Used Maico Dzf45/6B for sale (957)

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser –(15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. Iisdpoy Ecuzefx Agyjh The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: 16 Bar Version Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 119, spindle motor power: 5 W, turning length: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 99 rpm, turning diameter: 16 mm, overall weight: 2,300 kg, type of input current: three-phase, bar passage: 16 mm, total width: 1,340 mm, total length: 1,850 mm, total height: 1,685 mm, input voltage: 380 V, number of driven tool stations in tool turret 1: 6, number of driven tool stations in tool turret 2: 6, Equipment: documentation/manual, rotational speed infinitely variable, I am offering my lathe for sale, complete with the accessories shown in the pictures. Iisdpey Udcfofx Agyeh It includes a bar feeder and a chip conveyor. The machine is controlled by a Yasnac CNC system. The machine has two turrets, allowing for multi-axis and multi-group control.

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x6, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 61,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - All-wheel drive - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beam - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Air horn - Particulate filter - PTO (Power Take-Off) - Radio / multimedia system - Reversing camera - Sliding roof - Sleeper cab - Seat heating - Sun visor/flap - Lane departure warning system - Stability control - Auxiliary heater - Warming-up automatic Iiodpjy T Ncnjfx Agyoh - Toolbox - Windshield Internal reference number for customer inquiries: 4-093 MAN TGS 33.520 6x6 BL Short Timber Platform Body with Epsilon Crane! Wheelbase: 3,900 mm !!! ALL-WHEEL DRIVE !!! !! IMMEDIATELY AVAILABLE FROM STOCK !! EURO 6E !! * Cab TM: the comfortable one (narrow, long, medium-high) * All-wheel drive 6x6 * Suspension type: leaf/air (BL) * 3,900 mm main wheelbase, 1,400 mm wheelbase between rear axles * Diesel engine MAN D2676 LF78, 520 HP, 2,600 Nm torque, Euro 6e * Automatic transmission MAN TipMatic 12.28 OD with Retarder 35 * Retarder Eco, speed-dependent, multi-stage, energy-efficient * High-performance engine brake MAN EVBec, multi-stage * Differential locks: front, rear, and center of the driven rear axles * Trailer coupling ROCKINGER type 500 G 6A (or 40 mm on request) * Control panel MAN EasyControl, 4 functions, operable from outside with door open * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and seat heating * Multifunction leather steering wheel, adjustable in height and angle * Lower bunk with slatted frame and adjustable head section * Electric interior sun visor on the front windshield * Pull-out refrigerator and drawer * Infotainment control MAN SmartSelect with touchpad and direct access * MAN Media System Navigation Professional, 12.3" * MAN Advanced Sound System with subwoofer * Smartphone integration Superstructure: Loading length up to crane base 6,100 mm (Austria and South Tyrol special version) * Platform dimensions approx. 5,700 mm length, 2,540 mm width * Platform color: black * 8x OPTIPA ALU10 stakes with quick-change wedges, so stakes are removable anytime (for transporting sawn timber, straw, hay, or silage) * Stakes can be stored upright in front of the headboard * Rack strips between the stake pockets * Lashing points on the outer frame * Robust steel headboard * Extendable ladder at the front and rear for access to the platform * Prepared for manual strap tensioners (Autonordic) or alternatively Luftmann (ExTe TU) * Stainless steel toolbox under the loading area Crane: EPSILON FULLY HYDRAULIC TIMBER LOADING CRANE* -> Version according to your choice (e.g. in stock: Epsilon TZ15 98) * Maximum moment: 104 kNm * Slewing range: 425° * Elevated seat with 2 mechanical levers, 2 mechanical foot pedals * And much more. Financing available through our finance partners. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and amendments.

Condition: good (used), Spindle amplifier module, Servo Amplifier Module, CNC Control System, Plug-in card, -Manufacturer: FANUC -Type: A06B-6152-H045H580 -Dimensions: 150/380/H290 mm -Weight: 8.2 kg Iedpfx Aewrxzwogyeih

Condition: ready for operation (used), Fanuc A06B-6087-H130 Power Supply Module SN:EA7601604, used, normal signs of wear, 100% functional, scope of delivery as per photos. Iiedpfx Ajx Era Hegysh

Condition: ready for operation (used), Fanuc A06B-0128-B175 AC servo motor, serial number: C989C3562, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iiodpfx Agezt Uv Rjyoh

Condition: ready for operation (used), Fanuc A06B-0128-B575 AC servo motor, serial number: C98XC1650, used, in good condition, 100% functional, scope of supply as shown in the photos. Isdpfx Ajzuif Aegyjih

Condition: ready for operation (used), Fanuc A06B-6079-H207 / B-65162 servo amplifier, serial number: EA8801236, used, in good condition, 100% functional. Scope of delivery as shown in the photos. Iedpfxezuigms Agyoih

Condition: used, Year of construction: 2010, operating hours: 62,569 h, functionality: fully functional, machine/vehicle number: 00410001121, spindle speed (max.): 5,000 rpm, overall weight: 5,695 kg, Equipment: documentation/manual, We are offering this used DMG CTX beta 500 V6 CNC turning and milling center, year of manufacture 2010. Iisdozv Tbqopfx Agyoh Serial number: 00410001121 Year of manufacture: 2010 Max. main spindle speed: 5000 rpm Max. counter spindle speed: 6000 rpm Weight: 5695 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Fanuc A06B-0373-B175 AC servo motor, serial number: C981F1602, without encoder/pulse coder, used, in good condition, 100% functional, scope of supply as shown in the photos. Isdpszh Sa Aefx Agyoih

Condition: excellent (used), Year of construction: 2007, 1 used container steam boiler ----- Iisdpjzguypsfx Agysh - installed in a 20” sea container - Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 m² Boiler output max.: 1,250 kg/h Operating pressure: 16.0 bar Increased test pressure: 29.6 bar Water content at nominal water level approx.: 993 l Water content when full approx.: 1,365 l Year of manufacture: 2007 CE marking: 0036 Equipped with a Weishaupt WMGL combination gas/oil burner, gas control system, control panel, feedwater pump, and the existing coarse and fine fittings.

Condition: ready for operation (used), Fanuc A16B-2202-0726 / 06B800303 circuit board / card, used, in good condition, 100% functional, scope of supply as shown in the photos. Iodozt H Eqspfx Agysih

Condition: used, Electric Motor, Elin 45 kW – 84 A, Used Machine Manufacturer: Elin Type: MKG-222 M04 P6B-9 Power: 45 kW Rated Current: 84 A Shaft Diameter: 50 mm Electrical Specifications: Supply Voltage: 400 V Power: 45 kW Rated Current: 84 A Overall Dimensions: Width: 840 mm Depth: 450 mm Height: 580 mm Iijdpfxszmytho Agyoh

Condition: used, Year of construction: 2015, operating hours: 2,991 h, load capacity: 1,600 kg, fuel type: electric, gearing type: automatic, overall weight: 500 kg, empty load weight: 276 kg, color: silver, mileage: 2,991 km, first registration: 08/2015, suspension: other, number of seats: 1, driver cabin: other, emission class: none, fuel: electricity, The Still EXU 16 low-lift pallet truck, fitted with a 2020 battery, is a used electric forklift. It was first registered on 31.08.2015 and has an operating time of 2,991 hours with a recorded mileage of 2,991 km. The truck comes in a silver finish and is equipped with an automatic transmission. This machine is suitable for the transport of light loads, with a permissible total weight of 500 kg. The low-lift pallet truck is designed for a single operator and is powered exclusively by an electric drive system. The machine can be inspected on weekdays and Saturdays, without prior appointment. Further information and contact options can be found on the seller’s website. Iiedpsxxb Haefx Agyjh Sale exclusively to commercial customers (agricultural businesses, freelancers, small and large enterprises) or for export. Errors and prior sale excepted.

Condition: excellent (used), mileage: 1,12,871 km, power: 324 kW (440.52 HP), first registration: 01/2011, fuel type: diesel, axle configuration: 10x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, parking heater, power mirror, soot filter, spoiler, = Further Options and Accessories = - Aluminum fuel tank - Brake booster - Roof spoiler - Speed limiter - Refrigerator - Alloy wheels - Air suspension - Particulate filter - Reversing camera - Sleeper cab - Sun visor - Stability control - Auxiliary heater - Toolbox - Power take-off (PTO) - Central lubrication = Further Information = Front axle 1: Steered Front axle 2: Steered Rear axle 1: Lift axle; Steered Body manufacturer: RSP ESE 40/10-DV-K Technical condition: very good Optical condition: very good MAN TGS 35.440 10X4 TRIDEM RSP SUCTION EXCAVATOR EURO 5 L PACKAGE 440 HP Iodpfx Aeuxp Slogysih 10X4 TRIDEM DRIVE, LAST AXLE LIFTABLE AND STEERABLE WHEELBASE 450 CM AIR SUSPENSION SLEEPER CAB WITH AIR CONDITIONING, REFRIGERATOR, CAMERA SYSTEM DIFFERENTIAL LOCK MANUAL TRANSMISSION RSP SUCTION EXCAVATOR (TYPE: ESE 40/10-DV-K) 2 TURBINES POWER BOOM CENTRAL LUBRICATION 5X RADIO REMOTE CONTROLS ADDITIONAL HIGH-PRESSURE PUMPS, HOSES, AND GUN ADDITIONAL AIR VALVES AT THE REAR OF THE TRUCK FOR OPERATING AIR TOOLS SUCH AS A HAMMER ADDITIONAL HYDRAULIC CONNECTION AT THE FRONT OF THE TRUCK COMPRESSOR: 4843 HOURS FAN: 2919 HOURS ALL AVAILABLE MANUALS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: good (used), Year of construction: 2020, PLC control, digital output, digital output module, digital input -Manufacturer: Siemens, Simatic ET 200SP Digital Output Module with Base Unit -Type: 6ES7 136-6BA00-0CA0 Iiedpfjx T A R Sjx Agyeh -Base unit: SIMATIC ET 200SP 6ES7193-6BP20-0BA0 -Number: 3 modules available -Price: per piece -Dimensions: 140/20/H70 mm -Weight: 0.1 kg/pc

Condition: good (used), Year of construction: 2020, PLC control, digital output, digital output module, digital input, Base Unit -Manufacturer: Siemens, Simatic ET 200SP Base Unit -Type: 6ES7 193-6BP20-0DA0 -Number: 20 modules available -Price: per piece Iedpfxjx Updhe Agyeih -Dimensions: 140/20/H35 mm -Weight: 0.1 kg/pc

Condition: good (used), mileage: 5,16,000 km, power: 265 kW (360.30 HP), first registration: 01/2014, fuel type: diesel, axle configuration: 6x4, wheelbase: 54,000 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 8,700 mm, total width: 2,440 mm, total height: 2,850 mm, Year of construction: 2014, Equipment: AdBlue, air conditioning, Curtain-sided semi-trailer, dimensions: 8.70 m x 2.44 m x 2.85 m – hub reduction – air conditioning – gross vehicle weight 26,000 kg – unladen weight 12,215 kg – wheelbase 5,400 mm = Further information = Front axle: steered Engine displacement: 11,946 cc Unladen weight: 12,215 kg Payload: 13,785 kg GVW: 26,000 kg Reference number: 31 Please contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm. Iiedpjyaibvofx Agyeh

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain -Gear: 76 teeth -Sprocket pitch: 1" x 17.02 mm 16B-1 -Shaft mounting: Inner Ø 50 mm -Dimensions: see drawing in the photos -Number: 4x gears available -Price: per piece Iedpfx Agjyn I Tgoyjih -Overall dimensions: Ø 628 x 58 mm -Weight: 38 kg

Condition: used, FANUC SERVO AMPLIFIER Iiedpfx Agjyn R Umeyjh Condition: As good as new Type: A06B-6290-H207

Condition: used, FANUC SERIES 31i-B5 24V DC 4.4A max. Isdpfx Agsyn Sakjyoih Condition: As good as new Type: A02B-0326-B802

Condition: used, FANUC A06B-6124-H109 Servo Amplifier Module Welcome to the Fanuc A06B-6124-H109 servo amplifier, a masterpiece of precision and performance. This servo amplifier is the ideal solution for industrial applications that demand the highest levels of accuracy and reliability. Developed by Fanuc, a global leader in CNC control technology, the A06B-6120-H075 stands for quality and innovation. Iodpfx Agsyn Saqjyoih With its impressive power output and robust design, this servo amplifier is perfectly suited to meet the most demanding requirements of modern manufacturing environments. Its precise control and fast response times ensure outstanding performance across a range of applications, from machine tool control to robotics. Experience the unmatched precision and reliability of the Fanuc A06B-6120-H075 servo amplifier and take your industrial applications to a new level of performance.

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 3,500 kg, fork length: 2,200 mm, Fork positioner ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Iodoyz E Rwspfx Agyoih Technical condition: good Description: Year 2018 ISO 3A (51 cm) Capacity 3,500 kg Sideshift Width 1,150 mm Opening range 320-1,120 mm Forks 2,200 mm ID OS1970

Condition: good (used), Year of construction: 2011, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-0269-B100 -Power: 5.5 kW Iijdpfx Agewvfgzoyoh -Speed: 3000 rpm -Technical data: see photo type plate -Shaft: Ø 35 x 75 mm -Dimensions: 320/175/280 mm -Weight: 23 kg

Condition: used, FANUC SERVO AMPLIFIER Iodpfx Asypwbvegyoih Condition: As good as new Type: A06B-6252-H030