Used Muhr + Bender Kbl 16 Optima for sale (13,471)

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 21,319 h, load capacity: 1,600 kg, lifting height: 2,800 mm, free lift: 1,300 mm, fuel type: electric, mast type: duplex, construction height: 1,870 mm, fork carriage width: 1,030 mm, fork length: 1,100 mm, empty load weight: 2,972 kg, total length: 1,950 mm, drive type: Elektro, construction width: 1,080 mm, Electric 3-Wheel Forklift Load Center: 500 Fork Width: 100 mm Fork Thickness: 35 mm Mast Type: Duplex Fedpfx Aewbav Isdrjpk Condition: Ready for use and fully functional Technical Condition: Very good Front Tires Type: Super Elastic Front Tire Size: 18x7-8 Rear Tires Type: Super Elastic Rear Tire Size: 15x4.5-8 Battery Voltage: 48V Battery Ah: 720Ah Battery Year of Manufacture: 2015 Sideshift, Full Free Lift,

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Fjdpfx Asztp S Hedropk Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 400 kg, total length: 1,800 mm, total width: 700 mm, total height: 1,700 mm, power: 15 kW (20.39 HP), operating pressure: 16 bar, pressure (min.): 6 bar, pressure (max.): 16 bar, noise level: 62 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 15 kW / 16 bar (also available with 22 kW) Complete 4-in-1 unit Frequency-controlled servo motor 500-liter pressure tank Refrigerant dryer Fine filter New machine, delivery time approximately 1 week We would be happy to demonstrate the machine to you at our facility. Highly efficient, permanently excited servo motor Frequency-controlled / load-dependent For clean and dry compressed air Suitable for laser applications With animated color display Single-stage screw unit Air-cooled Fjdpfx Asyll Enedrjpk Durable and low-maintenance Optional: also available with an additional adsorption dryer Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria Technical data (approx.): Length: 1.75 m, Height: 1.75 m, Width: 0.72 m Weight: approx. 420 kg Pressure: 16 bar Flow rate: approx. 1.7 m³/min at 10 bar (1.2 m³/min at 16 bar) Noise level: 62 ± 2 dB(A)

Condition: good (used), Drill chuck, chuck, quick-release drill chuck -Manufacturer: Röhm / unknown, drill chuck quick-release drill chuck Fpodpjzp Hnwjfx Adrok -Röhm: Type Spiro clamping range: 1-13 mm / B16 -Drill chuck: unknown clamping range 3-16 mm -Submission/Price: complete -Transport dimensions: 200/100/H50 mm -Weight: 2.2 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, soft Fpjdpfx Ajzp Eh Ajdrjk -Jaw width: 16 mm -Dimensions: see photo technical drawing -Overall dimensions: 55/50/H40 mm -Total weight: 0.7 kg

Condition: good (used), Oil-water separator with pre-separation Tank volume (liters) 228.4 Compressor capacity, max. m³/min 58.5 Condensate inlet connection 3 x G1/2, 1 x G1 Fpjdpfx Aog Db R Ajdrjk Filling volume in liters 158.8 Filter capacity in liters 1 x 37.2 / 1 x 40.3

Year of construction: 2008, condition: good (used), Freeze Dryer Kaeser TE 141 SECOTEC® Serie for compressed air systems Technical specification: Flow rate: 14,3 m3/min Fjdpfx Adog A D Euerepk Gauge pressure aiir system: 3-16 bar Power consumption: 1,6 kW (at 100% flow) 0,88 kW )at 50% flow) Power supply: 400 V, 50 Hz, 3 Ph Rated current: 4,6 A Dimension (W x D x H) : 1060 x 1520 x 1513 Weight: 660 kg

Condition: excellent (used), Year of construction: 2007, Build in 2007 Pressure max 16 bar Fpsdpeg Dctyofx Adrek Desiccant dryer, heatless regenerated

