Used Kaiser Lowbed for sale (448)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 12,800 kg, maximum load weight: 44,200 kg, overall weight: 57,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are individually tailored to customer specifications. Chassis, Low-bed Semi-trailer Steel welded construction, drawbar plate with interchangeable 2 kingpin and 2 kingpin positions 24 tons, 2-speed landing gear, one-sided operation Foldable rear support 2 chock blocks with holder Aluminum side guard 1 plastic toolbox, with insert tray, w=620/h=360/d=440 mm, lockable with a padlock Extendable widening sections to 3,000 mm Storage compartment for timber planks on gooseneck, transverse at the front Timber planks 70 mm for widening to 3,000 mm Dwedji Ri Hnopfx Adrja Telescoping Central tube frame in cleanly welded, interlocking telescoping frame sections. Extendable by a maximum of 6,000 mm and lockable approximately every 1,000 mm Locking with mechanical pin lock With sliding platform Tie-down eyes, low-bed 2 pairs of ring-type tie-down eyes, each 5 tons, at the front on the gooseneck; 11 pairs of tie-down loops embedded at the top and side in the outer frame, each 10 tons; 2 on the gooseneck, 9 distributed in the low-bed area; first tie-down eye 250 mm from the front and last at most 250 mm from the rear, spacing of tie-down eyes not greater than 1,100 mm 8 pairs of socket pockets embedded in the outer frame, inner dimensions 70 x 40 mm, (can be converted to 5-ton ring-type tie-down eyes, not included in the scope of supply) 3 pairs of folding tie-down eyes additionally embedded in the low-bed area, each 10 tons; 1 at the front of the low-bed, 1 in front of the 1st axle, and 1 behind the 3rd axle Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption Last 2 axles steerable, with automatic reverse locking via reversing light and manual locking function via a button on the vehicle Air suspension with lift and lower valve Wheels and Tires 235 / 75 R 17.5, manufacturer Fulda Steel rims in twin configuration, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab; truck must be appropriately prepared; no truck installation (no calibrated scale) 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 LED revolving beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning panels, double LED-lit and extendable to 3,000 mm 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel / chequered plate surface Storage box embedded in the ramp to the gooseneck Then with 70 mm soft wood floor, steel/chequered plate surface in the wheel arch area Rear slope with 70 mm soft wood floor Side Walls 25 mm aluminum hollow profile, 400 mm high, at the front and side on the gooseneck, pluggable Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally movable Covered with wood Hydraulically operated via tractor PTO with flow control Hydraulic connection with SVK coupling NW 10/3, without connect

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,200 kg, maximum load weight: 8,300 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 4,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, total length: 6,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis: Central axle trailer, low-bed Dsdji Ri Ebopfx Adrswa Fine-grain steel welded construction Gear-supported front leg Telescopic rear support 2 chock blocks with holder Fenders made of sheet steel over both wheels Side impact protection, aluminum Coupling device for central axle trailer Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (rocker equalization) Wheels and tires 235 / 75 R 17.5" according to manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable Platform TTS Low-lying steel pan, platform floor made of steel/diamond plate, steel walls solidly welded to the floor Platform length 4500 mm Pan front and side with "Load-Lock profile" for attaching lashing straps (8 pieces at the front, 12 pieces on each side) Note: Slight floor waviness due to welding distortion is possible! 2 pairs of lashing eyes, 1 x at the front in the corners of the steel pan and 1 x at the rear in the floor, each 5 tons. Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally movable with handrail on the ramps covered with wood (tip area with steel/diamond plate) with gas spring for single-person operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of approval/signs Country of approval: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame painted or galvanized, according to customer requirements Ramps, hot-dip galvanized Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: used, mileage: 1,05,000 km, power: 110 kW (149.56 HP), first registration: 03/2018, fuel type: diesel, overall weight: 3,500 kg, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Ref-No.: 231 Very well-maintained NISSAN with KAISER body * NISSAN NT 400 * 4x2 wheel configuration * GVW 3,500 kg * Leaf spring suspension (front/rear) * Manual transmission * 3-seater cab * KAISER suction/pressure combination jetter Dwedjyhkcdspfx Adrja * Dietmar Kaiser Defco Combi * Vacuum pump 324 m³/h * High-pressure pump 100 l/min 150 bar * Tank capacity 765 L + 660 L * Remote control for body * Differential lock * Radio * Tow hitch, 3,500 kg * Very good condition * VAT deductible * Net price: €52,900 Trade-in possible Financing available from 4.99% Errors and prior sale excepted! The details in this advertisement are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability for possible typographical or data transmission errors. Listed features must be checked separately. All details in the advertisements are non-binding! Nationwide delivery available on request Opening hours: Monday to Thursday 9:00-17:00 Friday 9:00-14:00 and by appointment!

Condition: used, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, loading space height: 200 mm, total length: 11,600 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: red, Additional information Chassis: Steel welded construction, double-curved with a low-bed section in front of and behind the axle unit, the low-bed section is angled for easier access, turntable with robust ball bearing race, foldable rear support, chocks, side impact protection, quarter-panel fenders Lashing points: above the front axle: 2 pairs of ring lashing points, each 5 tons, at the front on the low-bed section / rear axle: 6 pairs of lashing points on the side in the low-bed section, each 8 tons. 6 pairs of lashing points, each 5 tons, between the longitudinal beams, a pair of pocket recesses embedded in the outer frame, internally 70 x 40 mm, or instead of pocket recesses, 5-ton ring lashing points embedded in the floor Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Braking system: 2-line pneumatic braking system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front Electrical system: 24 volts, multi-chamber lights, yellow side lighting, 2 white position lights at the front Dwsdpei Ri N Ujfx Adroa 2 white/red outline marker lights at the rear, rotating beacon with bracket, pair of illuminated and extendable warning signs up to 3,000 mm, 2 x 7-pole non-interchangeable connectors at the front Floor: curved section at the front with steel/diamond-plate covering, storage compartment embedded in the access ramp to the curved section, driving lane area and in the center between the beams with steel/diamond-plate covering, rear slope with 70 mm softwood floor, low-bed platform including rear slope 5900 mm Ramps: mounting rail for aluminum ramps over the entire width, as a U-profile over the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg Storage compartment for ramps between the beams Approval: contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear

Condition: used, mileage: 2,14,535 km, power: 245 kW (333.11 HP), first registration: 04/1985, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: mechanical, Very well-maintained suction and jetting combination unit from the Swiss manufacturer Kaiser. - Scania 112 6x4, first registration: 02/1985, mileage: 214,000 km Djdpfx Ajw Ik Dusdrowa - Kaiser Kanal Jet Combi - Kaiser M13 vacuum pump - KDU 300 high-pressure pump - Partition wall - Kaiser suction boom - Hose reel 120 m, 1" - Manual hose reel Financing options available through our partner banks. We are happy to assist you further. Please note: We expressly reserve the right to prior sale, as this item is also advertised on other platforms. Accessory details provided without guarantee. Subject to change, prior sale, or errors. We explicitly recommend and encourage inspection and testing so that the buyer has a clear understanding of the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001012243, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 630 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", color: blue, Please note that the images are archive images! The vehicle may be in use. Additional information: Chassis: Central axle semi-trailer, low-bed Fine-grained steel welded construction, geared support leg at the front, telescoping rear support, chocks with holder, mudguards made of sheet steel over both wheels Coupling device: Central axle semi-trailer Drawbar with tested 40 mm drawbar eye, drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Dwjdpfx Adsqmc Rajrja Euro axles of our choice, with tapered roller bearings and S-cam brakes, axle/chassis laser-aligned, reducing tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Braking system 2-line compressed air braking system, spring-loaded parking brake, 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin connector at the front, with connecting cable Platform TTS low-lying steel trough, platform floor made of steel/checkered plate, steel walls welded solidly to the floor, platform length 5500 mm, trough with Load-Lock profile at the front and on the sides for attaching lashing straps (8 pieces at the front, 16 pieces on each side) Note: Slight unevenness in the floor may occur due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel trough and 1 x at the rear in the floor, each 5 tons. Additional pair of lashing eyes in the floor, each 5 tons Loading ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with handrail on the ramps, covered with wood, with gas spring for single-person operation Operating instructions The stated total weight is technically possible; depending on the load, the total weight may not be reached while adhering to the permissible axle/support and saddle loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Registration country/signs Registration country: Germany, with Dekra approval and certificate (according to §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Please note that the images are archive images! The vehicle may be in use.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,680 kg, maximum load weight: 35,320 kg, overall weight: 50,000 kg, axle configuration: 3 axles, loading space length: 10,300 mm, loading space width: 2,520 mm, loading space height: 600 mm, total length: 15,400 mm, total width: 2,550 mm, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Folding rear support 2x chock blocks with holder Aluminum side impact protection Quarter panel fenders in front of and behind the axle assembly with splash flaps behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted crosswise at the front on the floor of the gooseneck, with 2 storage trays Extendable widening elements up to 3,000 mm (not in rear slope)(However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on the gooseneck, at the front, crosswise Wooden planks 70 mm for widening to 3,000 mm Excavator arm recess starting above the rear axles to the rear, approx. 500 mm wide and approx. 230 mm deep Tie-down points: Low-loader 3 pairs of tie-down points, each 10 tons, at the front of the gooseneck, 8 pairs of tie-down points, each 10 tons, in the low bed, 3 pairs of tie-down rails in the wheel track area of the low bed, 3 pairs of tie-down points, each 10 tons, in the axle/rear area Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption with steering axle Air suspension Wheels and tires 235 / 75 R 17.5 as chosen by the manufacturer Steel rims in twin arrangement, factory silver Braking system Dwedpsi Ri Hgjfx Adrsa 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, without connecting line with lift & lower valve, hold function in the lowered position + auto-reset function Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Vehicle - Driving stability system Trailer Info Center, for displaying vehicle data such as axle loads (no calibrated scale), mileage and diagnostic/system messages Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front 1x additional LED work light at the rear 1x LED rotating beacon with holder, switched via parking lights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel/diamond plate covering in the wheel track area with 70 mm softwood floor, in the wheel arch area steel/diamond plate covering, low bed on the left and right in the wheel track area can be hydraulically raised for entry, via truck auxiliary drive Rear slope with 70 mm softwood floor Low bed length approx. 6,300 mm Side walls 25 mm aluminum hollow profile, 400 mm high, can be plugged into the front and side on the gooseneck Ramps Steel ramps 2,800 mm long, 750 mm wide Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown i

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,800 kg, maximum load weight: 29,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,350 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,650 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Tailored Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with interchangeable 2 kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower section and straight connection plate, with stroke compensation Foldable rear supports Wheel chocks with holder Aluminum side underrun protection Splash guards in front of the 1st axle and behind each axle with anti-spray, according to EC Toolbox, stainless steel, w=600/h=400/d=500 mm, with polished door, lockable Hydraulic lift table after gooseneck, approximately 3000 mm long, hydraulically raised for crossing the gooseneck, with mechanical locking in the raised position. Operated with a wireless remote control Electric winch, 24 volts, pulling force 8165 kg, mounted centrally at the front on the gooseneck loading area, in a stainless steel box with a door (if technically possible, further review required), operated with a wireless remote control, cable length 35 m x approx. 10 mm, with roller cable guide and removable guide rollers on the gooseneck and rear slope. Tie-down points: Low-loader Gooseneck: 5 pairs of tie-down points recessed in the outer frame, each with 5 tons. 2 pairs of tie-down points in the middle, each with 5 tons. 1 pair of tie-down eyes recessed at the top and outside in the outer frame in the neck slope, each with 10 tons. Main platform: 4 pairs of tie-down points recessed in the outer frame, each with 5 tons. 4 pairs of tie-down points in the middle, each with 5 tons. 1 pair of tie-down eyes recessed at the top and outside in the outer frame, each with 10 tons. Rear platform: 4 pairs of tie-down points recessed in the outer frame, each with 5 tons. 5 pairs of tie-down points in the middle, each with 5 tons. 4 pairs of tie-down eyes recessed at the top and outside in the outer frame, each with 10 tons. Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption Last axle with steered trailing arm, with automatic reversing lock via reversing light, and additional locking function on the vehicle via a hand button Air suspension with lift/lower valve, with holding function for lowering + auto-reset function Wheels and Tires 235 / 75 R 17.5 According to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air brake system Spring brake parking brake Djdpfx Aoi Ri E Uodrowa Vehicle - Driving Stability System Axle load recognition via EBS-CAN bus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) 2 fail-safe coupling heads in front, without connection cable EBS, Electronic Braking System with EBS socket in front, without connection cable Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights in front 2 white/red side marker lights in the rear Lights completely in LED version 2 x 7-pin and 1 x 15-pin fail-safe sockets in front Additional LED work lights, at the rear, switched via reversing light LED rotating beacon with holder, switched via parking light Pair of warning signs, double LED illuminated and extendable to 3000 mm Floor Gooseneck with Mega Grip, covered with interlocking grating/low-loader platfo

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 26,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, low-bed semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions, 24 tons, 2-speed landing gear, single-sided operation, with straight lower section, without thrust compensation Rear support, foldable 2 wheel chocks with holder Aluminum side impact protection Mud flaps at the rear, covering the entire width Fenders in front of the 1st axle and at the rear of each axle with anti-spray, according to EC Extendable widening elements to 3,000 mm (not in rear slope) Storage compartment for timber planks in the center of the loading area Timber planks 70 mm for widening to 3,000 mm Tie-down points, low-bed 2 pairs of ring tie-down points, each 5 tons, at the front on the gooseneck 11 pairs of tie-down mushroom heads, recessed at the top and side in the outer frame, each 10 tons 2 x on the gooseneck 9 x distributed in the low-bed area First tie-down point 250 mm from the front and last max. 250 mm from the rear, distance between tie-down points not greater than 1100 mm 8 pairs of beam pockets recessed in the outer frame, inner dimensions 70 x 40 mm (can be converted to 5 ton ring tie-down points) Axles + Suspension Dwsdei Ri E Rjpfx Adroa SAF drum brake axles Air suspension Wheels and tires 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Color-coded line routing for easy service. Spring parking brake EBS, electronic brake system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front, without connection cable with lift and lower valve Axle load recognition via EBS-CAN bus signal, for display on the instrument panel in the cab Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable 1 LED rotating beacon with holder 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel sheet covering Storage box recessed in the ramp to the gooseneck followed by 70 mm softwood floor, in the wheel arch area steel/diamond plate covering Rear slope with 70 mm softwood floor Low-bed area including rear slope 9,200 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via tractor's auxiliary drive with throttle, operation on the left side Hydraulic connection with SVK socket NW 10/3, without connecting hoses Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, Low-loader Semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without lateral support Foldable rear support 2 chock blocks with holder Aluminum side protection Fender fairings in front of and behind the axle assembly 1st pair of wheel recesses integrated into the gooseneck area in the low-bed section, angled for easy entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader models with detailed specifications (if the overall height is exceeded). Wheel recess cover, retractable from the main frame, with wood inserts. Extensions retractable to 3,000 mm (not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for timber planks on the gooseneck, across the front Timber planks, 70 mm, for extension to 3000 mm Tie-down points for low-loader 2 pairs of ring-type tie-down points, 5 tons each, at the front on the gooseneck 11 pairs of tie-down eyes integrated into the top and side of the outer frame, 10 tons each 2 x on the gooseneck, 9 x distributed in the low-loader area, first tie-down point 250 mm from the front and last max. 250 mm from the rear, spacing between tie-down points not greater than 1100 mm 8 pairs of stake pockets integrated into the outer frame, inner dimensions 70 x 40 mm, or, instead of stake pockets, 5-ton ring-type tie-down points embedded in the floor Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at the front, without connection cable 2 keyed coupling heads at the front With raise and lower valve Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab; truck must be suitably pre-equipped. Vehicle - Driving Stability System Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole keyed sockets at the front 1 x LED rotating beacon with holder, switched via side lights 2 pairs of warning signs, double LED illuminated and retractable to 3,000 mm, detachable with connector Floor Gooseneck with steel/non-slip steel plate Storage box integrated into the access slope to the gooseneck Then with 70 mm softwood floor, in the wheel recesses at the bottom and in the wheel well area, steel/non-slip steel plate Low-loader platform including rear slope, 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, side-shiftable Additional ramp securing at the bottom. Dwedpfsi Ri Hcox Adrea

Condition: used, mileage: 1,96,000 km, power: 294 kW (399.73 HP), first registration: 01/1996, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro2, Equipment: soot filter, - Retarder - Manual transmission - Kaiser superstructure approx. 10,000L - Sewer cleaning Suspension: leaf spring suspension Dedpfxoy Ea I Se Adrswa

Condition: good (used), 165 USED Jama Kaiser Roll Marking Machine. Machine for marking Kaiser rolls. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Dsdpfx Adsxl Rkherewa We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: used, functionality: fully functional, empty load weight: 11,500 kg, maximum load weight: 27,500 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 06/2014, loading space length: 13,650 mm, loading space width: 2,520 mm, loading space height: 3,150 mm, total length: 13,700 mm, total width: 2,550 mm, suspension: air, tire size: 205.65 r 17.5, ground clearance: 750 mm, color: light green, trailer brake: trailer braked, Year of construction: 2014, Equipment: ABS, Used Meusburger lowboy semi-trailer with drop-side extensions, 4 axles with steerable 3rd and 4th axles, 1st axle liftable, recesses in the platform with removable covers, extendable and height-adjustable drop sides, sliding roof cover, rear doors, provision for removable rear ramps, lateral and internal floor lashing points, anchor points for uprights with crossbars running through the platform, tarpaulins suitable for over-width loads with retractable side panels, internal height 3.10m + additional 40cm in the recesses, year 2014, rear stabilizer legs, DEALER: INTERDRIVE SRL-PARMA. Dwjdpfjy T Rurox Adrea

Condition: used, functionality: fully functional, machine/vehicle number: NP9LDR3L0KN187004, maximum load weight: 45,000 kg, Year of construction: 2022, Lider Lowbed trailer, year 2022, type LDR3L. Durable and reliable trailer for heavy-duty transport, in excellent condition. Technical specifications Manufacturer: Lider Type: LDR3L Year: 2022 VIN: NP9LDR3L0KN187004 Maximum gross weight: 45,000 kg King pin load: 17,000 kg Axle loads: 3 × 9,000 kg Total axle load: 28,000 kg Dwedpjxb Ddtofx Adrsa

Condition: new, functionality: fully functional, color: red, DE ANGELIS 3S425 Semi-trailer NEW, READY FOR FIRST REGISTRATION Maximum gross weight: 42,500 kg Tyres: 13 units, size 245/70R17.5'' Vehicle equipped with: - 4.00 x 0.85 m hydraulic loading ramps, wood-covered (non-shifting) - Electro-hydraulic control unit - 1 stainless steel toolbox 600x600x300 mm (ditch side) - Gigant axles - Air suspension - 3rd steered axle - Lashing rings kit - 200 mm high aluminium sideboards on gooseneck FINANCING OR CUSTOM LEASING AVAILABLE ON SITE. WITH TERMS FROM 24, UP TO 96 MONTHLY INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL - NAPLES BRANCH DOMENICO ESPOSITO S.P.A. - EBOLI (SA) BRANCH – OFFICIAL DEALER Dwsdpfxoylayae Adroa MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30–19:00 | SATURDAY 8:30–14:00 WE OFFER A WIDE RANGE OF USED MULTIMAKE COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S Semi-trailer – Refrigerated Tipper Semi-trailer – Lamberet – Schmitz – Isuzu – Fixed Platform – Crane – Tipper – 4 axles – Rear 4 axles – Tway – T-Way-540-460 hp – Xway – X-Way – Three-way Tipper – V8 – Scania – Frost Edition – Curtain-sider – Box body – Tail-lift – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck SRL declines any responsibility for possible discrepancies in technical specification, options, and features that may in some cases differ from what is specified in the description. We recommend verifying the characteristics of the specific vehicle.

Condition: used, functionality: fully functional, empty load weight: 8,000 kg, maximum load weight: 39,000 kg, overall weight: 47,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 13,000 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, first registration: 07/1983, loading space length: 11,870 mm, loading space width: 2,500 mm, suspension: parabolic leaf (spring), color: white, Year of construction: 1983, CTC ZA90SRT47 Semi-Trailer Low-loader 11.87 m with hydraulic ramps and winch (4.10 m + 7.35 m) Djdpfx Aoy Axufedrswa 3 axles Parabolic suspension GVW 47,000 kg – payload 39,000 kg Approved gross train weight for special transports: 56,000 kg Export net price €18,000.00 All information subject to change/errors excepted

Condition: reconditioned (used), functionality: fully functional, empty load weight: 11,200 kg, maximum load weight: 25,600 kg, overall weight: 36,800 kg, axle configuration: 2 axles, first registration: 09/2007, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 500 mm, total length: 13,700 mm, total width: 2,550 mm, suspension: air, tire size: 245.70 R 17.5, color: light grey, trailer brake: trailer braked, Year of construction: 2007, Equipment: ABS, Used Bertoja extendable low-bed semitrailer, year 2007, 2 axles with hydraulic steering, extendable cradle/bed with 4.0 m central beam, closed cradle length 6.20 m, ground clearance 50 cm, adjustable and detachable gooseneck, side deck wideners – ideal for combine harvesters, air suspension, ABS, ride height adjustment valve, inspected until 31.10.2026 – DEALER INTERDRIVE SRL – PARMA Dwedpfxoy A Ih Ij Adroa

Year of construction: 2017, condition: new, machine/vehicle number: 185426043, Backhoe bucket MS21/25 Specifications Dwedpsmwitpsfx Adrea Manufacturer Manfred Kaiser - Maschinenbau GmbH Equipment type backhoe bucket MKS 21 cutting width 800mm Capacity 0,8cbm Weight 710kg Year of manufacture 2017 Features Backhoe bucket 0,8m NEW 4 times available Additional Information Equipment: excavator arm, Purpose: construction, Unloaded weight: 710 kg, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: used, machine/vehicle number: 110, empty load weight: 8,320 kg, maximum load weight: 31,680 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 05/2008, loading space length: 10,300 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 r17,5, wheelbase: 6,500 mm, color: blue, Equipment: ABS, * Drum brake * 4 axles * Wheelbase 6,500 mm * Hydraulic ramp length 2,850 mm - width 650 mm * Loading edge height 920 mm * Can be widened to 3 m Dwsdpfx Aelpav Usdrsa Errors and omissions excepted.

Condition: new, machine/vehicle number: 1, empty load weight: 7,500 kg, maximum load weight: 22,500 kg, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 10,070 mm, loading space width: 252 mm, loading space height: 85 mm, suspension: air, tire size: 245.70 r 17,5, color: yellow, Year of construction: 2022, Equipment: ABS, tail-lift, New Ceylon two-axle semi-trailer, 10.70 m long, with the first axle liftable and the second axle steerable, EBS, air suspension, and 8-ton capacity side twist locks. It features mounting points and anchor slots on the platform for securing straps, double electro-hydraulic ramps with a total length of 4.0 m, and electro-hydraulic operation. The platform height from the ground is 85 cm, and the platform length is 7.0 m. WARRANTY and IMMEDIATE DELIVERY, subject to prior sale. Dealership: INTERDRIVE SRL-PARMA. Dwodpeh Utdlsfx Adrja

Condition: new, machine/vehicle number: 1, empty load weight: 11,000 kg, maximum load weight: 28,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 870 mm, suspension: air, tire size: 245.70 r 17.5, color: dark red, Year of construction: 2020, Equipment: ABS, New Ceylon semi-trailer, ready for registration. Features include: 3 axles, with the first axle liftable and the third axle steering; EBS; double-sided electro-hydraulic ramps; extendable sides; winch preparation; low-level height of 87 cm; length of 9.95 m; overall length of 13.65 m; and Rud couplings. Immediate delivery, subject to availability. Guaranteed. CONCESSIONARIO INTERDRIVE SRL - PARMA. Dodeh S Aw Rjpfx Adrowa

Condition: used, empty load weight: 9,800 kg, maximum load weight: 37,700 kg, overall weight: 47,500 kg, axle configuration: 2 axles, first registration: 09/1999, loading space length: 12,600 mm, loading space width: 2,550 mm, loading space height: 500 mm, suspension: air, tire size: 245.70 r 17.5, color: traffic orange, Year of construction: 1999, Equipment: ABS, nooteboom cradle trailer, 2 axles with air suspension, ebs, 2 tridec steering axles from fifth wheel and adjustable by linkage, lower part 6.0m long x 50cm high from ground, adjustable and releasable neck, payload capacity up to 47.5 tons, year 1999, INTERDRIVE SRL-PARMA CINCESSIONARY Dsdpfxepdqvlo Adrowa

Condition: used, machine/vehicle number: 1, empty load weight: 5,900 kg, maximum load weight: 19,300 kg, overall weight: 25,200 kg, axle configuration: 3 axles, first registration: 12/1982, loading space length: 8,000 mm, loading space width: 2,500 mm, loading space height: 860 mm, suspension: steel, tire size: 8.25 r 15, color: red, Year of construction: 1982, Equipment: center pivot plate, tail-lift, trailer coupling, Ctc trailer with a flatbed and individually adjustable rear ramps with manual spring-assisted operation, mechanical suspension, 8-meter long platform with a payload capacity, 1.50-meter long drawbar, 86cm ground clearance, and a steerable front axle, manufactured in 1982. – POSSIBILITY OF COMPLETE ASSEMBLY AND HITCHING FOR OPERATIONAL VEHICLES – INTERDRIVE SRL – PARMA (DEALER). Dodpjilth Uofx Adrowa

Condition: new, machine/vehicle number: 3, empty load weight: 9,500 kg, maximum load weight: 29,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 850 mm, suspension: air, tire size: 245.70 r 17.5, color: white, Year of construction: 2022, Equipment: ABS, New, factory-fresh Ceylan semi-trailers, available for immediate delivery, featuring double electro-hydraulic ramps, extenders, and Rüd couplings. 10-meter platform, 85cm ground clearance. Options include grated ramps and EBS. Three axles, with the first axle liftable and the third axle steerable. – Warranty included – INTERDRIVE SRL – PARMA (Authorized Dealer) Dwjdpehzaq Refx Adrea

Condition: excellent (used), functionality: fully functional, empty load weight: 9,800 kg, maximum load weight: 30,200 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 07/2022, next inspection (TÜV): 02/2026, loading space length: 13,800 mm, loading space width: 2,550 mm, loading space height: 870 mm, total length: 13,700 mm, suspension: air, tire size: 245.70 R 17.5, color: red, trailer brake: trailer braked, Year of construction: 2022, Equipment: ABS, tail-lift, Used Komodo low loader semi-trailer with ramps, year 2022, 3 axles with lowered gooseneck platform, 1st axle liftable and 3rd steering, EBS, 10m low deck with ground clearance 87cm, double grating ramps 4.0m long, width adjustable, side extensions, RUD side and floor hooks 8t, removable side boards on neck, air suspension, deck in wood and steel, side toolbox, large neck box, dual speed landing legs, excellent condition, inspected until 28.02.2026 – DEALER INTERDRIVE SRL-PARMA Dwsdpfxjyfwdie Adrea