Used Netzsch 40 Platten for sale (21,709)

Condition: excellent (used), Binder Temperature Test Chamber Type: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber for professional heat and cold tests in industry, research, development, and quality assurance. The Binder MK series temperature test chambers are particularly suitable for cyclic temperature tests and reproducible tests under defined environmental conditions. The test chamber enables temperature tests in the range of -40 °C to +180 °C and represents an efficient alternative to individual custom solutions. Technical data: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K (depending on the setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on the setpoint) Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Equipment: 2 x feedthrough Ø 70 mm 1 door 2 shelves standard / max. 6 shelves possible Electrical data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse rating: 16 A Phases: 3~ Weight: approx. 320 kg For your safety as a buyer: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: Used Optical condition according to pictures Normal storage and signs of wear present Important note: All information has been compiled to the best of our knowledge based on the pictures, nameplates and manufacturer information. Shipping possible. Changes, errors and prior sale reserved. Hfsdpfx Ajy Nic Hef Ejh We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2021, load capacity: 4,000 kg, lifting height: 4,400 mm, total length: 4,000 mm, - Geschwindigkeit mit/ohne Last 24 km/h - Kabinendach aus Kunststoff, Heizung - Ventile 3 - Nenntragfähigkeit/Nennlast 5000 kg - Lastschwerpunktabstand 500 mm - Lastabstand 567 mm Hsdsy E Uf Sspfx Af Esfh - Achslast beladen kg 10780/1360 - Achslast unbeladen kg 3300/4060 - Spurweite mm 1180 - Spurweite mm 1190 - Neigung Mast/Gabelträger α/β ° 6/12 - Sitzhöhe bezogen auf SIP/Ständerhöhe mm 1315 - Kupplungshöhe mm 380 - Gangbreite für Paletten 1000 x 1200 quer Ast mm 4597 - Gangbreite für Paletten 800 x 1200 längs Ast mm 4797 - Wenderadius mm 2830 - Kleinster Drehpunktabstand mm 900 - Fahrgeschwindigkeit beladen/unbeladen Km/h 22/24 - Hubgeschwindigkeit beladen/unbeladen m/s 0.45/0.49 - Senkgeschwindigkeit beladen/unbeladen m/s 0.38/0.26 - Zugkraft beladen/unbeladen kN 28/21 - Steigfähigkeit beladen/unbeladen % 20/20 - Betriebsbremse Mechanisch/Hydraulisch - Nenndrehzahl l/min 2200 - Zylinderzahl 4 - Kapazität cm3 2482 - Emissionsgrad gem. gemäß EU-Verordnung 2016/1628 Stage III a - Bordnetzspannung V 12 - Art der Antriebseinheit Drehmomentwandler - Betriebsdruck für Anbaugeräte bar 200 - Ölmenge für Anbaugeräte L/min 101 - Kraftstofftank, Inhalt 90 - Anhängekupplung Typ DIN 15170 Bolzen

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 4,700 kg, total width: 2,400 mm, total length: 6,100 mm, total height: 2,550 mm, type of input current: three-phase, input voltage: 400 V, warranty duration: 6 months, tank capacity: 800 l, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, hot water, type plate available, We offer a fully equipped, modular pellet boiler house with a 40 kW capacity, built in an ISO sea container and ready for immediate operation. The boiler house has been used as an exhibition sample and for demonstration purposes, and is therefore in very good technical and visual condition. The module is suitable for heating residential buildings, offices, workshops, warehouses, construction sites, agricultural facilities, and other buildings. It can be used as a permanent or temporary heating solution, as well as a backup boiler house for emergency situations. Included: * DEFRO pellet heating boiler with automatic pellet feeding * Nominal power: 40 kW * DEFRO storage tank – 800 l * Kospel hot water boiler – 140 l * Expansion tank * Circulation pumps * Automation and control system * Electrical distribution panel * Flue gas exhaust system * Natural ventilation * Gas extinguishing system for added safety Technical data: Hodpfx Afozdc Tgo Esfh * Container dimensions: 6100 × 2400 × 2550 mm * Total weight: approximately 4700 kg * Power supply: 3N+PE 230/400 V * Frequency: 50 Hz * Power consumption: approximately 5 kW * CE compliance * TÜV NORD conformity assessment The current system configuration allows for increasing the heating capacity in the future, as the installed components are suitable for operation with a higher-capacity boiler. The boiler house is easily transportable and can be quickly installed on-site. Only the connections need to be prepared, and the system is ready to operate. The boiler house is equipped with an automatic gas fire extinguishing system, which provides additional protection for electrical and technological equipment. The system is in working order and ready for use. Upon agreement, it can be dismantled before sale, which would reduce the price accordingly. Available for inspection in Riga by prior arrangement.

