Used Oliver Fritz Gmbh & Co. Kg Sd 1500 2X 7,5Kw for sale (1,02,616)

Year of construction: 2021, condition: new, The container scale from WeDi GmbH is used to determine the fill level of roll-off containers. It consists of 2 drive-on ramps, each measuring 1000 mm x 400 mm x 160 mm, made of 10 mm thick steel plates, including end stops with reinforcing plates and struts, as well as a lateral centering rail and mounting holes. 1 weighing beam, 100 mm x 100 mm, length 2,300 mm, designed as a U-profile, 10 mm thick, with holes for mounting the load cells. 1 weighing beam, 100 mm x 100 mm x 1,400 mm long, designed as a U-profile, 10 mm thick, with holes for mounting the load cells, including a support plate made of 10 mm steel, reinforcing plates made of 10 mm steel plates, and 20 mm x 20 mm square steel for lateral guidance of the weighing beam. For weight measurement, 1 load cell kit BKSB 15000 with a weighing range of 15,000 kg and a readability of 2 kg is used, consisting of 4 x K30S 5000 load cells with spacer plates, 4 load feet, 1 JBB-04 junction and trimming box, and 10 m weighing cable for the display electronics. A BWI weighing electronics unit serves as the weighing electronics, featuring an illuminated 50 mm large display, dimensions 250 x 160 x 60 mm. It is housed in a high-quality, flat plastic case and offers user-friendly operation. Basic functions: tare, zero, gross/net. After assembly, the container scale is programmed to zero = empty Kat 3 container tare weight. The power supply is 220 volts. Price: 5,620 € plus VAT. Laedpfx Alegyph Asysh

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: Lasdpfsychbaex Alyoh 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: used, Year of construction: 2022, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NS-009-50Hz-11kN-300, type of input current: AC, nominal power at 50% duty cycle: 160 kVA, throat depth: 300 mm, short-circuit current: 25,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 15 V, Zens Multifunction Spot Welding Machine 160 kVA – 50 Hz – 11 kN – Year of Manufacture 2022 For sale is a Zens multifunction spot welding machine in a robust industrial design. The machine is designed as a 50 Hz alternating current system and is suitable for various spot welding applications. The machine features an integrated seam welding adapter. The corresponding seam welding heads are not included in the scope of delivery and can be purchased separately. Thanks to the modular design of the machine, it is possible to use different welding tools and applications. Technical Data Manufacturer: Zens Model: NS-009 Machine Designation: Multifunction Spot Welding Machine Year of Manufacture: 2022 Welding Technology: Alternating Current (AC), 50 Hz Welding Power: 160 kVA Duty Cycle: 50% Max. Welding Force: 11 kN Welding Control: SER PLC Control: Siemens CE Safety: 2-Hand Control Seam Welding Adapter: Integrated Equipment Zens Multifunction Spot Welding Machine 50 Hz Alternating Current Technology Integrated Seam Welding Adapter SER Welding Control Siemens PLC Control Device Carrier System with Touchscreen 2-Hand Control as CE Safety Device Modular Machine Design Robust Industrial Design Available Separately The seam welding heads are not included in the machine's selling price and can be purchased separately. The "On Top" water cooling unit is also not included in the machine's selling price and can be purchased separately. The machine is in good condition and can be inspected and demonstrated by appointment. Ledpfxoztn Sxj Alyoah Note: Seam welding heads and the "On Top" water cooling unit are available separately and are not part of the machine offer. Subject to technical changes and errors.

