Used Pgcnc 2030 Atc 5X for sale (2,196)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4000x2300x2100 mm Bodpfx Akov A E Tvs Hjdb Weight 2300 kg Total power requirement 21 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3800x2300x2100 mm Weight 2000 kg Bdodpfx Akjv A E Tpo Heb Total power requirement 19 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3300x2250x2100 mm Weight 2000 kg Total power requirement 19 kw Bdodpfx Aov A E Tcsk Hjb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1000 kg Total power requirement 15 kw Bdodpfx Akev A E Sxo Hsb

Condition: used, Year of construction: 2017, machine/vehicle number: 172822005, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 60 kVA, controller manufacturer: Heidenhain, controller model: TNC530i, rotary table diameter: 500 mm, overall weight: 9,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 6,940 h, coolant supply: 20 bar, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, We are offering this used Microcut 5-axis MCU-5X vertical machining center, year of manufacture 2017. Model: MCU-5X Serial number: 172822005 Power: 60 kVA Frequency: 50 Hz Weight: 9,000 kg Rated voltage: 400 V Number of phases: 3 + PE Rated current at full load: 100 A Short-circuit capacity: 25 kA Maximum load current: 200 A Bdjdpfxjykiwlj Ak Hsb Fuse protection / rated current: 80 A Date of manufacture: May 2017 + Chip conveyor If you have any questions or require further information, feel free to send us a message or call us.

Condition: new, Year of construction: 2026, Technical data: Control system: Multiaxis real-time interpolator with active trajectory prediction, LAN communication, EtherCat protocol, sampling time under 1ms, correction map, RTCP, remote service access. Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1200 mm Drive system: Omron servo drives with EtherCat protocol, X and Y axes equipped with helical, hardened and ground racks, precision class 6; Z axis with ball screw, precision class 5. Linear bearings: Bosch Rexroth 35 Travel speed: X, Y axes up to 45 m/min; C, A axes up to 6000 degrees/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: Dual-sided master/slave configuration with gantry angle correction Electrospindle: 8 kW to 36 kW Print heads: - G.12 with throughput up to 12 kg/h - G.20 with throughput up to 20 kg/h - G.50 with throughput up to 50 kg/h - G.200 with throughput up to 200 kg/h Maximum spindle speed: 24,000 rpm (options for 6,000, 40,000, or 50,000 rpm) Construction: Welded, ribbed, stress-relieved, and precision machined steel frame Table type: Vacuum, hybrid, steel T-slot, aluminum T-slot, aluminum vacuum with M16 or M18 holes Optional features: - Tool cooling - Linear or rotary tool magazine Bdjdpfx Astz Sgisk Hjb - Rotary axis on the table - Laser scanner - Positioning bases - Oscillating unit - 5-axis software package Granulate 3D printers can process a wide range of thermoplastics, such as PLA, ABS, PETG, polyamides, or polypropylene. #ploter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

Condition: good (used), Year of construction: 2003, 5X PIECES handling devices Bedpfx Akelwqrho Hedb Geiger Type: EA-Mini 2001 SLI Year of manufacture 2001

Condition: used, Year of construction: 2002, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Bdsdpfx Akox E Tmbe Hsb Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: used, mileage: 2,21,330 km, power: 105 kW (142.76 HP), first registration: 12/2016, fuel type: diesel, empty load weight: 2,480 kg, maximum load weight: 1,020 kg, overall weight: 3,500 kg, tire size: 235/65R16C, axle configuration: 4x2, wheelbase: 4,325 mm, next inspection (TÜV): 03/2023, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,350 mm, loading space width: 2,060 mm, loading space height: 2,100 mm, Equipment: ABS, cabin, central locking, electronic stability program (ESP), onboard computer, power assisted steering, traction control, Vehicle location: Bovenden, license plate house, electric mirrors, heated mirrors, electric window left, electric window right, switch 6, ABS (anti-lock braking system), traction control (ASR), leaf suspension, doors, lashing rails, U-protection, environmental badge green Wheelbase: 4325 mm Body: Spier box body with double wing door ESP, rear spring harder, stabilizers HA reinforced, stabilizer reinforced on front axle, spring and damper front reinforced, lockable glove compartment, 6-speed manual gearbox ECO Gear, seat belt warning system for driver's seat, crosswind assistant, shift point indicator, adaptive brake lights, daytime running lights, driver airbag, smoker's package. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bdedpfx Aovhkbpsk Hjb - .

Condition: used, mileage: 1,92,780 km, power: 95 kW (129.16 HP), first registration: 04/2016, fuel type: diesel, empty load weight: 2,470 kg, maximum load weight: 1,030 kg, overall weight: 3,500 kg, tire size: 235/65R16C, axle configuration: 4x2, wheelbase: 4,325 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 4,350 mm, loading space width: 2,060 mm, loading space height: 2,100 mm, Equipment: ABS, cabin, central locking, electronic stability program (ESP), onboard computer, power assisted steering, traction control, Vehicle location: Bovenden, license plate house, electric mirrors, heated mirrors, electric window left, electric window right, switch 6, ABS (anti-lock braking system), traction control (ASR), leaf suspension, doors, lashing rails, U-protection, environmental badge green Wheelbase: 4325 mm Body: Spier box body with double wing door ESP, rear spring harder, stabilizers HA reinforced, stabilizer reinforced on front axle, spring and damper front reinforced, lockable glove compartment, 6-speed manual gearbox ECO Gear, seat belt warning system for driver's seat, crosswind assistant, shift point indicator, adaptive brake light, daytime running lights, driver airbag, smoker's package. The vehicles have each run between 160,000km and 195,000km! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bdjdpfsvhkbcjx Ak Heb - .

Condition: used, mileage: 1,85,704 km, power: 105 kW (142.76 HP), first registration: 12/2016, fuel type: diesel, empty load weight: 2,480 kg, maximum load weight: 1,020 kg, overall weight: 3,500 kg, tire size: 235/65R16C, axle configuration: 4x2, wheelbase: 4,325 mm, next inspection (TÜV): 02/2023, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,350 mm, loading space width: 2,060 mm, loading space height: 2,100 mm, Equipment: ABS, cabin, central locking, electronic stability program (ESP), onboard computer, power assisted steering, traction control, Vehicle location: Bovenden, license plate house, electric mirrors, heated mirrors, electric window left, electric window right, switch 6, ABS (anti-lock braking system), traction control (ASR), leaf suspension, doors, lashing rails, U-protection, environmental badge green Bodpfevhkbisx Ak Hjdb Wheelbase: 4325 mm Body: Spier box body with double wing door ESP, rear spring harder, stabilizers HA reinforced, stabilizer reinforced on front axle, spring and damper front reinforced, lockable glove compartment, 6-speed manual gearbox ECO Gear, seat belt warning system for driver's seat, crosswind assistant, shift point indicator, adaptive brake light, daytime running lights, driver airbag, smoker's package. The vehicles have each run between 160,000km and 195,000km! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, operating hours: 682 h, mileage: 682 km, power: 21 kW (28.55 HP), first registration: 07/2018, overall weight: 1,750 kg, fuel type: diesel, color: blue, axle configuration: 4x4, maximum load weight: 870 kg, empty load weight: 880 kg, next inspection (TÜV): 06/2026, wheelbase: 1,300 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 1, Equipment: additional headlights, all wheel drive, cabin, power assisted steering, soot filter, * German vehicle from municipal ownership * At 617 operating hours, over €30,000 was reinvested, among others in the engine, hydraulics, front broom, and suction system. Invoices for all work available. * 1 owner * only 682 original operating hours * TÜV valid until 06/2026 * Condition: see photos * Very rare, the Iseki VITRA 2030 with a 4-brush system & a leaf vacuum at the rear * Fully hydraulic 4x4 all-wheel drive * The ISEKI-VITRA series is a sweeper-suction combination for outdoor cleaning of pedestrian and cycle paths, courtyards, parking lots, etc. * Sweeping width adjustable from 1,200 mm to 2,000 mm * With only one meter external width (models 2030/2040), you can easily pass through narrow entrances and also work on narrow paths. Thanks to the compact width, you can utilize the machine's full capacity with attachments from as little as 1.10 m working width. * The practical, standard leaf suction hose extends your range – especially in hard-to-reach spots * The powerful suction system operates almost dust-free even without a filter. It has a volume of 500 L and is hydraulically tipped at a height of 1.35 m. The integrated hand suction is ready for use without tools in seconds. * ISEKI-VITRA articulated steering units combine the technical advantages of a municipal tractor with the multifunctionality of a tool carrier in one machine. Exceptional maneuverability and a robust build quality offer the operator key technical advantages for efficient operation 365 days a year. The outstanding performance is evident in sweeping applications. * The suction hose is protected from damage by guide rollers when driving over obstacles. Manufactured in robust metal, it clearly outperforms the commonly used plastic designs. If a new TÜV inspection is required, we would be pleased to provide an offer from one of our partner workshops. Bdodpjxfh Azefx Ak Hsb Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. For more trucks, please visit our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend inspection and testing of the goods so that the buyer does not have any misconceptions about condition and suitability. Viewing and testing are possible at any time by appointment and are expressly encouraged. All information is supplied without guarantee. We do not accept liability for errors or inaccuracies in the offer. The buyer is obliged to independently satisfy themselves of the condition and specification of the goods/vehicles. Subject to change, prior sale, and errors.

Year of construction: 1990, condition: used, Manufacturer : Dumoulin Model: 5X Year: 1990 Type : Tablet coater / Drum coater Drum diameter : Ø 50 cm Total volume : 65 L Emptying / removal : frontal Bdjdpox R A Raefx Ak Hjb Spraying and cleaning nozzles Light for inside Temperature sensor Watson Marlow 313S peristaltic pump Gerbhardt and Ebmpapst ventilation and suction Mobile chasis: 4 wheels  

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3300x2100x2100 mm Bsdpfsv A E S Sex Ak Hjdb Weight 2000 kg Total power requirement 19 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 7000x2300x2100 mm Weight 3200 kg Total power requirement 28 kw Bodpfxov A E T Ae Ak Hedb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5800x2250x2100 mm Weight 2900 kg Total power requirement 24 kw Bsdpfx Ajv A E Tijk Hsdb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 7000x2900x2100 mm Weight 4500 kg Total power requirement 35 kw Bdsdov A E Ugepfx Ak Hsb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3800x2900x2100 mm Weight 2500 kg Total power requirement 28 kw Bdodev A E T Nepfx Ak Hob

Condition: new, Rexroth VT-SRXX Analog amplifier VT-SR11-12/11/4WRD32-5X unused in opened OVP 100 % functional Bjdji Ec A Eopfx Ak Hjdb

Condition: ready for operation (used), Grundfos SPK4-15 / 5X A-W-A-CVUV submersible pump SN:64410798602 with MG71A2-14F85-B motor, used, normal signs of use, 100% functional, scope of delivery as per photos Bjdpelcf N Eofx Ak Hodb

Condition: ready for operation (used), SEW Eurodrive WPU 2030 pole-changing switch for pole-changing motors used 100 % functional Bjdpfei Ec Uhox Ak Hsdb

Condition: used, Year of construction: 2009, faceplate diameter 1250 mm turning height 1250 mm Control 0i-TD Fanuc max. torque at faceplate 12500 Nm max. turning diameter 1600 mm Bdjdjwlvifjpfx Ak Heb max. workpiece weight 5000 kg table speed 2- 300 min/-1 x-axis 1475 mm z-axis 900 mm rapid traverse 10 m/min spindle cone ISO BT50 tool capacity 12 pos. total power requirement 75 kW weight of the machine ca. 32 t dimensions of the machine ca. 4,7 x 5,8 x 5,5 m CNC vertical lathe with 12 positions ATC. Spindle reception is BT 50. Control: Fanuc 0i-TD