Condition: used, Demag plasticising unit IU mm - removed from Demag Ergotech system 200-560-320 - removed from running machine - fully functional - displacement: 231 cm³ - injection pressure: 1855 bar - moulded part weight max. PS: 210 g - cylinder E: .01 mm, A: .01 mm   - screw E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø - 06--DEM-001 Hedpfx Aoh Nv Itjf Esfh - year of manufacture 2005 - also suitable for IU320 and IU610 - nut and coupling must be exchanged manufacturer: Demag Dition: gebraucht

Condition: good (used), 1 used mold measuring station made by Perthen type MMQ40 Ser. no. 1114, Up to diameter 350 mm Hedothdkwspfx Af Eefh Workpiece length up to 450 mm For high-precision measurement of shape and position tolerances with PC, TFT monitor, keyboard, mouse, table, measuring software, form PC Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data!)

Condition: not inspected (used), Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- INCLUDES extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg Hedpfx Aoy Hl Iyof Ejfh - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, machine/vehicle number: M338, Used Crown Bevcorp 40 valve filling monoblockTechnical Specifications & Performance DataThis used can filling monoblock combines a Bevcorp UB40 rotary can filler with an Angelus 61H seamer, delivering dependable performance for industrial packaging and beverage production. The system is configured for aluminum cans and is supplied with tooling for multiple can body styles. It is an excellent option for a second hand solution within a used bottling line where reliability and ease of integration are essential.Filler model: UB40 rotary can fillerFiller valves: 40Seamer model: 61HOverhauled in 2019Containers: Aluminum cans (standard and sleek)Ends: 202 can endsSpeed: 20.000 BPHConfigured can sizes: 12 oz (approx. 0.355L) and 16 oz (approx. 0.473L)Included components: Can transfer conveyor, electrical panel, lubrication panel system, stainless steel mechanical safety guarding, handling parts, operator manualElectrical: 480 V, 3 Ph, 60 HzNitrogen dosing: Vacuum barrier nitrogen dosing systemCondition: Used – good; regularly maintainedAdvanced Automation & Control SystemsThe monoblock includes an integrated electrical panel to manage coordinated operation of the filler and seamer. Safety interlocks and stainless steel safety guarding support operator protection during beverage production. Variable speed drive elements are supported by a dedicated lubrication approach for reliable operation under continuous duty. Quick access to guarding and panels facilitates routine adjustments and preventive maintenance in industrial packaging environments.Production Line Integration CapabilitiesDesigned to operate inline with upstream and downstream equipment, this filler–seamer block integrates smoothly into a used bottling line or a new beverage production layout. The included can transfer conveyor simplifies synchronization between the 40-valve filler and the 61H seamer. Existing handling parts and tooling accommodate both standard and sleek aluminum cans with 202 ends, supporting efficient format changes between 12 oz and 16 oz. The monoblock can operate as part of a complete packaging machinery setup alongside depalletizing, rinsing, coding, and case packing systems.Machine Condition & Maintenance HistoryThe equipment is described as used – good and has been regularly maintained. Mechanical safety guarding, lubrication panel, and operator manual are included, indicating a machine that has been cared for and kept in service-ready condition. This makes it a strong second hand choice for plants seeking to expand or refresh beverage production capacity with minimal downtime.Operational Performance & VersatilityEngineered for flexibility, the monoblock is capable of running carbonated and non-carbonated beverages. The 40-valve filler supports steady throughput and consistent fill accuracy, while the Angelus 61H seamer is recognized for robust end application and seam integrity. The vacuum barrier nitrogen dosing system enhances product quali... Hodozcf Idopfx Af Eofh

Condition: good (used), Year of construction: 2017, functionality: fully functional, Baler Presto CC 40 M, Year of manufacture: 2017 Technical Specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Binding: 4-fold, polyester strapping, manual Throughput rate at bulk density of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale size: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Operating instructions and CE declaration are available. Note: Channel discharge is fully automatic and regulated. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Hfsdpfx Aezc Hy Uef Esh Inspections are possible by appointment. Sale is ex-works, prepayment required, without warranty or guarantee.

