Used Other Puch 230Ge Mit Schneeräumschild Für Den Winterdienst, Zaugg Schneepflug for sale (30,103)

Condition: used, mileage: 9,25,000 km, power: 95 kW (129.16 HP), first registration: 04/2004, fuel type: diesel, empty load weight: 9,500 kg, maximum load weight: 18,000 kg, overall weight: 27,500 kg, tire size: 295/60r22.5, axle configuration: 2 axles, wheelbase: 4,800 mm, color: white, gearing type: automatic, emission class: euro3, suspension: air, Year of construction: 2003, operation weight: 18,000 kg, Equipment: additional headlights, hydraulics, trailer coupling, Material handling machines for moving containers, trailers, and semi-trailers. Bosch Rexroth hydrostatic transmission. Mercedes OM904LA engine. From 18,500 operating hours. Registered versions available, usable with a Class B driver's license. Various models available, with and without a fifth-wheel coupling for semi-trailers. Knsdpfopa Uylox Anuoc

Condition: used, fuel type: diesel, Year of construction: 2023, machine/vehicle number: EXVAC SE.10, RIVARD suction excavator EXVAC SE.10 !! IMMEDIATELY AVAILABLE !! RIVARD industrial turbine Detachable suction hose connection 10.5 m³ container volume 4-link boom Hydrostatic drive Filter cleaning Fall protection at the rear / front Camera-based travel monitoring Kodpfx Askl N R Aonusnc

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof support: Hot-dip galvanized bolted system Scope of delivery: 9 Racking uprights, height 4,230 mm, with base, usable depth 1,200 mm 27 Cantilever arms with 1,200 mm usable depth, with stop 9 Roof supports with 1,500 mm overhang, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Knedpfxeh R Taqe Anusc Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms adjustable in height in 100 mm increments - 3 bolt-on cantilever arms with a depth of 1,200 mm, with stop, per upright = 4 storage levels on top of each other - Including longitudinal and diagonal braces with 1,500 mm center distance - Racking length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subsoil must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the condition of the ground, its load-bearing capacity, and any necessary official permits. The racking uprights must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the racking uprights on the top storage level have a minimum overhang of 500 mm from the top edge of the upright.

Condition: good (used), The scope of delivery includes: 1x Shelf connector, used Material color: Sendzimir galvanized L-profile dimensions: (see below) 298 x 81 mm (4 round holes, Ø 9 mm) 250 x 30 mm (one oblong hole) Center-to-center distance of round holes: 278 | 50 mm Shelf spacing: approx. 250 mm Weight: approx. 0.600 kg / piece 4x Hex head screws, M8 x 20 8.8. 4x Hex nuts, M8 4x Washers, M8 Kedpfx Aei Dtcnenusnc General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Year of construction: 2023, condition: new, machine/vehicle number: 801694948, Drill string + hydraulic hammer Knedohypv Repfx Anujc 8x 76mm DTH drill string, 4000mm x 63mm, 2 3-8" API Reg 1x 3.5" DTH hammer with "shank with 2 3-8" API Further information: Application: Construction

Year of construction: 2023, condition: new, machine/vehicle number: 383036928, 16x 120mm DTH drill rods, 4000 mm x 85 mm, 2 7-8" API Reg Kodpfxshypv Ue Anuonc 02x adapter shank 2 3-8" API Reg Pin x 2 7-8" API Reg Box 02x 140mm DTH drill bit 02x 5" DTH hydraulic hammer with DHD350 shank, 2 7-8" API Additional information: Intended use: Construction General condition: very good Technical condition: very good Visual condition: very good

Condition: used, operating hours: 6,235 h, machine/vehicle number: 169, mileage: 48,250 km, color: orange, First registration: 08/1995 Permissible total weight: 4,000 kg Kjdpeiuludefx Anuenc Errors and omissions excepted.

