Used Optima Gmbh Df4-1 for sale (1,10,308)

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climatic test chamber -70 to +180 °C Manufacturer: Weiss Umwelttechnik GmbH Type: Climatic chamber WK-1000/70 Prsdpjph U Ayjfx Abpsa Test chamber volume: 990 liters Temp. range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Nominal output: 13.8 kW Refrigerant: R 404A Control system SIMCON/32 microprocessor-controlled control and monitoring system - 32 bit technology - Graphic display of setpoint and actual value - Digital setpoint and actual value display of temperature and % relative humidity - digital input for temperature in °C and humidity in % rel. humidity - Integrated programmer - program memory - Manual and automatic operation - Fault diagnosis system Operating hours: 34303.8 h Year of construction: 2004 Test area dimensions: Height: 950 mm Width: 1100 mm Depth: 950 mm External dimensions: Width: 1400 mm Depth: 1900 mm Height: 1970 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 2011, operating hours: 19,630 h, functionality: fully functional, machine/vehicle number: 1263718, type of input current: three-phase, power: 400 kW (543.85 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, total height: 1,850 mm, total length: 3,090 mm, total width: 1,480 mm, fuel: biodiesel, overall weight: 4,500 kg, type of cooling: water, nominal power: 400 kW (543.85 HP), nominal power (apparent): 400 kVA, input frequency: 50 Hz, empty load weight: 4,500 kg, Equipment: documentation/manual, Two MWM cogeneration plants manufactured in 2011 are for sale. They are ideally suited for decentralized combined heat and power generation. Key technical specifications of the MWM cogeneration plant, according to the documentation: Fuel used: biogas Generator: MarelliGenerators Engine: MWM GmbH Predpjzudbfofx Abpsa Type: TCG 2016 V8 C Identification No.: 1263718; 1263719 Year of manufacture: 2011 Engine mechanical power: 415 kW Engine electrical power: 400 kW Thermal power: 398 kW Max. fuel consumption: 941 kW Speed: 1500 rpm Ignition system: Altronic ZS3 Ignition system No.: 3644 Ignition angle: 23.00 Ignition plug type: 12342688 Power regulation: multi-stage GEN-1: 19,440 operating hours GEN-2: 19,630 operating hours The cogenerators are sold with electrical and control cabinets, flue gas heat exchangers, emergency coolers, engine circuit pumps, heat exchangers and three-way valves, ventilation air systems, and acoustic containers.

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: Parmel_042026PA, type of input current: three-phase, total width: 2,504 mm, total length: 5,768 mm, input voltage: 400 V, feed length Y-axis: 2,500 mm, working width: 1,800 mm, total height: 1,330 mm, repeat accuracy: 0.01 mm, cutting width (max.): 1,600 mm, cutting height (max.): 50 mm, compressed air connection: 4 bar, BUFFALO Cutter – Fabric & Textile Cutting Machine Our BUFFALO Cutters are the ideal solution for the precise cutting of textiles, leather, technical fabrics, and composite materials. With state-of-the-art CNC technology, they guarantee: • Highest cutting precision for patterns, prototypes, and series production • Flexibility for different materials and formats Pedezf Ifvopfx Abpera • Efficiency through short setup times and automated processes Whether in the fashion, furniture, or automotive industry – our fabric & textile cutting machines deliver perfect results with maximum productivity. Model PC W16L25 • Single-layer cutting up to 50 mm height • Working area (W × L): 1600 mm × 2500 mm • 2 cutting heads, double cutting head, needle punch, and plotter pen holder • Tool kit: ERT, EOT, VPT (electric rotary knife, oscillating knife, punching module) • KIS (Knife Initialization System) • Vacuum pump • Air compressor • Passive roller feeder for non-elastic fabrics • Parmel Cutting Software • 12 months warranty We offer installation, training, spare parts, consumables, and guarantee smooth operation both during and after the warranty period.