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: 0372PO183, Manufacturer: JBT - Stein Model: JSO-IV-40-22TF Year: 2006 Condition: Used Serial Number: 0372PO183 Stock Number: 1180G Hedpey Icgiofx Af Esfh Belt width: 40 inch, 1010 mm Heating: thermal fluid, 2 x 460kW Steam: max 2 x 545 kg/hr Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 63kW Dimensions: 22500 x 3000 x 3000 mm

Condition: used, maximum load weight: 28,560 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 03/2026, loading space length: 12,032 mm, loading space width: 2,352 mm, loading space height: 2,698 mm, loading space volume: 68 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, FLIEGL 3-axle container chassis rigid with 40 FT Highcube container First registered in 2023 Total weight (technical) 38,000 kg Empty weight of chassis 3,640 kg Hjdsvzk Naspfx Af Eofh Empty weight of HighCube container 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE, with starting aid with vehicle driving stability system Axle load detection Tires 6-fold 385/55 R 22.5 40 FT Highcube container right side wall can be opened as doors (multiple wings), door dimensions L 2,340 x W 2,585 mm Portal doors at the rear Dimensions i.L. (LxWxH) 12,032 x 2,352 x 2,698 mm Volume 68 cbm 25 Euro pallets Accessible with pallet truck and forklift 1-A condition RENT is the new BUYING, also available from us as a full-service rental-----

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Mettler Toledo ICS469-40 Checkweigher, 40 kg Conveyor Belt Scale for conveyor systems Manufacturer: Mettler Toledo Type: ICS469-40 Year of manufacture: 2024 Load cell type: LB60 Weighing range: 0 g to 40 kg Accuracy: ± 5 g Throughput: 100 measurements/min Radius between rollers (A-A): 600 mm Hedszdrgbepfx Af Ejfh Belt width: 400 mm Height: 500–800 mm

Condition: excellent (used), Carousel Milling Machine RYE 40 SM SPEEDMAX Number of units: 3 Unit configuration: Hjdpfx Afexf Iuds Eofh Milling machine Milling machine Grinding machine Pneumatic central material pressure

Condition: used, Year of construction: 2003, Technical details: x-travel: 2300 mm y-travel: 1200 mm z-travel: 600 mm turning speeds: 30-10.000 1/min max. torque on the spindle: 254 / 159 Nm control: HEIDENHAIN TNC 430 tool taper: SK 40 tool change unit: 60 Pos. spindle: 40 / 25 kW fixed working table:surface area: 1.100 x 1.100 mm rotary table: 1.100 x 1.100 mm rapid traverse: 30 m/min total power requirement: 69 kVA weight of the machine ca.: 20 t universal machining center with indexing head (2,5°), NC-rotary table, max. table load 1.500kg, internal coolant supply 30 bar, paper filter, el. handwheel, chipconveyor, automatic doors, flush gun, Hfodpfx Afjwltwms Eoh no touch probe available, approx. 81.400 h main swich on approx. 72.200 h control on approx. 26.700 h program running on machine under power , for functional testing *

Year of construction: 1997, condition: used, functionality: fully functional, load capacity: 45,000 kg, 20/40‘ Hydraulic Spreader Condition: Ready for use and fully functional Technical Condition: very good Hodpswpm E Sefx Af Eofh Description: In addition to this ELME model, we have about 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Hire purchase & financing on favorable terms are always possible for us. We are also happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this CH 20-40. P.S.: Our master forklift workshop specializes in repair, restoration, overhaul, and custom-built forklifts from 8 tons upwards. We are also happy to put your vehicle on sale for you on commission at our place.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 9,220 h, load capacity: 4,000 kg, lifting height: 4,020 mm, fuel type: diesel, mast type: simplex, construction height: 2,700 mm, fork carriage width: 1,430 mm, fork length: 1,380 mm, empty load weight: 7,380 kg, total length: 4,540 mm, drive type: Diesel, construction width: 2,170 mm, Sideloader Load center of gravity: 700 Fork width: 200 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 250/75-12 Rear tires type: Pneumatic Rear tires size: 250/75-12 Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQN 40/14/40. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and over. We would be happy to display your vehicle for consignment sale. Heating, full cab, Hodpfxsvlp Dqs Af Eofh Platform height: 870 mm

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 5,915 h, load capacity: 6,000 kg, lifting height: 4,020 mm, fuel type: diesel, mast type: simplex, construction height: 2,880 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 9,690 kg, total length: 4,950 mm, drive type: Diesel, construction width: 2,230 mm, Side loader Load centre of gravity: 700 Fork width: 180 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tires type: pneumatic Front tires size: 3.00-15 Rear tires type: pneumatic Rear tires size: 3.00-15 Hodpfx Afsu Rgqie Ejfh Description: In addition to this Jumbo model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this JDQ60/14/40 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Fork positioner, Heating, full cabin, Platform height: 1050 mm

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 10,194 h, load capacity: 7,000 kg, lifting height: 4,000 mm, free lift: 325 mm, fuel type: diesel, mast type: simplex, construction height: 2,900 mm, fork carriage width: 1,450 mm, empty load weight: 9,840 kg, total length: 4,800 mm, drive type: Diesel, construction width: 2,200 mm, Sideloader Load center of gravity: 700 Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Hfodpfx Afjwacbds Eoh Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 3.00-15 Description: In addition to this Jumbo model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle, even without purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this J/SH70/14/40. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We'd be happy to display your vehicle for consignment sale. Heating, full cab, Platform height: 1030 mm

Condition: used, functionality: fully functional, Year of construction: 1997, operating hours: 7,809 h, load capacity: 5,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 2,910 mm, fork carriage width: 1,490 mm, fork length: 1,400 mm, empty load weight: 8,450 kg, total length: 5,100 mm, drive type: Diesel, construction width: 2,200 mm, Sideloader Load center of gravity: 700 Fork width: 200 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 3.00-15 Rear tires type: Pneumatic Rear tires size: 3.00-15 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle over the counter, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this GX50/14/40. P.S.: Our forklift workshop specializes in repairs, overhauls, and custom builds for forklifts weighing 8 tons and over. We're happy to display your vehicle for consignment sale. Heating, full cab, Platform height: 1060 mm Hedpfx Asv U Eyaof Esfh

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 14,121 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 550 mm, fuel type: diesel, mast type: simplex, construction height: 2,800 mm, fork carriage width: 1,300 mm, fork length: 1,400 mm, empty load weight: 8,050 kg, total length: 4,680 mm, drive type: Diesel, construction width: 2,150 mm, Sideloader Load center of gravity: 700 Fork width: 200 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 8.25-15 Rear tires type: Pneumatic Rear tires size: 8.25-15 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle over the counter, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this DX50/14/40. P.S.: Our forklift workshop specializes in repairs, overhauls, and custom builds for forklifts weighing 8 tons and over. We would be happy to display your vehicle for consignment sale. Hfjdpfx Afsv U Eqfj Eoh Nivo Fork Platform height: 1050 mm

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 8028-18, overall weight: 550 kg, total length: 1,300 mm, total width: 950 mm, total height: 1,360 mm, space requirement length: 1,800 mm, space requirement width: 1,500 mm, space requirement height: 2,500 mm, motor manufacturer: PM Synchronous Motor, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 258 m³/h, operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 45 °C, noise level: 70 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, AIRPRESS Industrial Compressed Air System for Sale Professional industrial compressed air system for sale, suitable for metal fabrication, CNC machining, laser cutting, woodworking, painting, manufacturing facilities, and other industrial applications. The system is designed as a ring-main compressed air network, ensuring stable pressure and maximum airflow at every workstation. Hodpfx Afozdcdxj Ejfh Included Equipment: AIRPRESS APS 40 IVR X Screw Compressor Power: 30 kW (40 HP) Variable Speed Drive (IVR) Maximum pressure: 10 bar Air delivery: up to 4,300 l/min Direct drive 1:1 transmission PM Synchronous Motor Noise level: only 70 dB(A) Air connection: 1¼" Power supply: 400V / 50Hz / 3 Phase Weight: 550 kg Dimensions: 1300 × 950 × 1360 mm Vertical Air Receiver Tank Capacity: 1,000 liters Height: 2,250 mm Weight: 280 kg AIRPRESS APX-52 Refrigeration Air Dryer Capacity: 5,200 l/min Dimensions: 460 × 560 × 789 mm Weight: 65 kg Cyclone Water Separator Connection: 1" Capacity: 6,085 l/min Compressed Air Distribution System Ring Main Air Network Total perimeter length: 172 m 32 mm aluminum piping Additional 25 mm and 32 mm branch lines 10 filtration and regulation (FR) stations 9 workstation drop points 2 quick-connect outlets per FR station Adjustable pressure regulation at each workstation Advantages: Energy-efficient variable speed drive technology Stable air pressure throughout the system Low operating noise Suitable for continuous 24/7 industrial operation High-quality European-made aluminum piping Corrosion-free air distribution network Easy to dismantle, relocate, and expand No welding or soldering required AIRPRESS 10-year warranty on the air distribution system Professional industrial-grade installation Original Investment Value: Item / Value (Excl. VAT) AIRPRESS APS 40 IVR X Compressor / €9,560 1,000 L Air Receiver / €1,165 APX-52 Air Dryer / €1,920 Cyclone Separator / €162 Ring Main Air System with Installation / €6,995 Connection Materials / €400 Total Original Value / €20,202 Equivalent to approximately €24,445 including VAT. Applications: Suitable for: CNC machining centers Laser cutting machines Metal fabrication workshops Welding facilities Powder coating and painting operations Woodworking factories Automotive workshops Manufacturing plants The system provides clean, dry, and stable compressed air for demanding industrial applications. Condition: Excellent and NEW. Location: Lithuania Price: €11,900 + VAT Inspection available by appointment. Loading assistance can be arranged.