Condition: like new (used), Scale with the following dimensions: Length 2000 mm Width 1500 mm Height 110 mm Aisi 304 L stainless steel Load capacity 3000 kg The scale has valid certification for over 2 years Touchscreen display with multiple functions and language selection option Please check my other listings Ljdpey Ilvysfx Alyeah

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) Lasdpfsy D Sy Rsx Alyjh - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: used, mileage: 5,65,000 km, power: 243 kW (330.39 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 10 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space length: 8,150 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, spoiler, tail-lift, General information Year of manufacture: 2018 Year of construction: 2018 Registration number: 41-BKR-3 Axle configuration Front axle: Steering; Tyre profile left: 100%; Tyre profile right: 100% Rear axle: Double wheels; Tyre profile left inner: 100%; Tyre profile left outer: 100%; Tyre profile right outer: 100%; Tyre profile right outer: 100% Weights Empty weight: 9.705 kg Carrying capacity: 8.895 kg GVW: 18.600 kg Functional Tail lift: Dhollandia, 1500 kg Laodpfxsz Azr Dj Alyoh Maintenance APK (MOT): tested until 03/2027 = Additional options and accessories = - 3 Seats - Airbag - Air horn - Aluminium fuel tank - Camera system - Heavy duty engine brake - Lat to lath timbered - LED- lighting - Lock diff - Radio - Rear air suspension - Reversing camera - Roof spoiler - Suspension seat 2x

Year of construction: 2021, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 1,500 kg, total length: 3,340 mm, total width: 2,360 mm, total height: 2,925 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO SD Compact is a semi-mobile screening machine for efficient processing of soil, gravel, wood chips, waste, and recycling materials. It delivers high-precision separation, flexible operation, and reliable performance for construction sites, recycling plants, and material processing facilities. Key Features: • Modular design with interchangeable drums & quick-change system • Adjustable screen inclination & variable drum speed (5–20 rpm) • Up to four fractions per drum segment with cleaning brush system • Optional bunker expansion for +50% input capacity • Compact, semi-mobile design with easy transport & setup Tech Highlights: Laedpfx Aow Ryl Helyeh Drum Ø 1.3 m · L 2.1 m · Mesh Ø6–Ø100 mm · Qmax 20–50 t/h · n 5–20 rpm · P 5.5–7.5 kW · Weight 1500 kg · Screening surface 7 m²

Condition: like new (used), empty load weight: 2,300 kg, maximum load weight: 20,000 kg, overall weight: 22,300 kg, next inspection (TÜV): 11/2025, loading space length: 5,000 mm, loading space width: 2,000 mm, tire size: 450x300, color: orange, Year of construction: 2026, operation weight: 20,000 kg, Heavy-duty transport trailer with dimensions 5000 x 2000 x 610 mm. Payload of 20 tons at 6 km/h. All-wheel steering with kingpin axles and adjustable track rods. Tyres: solid rubber 450 x 300 on steel rims with double-sided tapered roller bearings. Drawbar with forged 40 mm towing eye and fall protection. Transport floor made of 40 mm spruce, countersunk and bolted. Lashing eyes for load securing welded to the frame on each longitudinal side. Double-acting wheel chock mounted on the frame. Lodpfxon D D S Sj Alyjah

Condition: used, mileage: 1,39,000 km, power: 154 kW (209.38 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 5,000 mm, fuel: diesel, color: green, gearing type: automatic, emission class: euro6, total length: 9,160 mm, total width: 2,550 mm, loading space length: 7,300 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, Year of manufacture: 2022 Year of construction: 2022 Front axle: Steering; Tyre profile left: 30%; Tyre profile right: 30% Rear axle: Double wheels; Tyre profile left inner: 60%; Tyre profile left outer: 60%; Tyre profile right outer: 60%; Tyre profile right outer: 60% Empty weight: 6.713 kg Carrying capacity: 5.277 kg GVW: 12.990 kg Tail lift: DHollandia, 1500 kg = Additional options and accessories = - Air horn - Air suspension Lsdez R A Tqjpfx Alyoah - LED- lighting - Line assist - Outside temperature display - Radio - Roof spoiler - Side door - Visor

Condition: excellent (used), Year of construction: 2019, Laser source: Manufacturer: SYNRAD, a Novanta Company Model: FSV40SFD Type: V40 Series: firestar Year of manufacture: 2018 Lasdoxzuimspfx Alyoh

Year of construction: 2015, condition: used, Waste water neutralisation Lajdpfexbqr Dox Alyeh Capacity: 8 m3/h Operation / Control: Control cabinet with touch-screen display / WAGO Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet

Condition: used, functionality: fully functional, Year of construction: 2010, load capacity: 1,500 kg, For sale: cranes as shown in the picture. The price is for one unit. Reach approximately 2m. Height under the bridge crane beam approximately 3m. The cranes are in very good condition. Sold without warranty or guarantee. Lasdpfx Aoz Iyt Uelyoh

Condition: new, Year of construction: 2025, Heavy-duty transport trailer for internal transportation Dimensions 4000 x 2000 x 510 mm All-wheel steering No Making Vulkollan tires 350x110x305 Wooden transport floor 40 mm recessed Bolted Painted in RAL 5010 or RAL 2000 Drawbar with drawbar eye 40 mm and with safety catch and height adjustment. 4 lifting brackets per long side see load securing Optionally with second drawbar head at the rear so that the drawbar can be moved from the front to the rear Laedpel D Ng Nsfx Alysh

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, load capacity: 4,000 kg, lifting height: 10,000 mm, battery voltage: 48 V, empty load weight: 9,000 kg, General information: The HUBTEX 2125-PU/SO with model MQ 40 is an electric multidirectional sideloader with a load capacity of 4 tons and a cross-seat cabin. This forklift is suitable for warehouse areas where maximum flexibility and maneuverability in narrow aisles are required to handle loads of up to 4000 kg. M = Multidirectional steering Q = Cross-seat cabin 40 = 4,000kg 2125 = Series PU = Vulkollan tires SO = fork tilting and lowering, extendable forks to 1500mm, hydraulic fork width adjustment Laodpfsx Aqaqox Alysh Additional equipment/modifications: - Camera system on the right and left of the forks, with monitor in the cabin - Positioning lasers on the right and left of the forks - Soft-stop feature when lowering the forks and when crossing the telescopic fork extension steps

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, For sale is a Fischercope H100C XYp micro-/nano-hardness testing system by Helmut Fischer (year of manufacture: 2001). The device was last used in a laboratory, but is currently not fully functional and is therefore expressly sold as defective / for repair or as a source of spare parts. Laedpfx Aeyu Nabelysh Known issues: - Table advance movement does not function correctly (the table is positioned under the measuring head, not under the microscope – precise measurement is currently not possible). Likely an electronic issue. - The measuring table moves independently to the left – possibly a joystick failure. - Indenter change does not work correctly (the probe does not move fully to the end stop). Therefore, the device is particularly suitable for: • Repair by individuals with electronics expertise • Sourcing of spare parts • Research / hobbyists The optical condition is good for its age.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: WL-01990-21, Industrial heater for oil & gas, 19,000 m3 per hour. Consumption: 302 kW. Ljdpfxozyubye Alyoah The burner is a Riello burner, and the gas valve unit is from DUNGS. In new condition.

Condition: new, functionality: fully functional, machine/vehicle number: 0681, empty load weight: 2,100 kg, maximum load weight: 16,000 kg, overall weight: 18,100 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, wheelbase: 4,000 mm, color: orange, Year of construction: 2025, Equipment: center pivot plate, The TPW 16 VL - LK has a payload capacity of 16,000 kg on the loading platform at 6 km/h. The dimensions are 5,000 mm long, 2,000 mm wide, and approximately 640 mm high. It features a turntable steering system on the front axle and a rigid trailing axle. The drawbar is equipped with a drop safety device, and the forged towing eye has a 40 mm bore. Heavy-duty banded tires 425 x 150-305 are fitted as twin wheels on steel rims and sealed on both sides with tapered roller bearings using a Nilos ring. For safety, four welded-on lashing brackets are fitted to the longitudinal sides (for load securing), and a double-acting wheel chock is mounted on the frame. The paint finish is yellow-orange RAL 2000. The transport floor is made of 30 mm tongue-and-groove boards, countersunk and bolted. Lajdpfx Alsrcfz Tsyoh

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 1018, control type: PLC-controlled, degree of automation: manual, actuation type: electric, pipe diameter (max.): 50 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, warranty duration: 24 months, Equipment: CE marking, emergency stop, foot remote control, quick-change device, THE MANDREL BENDER WITH MANUEL CLAMPING: Laodpsnfvy Usfx Alyeh This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Two separate units are for sale. Both units were acquired at the beginning of 2020. Unit 1: - 4.0m suction slit channel AS 590 made of aluminum with neoprene lip seal - 1 piece connection flange DN 315 - 1 piece suction hose carriage Rollfix and central flange for hose DN 250 Price: €450 excl. VAT. Lasdozuwcvopfx Alyeh Unit 2: - 10.0m suction slit channel AS 740 made of aluminum with neoprene lip seal - 1 piece connection flange DN 355 - 1 piece suction hose carriage Rollfix and central flange for hose DN 300 Price: €1120 excl. VAT.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2014, total length: 14,010 mm, total width: 2,500 mm, suspension: air, wheelbase: 8,940 mm, color: blue, General information Year of construction: 2014 Registration number: ON-75-JR Axle configuration Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 4.220 kg Carrying capacity: 36.780 kg GVW: 41.000 kg Maintenance, history and condition APK (MOT): tested until 03/2027 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Twist-locks Laedezxh Iwspfx Alyeh = Remarks = Krone SD 45FT / 4220 kg / Container Chassis / BPW + Drum

Condition: used, Year of construction: 2016, refrigerant: ammonia Additional title: room cooling Volume: 10 l Permissible pressure: 32 bar Lasdpfx Aozty Ewjlyjh Permissible temperature: 150 °C Rotation speed fan: 1400 rpm Features: refrigerant: ammonia, 1 fan; control cabinet with temperature control

Condition: used, Year of construction: 2025, TPW 30 AL - AS with all-wheel drive, axle stub steering, and tires 559x300 Transport platform made of Douglas fir wood, 40 mm thick, Dimensions: Length 4000 Ledpfx Ajhbmukelysah Width 2000 Drawbar 1600 mm with towing eye 40 mm and safety mechanism with height adjustment Paint finish: RAL 2000 #In-plant transport systems #Heavy-duty trailers 6-100 tons #Heavy-duty trailers from 3 tons to 100 tons #Heavy-duty transport platform trailers #Platform heavy-duty trailers #All-wheel steering #Transport trailers

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 -Load capacity: 1500 kg -Travel speed: m/min Lsdpfx Aleq Tvpxsyjah -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Lifting height: approx. 8.5 m -Transport dimensions: 1120/1020/H380 mm -Weight: 251 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit Lajdpfx Alswh Rp Eoysh - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Year of construction: 2024, operating hours: 49 h, condition: as good as new (ex-display), power: 5.5 kW (7.48 HP), overall weight: 1,500 kg, total length: 3,340 mm, total width: 2,360 mm, total height: 2,925 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO SD COMPACT Screen Drum is a robust, semi-mobile solution for recycling, construction, and material processing. Designed for coarse materials such as soil, gravel, wood chips, and waste, it offers precision screening, high throughput, and easy mobility. Its modular design and adjustable settings make it ideal for operators who need flexibility and long-term reliability in demanding environments. Lasdpfow Rygkex Alyeh Key Features: • Modular construction with variable drum control and adjustable rotation speed • Interchangeable screening technology with vibration support and cleaning brush • Up to four-fraction separation in one drum segment • Adjustable screen inclination and optional bunker expansion (+50% capacity) • Free-ride mode, quick-change bunker, and drum extension for maximum versatility Tech Highlights: L 3.34 m · W 2.36 m · H 1.95 / 2.92 m (with support) · Drum L 2.1 m (usable 1.7 m) · Outer Ø 1.3 m · Usable screening surface 7 m² · System capacity 20 – 50 t/h · Mesh Ø 6 – Ø 100 mm · Hopper opening 2.24 × 0.85 m · Speed 5 – 20 rpm · Drive power 400 V / 5.5 kW (optional 7.5 kW) · Filling height 2.55 m · Weight 1500 kg