Condition: like new (used), functionality: fully functional, Z1015201800 Z1010880270 etc. Prodpexy I D Uefx Abpsa

Condition: used, Year of construction: 2000, Optima EC automatic continuous scale 1390-750-1500 RA1259 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Pjdpfx Abek Aa Rkjpera Year of construction: 2000 Machine type: automatic checkweigher Total size: approx. 1390 x 750 x 1500 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative humidity 20 - 80 Volume: the A-weighted equivalent continuous sound pressure level is below 70 db(A) Conveyor belt 1390-700-590 and SEW gear motor with brake Conveying length (FL): 1390 mm effective width (NUB): 700 mm belt width (GB): 590 mm Motor Type: SEW Gearmotor with brake Motor Power: kW 0.55/0.55 S1 Hz 50 A 2.80/1.61 Speed: 10-36 m/min total weight: 190 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling depth: 600 mm, rotational speed (max.): 6,000 rpm, center height: 250 mm, controller model: SIEMENS Sinumerik 840 D, workpiece diameter (max.): 25 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been completely overhauled! TECHNICAL DETAILS Working depth: 600 mm Working diameter: 4 – 25 mm Number of spindles: 2 Centre height: 250 mm Centre distance: 203.2 mm Speed range: 1,000 – 6,000 rpm Feed rate: 0 – 300 mm/min Rapid traverse: 6,000 mm/min MACHINE DETAILS Control system: SIEMENS Sinumerik 840 D (Retrofit) Drilling system: Single-lip deep hole drilling Main drive: 2 x 5.5 kW EQUIPMENT - Single functions for machine setup - Semi-automatic operation for manual loading - Robust spindle carriage - Machine monitoring with spindle speed display - Table plate in special cast design - Safety guard with sliding door - Machine bed with hardened and ground linear guides Pjdpfx Abjxpvbtjpera - Internal coolant supply through drilling spindle - Electrical equipment according to IEC standards - Separate control cabinet with safety devices - Control panel in working area

Year of construction: 2022, operating hours: 1,861 h, condition: excellent (used), functionality: fully functional, For sale is a Rösler wheel processing system, type FBA 24/2 Turbo. This system was specifically developed for the needs of professional wheel processing and, thanks to two laterally arranged unbalance motors, enables flawless results with short processing times. The stepless speed control and adjustable motor position allow the system to be flexibly adapted to almost any processing task. The compact wheel processing system is ideal for pre-grinding, fine-grinding, and polishing of standard and custom wheels up to 24 inches. Thanks to easy operation and quick abrasive change, wheels can be polished to a mirror finish in just a few hours – for a high-quality mirror finish in an elegant metallic look, both for used and new wheels. The pneumatic loading and unloading system makes loading and unloading the wheels very easy and quick. In addition to wheels, other components can also be processed here. The working container is equipped with a flexible clamping device for different wheel types and is lined with a high-quality wear-resistant lining made of polyurethane elastomer (Rösler HD 90). The specially ribbed, stress-relieved, annealed welded construction ensures a long service life and smooth, robust operation even in continuous operation. Application areas: High-gloss polishing of wheels of all types (automotive and motorcycle) up to 24 inches Aluminum, cast, and forged wheels Polishing of other engine components Refurbishing of components, e.g., from the classic car sector or the aerospace, defense, etc. industries Prodpfxjzw A Rwj Abpoa Technical specifications: Manufacturer: Rösler Oberflächentechnik GmbH Type: FBA 24/2 Turbo wheel processing system Working container: Inner diameter 700 mm, container depth 550 mm Wear-resistant lining: high-quality polyurethane elastomer, Rösler HD 90 Design: durable, specially ribbed welded construction, stress-relieved, annealed Motors: 2 special unbalance motors designed for continuous operation Speed: 3,000 rpm, steplessly adjustable via frequency converter Automatic reversing of direction of rotation Various programs can be stored in the Siemens PLC control system, thus achieving reproducible results. An automatic program sequence guarantees a low error rate for the operator. We have a total of over 80 vibratory finishing systems in stock; please contact us for all your vibratory finishing needs.

Condition: used, Year of construction: 2008, Single-sided edge banding machine Manufacturer: HOMAG Type: Optimat KAL210/6/A20/S2 Year of manufacture: 2008 Single-sided machine for joint milling of straight workpiece edges, edge banding and finishing of various edge materials from rolls or as strips, up to 20 mm edge thickness, in longitudinal and transverse operation. power control PC22 Modern control system based on Windows PC Technical data - Feed rate 18 - 25 m/min. - Feed rate with profile milling cutters FK11 max. 20 m/min. - Workpiece thickness 8 - 60 mm - Edge material strips max. 0.4 - 20 mm - Edge material rolls 0.3 - 3 mm Joint milling unit - 2 motors, each 3 kW, 150 Hz, 9,000 rpm. for joint milling of the workpiece edge before edge banding - electropneumatic control of both motors Gluing unit A20 - 2 rollers Quickmelt hot melt adhesive unit - Temperature control electronically with LED display Magazine for 1 roll, manual - for solid edges, strips and rolls - 1 edge feed - 1 roll holder Prodpfezux R Ijx Abpea Pressure zone C - 1 driven pre-pressing roller, diameter 150 mm - 6 after-pressing rollers, diameter 70 mm Trimming unit HL84 / 0.8 kW - 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm. - Motors can be manually swiveled for chamfer trimming Pre-milling unit 1.5 kW - 2 motors arranged one above the other, each 1.5 kW, 200 Hz, 12,000 rpm. Profile milling unit FK11, manual - For processing the edge overhang on the top and bottom edges of the workpiece and for milling the front and rear edges of the workpiece Belt sanding unit KS 10 - for sanding straight and solid wood edges, oscillating, sanding pressure manually adjustable Profile sanding unit PS 10 - sanding from below, for sanding profiles, sanding pressure manually adjustable Automation package Chamfer / Radius KAL210/6/A20 - Automatic adjustment of the infeed fence - Automatic adjustment of the pressure zone - Pneumatic adjustment from chamfer to straight trimming - Pneumatic adjustment of the trimming motors for flush or overhang trimming - Pneumatic adjustment of the pre-milling unit for flush or overhang milling - Automatic adjustment from chamfer to radius milling during profile milling - Pneumatic adjustment PN10 / FA11 - Electronic height adjustment

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036679, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 6,00,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base-level injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, simple operation, and short lead times. The machine is suitable for a wide range of applications, including the packaging, electrical and electronics, medical technology, and automotive industries. Your benefits: – Optimised price-performance ratio for a broad array of applications – High energy efficiency thanks to all-electric machine concept – Fast delivery times thanks to base machine concept with a wide range of available options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year of manufacture 2013) CONTROL SYSTEM • MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT • Clamping force: 1,600 kN • Maximum mould opening force: 120 kN • Daylight (h x v): 570 x 520 mm • Platen size (h x v): 770 x 720 mm • Mould height min.–max.: 200 - 500 mm • Maximum opening distance: 950 mm • Maximum mould opening stroke: 450 mm • Ejector drive: electric • Ejector stroke: 100 mm • Ejector force forward/backward: 33 / 33 kN • Ejector speed forward/backward: 300 / 300 mm/s • Max. mould weight: 1,200 kg INJECTION UNIT • Screw diameter / type: 50 mm / standard • Effective L/D ratio: 20.2 • Injection pressure: 1,892 bar • Shot volume: 393 cm³ • Shot weight at max. stroke for PS: 358 g • Injection speed: 200 mm/s • Injection flow rate: 393 cm³/s • Screw drive/speed: 267 rpm • Plasticizing rate (standard screw): 36.5 g/s • Nozzle contact force: 42 kN ELECTRICAL PARAMETERS • Connected load: 31.2 kW • Installed heating capacity: 15.5 kW Prjdpfxsyzz Ire Abpja • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 9.7 t • Length x Width x Height: 5.65 x 1.82 x 1.95 m ADDITIONAL EQUIPMENT • Wear-resistant plasticizing • BluePower full insulation of plastification cylinder • Open nozzle • 1-fold air valve (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Electrical interface for pneumatic cascade 4-fold • Euromap interface for handling E18 + E67 • Euromap interface (central computer) E67, E77 • 4-way water manifold • Electrical pre-equipment for hydraulic auxiliary unit • Automatic central lubrication system • Adaptive Process Control (APC) • Injection compression moulding function • Graphic analysis package • Swivelling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: good (used), Year of construction: 1999, AXOMATIC OPTIMA 1000 Tube Filling and Sealing Machine (Plastic Tubes) This compact machine has a capacity of up to 70 plastic tubes per minute and is used for filling and sealing tubes. With the appropriate format and pump sets, the machine can be adjusted to handle the following specifications: Tube diameter: 10 - 60 mm Tube length: up to 280 mm Filling volume: 2 - 300 ml The machine is offered with the following format parts: Tube holders for plastic tubes Ø 35 mm and 48 mm Prjdpjx Rqlfofx Abpsa Manufacturer: Optima Year of manufacture: 1999 Required floor space: approx. 180 x 160 x 240 cm

Condition: used, Year of construction: 2003, machine/vehicle number: 1964, Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Pjdpfx Aeuqc Ivsbpjra Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Psdpfx Aberc Hiiopera

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, - Working dimensions: 3050 x 1250 mm - Main spindle: 11/13 kW (S1/S6) Podowiuz Ujpfx Abpjra - C-axis - Drills: 8 x V, 2 + 2 H - Grooving saw - Tool magazine: 10 slots

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Place: Austria Available immediately Predpfx Aexy Rddsbpoa

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,000 mm, The horizontal machining centers in the XpertK series are characterized by their outstanding modularity. Choose from a variety of table variants and matching milling heads, complemented by a wide selection of spindles. The XpertK machines are ideal for special requirements where standard machines are not sufficient and offer customized flexibility and individuality Xpert K 3512 - Horizontal machining center - Series: Xpert K - Travel X/Y/Z: 3500 x 1200 x 1000 mm - Optional Y-axis: 1600 mm - Milling head: M-Series fork milling head Prodpfor H Hhnjx Abpoa - Spindle: 12,000 min-1 / 53 KW / 253 Nm - Tool holder: HSK-A100 - Control: Heidenhain TNC 640 - Clamping surface: 4,000 x 2,200 mm - Payload: 15,000 kg - Rapid traverse: 30 m/min - Acceleration: 3 m/s² Modularly expandable, further options: - Sliding table X-axis - Cross table X and W-axis - Rotary table X and C-axis (Ø 2,000 mm) - Table travel X-axis up to 6,000 mm - Table travel W-axis 1,200 mm - Movable work unit Y- (vertical), Z- (slide) and W-axis (1250 mm) - Milling and turning machining possible - 18 spindle variations - Clamping area can be extended up to 6,000 x 2,500 mm

Condition: ready for operation (used), A Maka 5-axis CNC machining center for aluminum, plastic, or wood in need of repair is offered. Travel path X/Y/Z: 2500mm/1500mm/650mm, max. fixture height: 180mm, rapid traverse X/Y/Z: 60m/min, C-axis rotation: 540°, A-axis swivel: +/-98° (196° total range), number of work tables: 2, table size per table: 2500mm x 1500mm, magazine capacity: 20 tools per magazine, total tool positions: 2x20. The drive motor of the Z-axis is defective. Inspection possible by appointment. Prodpjzcyq Hsfx Abpea

Condition: used, (1) Industrial multi-stage parts washing/cleaning line, (1) roller conveyor infeed (Ullmann Fördertechnik GmbH), several wire mesh transport baskets, (1) technical manual, (1) centrifuge/oil separator unit (Type SMR100-BO-2) Technical details: Podpszwf Tbofx Abpsra Data Industrial multi-stage parts washing/cleaning line: overall dimensions approximately 9020 x 2610 x 3390 mm, max. load weight approximately 100 kg, total heating and motor power approximately 67.4 kW, supply 400V 50Hz Data Centrifuge/oil separator (Type SMR100-BO-2): machine no. 993 019 010, year 2001, main motor 5.5 kW

Condition: good (used), Year of construction: 1999, Esta Spänesog-SB 8151 Chip Extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. The unit is ideally suited for workshops for the extraction of chips and dust (e.g., in metal or wood processing). Technical specifications Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amperes): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) Prodeznibwepfx Abpoa You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2025, Sharpening of woodworking tools The Profi Firmer ( piercing bag) and Planer knife grinding machine WOOD TOOL GRINDER WTG -1 - "Swiss quality" For an accurate and efficient work perfectly honed, razor-sharp cutting edge is a must. With our grinder to sharpen your tools " wood chisel (holly bag) , planer knives , chisels , chisel " , fast, easy , accurate and inexpensive ... Currently, the absolute cheapest PROFESSIONAL wooden tool grinder on the market! Made in Switzerland Swiss Quality = Predpfx Abeb Dt Ixepoa Where the WOOD TOOL GRINDER is " WTG -1" used? • Wherever conventional wood is processed. • For example, in carpentry , joinery , • Carpeting , schools, trade schools , • schools / training workshops ... Base machine price : EUR 2050.00 (ex works , excl 8.0 % VAT) You win and this several times ! If you regrind a wood chisel or a hand planer blades by hand or with an " older machine " experienced artisans need 5 min or more per tooth , if not even longer and get a good result ! With the WTG you need just about 30 seconds per tool . In no time you grind even a whole set of tools. And that, too, without having any special knowledge or grinding years of experience . So the machine can pay for itself relatively quickly. But above all, can be obtained every year , high , variable costs for tools and grinding work to a minimum . Once in possession of a WTG machine, you just have to work with perfectly cut tools , which has a positive impact among others on the quality and speed of operation. Go with the time ... go with BERGER technology GmbH. Your direct contact persons : Grinding Technology : Marc Broennimann Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo,