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm Hfedpfxjyfgzdo Af Esh OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc OF0435 Hardware dongle for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Condition: excellent (used), Measuring gauge Manufacturer: Micro-Maag Model: B2 40-100 Stock number: (28690) Measuring range: 40 - 100 mm in 2 mm steps per test gauge Hodpjy Ipbmsfx Af Esfh 1 test gauge DM 74-76 mm is missing Very precise measurements possible, as measurement is taken at 6 points. Measuring depth approx. 800 mm Transport case dimensions: Width: 505 mm Depth: 340 mm Height: 260 mm Weight: 29 kg

Condition: used, Used 40HC sea containers are available throughout Germany. Prices vary depending on the location. CONTAINER TYPE: Sea container 40HC DELIVERY CONDITION: Used, wind and watertight, cargo worthy, wooden floor, example images DIMENSIONS L x W x H: According to ISO standard, external dimensions: 12,192 x 2,438 x 2,896 mm, internal dimensions: 12,032 x 2,352 x 2,698 mm, door dimensions: 2,343 x 2,585 mm, volume: 76.2 m³, weight: 4,000 kg Hedpfxezcnntj Af Eofh TRANSPORT: Please provide your postal code so that we can prepare a free and non-binding offer for containers including delivery and, if necessary, unloading from the truck. VARIETY: In addition, you will find sea containers of all common sizes (20DV, 40DV, 20HC, 40HC...) with us, for every need. Whether as storage, for construction projects, logistical solutions, or sea transport. We look forward to hearing from you! NAUTEXA GmbH

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Manufacturer: Steinel, 2-column punching tool -Hole: Ø 40 mm -Intermediate dimension: 165 mm -Punch dimensions: 1x Ø7 mm / 1x radius 13 mm, see photos with dimensions -Dimensions: 295/235/H250 mm -Weight: 19 kg Hfedpfxjzcwlno Af Eeh

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,818 h, travel distance X-axis: 155 mm, travel distance Y-axis: 25 mm, travel distance Z-axis: 170 mm, controller manufacturer: FANUC, controller model: 32i-TB, number of axes: 8, This 8s Muratec MW 40 was manufactured in 2019. It features a twin-spindle configuration with automatic loading and unloading capabilities. The machine includes 2 C-axes and 2 Y-axes, providing versatile machining options. With a total of 7 turning holders and 6 boring holders, it is designed for efficient part handling. If you are looking to get high-quality turning and milling capabilities, consider the Muratec MW 40 turn-mill centre we have for sale. Contact us for further details. • Configuration: Twin-Spindle CNC Turning Centre • C-Axes: 2 • Y-Axes: 2 • Gantry Loader: Double Gantry Loader • Spindle Configuration: Twin Spindle • Tool Holders: 7 Turning Holders • Tool Holders: 6 Boring Holders • Condition: Fully Functional • Turning Station • Voltage: 400 V • Frequency: 50 Hz • CE Marking: Yes • Loader Type: Gantry Loader • Automation: Automatic Loading and Unloading System • Part Handling: Automatic • Turning Capability: Yes • Drilling Capability: Yes • Milling Capability: Yes • Tapping Capability: Yes • Coolant Filtration: Basket Filter Hodezcwiyepfx Af Eofh • Transformer: 16 kVA • Transformer Input Voltage: 400 V • Transformer Output Voltage: 200 V • Hydraulic Chuck Foot Switches: 2 • Tool Monitoring System: Muratec Cutting Monitor • Tool Management System: Tool Counter with Sister Tool Selection • Polar Coordinate Interpolation: G12.1 • Cylindrical Interpolation: G7.1 • Rigid Tapping: Yes • Coolant and Air Through Spindles: Yes • Twin Front Spindles: Yes • Books are included (instruction manual in German) Optional: • Parts Infeed Conveyor • Parts Outfeed Conveyor • Chip Conveyor Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes