5.5 Y-axis travel mm: ±105 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6000 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Coolant gun Working time hours Under power: 76482 Spindle 1: 14010 Spindle 2: 4306 Potencial nominal kVA: 48 Basic machine dimensions / weight Length mm: 2500 Width mm: 2495 Height mm: 8500 Ljdpfoy Rpq Tsx Abyehl Weight kg: 8500

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO Ledpfx Aoxabc Robyjhl engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: used, power: 91 kW (123.73 HP), gearing type: automatic, fuel type: diesel, empty load weight: 12,400 kg, operation weight: 12,400 kg, tire size: 10.00-20 / 13mm, axle configuration: 4x4, first registration: 05/2000, next inspection (TÜV): 02/2021, suspension: steel, total length: 7,000 mm, total width: 25,500 mm, total height: 30,000 mm, front tire size: 10.00-20 / 13mm, driver cabin: day cab, wheelbase: 2,400 mm, Equipment: air conditioning,

Condition: excellent (used), Hitachi X-MET8000 Optimum – Handheld XRF Spectrometer The device has only 119 measurements!!! For sale is a professional, portable Hitachi X-MET8000 Optimum (Oxford Instruments) X-ray fluorescence spectrometer from 2017, designed for fast and non-destructive analysis of elemental composition and identification of metal alloys. Lhjdpoztpu Iofx Abysl Device condition: very good. The spectrometer is offered in a comprehensive set, including a carrying case, two batteries, a charger/power supply, accessories, documentation, and certified reference material from MBH Analytical. The device is equipped with Alloy_FP and Alloy_LE_FP calibrations. The Optimum model uses an SDD detector and a 6-position filter system, and its analytical range covers elements from Mg to U. Key data: Manufacturer: Hitachi High-Tech / Oxford Instruments Model: X-MET8000 Optimum Year of manufacture: 2017 Technology: XRF – X-ray fluorescence Condition: very good Calibrations: Alloy_FP, Alloy_LE_FP Elemental range: Mg–U Weight: approx. 1.5 kg with battery. The device has 119 measurements!!!

Condition: excellent (used), Year of construction: 2002, Speed: 14,000 sheets per hour Format (cm): max.: 48 x 32 Lodpfjxmhrfsx Abyshl The line consists of: - 4 x Inserter stations - 2 x Card inserter stations with adhesive unit (can also be used as standard inserter stations – top loading) - 1 x Cover feeder - 1 x Duplex sheet inspection unit - 1 x Stapling unit with (Hohner SB 50 heads) 2+2 - 1 x Three-knife trimmer with center cut - 1 x CROSS STACKER RIMA

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 14.000 min/-1 power capacity - main spindel 18,9 / 14 kW max. Torque 100 Nm tool taper HSK A-63 table surface area 630 x 500 mm max. table load 300 kg Swivel range -5 / +110 ° rotation range 360 ° T-slots 7x 14 x 63 mm Ledpfjzyu Umex Abyehl number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm rapid traverse 24 m/min Feed force 4,8 kN feed speeds 1 - 24.000 mm/min total power requirement 25 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DMG MORI SEIKI - DMU 50 - 5 Axis - swivable rotary table