Year of construction: 2023, condition: used, Our smallest drum sieve the REMAV RS1500 is designed for space-saving sieving and, with a small space requirement, can separate larger quantities of screenings and lay them over conveyor belts and in heaps! As a car trailer with street legal (80 km / h) with TüV it is easy to transport with 2.4 to total weight. Processing of all kinds of soils, broken rubble or compost - the RS 1500 is ideal for use in gardening and landscaping, civil engineering or pipeline construction. Predpfxshg Epae Abpja

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, total length: 1,050 mm, total width: 1,040 mm, total height: 1,240 mm, overall weight: 410 kg, number of drawers: 5, !RETURNED KNIVES! Directly from the manufacturer, the original from the patent holder Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing: gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Prsdpfx Abjuua Uzjpsa Payload per pull-out 900 kg Product code: 94032080 Swiss commodity code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set approx. 26 running meters of press brake tools completely assembled. Available in various sizes and with many accessories!

Condition: good (used), Indumat THO 310 Automated Guided Vehicle (AGV) A robust, industrial automated guided vehicle (AGV) from the proven system portfolio of INDUMAT and E&K Automation. The vehicle combines Indumat’s extremely solid and durable mechanical engineering with the flexible control technology of the TELETRAK MULTI series. The unit is ideally suited as a source of spare parts, for retrofit projects, for automating internal facility processes, or for expanding existing systems. Technical Data (according to nameplate): Manufacturer (Mechanical): INDUMAT GmbH & Co. KG (Reutlingen) Control System / Brand: E&K Automation TELETRAK MULTI Model / Type: THO 310 Unit No.: 9930 92 26844 Year of Manufacture: 03/1993 Load Capacity: 1000 kg Dead Weight (without battery): 2720 kg Nominal Battery Voltage: 48 V Equipment & Components: The vehicles were subsequently upgraded with modern touch-display controls and are in good, clean condition. Prodozkqdxspfx Abpsa These vehicles are constructed using high-value, sought-after industrial components of OEM quality. Professional Safety Laser Scanners: High-end sensors for personnel and obstacle detection. Load Handling Device: Integrated, powered roller conveyor featuring three flanged guide rollers for the automatic, centered pickup and transfer of specific load carriers (e.g., pallets or special racks). Control & HMI: Side-mounted control panel featuring a display, key switch, function buttons, indicator lights, and a connection port for a wired handheld control unit. Safety Features: Easily accessible emergency stop switch; Cutouts in the bumper area for optical pedestrian protection scanners (e.g., SICK laser scanners) or mechanical safety edges. Control cabinet: Spacious electronics compartment for the central control system, located in the upper housing section and accessible via lockable double doors. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Briquette diameter: 150 mm Technical Data Briquette diameter: 140 or 150 mm Capacity: - Cast iron chips: 4.8 – 5.3 t/h - Steel chips: 4 – 5 t/h - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Main cylinder force: 5,300 kN Psdpjxy E H Hefx Abpera Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, overall weight: 363 kg, total length: 1,050 mm, total width: 1,040 mm, total height: 1,240 mm, number of drawers: 5, !RETURNED KNIVES! Prsdpfx Abjuv Edlspoa Directly from the manufacturer, the original from the patent holder Apfel GmbH. Also available in other sizes! Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing: gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Payload per pull-out 900 kg Product code: 94032080 Swiss commodity code: 9403.2010 Origin: DE/08 Weight: approx. 363 kg Completely assembled as a set including 4 tool holders WKH 210 4 tool holders WKH 211 4 tool holders WKH 212 4 tool holders WKH 213 2 tool holders WKH 214 2 tool holders WKH 215 3 tool insert plates WEB 360 2 tool inserts WEB 367

Condition: used, Name: Dispersion Mixer Manufacturer: Schneider Maschinenbau Gmbh Prodjrmmk Uopfx Abpea Type: SHDC15 KWFU Ex Year built: 2010 Speed: 150 - 1500 rpm Material: Stainless steel Driving force: 22,55 kW Model: Explosion protection: II 2 / 3 D c T120°C Total content: approx. 900 liter tank Parts in contact with product: Stainless steel Equipment: Hydraulically extendable Dimensions: Machine height approx.: 3100 mm, (top extended) Length, with container, approx.: 2200 mm, Weight, without container, approx.: 1600kg Foundation load approx.: 6000 kg / m3 Empty weight: 1600 kg Technical doc.: Yes in PDF Accessories: Stainless steel mixing container, solvent disc diameter 450 mm, frequency converter Condition: Second hand Price: On demand