Used Karl-Müller Hbs 320 for sale (5,289)

Condition: used, first registration: 06/2010, loading space length: 11,350 mm, loading space width: 2,500 mm, loading space height: 950 mm, - Steered axle - Remote control - Hydraulic ramps - Upper loading platform 3500 mm - Lower loading platform 7850 mm Fjdox Dzn Uepfx Ag Aogc

Condition: used, functionality: fully functional, Year of construction: 2008, 1 x used electrostatic bookbinding unit Fgjdjy Uc S Sspfx Ag Aec Manufacturer: Müller Martini Model: 0457.0400 Condition: good, taken from the cutting line of a 16-page roll-fed offset printing press.

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2024, total width: 2,550 mm, Year of construction: 2023, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Fgodpsvy Tvtofx Ag Aec Further information New: No

Condition: new, maximum load weight: 8,770 kg, Year of construction: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with many extras Equipment includes: - 2 spring-assisted lifting devices for 400 mm high steel side walls - Reinforced and certified construction according to EN 12642 XL load securing certificate - 10 UVV lashing rings integrated into the existing external frame hole pattern - Additional wooden floor in clamped design Fgjdpjxcxmfefx Ag Ajc - Tyres: 235/75R17.5 - Four BPW axles instead of GIGANT - Platform extension by 870 mm, total length 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with 45 kg payload capacity Paintwork: - Wheels: silver - Chassis/front wall/drawbar/rear wall/stanchions/ramps: hot-dip galvanized - Axles/springs: black - Side walls: RAL2011 deep orange We are happy to offer you suitable financing, hire purchase or leasing options. Delivery or shipping by arrangement. We always have a selection of new machines in stock, as well as demonstration units. Contact us today! We rent vehicles and machines with or without operator. A wide range of used machines and equipment always available. Technical changes, errors and prior sale excepted.

Condition: used, empty load weight: 9,300 kg, maximum load weight: 14,700 kg, first registration: 02/2001, next inspection (TÜV): 10/2024, total width: 25,500 mm, suspension: steel, tire size: 235 / 75 R 17.5 / 10mm, front tire size: 235 / 75 R 17.5 / 10mm, operation weight: 24,000 kg,

Condition: used, machine/vehicle number: 39500, empty load weight: 8,250 kg, maximum load weight: 31,750 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 05/1995, tire size: 235/75 r17,5 zwilling, color: orange, Further information Main and outer frame made of high-strength double T-profiles, grade ST 52.3, 4-fold longitudinally profiled, with high-strength front and rear ends and crossbars, frame behind the bogie run-through with flat offset offset and rear ramp slope 0.8 m long, lowest floor height due to recessed wheel wells above the rear wheels, front corners of the bogie platform bevelled at 45 degrees. 2 recessed UVV lashing rings each on the bogie platform and the drive-on ramp for attaching tensioning devices Rear end with wide bearings for ramp shaft with 6 bearings. Setiliche protective device with a protective strip according to EC, wheel chocks with clamping safety device Low-maintenance angular roller bearing axles with automatic slack adjusters, dual-line air brake system in accordance with EC and parking brake Bogie and drawbar: : Made of double T-profiles in welded construction with ball bearing slewing ring, standard drawbar length 1500 mm, with 8 eyelets 50 mm on average, drawbar support with threaded spindle as height adjustment device, vehicle has no axle compensation! Fedpei Rixgefx Ag Aogc 24 volt, 2 connecting cables 7-pole interchangeable, large rectangular four-chamber lights incl. shunt lights and reversing lights, distribution box at the front, clearance lights at the rear, side marker reflector lights and holder for single-line license plate Underbody made of 40 mm thick pine wood, pressure-impregnated. Low loading platform and drive-on ramp with crossed top floor 30 mm thick, running lengthwise. Overall floor thickness 70 mm. Bogie platform with longitudinal single floor and recessed, open equipment box, size L 700 x W 800 x D 180 mm Ramps: in shit construction with trough plate, cross beams, wooden decking running lengthwise, 50 mm thick, ramp tip reinforced, ramp holding rods with turnbuckle and safety catch, ramps can be moved on both sides by 470 mm each, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with outer and inner springs for easy one-man operation, with automatic floor supports steel grit blasted, zinc phosphate primed, single color acrylic paint in RAL colors, wheels silver, traffic, light and metallic colors as well as two-tone paint, wood varnished

