Used Mas Kovosvit Vom 50 for sale (37,907)

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. CE marking. No inspection book available. Suction cup rubber replaced. As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier." Hsdpfx Abov S Synj Ient

Condition: as good as new (ex-display), Year of construction: 2022, Features: - E-Control 20 Dual Screen with bending sequence simulation - 6-axis back gauge with 100 mm stroke (right ±50 mm) - E-Bend S sensor for thickness control on Z1 - Wila NSCR-II HC Premium table - Wila NSCL-II HC Premium tool holder Hsdez A Tg Dopfx Ab Isnt - Pair of front sheet metal supports - Bending force: 500 kN - Usable bending length: 2,040 mm - Usable stroke: 300 mm - Maximum opening: 590 mm - Rapid approach speed: 160 mm/sec - Interface for Industry 4.0 - Standard tool kit

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created • Measuring probe newly calibrated Hnjdjziz S Depfx Ab Iot • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided The machine was subsequently fully inspected and approved by DMG MORI.

Condition: used, Year of construction: 2014, Technical details: Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm Hodpfxeu Nftte Ab Isnt table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: excellent (used), Swing over bed 360 mm Distance between centers 650 mm Hnodsrx Rwnopfx Ab Ijt Spindle speeds 20-3250 rpm Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Hnjdpfx Aboz Aplxe Ijt Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: used, Year of construction: 1990, machine/vehicle number: 9417, functionality: fully functional, operating hours: 85,640 h, power: 28 kW (38.07 HP), input voltage: 380 V, input frequency: 50 Hz, pressing force: 50 t, stroke length: 51 mm, total length: 1,820 mm, total width: 2,890 mm, total height: 3,090 mm, Pressing force: 50 t Adjustable ram stroke: 16 - 51 mm (currently fixed at 51 mm) Ram adjustment: 64 mm Hjdpfx Abozp Ukyo Ijnt Table clamping surface area, approx.: 930 x 590 mm Number of strokes per minute: 100 - 750 min-1 Power consumption: 28 kW

Condition: good (used), Colchester Master 2500 In good condition. Hsdpfozp U Apox Ab Ient Includes some accessories. Transport can be arranged.

Condition: used, Year of construction: 2019, operating hours: 6,744 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 18,000 m/min, feed length X-axis: 1,016 mm, feed length Y-axis: 660 mm, feed length Z-axis: 630 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, feed rate Z-axis: 12,700 m/min, nominal power (apparent): 45 kVA, torque: 460 Nm, controller manufacturer: Haas, controller model: Haas, workpiece length (max.): 1,370 mm, workpiece width (max.): 610 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 1,814 kg, total height: 630 mm, total length: 1,370 mm, total width: 660 mm, table width: 610 mm, table height: 630 mm, table length: 1,372 mm, table load: 1,814 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,454 h, spindle motor power: 44 W, number of slots in tool magazine: 30, Equipment: chip conveyor, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Buy both machines together for €125,000. Excellent opportunity for a complete Haas machining package. • Haas VF-3YT/50, 2019. • 10,000 rpm original high-performance spindle, 44.7 kW, vector drive, gearbox • 2-speed gearbox • ISO 50 tool holder • 30 ATC (Automatic Tool Changer) • Chip conveyor with 4 additional lead screws • RTAP-3 – Synchronized threading without expensive holders with compensation • TSC 300 psi (21 bar) Hsdpfx Abezc Ni Ss Iont • Coolant chiller • Programmable coolant nozzle • MIN QTY LUBE • Automatic air gun • TAB – air cooling through the spindle • Renishaw WIPS – measuring, scaling, rotation • High-speed machining • ACF 25-micron filter • Electrical cabinet cooler • Mist condenser • 4th-axis pre-wiring • DWO/TCPC • WIFI connection to local network • WIFI camera • Automatic door • 15 tool holders • 4,454 hours of cutting (Spindle On Time) • 6,744 hours of cycle time The machine is powered on and available for inspection at any time. Complete documentation available. Original paint, no accidents, no crashes. Regularly maintained machine. Immediate availability.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 31,900 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP-200M, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis Okuma MA-600HB was manufactured in 2006. It features a maximum spindle speed of 12,000 RPM and a BT50 tool holder. The machine is equipped with a coolant system in the spindle at 30 bar and includes a Renishaw MP10 for tool measurement. If you are looking to get high-quality machining capabilities, consider the Okuma MA-600HB horizontal machining centre we have for sale. Contact us for further details. • Coolant through spindle: 30 bar • Tool breakage detection • MOP-Tool • DNC-DT Additional equipment • NC table 0,001 (NC rotary/indexing table) Hjdpezx D Dzofx Ab Isnt • Renishaw MP10 probe • Mayfran MT10 (chip conveyor/coolant handling) Technical Specification Taper Size BT 50

Condition: like new (used), For sale is a Hammer edge sanding machine HS950, with a belt length of 2515 mm. The machine is in good condition and has been inspected by our specialist staff. - Belt length: 2515 mm - With oscillation motor - Tiltable 0 - 90° - Motor power: 2.2 kW / 3 HP - Year of manufacture: 2024 Hedpfxjw Hf D Ie Ab Ient - Demonstration machine The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: edge sanding machine, sanding machine, surface finishing Reference: R-A0117

Condition: ready for operation (used), Year of construction: 2007, overall weight: 27,000 kg, spindle speed (max.): 6,000 rpm, This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, it's ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine. Hnsdpfszycdcox Ab Iet • Axes: 4 • Maximum Machining Area X/Y/Z: 1000 mm x 900 mm x 1000 mm • 4th Axis: 360° x 1° • Rapid Feed Rate: 30 m/min – 12 m/min • 1° B-axis • Drive Power/Max. Torque: 37 kW 10 min, 26 kW continuous load / 606 Nm • Tool Positions: 150 • Tool Holder: MAS BT 50 • ConSep System • Measuring Probe • Tool Breakage Monitoring • Pallet station with 6 pallets, pallet size 630 x 630 mm • External cooling/internal cooling 20 bar/internal air Dimensions Machine Depth 10500 mm

Year of construction: 2021, condition: used, overall weight: 27 kg, terms of delivery: FCA Pegnitz Hnedpfx Aboz Ali He Iet delivery time: on request terms of payment: 100% prior to delivery

Condition: ready for operation (used), functionality: fully functional, grinding length 500 mm grinding width 200 mm workpiece height 250 mm table surface 600 x 200 mm grinding wheel dimensions 225 x 20 x 51 mm grinding spindle drive 1.5 kW table feed 1 - 20 m/min Hedpfoz Aynwsx Ab Isnt total power requirement 2.6 kW machine weight approx. 2 t machine dimensions approx. 2.6 x 1.6 x 1.8 m

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,200 kg, total length: 2,500 mm, total width: 500 mm, total height: 1,200 mm, Spline broaching machine (internal broaching machine) VEB Maschinenfabrik "John Schehr", Meuselwitz, year of manufacture approx. 1955, with extensive accessories Condition: functional Year of manufacture: approx. 1955 Location: West Saxony Price: €3,000 (negotiable) Technical data: Manufacturer: VEB Maschinenfabrik "John Schehr", Meuselwitz, Leipzig district Manufacturing number: 6171 Total weight: approx. 2.2 t Broaching length: approx. 1,000 mm Type of current: three-phase, 50 Hz Operating voltage: 220 V Accessories: Extensive stock of broaching tools (various spline shapes/sizes) available Description: For sale is a historical spline broaching machine (horizontal internal broaching machine) from VEB Maschinenfabrik "John Schehr", Meuselwitz – a well-established, internationally recognized East German machine tool manufacturer. The machine is used to broach splines (e.g. keyways) in bores using broaching tools and has a broaching length of approximately 1,000 mm. The scope of delivery includes an extensive stock of broaching tools in various designs – a significant added value, as corresponding tools are hardly available on the market anymore. The machine is functional. Inspection and functional testing at the location in West Saxony are possible by arrangement. Price: €3,000 (negotiable) Other machines available from site liquidation Site takeover negotiable Hnodpfx Aezyl E Nsb Iet