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: V16TC1548, workpiece weight (max.): 8,000 kg, workpiece diameter (max.): 2,000 mm, faceplate diameter: 1,600 mm, workpiece height (max.): 1,350 mm, faceplate torque: 18,000 Nm, TECHNICAL DETAILS Faceplate diameter: 1,600 mm Maximum faceplate torque: 18,000 Nm Maximum thread milling diameter: 1,800 mm Maximum facing diameter: 1,800 mm Maximum distance between the faceplate and the clamping surface of the inserted tool slide: 1,550 mm Slide dimensions: 220 × 220 mm Maximum workpiece diameter: 2,000 mm Maximum slide stroke: 900 mm Maximum workpiece height when using the 200 mm tool holder: 1,350 mm Maximum workpiece weight, depending on faceplate rotation: 8,000 kg Maximum tool shank diameter: 40 mm Maximum crossrail travel: 800 mm Crossrail feed rate: 170 mm/min Working feed rate: 1–2,000 mm/min Rapid traverse: 10,000 mm/min Feed per revolution: 0.001–50 mm/rev Rotating tool spindle speed, programmable in two ranges 1st range: 1–1,200 rpm 2nd range: 1,200–2,400 rpm Tool holder: ISO50 MACHINE DETAILS Bsdpexvxrbofx Ak Hedb Total power requirement: 80 kW Dimensions & Weight Footprint approx.: 4.4 x 4.62 m Machine weight approx.: 25 t EQUIPMENT C-axis

Year of construction: 2023, condition: new, PLASMA PLOTTER MODEL MTX 2030 Construction: steel+aluminum Working field: 3000/2000/200 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Linear guides: HIWIN IGUS guideway Automatic material detection system Power supply: 240V Permissible load: 2000kg Total weight: 800kg net USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system Hiwin wire guides Double-sided gate drive: X-axis stepper motor and gear rails Y axis stepper motor and toothed rails Z axis stepper motor and ball screw Drives realized with Hiwin brand rails Table equipped with water grate- (Water table, giving cleaner cutting, material cooling and reducing gas emission during machining) INCLUDED: -water table -interchangeable grate -control software in Polish -Declaration of Conformity CE - DTR - warranty. -start-up and training included in the price The latest control system available in our plotters: Bdedenfu Tlspfx Ak Hsb Integrated THC height controller Anti-diving torch function Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap) Integrated CAM module: MyMini CAM -. Automatic object recognition Ven. External. Path analysis in advance Cutting parameter database Correction of design angle to material Ability to cut from any point Possibility of cutting from the end DXF,PLT import Automatic generation of paths with offsets, entries and exits The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to material angle Soft and Hardware limits THC anti-diving functions Game pad control capability Material detection by touch system, floating head WHY IT'S WORKING WE ARE POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC) PROFESSIONAL GUIDE RAILS OF RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.

Condition: used, Year of construction: 2011, Scissor Lift - JLG 2030 ES Manufacturer: JLG Model: 2030 ES Year of Manufacture: 2011 Technical Specifications Working Height: 8.10 m Platform Height: 6.10 m Platform Length: 2.24 m Platform Width: 0.69 m Total Weight: 2,020 kg Length: 2.30 m Width: 0.76 m Clearance Height: 2.20 m Basket Capacity: 360 kg Stabilizers: None Drive: Electric Special Features Platform Extension: 0.90 m with 360 kg capacity Suitable for indoor and outdoor use (outdoor operation: max. 1 person, 160 kg) Bedoxfi D Hopfx Ak Hjdb Non-marking tires Foldable guard rails, height 1.81 m Driving License Class: 3/B Service/Inspection Status TÜV: Not required UVV Safety Inspection: valid until 11/2025 Mileage: Not applicable Operating Hours: 495 hours as of 04/2025 Price indicated excluding statutory VAT. Are you interested? We are always at your disposal! You can reach us Monday - Friday from 7:00 am to 4:00 pm. Subject to change and errors!