Used Knikmops 100 for sale (23,716)

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Iaodpozdc Nzjfx Anvsu Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: new, Year of construction: 2025, Electro-hydraulic press OMCN 100 Ton Mod. 164/R Made in Italy DOUBLE SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH MANOMETER Iajdsfh R Nyjpfx Anvsu Hydraulic press with rapid motor with pressure gauge and double hydraulic power pack speed obtained with vane pump for fast approach and return and with axial piston pump for the working phase. Equipped with calibration and three-position control valve (neutral return). The machine is complete with oil. Equipped with winch for lifting the worktop. The stem is made of special steel, treated and chromed. The machine is equipped with bimanual control and simultaneity as from regulations in force. Complete with protective panels, rear and side panels. CE approval complete with electromagnetic compatibility. Piston stroke : mm 310 Interior light : mm 1,010

Condition: excellent (used), Here we offer you a chamber dryer. External dimensions approx.: Width: 1,885 mm Depth: 1,200 mm Height: 2,425 mm Internal dimensions approx.: Width: 1,030 mm Depth: 1,000 mm Height: 2,100 mm Internal volume: 2.2 m³ Rated temperature: 100 °C Iajdpfjzdzixsx Anveu Operating temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating power: 20 kW Air circulation rate: 4,500 m³/h / 400 Pa Motor power: 1.1 kW Protection class: IP 54 The chamber heating oven must not be used for flammable or explosive materials. The chamber heating oven must not be installed in an explosion-proof area. Continuous chain conveying system External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm Carrier bars: 13 pieces Pitch: 228 mm Carrier bar width: 354 mm Carrier bar depth: 320 mm Usable height: 135 mm Drive motor power: 0.25 kW at 189 Nm Transport speed: average 5 m/min. Load capacity/carrier bar: max. 10 kg Total load capacity: max. 130 kg Total weight when loaded: max. 730 kg Year of manufacture: 2005 Type: Ke/SO Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), IPG Ytterbium Fiber Laser with Controller Here we offer an IPG Ytterbium Fiber Laser with controller. IPG Ytterbium Fiber Laser Ijdpfx Anszdyyvevoau Type: YLP-C-1-100-20-20 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating pressure: 50 bar, high-pressure hose length: 1,500 mm, empty load weight: 100 kg, input voltage: 230 V, water tank capacity: 100 l, warranty duration: 12 months, We offer for sale a Pressure Washer combined with a vacuum cleaner AP 100/50M. The machine allows for the removal of residual water left on surfaces after pressure cleaning, which enables use even on floors without a drain. It is recommended for cleaning bathrooms and washrooms that need to be accessible immediately after cleaning. The AP 100/50 M is ideal for hotels and SPA centers, public facilities (stations, airports), industrial baths, restaurant kitchens, sports facilities, and many more. This is an essential machine for cleaning companies managing such premises. Condition of the machine – Very good Year of manufacture: 2014 All machines purchased from us come with a 12-month WARRANTY. Iajdpfx Ajwz Nmpsnvju Technical specification: Clean water tank: 100 l Dirty water tank: 70 l Maximum pressure: 50 bar Pump performance: 5 l/min Turbine power: 1800 W Pump power: 370 W Voltage: 230 V Weight: 100 kg

Condition: used, maximum load weight: 630 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 03/2025, loading space length: 2,070 mm, loading space width: 1,145 mm, loading space height: 330 mm, total width: 1,495 mm, total height: 870 mm, A62 GW26RGA30254, type FT 7.5-20-10.1, open platform, WSE01AKC7, gross weight 750kg, 100km/h, jockey wheel installed ...and much more. Vehicle not refurbished. Subject to errors and prior sale. Ijdpfx Aoyqdrksnvjau

Condition: used, maximum load weight: 2,549 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,750 mm, loading space height: 345 mm, total width: 2,010 mm, total height: 680 mm, A40 NG000588, Three-way tipper trailer with tandem axle, manufacturer STEMA, model TRIUS SHDK .2 Zink-BW, gross weight: 3,500 kg, high-loader, hydraulically tiltable with electric pump, rear pendulum tailgate, 3.01 m x 1.83 m. Iaodjyn Uhkepfx Anveu 3,500 kg, overrun braked, high-loader, electric pump, aluminum paneling, rear pendulum side panel. Errors and prior sale excepted, vehicle not prepared.

Condition: used, maximum load weight: 600 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 04/2025, loading space length: 2,500 mm, loading space width: 1,260 mm, loading space height: 300 mm, total width: 1,710 mm, total height: 790 mm, The box trailer consists of a sturdy aluminium construction with a wear-resistant wooden floor. Iajdoy A A Snjpfx Anvju Errors and prior sale excepted.