Condition: reconditioned (used), Year of construction: 2015, operating hours: 810 h, functionality: fully functional, working width: 650 mm, area performance: 3,500 m²/h, overall weight: 447 kg, warranty duration: 12 months, water tank capacity: 75 l, HAKO SCRUBMASTER B75 R TB650 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2015 with 810 hours of operation 650mm cleaning head (TB650) equipped with new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. A new rubber guard around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. Hjdpfsy Uhvpox Ab Iont TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 650 Suction nozzle working width (mm): 860 Working speed (km/h): 5.5 Tank capacity (l): 75/75 Number of brushes (pcs): 2 Brush speed (rpm): 180 Efficiency (m²/h): 3500 Gradeability (%): 10 Weight (kg) 447 W INCLUDED IN THE KIT: NEW 6V 175Ah SIAP GEL BATTERIES (4x) NEW 24V 600W suction turbine NEW 330mm PPL 0.5 disc brushes (2x) NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 75-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. Its small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (650 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, HANG 101-50 electric eyelet machine Electric single-head eyelet machine 101-50 PiccoStar for eyelets No. 269 / 270, Ø 5.0 mm. Automatic eyelet feed. Hjdpfxjzy D A Hs Ab Isnt Suitable for paper, cardboard, plastics, etc. Ideal for contracts and documents. Perforates and sets eyelets in a single operation (the eyelet punches the hole). Infinitely adjustable back edge stops guarantee precise positioning. Push-button to trigger the eyelet setting process. With self-piercing eyelets, up to 30 sheets of 80 g/m² paper or material thickness up to 3 mm. With pre-punched material: up to 50 sheets of 80 g/m² paper or material thickness up to 8 mm. Weight: 36 kg / Voltage 230 volts / Tool / Operating manual.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 808 h, functionality: fully functional, working width: 650 mm, area performance: 3,500 m²/h, overall weight: 447 kg, warranty duration: 12 months, water tank capacity: 75 l, HAKO SCRUBMASTER B75 R TB650 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2015 with 808 hours of operation 650mm cleaning head (TB650) equipped with new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. A new rubber guard around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Hnedpfsy Uhhxox Ab Ijt Power supply voltage: 24 V Brush working width (mm): 650 Suction nozzle working width (mm): 860 Working speed (km/h): 5.5 Tank capacity (l): 75/75 Number of brushes (pcs): 2 Brush speed (rpm): 180 Efficiency (m²/h): 3500 Gradeability (%): 10 Weight (kg) 447 W INCLUDED IN THE KIT: NEW 6V 175Ah SIAP GEL BATTERIES (4x) NEW 24V 600W suction turbine NEW 330mm PPL 0.5 disc brushes (2x) NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 75-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. Its small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (650 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: used, functionality: fully functional, power: 400 kW (543.85 HP), Becker Type 48/50 Shredder – 400 kW incl. Drive and Voith Turbo Coupling For sale is a Becker Type 48/50 shredder with a 400 kW drive. The machine was used for the processing and shredding of electric motors, electronic waste and cables and is particularly suitable for electrical and metal-containing materials. Extensively refurbished: * All plates and wear plates replaced * Rotor completely renewed Hnsdpfx Ajzygghob Iet * Rotor cutters replaced * Apron conveyor completely overhauled * Wear parts on the apron conveyor replaced * Voith turbo coupling overhauled * Drive completely overhauled * New motor mounting plate * New discharge chute made of stainless steel * New discharge hopper * New cast grates Scope of delivery: Becker Type 48/50 shredder, 400 kW drive, overhauled Voith turbo coupling with overload protection, new motor mounting plate, new stainless steel discharge chute, new discharge hopper, new cast grates, and a spare parts package including a used spare rotor. Following the extensive refurbishment, the machine is in very good and operational condition. An on-site inspection is recommended. Further technical data and documentation are available upon request. Price: upon request