Condition: new, Year of construction: 2025, machine/vehicle number: 472684923, Gasparin Jaw Crusher GI107CV Vesuvio, mobile jaw crusher on a tracked chassis The mobile crusher GI107 VESUVIO stands for versatility and can be configured in two different ways. Equipped with a Grizzly vibrating feeder (GI107C), it is suitable for more traditional applications. With a vibrating feeder and pre-screen, the machine (GI107CV) is suitable for demanding applications with high fines content and high material moisture. With its standard equipment featuring the patented HCS system (Hydraulic Crushing System), VESUVIO is the best solution for the requirements of professionals and rental companies. Production capacity: approx. 320 tons/hour Patented HCS system Proportional valve with "Load Sensing" for system optimization and a reduction in fuel consumption of approximately 30%. Jaw gap hydraulically adjustable, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3000 mm Dust extraction Ksdehd I Rzepfx Anuenc Tank pump Magnetic separator Warranty 1 year, up to a maximum number of operating hours from the start of operation Technical data: Jaw crusher 1020 x 700 mm Crushing gap from 45 to 180 mm Hopper 5 m³ - 2000 x 3960 mm Two-deck vibrating screen 1020 x 1800 mm Main conveyor belt 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 HP / 60 kW, emission stage V Control panel Tracked chassis 400 x 3310 mm Weight: kg Transport length 12900 mm Transport width: 2530 mm Transport height 3200 mm Further information: Application: Construction, General condition: very good, Technical condition: very good, Optical condition: very good

Condition: new, Year of construction: 2025, machine/vehicle number: 127802131, Additional options and accessories Notes: concrete plant Frumcar EBA 1700 Kjdpehd I Trjfx Anuonc Year: NEW - 4 aggregate hoppers of 25 m³ - Capacity: 70 m³/h - mixer size: 1.67 m³ / 2250 liters - K2 portable computer system - screw conveyor for cement - cement silo 55 tons - international assembly included - 2 years guarantee This offer is subject to change, and may contain input errors or mistakes. Only the specific agreements in the order confirmation or the sales contract are valid. More machines and mixing plants can be found on our website. Further information: Intended use: construction, usable material: concrete.

Condition: new, Year of construction: 2025, machine/vehicle number: 982988248, Frumecar Modulmix 2000 concrete batching plant Year: New Capacity: 90 m³/h - 4-5 aggregate hoppers / in-line arrangement Knjdpohd I Tvefx Anuoc - Hopper capacity: 60 - 120 m³ - Mixer size: 2.0 m³ / 3000 liters - K2 fully automatic computer system - Electric control system: Siemens S7 - Cement screw diameter: 273 mm - Cement silo: 1-4 - International assembly included - 2 years guarantee from start-up - Winter housing possible This offer is subject to change, and may contain input errors and mistakes. Only the specific agreements in the order confirmation or sales contract are valid. More machines and mixing plants are available on our website. Further information: Intended use: Construction Usable material: Concrete General condition: very good Technical condition: very good Optical condition: very good

Condition: new, Year of construction: 2025, machine/vehicle number: 860828850, Mobile impact crusher Gasparin GI1010CV K1 on tracked undercarriage The K1 impact crusher with tracked undercarriage is a new addition to the product range, featuring an impact mill with a capacity of 250 t/h. It can be equipped with a post-screening system with return to a closed circuit, to perfectly calibrate the final product. It is valued for the excellent quality of the crushed product and also performs optimally in terms of operational efficiency. Production capacity: approx. 250 tons/hour Proportional valve with "Load Sensing" for system optimization and a reduction in fuel consumption of approx. 30%. Gap size hydraulically adjustable, even during the crushing process. Fast locking system with wedges and folding cylinders. Dust extraction system. Tank pump. Magnetic separator. Warranty: 1 year or up to maximum operating hours from the start of operation of the system. Technical data: Impact crusher type M x 700 mm Crushing gap from 30 (20) to 100 mm (gap adjustment to 20 mm only possible with the 3rd grinding track) Feed hopper 4 m³ - 1800 x 3700 mm Single-deck vibrating screen 950 x 1500 mm Main conveyor belt 800 x 9600 mm 4-cylinder diesel engine with constant speed 82 HP / 60 KW, emission stage V Control panel Tracked undercarriage 400 x 2900 mm Weight: kg Transport length 12560 mm Transport width: 2550 mm Transport height 3200 mm Further information: Intended use: construction industry, unladen weight: kg, general condition: very good, technical condition: very good, optical condition: very good, transport dimensions (L x W x H): 12.56 x 2.55 x 3.2 Knodpfxohd I T Ij Anuoc

