Used Jks Multihead Moulder for sale (816)

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, height adjustment type: mechanical, RM Group Spindle Moulder (Under Spindle) Specification: • Condition - used, fully serviced • Manufacturer - RM Group • Model - SM 110 Fpsdjw Avxbspfx Aatjl • Spindle diameter 30 mm • Motor power 4 kW • Star-delta motor starter • 3 belt-regulated spindle speeds: 6,000 / 8,000 / 10,000 rpm • Manual up/down adjustment • Original paintwork • Extraction port - 120 mm • Year of manufacture - 2009 • Weight - 360 kg • Dimensions: 112 x 75 x 115 cm (L x W x H) Additional information: • Very good, factory technical and visual condition • The presented photos show the actual condition of the item for sale • Possibility to connect and test the machine on site

Condition: used, Used Machine Features and Technical Specifications: - Table size: 800 x 1000 mm - Table opening diameter: 480/380/170/125 mm - Milling spindle taper: MK 5 Fedpozlbqxefx Aatspl - Milling spindle speed: 3000, 4500, 6000, 9000 rpm - Milling spindle height adjustment range: 150 mm - Distance from center of milling spindle to front edge of table: 400 mm - Maximum allowable tool diameter: 250 mm - With wooden stop jaws (can be replaced with metal stop jaws upon request) - With a wooden Her 3 roller feed mechanism - With heavy-duty sliding table; runs on ball bearings along guideways milled to be absolutely parallel Dimensions: 205 x 130 x 150 cm Weight: approx. 800 kg

Condition: used, Technical specifications: Spindle diameter: 35 mm Spindle height: 160 mm Spindle rotation: left/right Electric spindle height adjustment Tilting spindle Adjustable cross-slide arms Dust extraction port: 120 mm Motor power: 5.5 kW Fpjdpjzilp Hofx Aatel Power supply: 380 V Manufacturer: SAC Overall dimensions: Length: 1120 mm Width: 1070 mm Height: 1040 mm

Condition: new, - External dimensions (LxWxH): 450x896x732 mm - Operating range: +5 ÷ -2°C - Evaporation temperature: -10°C - Condensing temperature: +40°C - Ambient temperature: 32°C - Defrosting: Hot gas - Power supply: 230 V / 1+N phase / 50 Hz - Maximum absorbed current: 6.6 A - Maximum absorbed power: 1.2 kW - Nominal absorbed power: 73 W - Refrigerant gas: R452A - Capacity: 1032 W - Nominal power: 0.5 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø254 mm - Airflow rate: 750 m³/h - Air throw: 3 m - Weight: 45 kg - Volume: 0.49 m³ - Hermetic compressor - Air-cooled condenser - Galvanized steel housing - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (only for BT models) - Ambient temperature probe - Defrost end probe - Condensing control probe - Power cable for door heater - Micro-door connection cable - Digital display with temperature indication - Operating status display: - Cooling/Defrost Ibodjxvr T Ejcvyqi Aod - Evaporator fans - Alarm active - Manual defrost button - Audible alarm - High and low temperature alarm - High condenser temperature (dirty condenser) alarm - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - Defrost time exceeded alarm - Faulty temperature probe alarm - Condensing control probe failure alarm - Evaporation temperature at -10°C for MT Fjdpfxsxvr T Ee Aatopl - Condensing temperature at +40°C for MT - Evaporation temperature at -30°C for LT - Condensing temperature at +40°C for LT

Year of construction: 2002, condition: excellent (used), The Sedgwick spindle moulder is designed with a backward tilting spindle - 45 degrees with a forward tilting of 5 degrees. Motor Power 4kw 1.1/4" Spindle diameter Fodpozumtqofx Aatjpl Spindle length 140mm Ex College Machine - Like New Year 2002

Condition: used, Year of construction: 1982, Includes a brand new star-delta switch. Fedpfx Aaezbc D Hstepl Used Good condition Cleaned Functionally tested Overhauled Manufacturer: Martin Type: T23 Year of manufacture: 1982 Machine no.: 82468 Motor kW, increased power: 4.7 / 5.7 Swiveling range: 0 - 45° Motorized / mechanical brake: Foot brake Motor, 2 speeds / pole-changing: yes Speed stages rpm: 3 / 4.5 / 6 / 9000 Right-left rotation: yes Table size l x w mm: 1100 x 950 Milling arbor diameter mm: 30 Milling fence with fine adjustment: yes Socket for feed mechanism: yes Dust extraction connection mm: 100 / 120 Space required approx. L x W x H mm: 1100 x 950 x 1100 Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected Without warranty and guarantee.

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK Fpedpfozv S Aaex Aatol TOTAL CONNECTION 126 KW

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 121386, Weinig automatic infeed system For continuous feeding of uniform and random length pieces into a planer/moulder with short infeed table. Flat magazine with accelerator, Workpiece dimensions: 1800 - 6100 mm Touch control for forward and reverse movement 4-roller accelerator. Fsdpfjyt R S Nox Aatjpl With four driven feed rollers. The first two feed rollers are electro-pneumatically moved via light barrier. Drive motor frequency controlled 3 kw Infeed speed 10 - 120 m/min. Height adjustment to workpiece thickness manually via hand crank The accelerator is operated from the control panel fitted to the accelerator. The feed speed is adjusted by a potentiometer with digital readout. Transport length x width approx. 1800 x 6500 mm Possible to supply with moulder Powermat 2400, year of production 2015 The price of a complete set 69000

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 121385, Four-side planer Weinig Powermat 2400 - year of production 2015 TECHNICAL PARAMETERS planing width 20 - 230 mm planing height 10 - 160 mm 1 spindle 18,5kW 2 spindle 11 kW Fsdpfjytfghox Aatjpl 3 spindle 11 kW 4 spindle 18,5 kW spindle speed 6000 rpm feed speed electronically variable incl. brake 6 - 60 m/min feed motor power 7,5 kW 6 upper steel pulling rollers 2 rubber upper pulling rollers Automatic central table lubrication Machine dimensions 3300 x 2150 x 1750 mm Possible to supply with Weinig automatic feeding system High-Mech E1 Machine nr. 121386 feed continuously adjustable Feed drive 3 kw the cost of a complete set 69000 eur.

Condition: good (used), Year of construction: 1979, functionality: fully functional, Four-sided planer / moulder Unimat 22N, 7 spindles Year of manufacture 1979 S/N 286512746 Manufacturer Weinig Germany planing width 220mm Planing height 120 mm 7 planer shanks: planing table length 2000mm Spindle arrangement (speed of the working spindles 6000 rpm) Fpsdpfxst Eu Hto Aatel 1. bottom, 4 kW 2. left, 5,5kW 3. right, 7.5 kW 4. left, 4 kW 5. top, 7.5 kW 6. bottom, 7.5 kW 7. bottom, 4.0 kW 5, 6, 7 with counter bearing 3 rollers in the table (not driven) spindle diameter 40 mm Flying circle of the dressing spindle 125mm Flying circle of the dressing spindle 100-180mm Largest flying circle of the milling spindles 180mm Cardanic feed Feed infinitely variable (frequency converter) 6-36 m /min. Manual Waxilit pump External dimensions L 4500 mm x W 1600 mm x 1700mm 4500 kg with 7 planer/knife heads included

Condition: good (used), Code: 0459 Brand: SICMA - ITALY Model: F 700 N - CE Standard Fedjzn Agtspfx Aatjpl Spindle moulder for milling and jointing operations on wood, plastics, composites and various other materials – CE Standard Table dimensions 1000 x 800 mm Rotational speed 3000/4500/6000/8000 rpm Max diameter 250 mm Mechanical spindle height indicator Motor 4,5 Hp Aluminium guides Safety guard N° 2 suction inlets diameter 120 mm Overall dimensions mm 1100 x 800 x 1100 h Weight kg 800

Condition: used, Hofmann under-table milling machine Spindle adjustable up and down, and at an angle from -25 to +45 degrees, electrically Interchangeable spindle shank, diameter 40mm Long tables, 270cm with extension Culaga adjustable electrically with AIGNER fences 4-roller feed system Spindle speed continuously adjustable from 1000 to 10,000 rpm 11KW motor Left-right rotation Spindle lock Brake Fsdpfezh E Uaex Aatopl The machine has a new, non-original control system. The milling machine is in working condition and ready for operation.

Condition: good (used), Year of construction: 1990, Maximum cross-section of finished workpieces: 220 x 120 mm Minimum cross-section of finished workpieces: 25 x 6 mm Minimum workpiece length: 300 mm Feed length: approx. 2000 mm Diameter of the cutter shaft: 40 mm Diameter of the cutter heads (4 cutters each): 120 mm Maximum diameter on the left and right vertical shafts: 160 mm Infinitely variable feed rate: 0-30 m/min Dimensions: approx. 3980 x 1750 x 1530 mm Weight: approx. 1800 kg Fpjdpozfy Ntjfx Aatel The data was taken from a brochure, therefore no guarantee is given.

Condition: good (used), Year of construction: 1993, functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 7,500 W, height adjustment type: electric, planer shaft diameter: 50 mm, number of spindles: 8, input frequency: 50 Hz, Equipment: cabin, motor brake, 8 spindles, Working width: 230 mm, working height: 180 mm, spindle diameter: 50 mm, feed rate: 7.5 kW / 6 - 36 m/min, Spindle arrangement: 1-bottom (7.5 kW) - scoring spindle 2-bottom (7.5 kW) 3-Right (11 kW) 4-Left ( 11 kW) 5-Top (11.0 kW) Fpodpfx Aajr Axwnjtjl 6-Bottom (22.0 kW) 7-Bottom (7.5 kW) 8-Top (7.5 kW) 8 driven rollers in the table

Condition: excellent (used), Blade: Z 6 Cutting diameter: 150 mm Bore: 50 mm Length: 150 mm Fpjdpfxszxb U Rj Aatsl Clamping: Hydraulic Price per piece.

Condition: repair required (used), Year of construction: 1991, Tilting spindle moulder Manufacturer: Panhans Model: 240 Fsdpjx Tgtwjfx Aatspl Year of manufacture: 1991 The electronic angle value detection (actual value) is not functional. Table: 135 x 80 cm Power: 11 kW Tilting range: -5° to +45° Angle adjustment: Electric Height adjustment: Electric Spindle speeds: 3/4.5/6/9,000 rpm Left/right rotation: Yes Motor brake: Yes Weight: approx. 780 kg Incl. power feed

Condition: good (used), Year of construction: 1989, functionality: unexamined, working width: 220 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 120 mm, overall weight: 7,500 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 10, power: 105 kW (142.76 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, working height: 120 mm, spindle diameter: 50 mm, Feed rate: 7.5 kW / 8- 40 m/min, Spindle arrangement: 1-bottom (7.5 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW)- with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydraulic clamping 7-Bottom (7.5 kW) - with hydraulic clamping 8-Top (7.5 kW) - with hydraulic clamping and straight jointer 9-bottom (7.5 kW) - with hydraulic clamping and straight jointer 10-Uni (7.5) 6 driven rollers in the table Fpsdpfx Aou Udd Soatel

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Fodpfxszv S D Rj Aatspl Possible to offer with additional Weinig bundling system if needed.

Condition: used, Year of construction: 2022, machine/vehicle number: 105823706, input voltage: 400 V, year of last overhaul: 2022, Bread round-moulding and long-moulding machine, manual operation, for all wheat and rye doughs with a rye content of up to 90% and a water absorption of 172%, Eberhardt spherical round-moulding principle with superimposed moulding motion, moulding stroke adjustable in 3 steps, round-moulding or precise transfer to long-moulding, long-moulding system with steplessly adjustable roller pair with Teflon running surface, dough feed on the right, Liftomat dough handling device for transferring dough from the dough divider to the round-moulding machine, S/N 4293706. Fpodozgtxkjpfx Aatjl

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, working width: 220 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 140 mm, power of feed motor: 15,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 7, input frequency: 50 Hz, Weinig Hydromat 22 BL 7 spindles, Working width: 220 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 15 kW / 6 - 60 m/min, Beesjj3Vck9 Spindle arrangement: 1-bottom (7.5 kW) with hydraulic clamping 2- Right (11 kW) 3-Left (11 kW) Fpsdeulnr Aspfx Aatol 4-Top (11 kW) 5-bottom (7.5 kW)-with hydraulic clamping, straight jointer and profile jointer 6-Top (11 kW) with hydraulic clamping, straight jointer 7-bottom (11 kW) - with hydraulic clamping, straight jointer and profile jointer 6 driven rollers in the table

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, workpiece height (max.): 300 mm, type of input current: three-phase, workpiece width (max.): 220 mm, This machine is in very good condition, was not used as much as anticipated. Fpodpfx Aezifmlsatsl

Condition: used, Year of construction: 1968, Unit can be swiveled. Unit can be moved left and right via handwheel. Maximum milling depth: 150 mm - 180 mm. Slot length: approx. 250 mm. Weight: approx. 320 kg. Fpedpfxszkl T Us Aatjl Storage location: Nattheim.

Condition: good (used), Year of construction: 1997, functionality: fully functional, planer shaft diameter: 40 mm, Equipment: cabin, 7 Spindle Scm Moulder: Max Working width 230mm Max Working height 160mm Feed Speed 5-40 M/min Diameter of spindles Ø40mm Spindle configuration: 1 Bottom 5.5 Kw 2 Right 5.5 Kw Fpsdpfoyfm Ttox Aatol 3 Left 5.5 Kw 4 Top 5.5 Kw 5 Bottom 5.5 Kw 6 Top 5.5 Kw 7 Saws/ Bottom 22 Kw Machine comes with some parts and tools incl 4 New 6 knife spindles Ø163x240xØ40 + One full set of tools on the machine.

Condition: excellent (used), Year of construction: 2005, working width 230mm working height 120mm Fsdpfxjzxx Dij Aatepl 6 spindles spindles set: bottom/right/left/top/top/bottom second top spindle with Powerlock toothened roll in the infeed table spindles diameter 40mm spindles speed 8000 RPM Power Com controller variable regulated feeder 5-30m/min

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 36 m/min, working width: 230 mm, planing height: 160 mm, planing width: 230 mm, working height: 160 mm, total width: 2,400 mm, total height: 1,800 mm, power of feed motor: 5,000 W, jointer table length: 1,200 mm, table length: 1,200 mm, number of spindles: 7, 7-spindle moulder with 6 PowerLock spindles. Fpsdpfxoy At Efs Aatol All spindles are electronically controlled (except for the planer head). CNC PowerCom control. Working width: 20-230 mm, Working height: 8-160 mm, Feed speed: 6-36 m/min, 5 kW, with electronic variable speed drive. 1.2 m infeed table. Automatic lubrication pump (Waxilit). 8 pneumatic pressure shoes and 3 rollers on the table. Configuration: Bottom horizontal spindle 5.5 kW Right vertical spindle 7.5 kW with PowerLock Left vertical spindle 7.5 kW with PowerLock Right vertical spindle 7.5 kW with PowerLock Top horizontal spindle 11 kW with PowerLock Bottom horizontal spindle 11 kW with PowerLock Top horizontal spindle 11 kW with PowerLock Fully reconditioned four-sided moulder.