Condition: reconditioned (used), Year of construction: 2016, operating hours: 834 h, functionality: fully functional, working width: 650 mm, area performance: 3,500 m²/h, overall weight: 447 kg, warranty duration: 12 months, water tank capacity: 75 l, HAKO SCRUBMASTER B75 R TB650 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2016 with 834 hours of operation 650mm cleaning head (TB650) equipped with new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. A new rubber guard around the brush head prevents water from splashing outside the machine's outline. Hnodpfx Aoza Sulob Iet The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 650 Suction nozzle working width (mm): 860 Working speed (km/h): 5.5 Tank capacity (l): 75/75 Number of brushes (pcs): 2 Brush speed (rpm): 180 Efficiency (m²/h): 3500 Gradeability (%): 10 Weight (kg) 447 W INCLUDED IN THE KIT: NEW 6V 175Ah SIAP GEL BATTERIES (4x) NEW 24V 600W suction turbine NEW 330mm PPL 0.5 disc brushes (2x) NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 75-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. Its small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (650 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 721 h, functionality: fully functional, working width: 750 mm, area performance: 4,800 m²/h, overall weight: 716 kg, warranty duration: 12 months, water tank capacity: 116 l, HAKO SCRUBMASTER B115 R TB750 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2015 with 721 hours of operation. 750mm cleaning head (TB750) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 750 Suction width (mm): 950 Theoretical capacity (m²/h): 4800 Clean/dirty water tank capacity (l): 116/116 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready to use (kg): 716 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine NEW 380mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose NEW head guard rubbers (x2) Built-in battery charger Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE Hedpfxsywk Uaj Ab Ient KEY FEATURES: The 116-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (750mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: M 09074, overall weight: 950 kg, power: 8 kW (10.88 HP), input voltage: 400 V, Technical Specifications: Manual Adjustment: 400mm manual adjustment Automatic Broaching Stroke: 250mm, automatic stroke Keyway Widths: 2 to 32mm Workpiece Diameter: 620mm Maximum Thrust Force: 20kN fixed value Cutting Speed: 15 m/min, infinitely variable Dimensions (W x D x H): 1000 x 1200 x 2440mm Net Weight: approx. 950kg Electrical Connection: 3 x 400 VAC, 50/60 Hz, 8kW Hsdpfeyazc Sjx Ab Ijnt Pneumatic Connection: not required Colour: Blue RAL 5001, Grey RAL 7035 For further details, please see the PDF description in the attachment.

Condition: used, functionality: fully functional, USED UNIVERSAL MILLING MACHINE WITH 200 MM SPINDLE, NOT 'CE', ISO 50, STANITALIANA. Weight 4000 kg Hnsdpfx Abjzhkvcs Iot

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Torque: 1,100 Nm Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Hodpfx Aszu Ixnsb Ijnt Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Condition: reconditioned (used), Year of construction: 2020, operating hours: 257 h, functionality: fully functional, working width: 650 mm, area performance: 2,900 m²/h, overall weight: 237 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 CL TB650 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2020 with 257 hours of operation 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for work on any surface New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 650 Suction nozzle working width (mm): 950 Theoretical capacity (m²): 2900 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~237 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 330mm PPL 0.5 disc brushes (2x) NEW 24V 400W suction turbine NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal solution - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. Hjdpfx Aboywli Eo Isnt The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (650mm) ensures high surface coverage. The control panel is very clear and intuitive.