Condition: used, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 02/2021, next inspection (TÜV): 08/2026, loading space length: 4,800 mm, loading space width: 2,430 mm, loading space height: 500 mm, Equipment: ABS, Müller-Mitteltal low-loader tipper - Low-loader and two-way tipper combined in a single vehicle - 40 mm towing eye - Air brake system - Support legs for loading and unloading - Gigant axles - Tyres: 235/75 R 17.5 - Drum brakes - Unladen weight: 3,620 kg - Height-adjustable drawbar - TÜV due: 08.2026 - Safety inspection (SP) due: 02.2026 - Loading area length: 4,800 mm - Loading area width: 2,430 mm - Side wall height: 0.5 m Fgsdpfx Aoyk Rfkog Asc Errors and prior sale excepted. Internal vehicle number: 11349.

Condition: good (used), Year: 2014 Size max 360 x 310 mm min 140 x 100 mm Book block thickness max 60 mm min 3 mm Cover size max 642 mm min 203 mm Speed max 15.000 c/h Consisting of: Gathering machine Müller Martini 3697 Description: - air pump - blower - Chain tensioning station - Number of gathering stations: 12 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - 10 Stream feeders 3741 - 3 Bundle clamp: Müller Martini Bundle clamps - 1 Reject gate 3717 for incomplete products - 2x 3643 Intermediate element with vibrating - 1x 3642 Book Block feeder base - Transfer into the binder Perfect binder Müller Martini Corona C15 S/36 (18") Year: 2014 Description: - Book Data Center BDC - Semi automatic setting - Commander with touch screen - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: Robatech MOD - Stream cover feeder - Scoring station - Nipping and pressing station Fgsdpfx Agezbux Nj Asc - 2nd nipping and pressing station - Lay down device Transport system - Trasportbelts aprox 70 meters - Escape delivery Three knife trimmer Müller Martini 3675 Orbit Description: - Colour monitor with touchscreen - Semi automatic setting - Right hand infeed - Integratedcounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 17 Book stacker Müller Martini 3632 CB 18 Description: - Compensating stacker - Delivery to the left and right Pile tacking device Müller Martini 457 Option: - 2 Card gluer

Condition: good (used), Year of construction: 2008, Year of manufacture: 2008 Technical specifications: • Max. size: 330 x 250 mm • Min. size: 200 x 148 mm • Max. trimmed size: 330 x 250 mm • Max. trimmed size without lap: 340 x 260 mm • Booklet thickness: 4–6 mm • Mechanical speed: max. 22,000 cycles/hour Equipment: Feeding & gathering: - 2 bundle clamps - 6 stations gathering chain - 5 feeders 416 - 5 Stream feeders 3738 with extensions - 1 Semko - 3 ELTEX static control devices Stitching unit: - Type 410 - 2 stitching heads Trimming: - Three-knife trimmer 304 Controls: Signature reading system (ASIR) Option not included in the price - Extra feeders - Stream feeders - Card gluers 423 - Inserter Fsdpfxozbulvo Ag Asgc - stackers CONDITION OF THE MACHINE, cleaned, good working condition

Condition: used, empty load weight: 7,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 07/2006, loading space length: 9,100 mm, loading space width: 2,750 mm, suspension: air, tire size: 235/75 R17,5, color: grey, Equipment: ABS, Drum brake Payload 22,200 kg Rubber floor Hydraulic double ramps and hydraulic lateral shift Gigant axles Fjdpowh Rwvofx Ag Aogc Subject to errors and omissions.