Condition: good (used), Year of construction: 1993, Year of manufacture 1993 Size max. 450 x 340 mm min. 140 x 100 mm Product thickness max. 70 mm min. 3 mm Inlet height max. 890 mm min. 800 mm Conveying head 850 mm Speed max. 18,000 c/h Fpedpfsu R U Ddex Adrsk Power requirement 1.35 kW (220/380V, 50Hz) Length 2,208 mm Width 1,500 mm Height 1,700 mm Weight approx. 1,000 kg

Year of construction: 1997, condition: good (used), Built in 1997 Size: max 450 x 340 mm, min 140 x 100 mm Product thickness: max 70 mm, min 3 mm Infeed height: max 890 mm, min 800 mm Delivery height: 850 mm Speed: max 18.000 c/h Power requirements 1,35 kW (220/380V, 50Hz) Length 2.208 mm Width 1.500 mm Fpjdpfx Adjg Duz Esrek Height 1.700 mm Weight 1.000 kg (approx.)

Condition: excellent (used), Year of construction: 2000, x-travel 3000 mm Fodpfx Adoxb Eg Njropk y-travel 1400 mm z-travel 1600 mm control DEA B3C-LC workpiece weight 4500 kg table surface area 4730 x 1465 mm tool taper RENISHAW PH10M weight of the machine ca. 4 t dimensions of the machine ca. 4 x 3,8 x 3 m

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Fsdjxdi Agspfx Adrspk

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chucks, 4 sets Fpedpfx Aezpw H Dedrsk -Jaw width: 16 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 41/48/H33 mm -Weight/set: 1.6 kg

Condition: used, Year of construction: 2006, Measurement range width/length/height: 1600/1800/1000 mm Dimensions width/length/height: 2450/2940/3800 mm Maximum workpiece weight: 3500 kg Measurement machine weight: 8500 kg Creep feed: 0 - 5 mm/s Setup operation: 0 - 70 mm/s Series measurement operation Axis: max. 300 mm/s Vector: max. 425 mm/s Fjdpfxjzn Iucs Adrspk Software version: Calybso 2023/ Service Pack 2 – Version 7.6.08 Various measuring probes Measuring head

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, pressing force: 16 t, total width: 700 mm, center height: 1,050 mm, working height: 1,050 mm, Automatic straightening system, mechanically overhauled, fitted with new SIMATIC S7-1500 control and Drive Controller CPU 1504D TF. Max. centre distance 500 mm, straightening force 16 t, straightening stroke 20 mm, idle stroke 95 mm, working height 1050 mm, power rating 10 kVA, average consumption 1.3 kW. Option: The machine can be equipped with a lifting beam conveyor (through the machine), as well as infeed/outfeed belts according to customer requirements, and also with a safety fence. Currently, the machine is equipped with 1 straightening station; expansion is possible. Fsdpoxldiqjfx Adropk

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,921 h, load capacity: 1,600 kg, lifting height: 4,920 mm, free lift: 1,562 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Fedpfxozt Dtrs Adrepk Mast type: Triplex Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 48V Battery capacity: 625Ah Battery type: PzS Battery year of manufacture: 2017 Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light.

Condition: used, Year of construction: 2015, operating hours: 600 h, load capacity: 1,600 kg, lifting height: 220 mm, fuel type: electric, construction height: 1,250 mm, gearing type: automatic, overall weight: 430 kg, empty load weight: 289 kg, total length: 1,660 mm, color: silver, mileage: 600 km, first registration: 08/2015, suspension: other, number of seats: 1, driver cabin: other, wheelbase: 1,304 mm, emission class: none, fuel: electricity, Battery deeply discharged! Are you looking for an efficient and reliable solution for the daily transport of pallets in warehouses, logistics operations, or production facilities? Then this Still EXU 16 is exactly the right piece of equipment for you. This electric low-lift pallet truck impresses with its simple, intuitive operation and its high reliability in daily use. Thanks to the automatic system, the device can be controlled particularly comfortably, which makes work processes faster, safer, and significantly more ergonomic. With only 600 operating hours and initial registration in August 2015, this device is in very good, lightly used condition and is ready for immediate use. The lifting capacity of 1,600 kg enables the safe transport of heavy loads, while the lifting height of 215 mm is optimally designed for conventional pallet handling. The Still EXU 16 is compactly designed and therefore ideal for narrow warehouse aisles or confined working areas. At the same time, the Still brand has stood for high-quality intralogistics technology for decades, which is characterized by durability, safety, and low maintenance costs. If you want to make your internal transport processes more efficient and at the same time rely on proven quality, this Still EXU 16 is the ideal choice. A reliable helper that will noticeably simplify your daily work and ensure a smooth flow of materials – day after day. For sale only to businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted. Fpedpfxezt Abbe Adrok

Condition: new, maximum load weight: 30,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, Year of construction: 2026, Equipment: ABS, 3-axle timber transport semi-trailer * 8x OptiPa bolster beams * 16x OptiPa aluminum side posts, one-piece * Sturdy aluminum front bulkhead, approx. 2500 mm high * Maximum saddle load approx. 12,000 kg * Front overhang (kingpin to front edge of the kingpin plate) 1550 mm * Air suspension with 3x 9-ton axles from SAF * Axle reinforcement for off-road use * Axle lift for the first axle, automatic function, with start-up assistance * Weighbridge * Technically possible total weight 39,000 kg * WABCO Smart-Board * EBS braking system * All lines are protected and routed inside the longitudinal beams * Smooth sheet metal covering 3 mm, welded between the longitudinal beams * Tires: 6x brand-name tires, size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and position lights * Plastic mudguards, 180 degrees, above each axle * Underrun protection made of round tubes, mounted as high as permissible * Shunting coupling at the rear * Ten welded ring elements for lashing, per side * 2x toolboxes approx. 600x400x400, plastic * Side impact protection, aluminum, anodized * KTL coating with zinc phosphating, highest level of corrosion protection Fpodpfx Asi Rtgqjdrok Also available for short-term rental. Further information upon request.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control Fodpfx Adoztpw Nsropk - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,150 mm, total width: 900 mm, total height: 1,910 mm, OPEN 16T ECCENTRIC PRESS – THE MACHINE HAS MINOR DAMAGE AS SHOWN IN THE PHOTOS: THE ELECTRICAL CONTROL CABINET AND THE OIL DRIP TRAY ARE DENTED. Professional 16-ton eccentric press designed for punching, stamping, bending and forming metal components. The open back frame construction provides easy access to the working area and comfortable machine operation. The rigid and durable construction ensures stable operation even during intensive industrial use. The machine is equipped with a dry pneumatic friction clutch and modern safety systems. Main machine features: • Open back frame design • Rigid and durable construction • Fixed working table • Transversely mounted crankshaft • Horizontally mounted crankshaft • Dry pneumatic friction clutch • Lifting balance device • Safety valves • Manual control • High production efficiency TECHNICAL SPECIFICATIONS: • Pressing force: 16 t • Stroke under load: 2 mm • Slide stroke: 0–70 mm • Number of strokes: 125 strokes/min • Maximum die height: 170 mm • Distance from slide block to frame: 170 mm • Working table dimensions: 320 × 480 mm • Table hole diameter: Ø100 mm • Opening dimensions: 160 × 240 × Ø210 mm • Slide dimensions: 180 × 200 mm Fpodpfx Adszp I Tzjrok • Shank hole size: Ø40 × 60 mm • Distance between columns: 220 mm • Table thickness: 60 mm • Maximum tilt angle: 25° • Motor power: 1.5 kW • Machine dimensions: 1150 × 900 × 1910 mm • Weight: 1400 kg Equipment: • Light curtains • Mechanical guards • Ejector in lower table Delivery conditions: • Delivery to customer possible • Shipping cost calculated individually • Brand new machine • 12-month warranty • Warranty and after-sales service • CE declaration of conformity Additional delivery information: • Delivery can be arranged throughout Europe • Shipping cost calculated individually depending on customer location • Fast order processing • Personal collection possible • Machine professionally secured for transport

Condition: good (used), functionality: fully functional, machine/vehicle number: WJMBB0A8M04010094, mileage: 24,500 km, overall weight: 7,500 kg, axle configuration: 4x4, color: red, Year of construction: 1995, Sales Description – Iveco Magirus 80.16 4x4 Firefighting Demonstrator Vehicle We are offering for sale our seldom-used IVECO Magirus 80.16 4x4 demonstrator vehicle, which was custom-built in 2013 together with Jacinto (Portugal) for demonstration purposes. The vehicle is based on a robust chassis from 03/1985 with just 24,xxx km mileage. The superstructure, including the fire centrifugal pump, was newly manufactured in 2013. The pump has only 34 operating hours. This fire engine is fully equipped and comes with a complete inventory. In addition, it features a fully automatic light mast and an 8.5 t front winch. Fpsdpjx Uy Rljfx Adrok Vehicle details: Model: Iveco Magirus 80.16 4x4 Chassis Year: 1985 Superstructure: 2013, Jacinto (Portugal) Mileage: approx. 24,000 km Centrifugal Pump Operating Hours: 34 h Equipment: Front winch (8.5 t), automatic light mast, full loading/inventory Equipment by locker (stowage compartment): Front left locker: Bolt cutter 2x Dräger breathing apparatus Hydraulic rescue spreader Hydraulic rescue cutter Power unit for rescue tools Projector Tarpaulin Fire extinguisher Hose cassette Middle left locker: Fireco high-pressure pump (water/foam) High-pressure lance Various hose management accessories Rear left locker: Connection high-pressure pump to hose reel Various hose management accessories Outlet: 1x water / 1x foam Rear locker: Pump control station Light mast controls 1x suction inlet 1x water supply 1x "emergency exit" water outlet 1x rapid attack hose reel Rear right locker: Supply/transport hoses Pressure hoses "Lifeline" 1x pressure relief valve Outlet: 1x water / 1x foam Middle right locker: Backup generator (for light mast) 5x traffic cones 1x water curtain 1x suction strainer incl. rope 1x first aid kit 1x canister Front right locker: Petrol-driven fan Foam branchpipe Hose bridges Hooligan tool Chainsaw Hose section Various equipment Right underfloor compartment: 5x warning lights Diesel tank Left underfloor compartment: Batteries 1x wedge Pneumatics Remarks: The vehicle has been used exclusively for demonstration purposes. It is technically in excellent condition, but both the chassis and body do not comply with the latest standards for new acquisitions—which is the reason for this sale. Ideal for fire brigades with a limited budget or for export.

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: Bottom & end face - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Opening: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW Fsdszn Ah Repfx Adropk - Extraction diameter: 120 mm - Includes a wide range of stops (see pictures) Availability: at short notice Storage location: 63934 Röllbach

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2006, next inspection (TÜV): 08/2027, total length: 13,600 mm, total width: 2,550 mm, Equipment: ABS, DOLL long timber transporter!! BPW axles 16 stakes New TÜV (technical inspection) valid until 08/2027 Air suspension Lift axle Aluminum rims Drum brakes Tires with approximately 50-60% tread remaining Fpodezt D Ebspfx Adrek etc.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 2,576 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,250 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: very good Front tyres type: Superelastic Front tyres condition: 80 - 100% Rear tyres type: Superelastic Fedeyyrp Djpfx Adropk Rear tyres condition: 80 - 100% Description: Workshop-inspected, new UVV & inspection, new paintwork Sideshift, 3rd valve, 4th valve, rear work light, front work light, heating, STVZO, full cab, pulse control, full free lift, CE certificate, Safety Light,

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,798 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,250 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift truck ISO class: ISO class 2 = 1,000 - 2,500 kg Fpsdpfx Adoyyrp Rjrjk Mast type: Triplex Technical condition: very good Front tyre type: superelastic Front tyre condition: 80 - 100% Rear tyre type: superelastic Rear tyre condition: 80 - 100% Description: Workshop-inspected, new UVV & service inspection, newly painted Sideshift, 3rd valve, rear work lights, front work lights, roof cover, front windscreen, full free lift, CE certificate, safety light.