Used Magic Forma F218 for sale (482)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, General information: Three-phase power transformer according to EN 61558. Technical data: Rated power: 42 kVA Primary voltage: 400 V Rated primary current: 108 A Secondary voltage: 35/95 V Rated secondary current: 88/408 A Iiodpfxjx Ap Duo Acroc Insulation class: T50F Degree of protection: IP23 Frequency: 50/60 Hz Continuous operation: ED 100%

Condition: good (used), Year of construction: 2003, 1 x Formax F6 Year: 2003 Iedpfoyw Imtox Acroic With tenderform and paper interleave

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2838 664, type of input current: AC, overall weight: 4,710 kg, input voltage: 16,800 V, total height: 1,820 mm, total width: 1,270 mm, total length: 1,920 mm, nominal power (apparent): 2,000 kVA, secondary voltage: 420 V, protection type (IP code): IP54, temperature: 40 °C, space requirement width: 1,270 mm, space requirement length: 1,920 mm, space requirement height: 1,820 mm, Equipment: type plate available, Three-phase oil transformer according to IEC 60076, hermetically sealed design suitable for ambient temperatures from -25°C to 40°C and maximum installation altitude of 1,000 m above sea level, for outdoor installation, with aluminium windings, routine test according to IEC60076, in accordance with Regulation (EU) No. 548/2014 of 21.05.14 Stage 2, valid from 01.07.2021. Iisdpfxsynhwro Acrjc

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 118394, type of input current: AC, overall weight: 2,540 kg, input voltage: 21,500 V, input frequency: 50 Hz, nominal power (apparent): 800 kVA, secondary voltage: 420 V, protection type (IP code): IP00, temperature: 100 °C, type of output current: AC, output voltage: 420 V, Equipment: type plate available, Transformer that has been used on short occasions for backup operation, especially the last two years, is in a heated container. Can be sold with or without container, can also be rented for short periods, We have our own crane truck if express delivery is needed. The container can also be supplemented with low-voltage switchgear made by ABB Kabeldon attached to the outside of the container. Iiedpfx Acox Run Dorec

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 60.04.102.21, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input current: 40 A, input frequency: 50 Hz, type of input current: AC, planing width: 630 mm, actuation type: electric, total length of planing tables: 2,250 mm, total width: 1,200 mm, total height: 1,200 mm, overall weight: 1,100 kg, Equipment: CE marking, documentation/manual, Thickness planer Exact 63 with: four-spindle lift table, feed roller, outfeed table, steplessly adjustable feed, Silent Power planer shaft with HM reversible knives, max. pass-through height 300 mm, max. pass-through width 630 mm. Max. material removal per pass: 10 mm. Estimated operating hours: 200. Single ownership. Iijdpfxjym Sfqs Acrec

Condition: excellent (used), Formax F6 direct from test facility. Machine in lovely condition. Iijdpfx Acsx I I Ewsrec

Year of construction: 2002, condition: used, Formaco meat former press Model: FLL800/160/1 Iiedpfx Ajb Uaiyocrsc Serial: 1100 2002, Stainless, Meat former press, votage/Hz 3x400/50, 16Amp

Condition: excellent (used), Year of construction: 2016, Format 4 Kappa 550 Positioning control e-motion – TFT screen Year of manufacture: 2016 320 cm sliding table 5.5 kW motor with brake Scoring unit control Max cutting height: 200 mm Saw blade: 250 - 550 mm Speeds: 3000 / 4000 / 5000 rpm Scoring blade rotation speed: 9000 rpm Motorized rip fence Saw blade tilting up to 45 degrees, single-sided Electric height adjustment Operator panel at eye level Crosscut fence with digital display Movable support rail with digital angle display Crosscut fence with length compensation Extraction connection: 120 mm and 100 mm Iedpfxsx Rugtj Acreic Extension arm with swing-away function Cutting width: 1348 mm Crosscut fence up to 3200 mm Control station on sliding table Dimensions (without extension arm): 3400 x 2200 mm Weight: 1300 kg

Condition: new, Transformer 220 V mono to 380 V tri Iiedpfxoyk E Hvj Acroc Power converter: 10 kW New, never used Dimensions (L x W x H): 800 x 600 x 500 mm

Condition: excellent (used), Year of construction: 2010, Technical Data Vertical cutting height: 2,200 mm Horizontal cutting height: 2,080 mm Extraction port: 2 x 100 mm Width: 1,700 mm Height: 3,000 mm Length: 6,570 mm Motor power: 7.5 HP (5.5 kW) Motor voltage: 3 x 400 V Ijdpfsud Sk Sox Acreic Saw blade diameter: 300 mm Cutting length: 5,300 mm Cutting depth: 80 mm Digital display for horizontal and vertical cuts Year of manufacture: 2010 Net price: 11,190

Condition: used, Albatros Numerical Control with TPA CAD Software Working range on X-axis mm 3260 Working range on Y axis mm 1200 Working range in Z-axis N ° 2 work fields Bar worktop No. 6 electronically adjustable bars by C.N. Line laser for virtual 0 position in Y direction N° 4 pneumatic Bakelite bars for lifting the panel No. 3 electronically adjustable suction cups by C.N. for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis, with automatic tool changer with No. 10 positions, Hsk type cones Automatic tool change system with 12 positions - positioned on the machine side Drilling head with 17 spindles arranged as follows: - No. 8 verticals on X axis - N° 5 verticals in Y axis - No. 2 horizontal on X axis - N° 2 horizontal in Y axis No. 2 blade groups for making grooves on the X and Y axes Front protection and safety system with carpets Automatic lubrication system (Air conditioning system for cooling and cleaning of machine control) Vacuum pump mc/h 250 Iijdsvph Hxopfx Acrec

Condition: good (used), Year of construction: 2001, machine/vehicle number: 60.11.012.01, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 155 mm, saw blade diameter: 450 mm, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,610 mm, pivoting range: 45 °, table length: 3,200 mm, table width: 1,610 mm, Equipment: motor brake, scorer, Format-4 Kappa 450 – Panel Saw – Well-Maintained Condition For sale is a Format-4 Kappa 450 panel saw from the manufacturer Format-4 (Felder Group), year of manufacture 2001, in fully functional and well-maintained condition. Features and Equipment: - Integrated scoring unit - Extra-wide rip fence – up to 1,610 mm cutting width The machine has been regularly serviced and is in good technical and visual condition. Key Technical Data: Iisdpfexvdqisx Acrec Model: Format-4 Kappa 450 Year: 2001 Saw blade diameter: max. 450 mm Cutting width at rip fence: 1,610 mm With scoring unit and tilting function Condition: Used, well-maintained, fully operational.

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 220.01.016.22, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, rotary table diameter: 750 mm, rotational speed (max.): 12,000 rpm, The machine is being auctioned due to a business closure! Further details on the machine’s equipment can be found in the attached order confirmation. TECHNICAL DETAILS Workpiece height: 8–60 mm Rotary table edge magazine diameter: 750 mm Edge banding material (coil): 0.4–3 mm Rotary table diameter for coil edge material: 740 mm Support surface (workpiece infeed): 600 mm Spindle speed of diamond pre-milling unit: 12,000 rpm Feed speed, chain feed: 10 and 18 m/min Spindle speed, cross-cut saw unit: 12,000 rpm Upper multifunctional milling unit speed: 12,000 rpm Lower multifunctional milling unit speed: 12,000 rpm Cutter assembly: 64 mm MACHINE DETAILS Ijdpfx Aoxwt Nqscrjic Electrical data Voltage: 400.0 V Phases: 3 Frequency: 50/60 Hz Current: 28.0 A Power: 15.0 kW EQUIPMENT Ball bearing rotary table for edge banding coil material Workpiece infeed and feed fence with manual adjustment Chain feed with two speeds Edge feeding for coil and strip material in single feed Upper and lower multifunctional milling unit x-motion PLUS via smartouch Upper and lower radius scraper blade x-motion PLUS Corner rounding unit with motorized adjustment for postforming and softforming profiles Upper and lower polishing units Pneumatic-mechanical infeed stop for workpiece gap monitoring glueBox application unit

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, operating hours: 6,000 h, travel distance X-axis: 3,550 mm, travel distance Y-axis: 1,680 mm, travel distance Z-axis: 275 mm, feed rate X-axis: 80 m/min, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range X axis: 3,550 mm Travel range Y axis: 1,680 mm Travel range Z axis: 275 mm Main spindle max. speed: 24,000 rpm Working area X axis: 3,060 mm Working area Y axis: 1,210 mm Working area Z axis: 100 mm Speed X: 80 m/min Speed Y: 80 m/min Speed Z: 25 m/min MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 5,900 x 4,020 x 2,340 mm Weight: approx. 3,350 kg Extraction port diameter: 200 mm Operating hours: approx. 6,000 h EQUIPMENT Linear tool changer with 8 positions, traveling Side pick-up station for 2 tools Traveling pick-up station for aggregate/tool HSK F63 14 vertical drilling spindles (9 in X and 5 in Y direction) 6 horizontal drilling spindles (4 in X and 2 in Y direction) 1 grooving saw (4-10 mm), arranged on X-axis 1 main spindle HSK F-63, 9 kW Preparation for 0-360° C-axis 6 consoles for holding vacuum clamps Traveling laser for vacuum suction cup positioning Iedpfoyc Smgjx Acrsic 2 working areas for pendulum operation Handheld terminal Automatic central lubrication Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 4,650 h, edge thickness (max.): 3 mm, product height (max.): 45 mm, product height (min.): 10 mm, product length (min.): 140 mm, product width (min.): 70 mm, TECHNICAL DETAILS Machine stand: tempora 45.03L, made of thick-walled electro-welded steel construction Control x-motion plus control: Swiveling 15" smartouch Unlimited storage space for user-defined edge programs Fine adjustment of the path parameters Optimization of edge overhangs when pre-cutting at the front and rear Chain feed Feed speed: 9 m/min Drive motor: 1.5 kW (S6) Precision running and guide surfaces Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm Segmented, rubberized support pads with quick-change system Rotary table edge magazine Roll edge material diameter: 740 mm Roll edge material edge thickness: 0.4 - 3 mm Pull-out frame Workpiece support: extendable up to 450 mm with roller conveyor for ergonomic working with larger workpieces Upper Pressure beam Workpiece height: 8–45 mm Pressure beam made of welded, torsion-resistant steel construction Top pressure rollers arranged in two rows Edge feed Driven rubberized feed roller Edge thickness: 0.4 - 3.0 mm Workpiece feed Extendable workpiece support: up to 450 mm Chip removal joining unit: 0 - 2 mm (on the feed ruler), digital counter Joining unit Power: 2.2 kW, diamond cutter Z2, speed: 12,000 rpm 2x1.1 kW (1.5 HP) Chip removal: max. 2 mm Workpiece height: max. 45 mm Joining cutter with diamond cutting edges Z2+2, D-80 x 49 mm (angled and tear-free workpiece edge) Glue unit Glue unit: Teflon-coated, for 1.5 kg EVA or PUR Granules Heating time: 10 minutes Linear meter output: 375 linear meters (for 19 mm board) Finely adjustable glue roller Pressure unit 1 aluminum roller at a 90° angle 1 rubberized pressure roller Scissor shears Roll edge material thickness: 0.4 - 3 mm Used for pre-cutting, swinging Cross-cut saw unit 0.15 kW, speed 12,000 rpm with 90° round shaft guide Cross-cut saw unit with 45° travel path with 0.35 kW, 12,000 rpm A choice between 0° and 10° cut is possible Milling unit Multifunctional milling unit: x-motion plus, 2 high-frequency motors, 0.75 kW each, 12,000 rpm Alternating blades: 4 each Accuracy: 2-axis adjustment enables Fine adjustment in the 1/100 mm range Motorized corner rounding unit Corner processing unit for post and softforming profiles Workpiece height: 10 - 45 mm Edge thickness: 0.4 - 3 mm HW milling cutter with 2 cutting edges Radius: max. 6 mm Workpiece length: min. 270 mm (at 19 mm height) Radius scraper unit Processing of 2 mm plastic edges Adjustment of the scraper via digital counter and m-motion positioning system Scanning of the workpiece contours Polishing unit Upper and lower polishing unit Iiodpfxjwwq Dzs Acrjc Spray device for cleaning agent Surface scraper Upper and lower surface scraper for any adhesive residue. Scanning of the workpiece contours Multifunctional milling unit for cup hinge drilling for processing workpieces with cup hinge drilling, rear wall grooves and acute-angled workpieces

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 175 h, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,700 mm, workpiece width (max.): 950 mm, overall weight: 2,500 kg, table width: 950 mm, working width: 950 mm, air pressure: 6 bar, feed length X-axis: 3,700 mm, feed length Z-axis: 80 mm, power of the milling unit: 12,000 W, rotational speed (max.): 24,000 rpm, Equipment: rotational speed infinitely variable, Lightly used 3-axis CNC machine available immediately! 4-sided formatting 12kW main motor HSK 63F Automatic 4-position tool changer Isdpfexmbm Ajx Acrjic Pickup station for additional tools Drilling head DH17 2 alignment stops in X-direction for short/long panels Foldable tables at front and rear Software on the machine AND in the office with dedicated license DXF import Modern, fully-featured CNC machine with low operating hours – immediately available!

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 - right - left rotation - Drilling spindle stroke 150 mm - drilling spindle speed infinitely variable 80 - 1170 rpm - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm - Height adjustable via toothed rack with hand crank - Drive 400 V / 0,9 / 1,3 kW Ijdpsdkx Ansfx Acrjic - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - coolant device - quick-action drill chuck 1-13 - illumination

Condition: used, maximum load weight: 2,150 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 02/2022, total width: 2,150 mm, total height: 890 mm, Temared trailer Winch Iedpfx Acey Dyz Aorjic 3 axles First registration / Year of manufacture: 17.02.2022 / Vehicle type: Semi-trailer Body type: Platform KBA No. (HSN/ TSN): 1897//000 Paint color: Silver Number of previous owners: 1---- The vehicle is unprepared! Nationwide delivery available for an additional charge. Errors and prior sale reserved. We are happy to take your vehicle in part exchange. Financing / leasing also available with no down payment! Do you have questions? We are happy to advise you!

Condition: good (used), Year of construction: 2007, Eckold tool ECKOLD - FWR1307X Stretching tool for MAX. 6 mm MACH-ID 3811 Make: ECKOLD Type: FWR1307X Stretching tool for MAX. 6 mm Year: 2007 Iiodozdgb Ispfx Acrsc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 133, product width (max.): 270 mm, working width: 270 mm, type of input current: three-phase, Equipment: documentation/manual, Semi-rotary flexographic printing machine, MALBATE Mecaformat 270. 5 printing units + 1 varnish unit + rotary magnetic die-cutting unit. Isdpfxeyr R Sgs Acrsic UV drying - 6 drying units. Average power consumption: ~25 kW. Compressed air: 7/8 bar. Maximum web width: 270 mm. Minimum web width: 150 mm. Maximum feed length: 220 mm. Minimum feed length: 50 mm. Maximum printing width: 260 mm. Maximum printing length: 305 mm. Maximum length of the semi-rotary cutting die: 220 mm. Maximum unwind roll diameter: 3000 m. Unwind roll diameter: 800 mm. Rewind waste roll diameter: 450 m. Rewind roll diameter on the automatic winder: 360 m. Maximum speed: 10,000 impressions/hour. The machine is in production. You can schedule an inspection. Details are available in the PDF file. Please contact us for further information.

Condition: used, machine/vehicle number: 007818, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Iiodewu Ab Topfx Acroc Max feed speed: 40 m/min Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics Isdpjy Hyl Tefx Acreic - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: new, Siemens 4BU5695-0CC02-0C control transformer, in a housing on casters, unused, 100% functional, new price €8,000 net! - Please inquire about shipping costs separately! Please ask for transport charges! Iedpfji Edbrox Acrsic

Condition: new, Michael Riedel DROP 50 NA transformer, unused, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Iiedpfx Aox Et I Secrec

Condition: new, Michael Riedel Drop 50 isolation transformer for WIA Corporation - IP23, unused, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Iodpfsx Et Ncsx Acroic