Condition: used, Year of construction: 1991, pressure 60 t throat 280 mm stroke 10 - 90 mm ram adjustment 60 mm no. of strokes 110 Hub/min table surface area 740 x 550 mm clamping plate 740 x 555 mm ram surface 380 x 200 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3850 kg dimensions of the machine ca. B 1,1 x T 1,6 x H 2,3 m - fixed table - clamping plate - hydraulic clutch Ortlinghaus with additional brake - manual central lubrication Machine is partially overhauled in our company as follows: - disassembled, cleaned and completely technically inspected - new colour - shaft pulling, crack inspection, new seals - new control cabinet with touchscreen Fgjdpfx Agov Az T So Aec - new braeke plate - current press inspection

Condition: used, overall weight: 34,000 kg, first registration: 07/2010, - Low-bed trailer, galvanized - Ramps with mechanical suspension Fgsdpszbzbdjfx Ag Asc - Forced steering on the rear axle - 900 mm loading height - 8700 kg unladen weight - In top condition

Condition: used, maximum load weight: 10,950 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 04/2007, next inspection (TÜV): 04/2027, total width: 2,550 mm, total height: 1,500 mm, Equipment: ABS, * Air suspension ----* Tire size: 285/70R22.5 * Technically permissible total weight: 13,500 kg * Tare weight: 2,550 kg * Overall length: 6,600 mm * Next inspection due: 10/2026 Fsdpfx Agszb Avie Aogc ----Vehicle number: 12150----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of the rest. In addition, we can offer you the following services for an extra charge:----Trade-in of your old vehicle, TÜV/inspection acceptance, complete export processing, arranging financing, applying for export license plates, vehicle transportation, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) Fodpfxot N Anto Ag Aogc The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Condition: excellent (used), functionality: fully functional, Low-speed machine Cutting width – 150 mm Motor power – 2.2 kW Rotor speed – 200 rpm Number of rotor blades – 9 pieces Number of stator blades – 2 pieces Fgodpjyf I N Aofx Ag Asc 6 units available, in perfect condition Capacity up to 25 kg/h Price: 1200 EUR per unit

Condition: used, functionality: fully functional, empty load weight: 2,580 kg, Year of construction: 2004, load capacity: 8,000 kg, Heavy-duty trailer Condition: Ready for operation and fully functional Technical condition: Good Description: Tandem trailer – 2-axle trailer MÜLLER MITTELTAL ETS-TA-B 10.7 – payload 8,000 kg – unladen weight 2,580 kg – permissible total weight 10.7 tons – galvanized low-loader with sturdy (mechanical) access ramp, ramp length approx. 2m – lighting system 12V – internal loading area length 5.50 m – internal width 2 m – total length incl. drawbar 7 m – loading height 60 cm – side walls approx. 35 cm high – good tires Fgedpfxey N H D Io Ag Asc

Condition: excellent (used), Year of construction: 2009, operating hours: 19,000 h, Ref:11108 . 2009 Muller Martini ‘Acoro A5’ Perfect Binding Line Excellent condition line with only 19,000 hours worked! Comprising: 16 x 1571/21" top loading feeders + hand feed station ASAC thickness control ASIR III signature recognition & 3715 reject unit M.M. 3642 automatic book block feeder M.M. 'Commander' automatic make-ready Muller Martini 3026-20 ‘Acoro A5’ with 20 x Combi-clamps Measuring table for automatic make-ready ICS C80 & 30 EVA pre-melt tanks EVA spine gluing tank EVA Hot-melt side gluing tank Gauzing station Pile/rotary cover feeder 2 x nipping stations Lay-down delivery unit to; Two tier 180 degree flat conveyor system to; M.M. 3671 ‘Merit S’ three knife trimmer Including accessories, tools & manuals. Fgodpozaa Rbefx Ag Ajc N.B. Compressed air required – NOT included. Specification: A5/21” Binder book sizes, Max: 430 x 320 mm Min: 140 x 100 mm Book thickness, : 3 -- 60 mm Clamp opening, Max: 82 mm Open cover width, : 203 - 642 mm Mechanical speed, Max: 5,000 cycles/hr.

Condition: used, Year of construction: 1963, total height: 1,850 mm, total width: 800 mm, total length: 3,900 mm, Empty weight: 3.000 kg Price: On request Stroke: 1500mm Capacity: 10t - Year: 1963 - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 7.5 - Transport dimensions: 3900mm x 800mm x 1850mm (l x w x h) Fedpfxoy Auy Rj Ag Asgc - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, functionality: fully functional, usable tank capacity: 120 l, inner dimension width: 400 mm, inner dimension length: 930 mm, Müller Mechanik - Vibratory finishing technology MADE IN GERMANY - Our trough vibrators replace manual deburring and grinding processes. Avoid time-consuming and cost-intensive manual work in the future! With the trough vibrators from Müller Mechanik you achieve reproducible machining results of high quality. MMTV-9341 - Technical data : - Useful volume : 120 dm3 - Trough inner dimensions: 930 x 410 x 510 mm Fjdpfx Agefid Tcs Ajgc - Wear coating: Polyurethane, 18 - 20 mm - Maximum payload: 400 kg - Empty weight: approx. 490 kg - Operating voltage: 3N ~ 50 Hz 400 / 230 V - Connected load: 1,5 KW - Nominal motor speed: 1,500 min-1 - Speed control infinitely variable via frequency converter

Condition: new, Year of construction: 2026, functionality: fully functional, usable tank capacity: 20 l, inner dimension width: 200 mm, inner dimension length: 520 mm, Müller Mechanics - Vibratory finishing technology MADE IN GERMANY - Our trough vibrators replace manual deburring and grinding processes. Avoid time-consuming and cost-intensive manual work in the future! With the trough vibrators from Müller Mechanik you achieve reproducible machining results of high quality. MMTV-5321 - Technical data : - useful volume 20 dm³ - max. payload 80Kg - Engine speed 1500 min-1 - Polyurethane wear coating, seamlessly cast, wall thickness 10-12mm - Operating voltage 3N ~ 50Hz 400/230V, connected load 0.25KW - Empty weight approx. 68 Kg - Process control, switching range 1min - 99h 59min Fodpfxofid Sqs Ag Aogc - Dosing pump control, switching output 230 V ~ 50Hz max. 2A

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Fjdoudph Iepfx Ag Aogc

Condition: excellent (used), For sale: a robust, double-station bookbinding/printing press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. This machine was previously operated by the public sector unit Stadt Fürth (Germany), which ensures it is complete and well-maintained. The device is equipped with two independent workstations, a heavy-duty upper beam, and pressure adjustment via lever arms. The lower housing contains the mechanical and electrical systems; power is supplied through a 16A CEE connector (400V). The machine is mounted on wheels for easy mobility. Fsdjxzu Rqepfx Ag Asgc Application This press is suitable for bookbinding, printing, modeling, technical works, and any applications requiring even pressure over a larger area. Ideal for book blocks, covers, laminates, paper and cardboard elements, and other materials that require pressing or stabilization under pressure. Technical condition – Complete unit – All levers and mechanisms function correctly – 400V power supply, CEE 16A plug – Mobile design on wheels – Normal signs of use visible in photos – Machine is ready for operation Manufacturer: Karl Tränklein K.G. Country of manufacture: Germany (Made in Germany)

Year of construction: 2000, condition: good (used), 6 Station: 3 Automatic Feeders (3 x double feeders 1551) 1 Cover Folder Feeder 1 Three Knife Trimmer Müller Martini Typ 1522 Stitching Unit Typ 1550 Belt Delivery 6 x Station: 3 Automatic Feeders (3 x double feeders 1551) 1 x Cover Feeder Typ 1528 1 x Three Knife Trimmer Müller Martini Typ 1522 Stitching Unit Typ 1550 1 x Müller Martini Pratico Stacker Fodpfefh It Uox Ag Aogc 2 x Handfeeder Speed : 9.000 Cycles / Hour Largest Sheet Size X : 365 mm Largest Sheet Size Y : 305 mm Min. Sheet Size X : 115 mm Min. Sheet Size Y : 105 mm

Condition: good (used), Manufacturer: MÜLLER MARTINI, year of manufacture: 1994, serial number: 94.00398.01 Fodpfx Agsy Ez Ums Aogc

Condition: good (used), Karl Krause Large Bookbinding Press with Tapping Block The machine is fully operational and ready for operation. Manufactured by Karl Krause, Germany. The press has a tapping block that increases the pressing force. Pressure: 5 tons Plate dimensions: 550 x 490 mm Fsdsy Hglyopfx Ag Ajgc