Used Komori 2004 for sale (1,052)

Condition: good (used), Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 51,900 mm Number of bays / row of shelves: 14 units of 3,600 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Dodpfx Apetpg Eco Djku Pallet spaces per bay: 12 pcs. Pallet spaces per row: 168 pcs. Total pallet spaces: 168 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 800 kg The scope of delivery includes: 15x pallet rack uprights, used Material color: grey Frame profile: PLFB155 Profile dimensions: P 100 x 68 x 2.25 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled ( bolted framework ) 2,000 mm high 1,100 mm deep 84x pallet rack traverse, used Material color: RAL 2004 orange Box profile: 145 x 50 x 1.75 mm Beam type: PNB0445 Bracket: 4 HK (hooks) Clear width: 3,600 mm Max. load per pair of beams 3,200 kg with evenly distributed load 168x locking pin, used Version: completely galvanized For securing the longitudinal beams against unintentional lifting out 60x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 30x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Feralco Type: NS Technical Data for Installation: Number of racking runs: 01 pcs. Length per racking run: 22,455 mm Number of bays per run: 08 pcs. Number of levels plus floor level: 02 pcs. Scope of delivery includes: 09x pallet rack frames, used Material finish: Sendzimir galvanized Type: 20 M Profile dimensions: 95 x 60 x 2 mm Incl. horizontal and diagonal braces, base plates Frames are pre-assembled (bolted truss) 2,550 mm high 1,250 mm deep 32x pallet rack beams, used Material finish: RAL 2004 orange Box profile: 80 x 50 mm Dkedpfx Asyknl Isp Dou Beam type: 80 E15 Connector: 3 HK (hooks) Clear span: 2,700 mm Max. load per beam pair: 1,500 kg, with evenly distributed load 64x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 36x wedge anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Execution: Carbon steel, galvanized Approved for: cracked concrete 18x shim plates, used Finish: completely galvanized For leveling the rack frames installed on uneven floors 01x load sign Indicating bay and compartment loads, manufacturer, and job number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transport or shipping beyond this must be arranged separately and will incur additional costs, which can be requested from us depending on the delivery location and order volume.

Condition: used, Year of construction: 1986, Overview  This isobaric glass bottle filler was manufactured in 1986–87 by German company Krones and commissioned in 1988. It is a Krones Mecafill VK2V K126-308 with 96 filling valves and 18 capper heads for crown cork closures. The filler has been continuously upgraded with new technology, including a Siemens S7-300 control system (2009) and a retrofitted Krones capper (2004). It is suitable for beer, cider, soft drinks, cocktails, lemonade, carbonated and still water. The machine is still in production (can be seen on the video) and will be dismantled by the end of September 2025. Spare parts from the warehouse are included. Technical data  - Capacity: 30,000 bph (all formats) - Formats: 0.275 L, 0.33 L, 0.5 L (total 9 formats) - Filling valves: 96 - Capping heads: 18 - Closure type: Crown cork - Direction: Clockwise (L–R) - Diameter: 2,880 mm - Filling system: Isobaric, with double evacuation, HDE (hot water injection), and splinter washout - Products: Beer, alcohol-free beer, cider, cocktails, lemonade, soft drinks, carbonated water, still water - Control system: Siemens S7-300 PLC (2009 retrofit) Dkedpfxjxc H Tgs Ap Dju Scope of Delivery  - Filler and capper | Krones | Mecafill VK2V K126-308 | 1986–87 (commissioned 1988) | 96 filling valves, 18 capper heads, crown cork closures, clockwise, diameter 2,880 mm, crown cork transport system - Control system | Siemens | S7-300 | 2009 | PLC retrofit - Safety fences - Spare parts  

Year of construction: 2004, condition: refurbished (used), REISER GB 200 ID.NO. 2086 Reiser mod GB 200 minced meat portioner with paper dispenser. Previously been connected to a Vemag vacuum sprayer with grinder attachment. Year against 2004. Dimensions W 145 D 45 H 140 cm. Dksdpfxog R H S Hs Ap Deu

Condition: excellent (used), Year of construction: 2004, CNC MACHINING CENTER Kunzmann BA 1200 Year of manufacture 2004 Heidenhain TNC 530 Technical specifications: X-1200 Dsdpfx Aowm Dkyop Djku Y-700 Z-750 Spindle max. 8000 rpm