Condition: used, maximum load weight: 2,184 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 3,070 mm, loading space width: 1,830 mm, total width: 2,320 mm, total height: 980 mm, Low-loader tandem axle trailer, manufacturer STEMA, type SySTEMA ST .2, gross weight: 2,700 kg, overrun braked, 100 km/h permissible speed... and much more. Subject to errors and prior sale. Iaedpfxoym Ihbo Anvsu

Condition: used, maximum load weight: 2,094 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 1,960 mm, total height: 1,020 mm, A12 GW26NG000301 High-bed tandem trailer, manufacturer STEMA, type SySTEMA SH .2, gross weight: 2,700 kg, High-loader with low frame, 4.01 m x 1.83 m, 10" tyres, 100 km/h approval Loading height: 600 mm Subject to errors and prior sale. Iaedpfx Aoym Igwjnvju

Condition: used, maximum load weight: 1,007 kg, overall weight: 1,500 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,870 mm, loading space height: 100 mm, total width: 1,960 mm, total height: 925 mm, A66 GW26NG000373 100 km/h type approval Iasdpfx Aeyq U Enenvou Platform trailer Support wheel Loading ramps Errors and prior sale reserved

Condition: used, maximum load weight: 911 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 3,070 mm, loading space width: 1,530 mm, loading space height: 350 mm, total width: 1,660 mm, total height: 1,000 mm, A9 GA00084, Isdpfx Aneym If Hevoau Flatbed trailer, type SySTEMA SH .1, WSESHPF3XRGA00084, with overrun brake, open box body, 3.01 m x 1.53 m, 13" tyres, 100 km/h Loading height: 600 mm Errors and prior sale excepted.

Condition: used, maximum load weight: 1,979 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,530 mm, loading space height: 350 mm, total width: 1,660 mm, total height: 660 mm, A39 GW26GA00010, Rear tipper by STEMA, model ROCKO II SHRK .2, Ijdjyn Ucuopfx Anvoau Gross weight: 2,700 kg, year of manufacture: 2022, overrun braked, high loader, rear tipper with aluminium side panels, hydraulically tiltable, with rear pendulum tailgate. Errors and prior sale excepted.

Condition: good (used), Year of construction: 2009, ENGEL Emotion 440/100T Iasdpfx Ansyktp Sevju Clamping force: 1000 kN Opening stroke: 400 mm Ejector stroke: 130 mm Ejector force: 37 kN Screw diameter: 40 mm Max. swept volume: 220 cm³ Screw speed max: 420 rpm Injection rate: 224 cm³/s Specific injection pressure: 2200 bar Nozzle stroke: 305 mm Nozzle contact force: 40 kN

Condition: used, Technical specifications: Filter bag diameter: 1 x 1000 mm Collection bag diameter: 1 x 1000 mm Iaedpfezd Ef Dox Anvsu Extraction nozzle: 200 mm Power supply: 400 V Motor speed: 2900 rpm Motor power: 3 kW Overall dimensions: Length: 1700 mm Width: 1100 mm Height: 2400 mm

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Iaodpjzdn H Rjfx Anvou Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Type: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: Water-cooled Description Used temperature shock test chamber from CTS. Suitable for shock and cycle temperature tests. Application in industry, research, and quality assurance. Application Areas Iodpfx Anoy H Hk Aeveau Material testing Aging tests Electronics and component tests Temperature shock tests Automotive and quality control Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment Touchscreen control Microprocessor control Program operation Setpoint/actual value display (digital) 2-zone system Mobile frame for quick changeover Viewing window Integrated control cabinet Cooling water connections Technical Design Separate hot and cold chambers Stainless steel test chamber Industrial design Dimensions Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation Declaration of Conformity Test certificates Operating manual Wiring diagram and piping diagram Spare parts list Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Optical condition, see pictures. Scope of Delivery Test chamber TSS-70/350-A Documentation (if available) Inspection possible by arrangement. Loading and transport can be arranged on request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Year of construction: 2026, condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, The Wattsan 100W is a brand-new portable laser metal cleaning machine. This model has 1 mirror and 1 seam type. Due to its air cooling system, the machine is quite small in size. It’s quiet, fast and easy to use. It is ideal for removing rust, paint, petrochemicals, oxide layers, welding scales, carbon deposits, etc. from metal items. This portable machine can also clean adhesive and galvanised materials as well as plaster and stone products. Thanks to pulse cleaning, this machine can clean thick layers of rust, paint, petroleum products, oxide films, scale and carbon deposits from metals without heating or damaging it. You can give our managers a call for additional details! Wattsan Cleaning 100 W machine characteristics: Cooling: Air Laser power: 100 W Machine size: 750x600x680 mm Iajdpfx Asr Hbwkonvju Laser source: JPT Weight: 46 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Plasma cutting unit HYPERTHERM, Type Max 100 Plasma cutter with machine torch Machine No. 70-2513, Year of manufacture 1990 Power: 100 Amps = 80% duty cycle Iaodpfx Aoyah Saenveu 89 Amps = 100% duty cycle Cutting capacity: up to 32 mm material thickness Adjustment range: stepless Hose package length: 22 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 63 Amps plug - Hose package with machine torch (hand torch without switch) - Spare nozzles for the plasma cutting torch - Separate push button switch for starting the plasma cutter Space requirement L x W x H: 850 x 700 x 1100 mm Weight: 225 kg Good condition Ideal for retrofitting to an oxy-fuel cutting machine.

Condition: used, functionality: fully functional, Year of construction: 1989, For sale: TRUMPF MINIMATIC 100 punching machine. Lightly used, in excellent condition, and comes with many tools. The machine is connected and can be tested. We can provide training on how to use the machine; all instructions are available. Iaedpfx Anoy Udrmovsu Specifications: Make: TRUMPF MINIMATIC 100 Made in: Germany Year: 1989 Capacity: 15 T / 150 kN Other: Automatic 9-tool changer Weight: 5T If you have any further questions, please do not hesitate to ask.

Condition: used, Year of construction: 1980, Used machine Iajdpfx Anjyq T Ibjvsu Year of manufacture: 1980 Features and technical data: - Lock case milling unit - Handle hole borer - Face plate milling cutter - 1.5 kW motor - 2800 rpm Availability: short-term Location: 63934 Röllbach

Condition: good (used), Year of construction: 1997, USED, IN GOOD CONDITION. Iajdezdiqlepfx Anvou

Condition: good (used), Steady rest universal swing Ø 100 Iedpfx Anjzdirdjvjau Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 160 mm Length of the planing table 1050 mm Feed motor 7 kW Feed speed 6-40 m/min. control MemoryPlus Weinig Powermat 1200 ----- with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely overhauled at our warehouse before delivery ! Detailed description: ----- 1. Weinig planer and moulder Powermat 1200 ----- Technical data: ----- Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----- First lower horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 125 - 180 mm In conjunction with PowerLock 93 - 180 mm Tool flight circle rebate cutter 130-160 mm Axially adjustable range 17 mm Folding device MarathonCoating in front of 1st lower tool holder 2nd spindle ----- First right vertical spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Maximum throat depth 35 mm Axial adjustment range 80 mm Radial adjustment range Min. tool diameter on stop plane 93 mm Max. tool diameter behind stop plane 200 mm 3rd spindle ----- First left vertical spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 80 mm Pressure shoe in front of left tool holder, including 2 side pressure rollers, spring-loaded Iajdpfxjvnwbce Anvsu 4th spindle ----- First upper horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 40 mm Split pressure shoe in front of upper tool holder on tool flight circle adjustable and swinging away from the tool, spring-loaded. Upper spindle prepared for later installation of the cassette system 5th spindle ----- Second upper horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 40 mm Split pressure shoe in front of upper tool holder on tool flight circle adjustable and swinging away from the tool, spring-loaded. Upper spindle prepared for later installation of the cassette system 6th spindle ----- Second lower horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 225 mm Maximum throat depth 15 mm Axially adjustable travel 40 mm Radial adjustable travel Min. tool diameter to table level 93 mm Max. tool diameter 6 mm below table level 225 mm All spindles with high concentricity. Lubrication points for the axial tool holder movement. Feed system ----- Electronic feed, infin...

Condition: used, Year of construction: 2010, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Heidenhain iTNC 530 tool taper SK 50 number of tool places 120 Pos. On-time hours ca. 66737 h spindle hours ca. 36316 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Fully protective cabin with sliding doors and interior lighting Iajdpfx Anezcq Dqjvju - Setup room - Tool measurement in the work area with BLUM laser - 3D measuring probe - Operating modes 3 bar internal coolant supply with 600 l tank and paper belt filter - Chip flushing gun with 1 bar/ l pump - Chip conveyor - Brankamp monitoring system - 3-color signal light - Coolant ring nozzle - Blow-air cooling system - Coolant system - Oil/emulsion mist separation system - Control cabinet cooling unit - Operating manuals Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!