Condition: new, Year of construction: 2025, machine/vehicle number: 618621425, Marini Magnum 140 mobile asphalt mixing plant Year: NEW Capacity: up to 140 t/h 1 year warranty Knodpfx Aehd I T Sjnuoc - Calorific value of the fuel: 9,600 kcal/kg - Material passing through the #8 (2.38mm) sieve: no more than 20% - The equipment was developed to facilitate transportation as much as possible without the need for pilot vehicles. Simply connect the equipment to the asphalt binder storage and fuel system. - Chassis is constructed with a highly resistant I-beam with a forged kingpin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, and a mechanical support leg with telescopic support. - Quadruple feed bin (two-by-two) with a 3.80mm wide opening and a capacity of 6m3, completely designed to withstand the stresses during material unloading. Regulated slide gate for aggregate flow. - Automatic vibrator system for one bin, which facilitates the flow of fine aggregates with high humidity levels in one of the bins. - Feeding belts with 20" wide canvas supported by 4" rollers in a "V" configuration with permanent lubrication. The gearbox is directly connected to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor. - Conveyor belt in U-beam, 24" wide canvas supported by 4 rollers in a V configuration with shielded rollers actuated by an electric motor. - Sieve with a screen for eliminating oversized materials. - Drum dryer and mixer with heat insulation, four driven support rollers made of high-carbon steel, driven by a gearbox, 15hp electric motor. - Rotational external mixer - Burner with fuel spraying via gear pump, Kcal/h - Dry filtering system consisting of a dust collection system - Control system: Sistex Further options and accessories: Control system, control room, dust filter/dust collector Further information: Intended use: Construction, Usable material: Asphalt, Overall condition: very good, Technical condition: very good, Visual condition: very good.

Condition: new, Year of construction: 2025, Multi-use, powerful, heavy and very massive segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding bench is characterized by the full segmentation over the entire working length of 1.40M. The upper and lower segments can be removed quickly and easily, and the bending beam is divided into segments. The bending angle is from 0 to 155 degrees. Lock with the pedal, the hands are free and you can easily position the sheet metal - open and close with your foot. The folding beam is connected to 2 gas pressure dampers, so the control with the folding beam is incredibly easy. Practical tool box on segments at the rear of the machine. Technical specifications: - Max. Working width; 1400mm - bending angle max. 160 degrees - Max. Sheet metal thickness (steel) 1.5mm - weight 300 kg - segment jaws width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles Knsdjc Swhyepfx Anuec -Gradscala Price: 5700 euros wheels incl. We are looking forward to your contact!

Condition: new, Year of construction: 2025, This model SGR-1400 is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability segmentback width 30,40,50,60,70 and 100 mm - three cheeks are equipped with segment jaws (full segmentation) -application for preset bending angles Technical specifications: - Max. Working width; 1400 mm - Bending angle max. 160 degrees Ksdpsc I T Txjfx Anuonc - Max. Sheet thickness (steel) 1.5mm - Weight 285 kg Price: 5.700 Euro

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 15,500 kg, maximum load weight: 10,425 kg, overall weight: 26,000 kg, tire size: 315/80 R 22.5, axle configuration: 3 axles, wheelbase: 5,200 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, number of beds: 1, Equipment: ABS, air conditioning, central locking, compressed air brake, crane, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, truck registration, | Mercedes-Benz Actros 2551 6x2-4LL Roll-off tipper | Palfinger Epsilon Q 150Z96 crane with scrap grapple | Palfinger Palift HT20ATEC hooklift system | Steerable lift axle | Automatic transmission, Euro 6, cooling box | Auxiliary heater, auxiliary air conditioning, cruise control | Internal control and remote control | Reversing camera | Retarder | Electric windows, electric mirrors | Trailer coupling | Subject to errors, typos, and prior sale. Kjdpfezf Ityjx Anuenc

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Knedpfxewauaxo Anujc

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 2,930 h, load capacity: 2,000 kg, lifting height: 3,670 mm, free lift: 105 mm, load center: 600 mm, mast type: duplex, construction height: 2,365 mm, battery model: PzS, battery capacity: 375 Ah, remaining battery capacity: 100 %, battery voltage: 24 V, fork length: 1,150 mm, fork width: 210 mm, fork thickness: 73 mm, Equipment: UVV, Linde L20 electric high-lift pallet truck – ready for immediate use Kjdpfezik R Nox Anuonc Linde L20 electric high-lift pallet truck in good condition for sale. The unit is equipped with a new traction battery and is therefore ready for immediate use. New battery Integrated charger Initial lift / ramp lift UVV / FEM 4.004 inspection certificate provided upon delivery Technically flawless Immediately available Inspection possible by appointment Transportation can be arranged, and loading on-site is possible. If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, Due to the closure of a warehouse, our client has a number of shelves, lockers, a drill press, a forklift, etc., available. Knsdez Unq Ajpfx Anujc Some images can be seen here; more are available upon request. Collection is possible in week 46 in Berlin.