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 1,500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.35 mm, number of axes: 4, wire diameter (min.): 0.1 mm, This 4-axis ONA KE500 wire EDM machine was manufactured in 2004. It features a maximum workpiece weight capacity of 5000 kg and a Z-axis travel of 400 mm. The machine offers impressive X-Y travel dimensions of 700 x 500 mm and U-V travel of 460 x 460 mm. If you are looking to get high-quality wire EDM capabilities, consider the ONA KE500 machine we have for sale. Contact us for further details. • Models covered: KE 350, KE 450, KE 500, KE 1000 • X–Y travel: • KE 350: 550 x 350 mm • KE 450 & KE 500: 700 x 500 mm • KE 1000: 1500 x 1000 mm • Z-axis travel: • KE 350, KE 450, KE 500: 400 mm • KE 1000: 600 mm Dkjdpfxezx Uxve Ap Deu • U–V travel: • KE 350 & KE 450: 140 x 140 mm • KE 500: 460 x 460 mm • KE 1000: 500 x 500 mm • Max. workpiece dimensions (X x Y x Z): • KE 350: 1050 x 800 x 400 mm • KE 450: 1200 x 950 x 400 mm • KE 500: 1500 x 1200 x 400 mm • KE 1000: 2300 x 1600 x 600 mm • Max. workpiece weight: • KE 350: 3000 kg • KE 450 & KE 500: 5000 kg • KE 1000: 10000 kg • Taper angle (Z): • KE 350 & KE 450: ±9° / 400 mm • KE 500: ±28° / 400 mm • KE 1000: ±20° / 600 mm • Max. taper angle: • KE 350 & KE 450: ±30° / 95 • KE 500: ±30° / 375 mm • KE 1000: ±30° / 400 mm • Wire spool type: DIN 100, DIN 125, DIN 160, DIN 200, DIN 355 • Guide type: High-precision zero-backlash closed diamond guide • Position resolution (X, Y, U, V): 0.001 mm • Minimum programmable increment: 0.001 mm

Condition: new, Technical data for the pallet racking beam: Racking system: Stow Type: Pal Rack NS Included in the scope of delivery: 01x Pallet racking beam, new (2nd choice) Material color: RAL 2004 orange Box profile: 150 x 50 mm Beam type: PNB 0415|1.5 Agraffe: 4 HK (hooks) Clear span: approx. 3,600 mm Max. load per beam pair: 2,186 kg with evenly distributed load 02x Locking pins, new Design: fully galvanized For securing the uprights against unintentional lifting Note: This is new goods, but we sell it as 2nd choice. The reason is that the beams have storage marks, i.e. dust deposits, and scratches may be present. General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery. Dksdpfx Aszvp D Ijp Dju

Condition: ready for operation (used), Year of construction: 1994, operating hours: 37,780 h, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 500 mm, controller manufacturer: HURCO, controller model: Ultimax 3, table width: 450 mm, table length: 1,000 mm, table load: 500 kg, overall weight: 4,600 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco BMC30AP was manufactured in 1994. It features X, Y, and Z travels of 760 mm, 460 mm, and 500 mm, respectively, with a robust table size of 1000 x 450 mm and a maximum table load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco BMC30AP vertical machining centre we have for sale. Contact us for further details. - Display: TFT- Spindle Speed Range: 30 - 6,000 RPM- Gear / Speed Adjustment: Two-stage gearbox; infinitely variable per range- Tool Changer Type: Umbrella type, automatic- Coolant Supply: Flood cooling- Chip Conveyor: Available- DXF Option: Available on control and floppy disk- Computer Connection: 9-pin; RS-232 (Port 1)- Installed Software Version / Hardware: Ultimax 3 V1.53- Operating Voltages: 440 / 415 / 380 / 220 V, 3-phase- Mains Frequency / Apparent Power: 50-60 Hz / 20 kVA- Rapid Traverse Rate: 15 m/min- Compressed Air Requirement / Operating Pressure: 6 bar- Included Documentation:- Parts Listings & Wiring Diagrams - BMC 30 (1991, English)- Machine Operation and Maintenance (11/1993 Rev. B, English)- Options Manual Ultimax 4 (2004 Rev. A, German)- 2x BMC Operator Manual: BMC 30 with Ultimax 3 (06/1995 Rev. C, German)- Included Software & Backup Floppy Disks:- Optikey Utility Disk - Security Modifier Mill V1.52-V1.59- Optikey Utility Disk - Software Option DXF- Ultimax 3 Version 1.53 - Disk 1 and Disk 2- Ultimax 3 Machine Configuration- Backup Machine Config- Condition & Repair Notes: Machine needs to be rebooted via floppy disks because the buffer battery was depleted. One circuit board was repaired by the machine lab (new capacitors and a new Intel processor installed). Technical Specification Dedpfx Aezylx Asp Dsku Taper Size ISO 40

Year of construction: 2004, condition: excellent (used), REEPACK REEFAST 100 ID.NO. 1866 Dkedpfx Apjf Ddbns Dju Trough sealer Reepack mod Reefast 100 years mod 2004 associated gas mixer. Closes 3x troughs at the same time automatically. Dimensions trough 190 x 140 mm

Condition: excellent (used), Year of construction: 2004, For sale is a functional and very well-maintained gas burner from the Weishaupt brand, including gas piping (Dungs DN 80). Dkjdpfswg Hg Rex Ap Deu 1. Gas burner WEISHAUPT G11/1-D - 4750 kW, with control unit and gas piping. Output: 900-4750 kW Design: ZMD Year of manufacture: 2004

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1600058, total height: 300 mm, total width: 670 mm, total length: 890 mm, rotary table diameter: 600 mm, table diameter: 600 mm, compressed air connection: 8 bar, Haas HRT600 CNC rotary table / 4th axis / Ø 600 mm Haas HRT600 CNC rotary table (4th axis) for sale. Djdpozzbitsfx Ap Doku This rotary table comes from a Haas VF-6B/40HE and was used as a 4th axis. The table is equipped with a servo drive and was tested on the machine again before removal. The axis could be moved and rotated flawlessly via the control. The rotary table has a diameter of approximately 600 mm. Serial number of the rotary table: 1600058. Condition Rotary table rotates and moves via the Haas control. Functionality tested before removal. No detailed geometric measurement performed. Angular accuracy, runout, and repeatability were not checked with a dial indicator. Sale due to non-use. Technical data Manufacturer: Haas Automation Model: HRT600 Type: CNC rotary table / 4th axis Table diameter: 600 mm Serial number: 1600058 Year of manufacture probably 2004/2005 (matching the original machine)

Condition: ready for operation (used), Year of construction: 2004, Double sided edgebander manufactured in 2004. This HOMAG OPTIMAT KFR 526/10/A3/35 features a robust design suitable for various applications. It operates at a voltage of 400 V and has a load capacity of 250 A. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG OPTIMAT KFR 526/10/A3/35 machine we have for sale. Contact us for further details. Dksdpfez Ah Ixsx Ap Deu - Voltage: 400 V- Frequency: 50 Hz- Phase: 3~+N- Control Voltage: 24 V- Nominal Current: 190 A - Main Fuse: 250 A

Condition: used, Year of construction: 2001, Thermo-lamination system Manufacturer: BÜRKLE Type: FFAII 1300 Year of manufacture: 2001 Technical data: Working width: 1300 mm Dsdpfx Apozuzt Sj Djku Panel dimensions Width: 200 - 1300 mm Length: 400 - 3000 mm Thickness: 8 - 40 +/- 0.2 mm Film dimensions Width max. 1320 mm (lateral overhang up to 20 mm) Roll diameter 76 or 152 mm (3" or 6") Working height above floor: 940 mm System speed: 15 - 45 m/min Three-phase drive with vector control Operating side: right Panel feed: centered System configuration FFAII 1300 - Brush machine DBM (chain brushes) - Preheating and smoothing calender GKL, D = 500 mm - Thermo-oiler heater 36 kW - Hardener application machine DAH + complete hardener circulation system with monitoring - Transport section + IR zones with temperature sensors - Adhesive application machine DAK + automatic level sensing - Cooling unit for DOW cooling - Adhesive supply - Conical transport section TKE - Lamination calender EKM, D = 500 mm + film unwinding station + separating station + belt transport section with operator platform for FVE - Expansion shafts - Smoothing calender GKL, D = 500 mm at the inlet of the conveyor belt - Thermo-oiler heater 96 kW for lamination calender and smoothing calender - Central control cabinet - I.S.E. Optimat ISL 111 (year of manufacture 2004) Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2004, lifting height: 8,000 mm, total length: 5,080 mm, Gas forklift Djdpfx Apoxd E Tbj Dsku Hyster S5.50 XMS Drive Gas Year built 2004 Lifting height (mm) 8,000

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 670 mm, turning diameter: 490 mm, overall weight: 6,500 kg, FOR SALE: High-Quality CNC Lathe Biglia B 658 MB (Year of Manufacture 2004) with Driven Tools + KID 70 Bar Feeder Dkjdszbx N Eopfx Ap Dou Are you looking for a reliable and robust workhorse for metalworking? For sale is a Biglia B 658 MB CNC lathe in good and fully functional condition. The machine is equipped with driven tools, an automatic tailstock, a reliable Fanuc control, and includes an automatic bar feeder. The complete package is available ex stock. General Information Manufacturer: Biglia (Italy) Model: B 658 MB Year of manufacture: 2004 CNC control: FANUC Series 18i-TB Condition: Good, fully functional Availability: Ex stock --- Key Technical Characteristics (Lathe) Maximum turning diameter: 380 mm Maximum turning length: 650 mm Maximum rod/bar diameter: 80 mm Maximum passage: 620 mm Spindle speed range: 30–3000 rpm Spindle drive power: 26/22 kW Spindle end: ASA 8″ Spindle bore diameter: 90 mm Diameter of the lathe chuck: 315 mm Bidirectional turret: 12 positions Turret indexing time (per position): 0.1 s Driven tool stations: 12 positions Max. speed of driven tool stations: 4000 rpm Max. torque of driven tool stations: 3.7 kW Feed in the X/Z/B axis: 220 / 650 / 660 mm Rapid traverse in the X/Z/B axis: 20 / 24 / 12 m/min Automatic tailstock maximum clamping force: 1080 Kg --- Round bar diameter: min. 5 mm (3/16") – max. 70 mm (2" 3/4) Square bar side: min. 5 mm (3/16") – max. 50 mm (2") Hexagonal bar height: min. 5 mm (3/16") – max. 60 mm (2 1/4") Maximum bar length options: 500 mm / 1615 mm Magazine capacity: 250 kg (e.g., approx. 60 bars of 10 mm) Bar change time: 50 sec (with a 1000 mm bar) Feed speed: 0–500 mm/sec Return speed: 1000 mm/sec Supply voltage: 230/400 Volt Control voltage: 24 Volt Installed power: 2 kW Weight: 580 kg Additional Equipment & Features KID 70 Bar feeder Measuring arm (Touch setter) Chip conveyor Collet chuck DIN 6343 Coolant tank capacity: 250 liters Coolant pump capacity: 150 l/min Coolant pump power: 0.73 kW Noise level: 74 dB(A) Physical Dimensions (Lathe) Dimensions (L x W x H): 4000 x 1900 x 1850 mm Weight of the Biglia B658/BM: approx. 6,000 kg Contact us today to request a quote for this complete production package! The machines are ready for immediate dispatch. > *(All information is given in good faith but we reserve the right to make errors)*

Condition: good (used), Year of construction: 2004, operating hours: 76,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, displacement volume: 1,047 cm³, plate length: 1,200 mm, plate height: 1,270 mm, total length: 9,830 mm, total width: 2,330 mm, total height: 2,480 mm, overall weight: 23,090 kg, KRAUSS MAFFEI KM 420-1900/55 CZ Multinject Stock No.: 503534 Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 55 CZ Control System: MC 4 Year of Manufacture: 2004 Operating Hours: 76,000 h Technical Data – Clamping Unit Clamping Force: 4200 kN Tie Bar Spacing h x v: 800 x 800 mm Platen Size h x v: 1270 x 1200 mm Minimum Mold Height: 380 mm Maximum Mold Height: 1400 mm Opening Stroke: 1020 mm Ejector Stroke: 250 mm Ejector Force: 95 kN Centering of Moving Platen D: 200 mm Centering of Fixed Platen D: 200 mm Tool Weight: 6700 kg Technical Data – Injection Unit Screw Diameter: 70 mm Dodpfoz Dgc Isx Ap Dsku Injection Volume: 1047 ccm Injection Pressure: 1778 bar Screw Length: 20 l/d Screw Speed: 527 rpm Plasticizing Rate: 95 g/s PS Free Injection Rate: 953 g/s PS Number of Heating Zones: 6 Dimensions & Weight Machine Dimensions L x W x H: 9.83 m x 2.33 m x 2.48 m Total Weight: 23090 kg Equipment Screen Text in German Hydraulic Core Pull 6x Machine without Handling System Machine without Material Hopper Leveling Elements Tool Heating 16x Two-Component Injection Molding Machine

Condition: used, Year of construction: 2004, Manufacturer: Pyrazol year of manufacture: 2004 operating temperature +10- +50 C Dsdpfouf Rxdsx Ap Dsku total diameter: 1500mm height: 21000mm connection: 4x 200mm flanged 2x 3.4 inch + cleaning opening weight: empty 500 kg

Condition: excellent (used), functionality: fully functional, power: 41.92 kW (57.00 HP), first registration: 10/2021, fuel type: diesel, color: orange, fuel: diesel, operating hours: 562 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, trailer coupling, HOLDER C 55 SC - Low-emission diesel engine, - Engine compliant with emission stage 5 / Tier 4 final - 4 cylinders - Power output 42 kW (57 hp) - Single-operator comfort cab with heating - Air conditioning - Tires: turf tires + winter tires + fenders, upon request - SDS driving comfort - Driver's seat with air suspension, backrest extension and lap belt - Wheelbase 1,820 mm instead of 1,700 mm as in C270, resulting in a vehicle 120 mm longer - 2 additional work lights at the front - Hydraulic Set 2 (3 double-acting control valves, 2 with floating position, 6 front quick-release couplings 2 rear quick-release couplings, connected via a T-piece with a front quick-release coupling, active hydraulic tilt adjustment, 1 multi-function joystick for 5 double-acting functions, including direction switch and speed control) - Hydraulic Set Flow Divider 1 (Flow divider for circuit 1, adjustable from 0-35 l/min with hose set to the front and rear, return line at the front and rear) - Hydraulic tilting system for superstructure frame - Heated exterior mirrors - Central lubrication system - Reinforced axle load distribution - LED rotating beacon Dodpjzd D R Esfx Ap Dsku - Front linkage, category 1, with hydraulic tilt adjustment - Hydraulic tilting system for cab - Locking bar - Hydraulic implement adjustment pump with 0-80 l/min - Mechanical front PTO shaft, 1,000 rpm - Work lights at the rear - Electrical socket, 7-pin, at the front - Electro-hydraulic implement relief - High roof - Color: Holder Orange RAL 2004 - Hydraulic oil level warning system - Reinforced axle load distribution The Kugelmann salt spreader and the front sweeper are not included in the offer and can be purchased separately if required. Subject to changes, typographical errors, and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: NOH388/45, 1 Vetter / Demag wall-mounted swivel crane, 250 kg payload / lifting capacity Type AW2.5-7.0 Reach approx. 7m, 250 kg / 0.25 t payload with Demag DC chain hoist, 250 kg payload (2 lifting speeds) Crane available in quantity 2!!! Total weight approx. 450 kg Year of manufacture 2004, with inspection certificate Complete with wall brackets, jib, chain hoist, cable carrier, undercarriage and small parts Swivel range approx. 180° Item location: 75053 Gondelsheim Dkedpjxmd Rdofx Ap Dju System is completely disassembled and immediately available See pictures Shipping by freight forwarder or collection Please inquire about shipping costs based on your postal code.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, - Year of manufacture: 2003, commissioning: 2004 - Working dimensions: 4000x1600x200mm - Main spindle: 7.5kW - C-axis - Gluing unit - Drills: 12x vertical Dkodsza Uryjpfx Ap Deu - LED display of the vacuum pump position - Tool magazine: 12 slots

Condition: used, Single-girder bridge crane with hoist, DEMAG - KONECRANES, type CTX40410050P35FBL05 Crane bridge, manufacturer's number 281322/5, year of manufacture 2004 Load capacity: 5 tons Span, track gauge (center of wheel to center of wheel): 4650 mm Wheel diameter: approx. 140 mm Wheel flange width: 60 mm for track width 50 mm T-beam profile: height 320 x width 300 mm End beam length: 2425 mm (+ buffer pads, 60 mm each) Hoist, DEMAG - KONECRANES, type ZXT40410050P35FBL0F Hoist, manufacturer's number H0427815, year of manufacture 2004 Load capacity: 5 tons Rope arrangement: 4/1 Rope diameter: 8 mm Hook travel: 6 meters Main hoisting speed: 5.0 m/min Fine hoisting speed: 0.83 m/min Classification group: M5 Overall height from top of T-beam to bottom of crane hook: approx. 1100 mm Trolley travel speed: 0 to 20 m/min Crane travel speed: 0 to 30 m/min Djdpozd Urtjfx Ap Dsku Power supply: 400 volts, 50 Hz - Control box suspended on cable, freely movable - Control cabinet on the crane bridge - Trolley travel with electric limit switches - Crane travel with electric limit switches Space required for transport (crane bridge only): L x W x H: 4830 x 2540 x 1200 mm Weight of crane bridge: approx. 1.6 tons The crane bridge is in very good condition, like new.

Condition: used, Year of construction: 2004, operating hours: 1,961 h, lifting height: 8,300 mm, free lift: 2,400 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, fork width: 750 mm, total height: 3,330 mm, total length: 1,750 mm, total width: 1,270 mm, color: grey, Empty weight: 3.500 kg Lifting capacity: 1.600 kg Djdpfx Apjyvfphs Djku - Year: 2004 - Documentation available: Yes - └ Type Documentation: User manual - CE certificate present: No - Serial number: F24519R00338 - Operating hours: 1961 - Lifting capacity: 1600kg - Lifting height: 8300mm - Overhead clearance: 3330mm - Free lift: 2400mm - Fork length: 1200mm - Maximum fork width: 750mm - Attachment: Side-shift - Options: Free-lift - Mast: Triplex - Drive: Electric - Driving direction: 2 Road - Battery information: - └ Brand/Type: 4IPzS620 - └ Battery year of construction: 2008 - └ Capacity: 620Ah - └ Battery voltage: 48V - Transport dimensions: 1750mm x 1270mm x 3330mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, fuel type: diesel, axle configuration: 4x4, fuel: diesel, gearing type: automatic, Year of construction: 2004, From our immediately available stock of used vehicles, we offer you: Firefighting vehicle HLF 20 ALL-WHEEL DRIVE 4x4 on MB ATEGO 1328 AF General data: • First registration 03/2004 • Mileage: approx. 144,500 km • Unladen weight: 9,450 kg • Permissible total weight: 14,500 kg • New TÜV/MOT inspection Chassis: • MB 1328 AF 4x4 with 279 hp (205 kW) • Allison automatic transmission • Twin-tire rear axle Cabin: • Standard crew cabin (1:8) in RAL 3000 (fire engine red) • Mounting points for 2 compressed air breathing apparatus facing forward Superstructure: • Manufacturer: Schlingmann • HLF20 superstructure according to DIN standard • Three generously sized side equipment compartments on each side • Fold-out steps for the front and rear side equipment compartments • Mounting points for standard equipment • Mounting points for 2 additional compressed air breathing apparatus • Deployment system for 2 single-person reels Vehicle pump/fire extinguishing agent tank: • Firefighting centrifugal pump Schlingmann FPN 2000-10 • Output: 2,000 l/min at 10 bar • Water tank: 1,800 l • Foam tank: 150 l Firefighting equipment: • Fixed quick-attack hose, 50 m long, located on top Djdpfxsz Dq U Ij Ap Djku • Monitor on the vehicle roof Safety and lighting • Ambient lighting on the superstructure • Pneumatic lighting mast • Rear warning device We will gladly provide you with a detailed offer and show you the vehicle in Berlin. All information is provided to the best of our knowledge and belief, without guarantee for completeness and accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, wire diameter (max.): 12 mm, number of axes: 5, wire diameter (min.): 6 mm, This 5-axis Sodick AQ300L wire EDM machine was manufactured in 2004. It features a maximum workpiece weight of 660 lbs and a wire diameter range of 0.006" to 0.012". The machine is equipped with linear motor drives for enhanced precision. If you are looking to get high-quality electrical discharge machining capabilities, consider the Sodick AQ300L wire EDM machine we have for sale. Contact us for further details. • Control Unit: LN1W Linear Servo CNC Control • U & V Axis Travel: 3.1 x 3.1 inches (approx. 80 x 80 mm) • Max Workpiece Weight: 660 lbs (300 kg) • Max Workpiece Height: 7.87 to 8.66 inches (200 mm) Djdpoz D Eyfofx Ap Dsku • Wire Diameter: 0.006" to 0.012" (standard), with some setups accommodating up to 0.019" • Taper Cut Capability: ±20°

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily Dedpfxez Dxpmj Ap Doku More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...