Condition: used, functionality: fully functional, power: 15 kW (20.39 HP), fuel type: diesel, empty load weight: 1,800 kg, Year of construction: 2000, operating hours: 4,182 h, drive type: Diesel, Mini excavator Condition: Ready for use and fully functional Technical condition: good Kodpe Aa Hbiefx Anuenc Description: Mini excavator KUBOTA KX41-2 VC - - Year of manufacture 2000 - - 4182 operating hours - - 1800 kg operating weight - - like-new Powertilt MS 01 (year of manufacture 2023) - - mechanical quick coupler - - 2 used digging buckets 25 + 50 cm - - 1 used ditching bucket 100 cm - - - HYDRAULIC ADJUSTABLE UNDERCARRAGE 100 - 130 cm - - - work lights - - 3-cylinder Kubota diesel engine 15.3 kW (20 hp) - - NEW, complete service performed - - some pins and bushings new - - like-new Powertilt - - swivel joint NEW - - good rubber tracks Quick coupler, buckets, 3rd control circuit, work light rear, work light front, heater, fully enclosed cab

Condition: used, functionality: fully functional, power: 11 kW (14.96 HP), fuel type: diesel, empty load weight: 1,860 kg, Year of construction: 2012, operating hours: 2,810 h, Equipment: rubber tracks,

Condition: new,

Condition: excellent (used), Code: 0005 Brand: OMMA / OTHER BRANDS 2300 Model: 2300 Nr 2 rubber-coated rollers Technical data Length mm 2300 Diameter mm 230 Kedpoiyqdvjfx Anuonc Rifling 3,4 x 1 cm / 9 x 1" (inch) Overall dimensions of wooden crate for 2 rollers: mm 3000 x 900 x 550 h Weight kg 800

Condition: good (used), The scope of delivery includes: 198 used deep-web joists Material color: Sendzimir galvanized Total length: approx. 1,110 mm Suitable for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: C 70 x 50 x 15 mm Crossbeam support: approx. 50 mm Knsdpfelhp Tcex Anusc Weight/piece: approx. 3.02 kg Note: The unit price only applies to a minimum order quantity of 198 pieces (1 pallet).

Condition: new, Year of construction: 2027, Recirculating air chamber oven, electric, new unit, delivery time 17-18 weeks -Temperature 300°C -Internal dimensions W x D x H: 1500 x 3000 x 2000 mm -External dimensions W x D x H: 2410 x 3560 x 2730 mm -Volume: 9000 liters -Control system: Eurotherm Nanodac, 100 programs with 25 segments each -Additional 100 programs can be saved/loaded via FTP or a USB flash drive -2 recirculating air fans -Double door with safety door sensors -Over-temperature protection, Eurotherm 3216i -Control system/recorder with color touch display -Stable steel construction, anthracite exterior -Motorized dampers -Electrical version: 400 V / 50 Hz / 3NPE -Increased heating capacity: approx. 70 kW -Guide rails, recess for driving in a trolley -Documentation, CE declaration of conformity Knsdpfxolkb Ezj Anujc -Electrical wiring diagram with spare parts list We will gladly offer transport, installation, and training for your employees. As a new unit, it is also available with an exhaust fan and other equipment! Delivery time approx. 10-12 weeks. Please contact us! We offer new and used industrial ovens, which we can also modify and supplement according to customer requirements. Inspection in our machine hall is possible at any time by appointment. Oven, ovens, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, recirculating air oven, chamber oven, heating oven, chamber recirculating air oven, annealing oven, tempering oven.

Condition: new, The scope of delivery includes: 01x stage support, new Manufacturer: SSI Schäfer design: corner connection / 90 suitable for CS Sigma profiles with a profile height of 300 mm type of screw connection: internal Material color: sendzimir galvanized Technical data of the stage support: Knodpfx Ansmv Dyzeujc Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm