Used Primultini 1300 Re for sale (13,314)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 700 mm, total width: 2,000 mm, total height: 1,350 mm, type of input current: three-phase, input voltage: 380 V, working width: 1,300 mm, The DRM model offers the most economic single roller coater for smaller or start-up companies looking to oil wooden floorboards. This machine is specifically designed for the application of oil and glue. The machine is fully operational without any functional defaults. The machine comes with two new glue trays. Hnedexdxf Rjpfx Ah Sjt Contact us for a quote, or visit our Test Center for a free demo.

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for thermoplastics processing and is equipped with a complete plasticizing unit in a version with abrasion protection. Technical specifications Clamping unit - Clamping force: 13,000 kN - Mold opening force: 910 kN - Dimensions of mounting platens: 2210 × 1910 mm - Tie bar spacing: 1570 × 1270 mm - Ejector stroke: 350 mm - Ejector force: 250 / 125 kN Injection unit - Screw diameter: 105 mm - Injection pressure: 2296 bar Hedpfsyrrwkex Ah Sent - Injection volume: 5195 cm³ - Shot weight for PS: 4728 g - Injection rate: 856 cm³/s Plasticizing parameters - Screw speed: 103 / 145 rpm - Plasticizing throughput (PS): • standard speed: 122 g/s • increased speed (option): 171 g/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Installed heater power: 71 kW - Number of barrel heating zones: 7 - Dry cycle time according to Euromap 6: 765 cycles/h - Oil tank capacity: 2440 l Dimensions and weight - Net weight with control cabinet: 70 tons - Installation dimensions: 13.03 × 3.65 × 2.82 m

Condition: used, loading space length: 1,02,400 mm, loading space width: 25,100 mm, loading space height: 20,900 mm, total width: 26,000 mm, total height: 35,700 mm, Year of construction: 2012, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear Hsdpfx Asy Ivrrjh Ssnt - Air suspension, front - Disc brake system = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at ...). Schmitz SKO10 refrigerated semi-trailer Refrigeration: Carrier Maxima 1300, Tail lift: BÄR BC 2000 S4-C3 (2,000 kg), Additional headlights at the rear of the vehicle, Air suspension, SAF axle, Disc brake, Spring brake, Wabco ABS, Smartboard, Steerable axle, Cargo area dimensions: Length: 10,240 mm, Width: 2,510 mm, Height: 2,090 mm, Tire tread: 1st axle 12-17 mm, Permissible total weight: 22,000 kg, Tare weight: 6,610 kg, Payload: 15,390 kg Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. Further information can be found on our website. ... Errors, changes, and prior sale are subject to change!!! Steerable axle = Further Information = Tare weight: 6,610 kg Payload: 15,390 kg GVW: 22,000 kg Please contact Tobias Ebert for further information.

Condition: like new (used), Year of construction: 2020, Console milling machine Reckermann 1300 Kombi Hnedex A Etfjpfx Ah Sst The machine is in absolutely mint condition. The customer did not receive the parts for which the machine was intended.

Condition: like new (used), Year of construction: 2025, operating hours: 8 h, functionality: fully functional, total length: 700 mm, total width: 2,000 mm, total height: 1,350 mm, type of input current: three-phase, input voltage: 380 V, working width: 1,300 mm, The DRM model offers the most economic single roller coater for smaller or start-up companies looking to oil wooden floorboards. This machine is specifically designed for the application of oil and glue. With just 8 operating hours, this machine is as good as new. Hnjdpfx Ajxdxaboh Set Contact us for a quote, or visit our Test Center for a free demo.

Condition: new, empty load weight: 640 kg, maximum load weight: 660 kg, overall weight: 1,300 kg, loading space length: 3,000 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 195/55r10c, Stable and high-quality sales trailer as a platform trailer for food or merchandise. Our food trailers from the *SELLERH* series are manufactured with an insulated sandwich panel structure. The robust steel frame is welded and hot-dip galvanized, which ensures high stability. A lockable steel door, *not made of plastic*, is installed in the door. The *body* is made of 25 mm polyester sandwich panels in white. The *car trailer* has four crank supports for lifting the *food truck*. Thus, it is an affordable *car trailer* for the *market*, *food stall*, *cocktails*, *fast food*, *non-food items*, *street food*, *merchandise*, and much more. Here is an overview of the standard equipment of our sales trailer: *Entrance door with lockable pedestrian door*, *step on the drawbar*, *sales flap on the right* with lifting aids, lockable from the inside, electrical distribution, robust *crank supports*, *sandwich panel structure* 25 mm, white exterior, maneuvering handles, support wheel with holder, robust *welded frame*, and a very stable V-shaped drawbar, hot-dip galvanized. As accessories for our *sales vehicles*, we offer additional *flaps*, *tarpaulins*, *pocket shelves*, sales counters, cabinets, sinks, *PVC flooring*, *100 km/h shock absorbers*, and *trailer lock*. --- You can find all our cost-effective offers on our website. Hsdpfx Aeiigb Ush Sent Germany-wide delivery possible (except for islands)! Please feel free to ask us for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Collection times: Monday - Friday – [Time] Collection is not possible on Saturdays!

Condition: new, Year of construction: 2022, I sell a spindle moulder Primultini. Strong cast iron cutter in excellent condition. Shaft diameter 35mm. Available immediately. Hnedpfx Aoyc N Dijh Sot

Condition: excellent (used), Schunk Here we offer you a material separator. Technical data: External dimensions: Width: 1325 mm Hsdpfx Aezd Sq Tjh Sjnt Control panel width: 565 mm Depth: 1300 mm Shuttle overhang: 730 mm Height: 1870 mm Light column overhang (top): 350 mm Operator height: 900 mm Speed: X, Y: Linear motor axes 2000 mm/s Z: Linear motor axes 1000 mm/s Weight: approx. 1500 kg. Accuracy Repeatability: 0.02 mm Positional accuracy: 0.02 mm Separation accuracy: 0.10 mm with vision system 0.15 mm without vision system Working area Max. separation area X, Y: 430 mm x 350 mm Max. material size X, Y: 430 mm x 350 mm LP thickness: 0.5 - 3.2 mm Supply 400V / 50 Hz / 16 A Condition: used Type: SAR-1300 B Scope of delivery: As shown in the picture (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, for lacquered, high-gloss furniture fronts Front size: minimum 180 x 90 x 10 mm, maximum 4000 x 1300 x 50 mm Maximum workpiece weight: 80 kg One tool head Front shape: Rectangle with automatic size and thickness detection, no setup time required Fast sanding and polishing of high-gloss furniture fronts and Corian® Optimal, homogeneous high-gloss surface Low running costs due to standard sanding and polishing agents Easy to operate / self-assembly possible Length: 2500 mm, width: 1790 mm, height: 1500 mm Frame height: 960 mm ± 25 mm Hnodozzdmzopfx Ah Set Machine weight: 1000 kg Connection data: 400V / 4.0 kW / 5 bar

Condition: good (used), axle configuration: 3 axles, first registration: 08/2008, suspension: air, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS - Rear doors Hjdpfjxhcymsx Ah Ssnt - Lift axle - Air suspension = Further Information = Axle Configuration Suspension: Air suspension Rear axle 1: Lift axle Weights Unladen weight: 8,850 kg Payload: 29,150 kg Gross vehicle weight: 38,000 kg Functional Refrigeration unit engine: Diesel and electric Condition Technical condition: good Visual condition: good Warranty Warranty: No liability for printing & typographical errors, subject to alterations, prior sale and mistakes! Further information Contact Emad Al Shogran for more information. Vehicle number: Semi-trailer. 25 SOR Maxima 1300 / Lift axle / 3 x Axle PBW .: VVCS0RXBCS4803284 Lift axle PBW Carrier Maxima 1300 Diesel + electric Unladen weight: 8850 Gross weight: 38000 Internal dimensions Length: 13.40 m Width: 2.50 m Height: 2.65 m Refrigeration unit brand: Carrier = Company Information = No liability for printing & typographical errors, subject to alterations, prior sale and mistakes! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Mrs. Sabine Faust Email:

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, We offer you: CNC machining center, universal, with robotic automation Manufacturer: DMG MORI Type: DMU 50 3rd with Lang RoboTrex52 Year of manufacture: Machine 2017 / Automation 2021 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm Hodpfx Ahoz A A E Ne Sont B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 60 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 32,000 h Spindle hours: approx. 12,000 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter - Tank 600 l - Canopy - Rotary feedthrough in spindle center - Compressed air through the spindle center - Flushing gun - Oil and emulsion mist separator, mechanical - Infrared measuring probe, manufacturer Heidenhain TS 649 (if available) - Preparation for 3D quickSET - Operating mode 4 - ATC – Application Tuning Cycle - Tool breakage monitoring TRS2 (if available) - Tracy surface interpolation - Automation system Lang RoboTrex 52 Accessories, tools, and clamping devices shown in the images are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Hedpfxet Dx U Sj Ah Sont Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners Hodez Ai Tpopfx Ah Sjnt - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, mileage: 6,49,000 km, power: 390 kW (530.25 HP), first registration: 03/2018, fuel type: diesel, overall weight: 23,900 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, axle: 11500 kg * Wheelbase: 405 cm * Cab: Yes * Price on request: Yes * Position | First axle: Front * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Parabolic springs * Steering | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Reduction | Third axle: Single reduction * Lift axle | Second axle: Yes * Twin tires | Third axle: Yes * Driven | Third axle: Yes * Differential lock | Third axle: Yes Additional features: * 2 pedal control * 27 MC / CB * Airbags * Aluminum fuel tank * Fifth wheel coupling * Anti-lock Braking System (ABS) * Anti-slip regulation (ASR) * Automatic transmission * Heated mirrors * Roof spoiler * Differential lock * Double fuel tank * Electric windows * Electronic Braking System (EBS) * ESP * Homepage * Intarder * Air conditioning * Refrigerator * Leather seats * Air suspension * Air-suspended seats * Fog lights * Parabolic suspension * Particulate filter * Radio/CD player Hnedpfxsz A Nuqj Ah Sst * Retarder * Disc brakes * SemCollection * Auxiliary heater * Central locking Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | We kindly request you to inquire in advance about the costs and procedures applicable in your country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Condition: ready for operation (used), Primutini bombing machine Hnjdpfxjwt Nxpj Ah Sjt

Condition: excellent (used), first registration: 11/2008, loading space length: 13,340 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, color: white, Year of construction: 2008, = Additional options and accessories = - Rear doors = Remarks = YB4A010138L037286 Cool unit brand: Carrier Hodpfx Ahsymq Evo Ssnt = More information = Make of bodywork: CARIER MAXIMA 1300 Cooling engine: diesel and electric Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), functionality: fully functional, machine/vehicle number: A4EX021000228, number of ink cartridges: 2, color channels: 1, number of print heads: 2, resolution (max.): 1,200 dpi, paper weight (min.): 40 g/m², paper weight (max.): 350 g/m², paper width (min.): 35 mm, paper width (max.): 324 mm, paper height (min.): 139 mm, paper height (max.): 483 mm, number of feeding trays: 5, total length: 5,700 mm, total width: 1,000 mm, total height: 1,800 mm, space requirement length: 6,700 mm, space requirement width: 3,000 mm, space requirement height: 2,000 mm, counter reading (black): 1,40,69,576, year of last overhaul: 2026, input current: 20 A, input voltage: 230 V, Equipment: auto duplex, raster image processor, Due to underutilization, a Konica Minolta bizhub PRESS 2250P, a high-performance printing press with two printing units, is now for sale. It features two roller paper trays and three vacuum paper trays, a re-wetting unit, an inserting unit, and a high-performance stack delivery system, plus two small delivery carts. The two printing units enable duplex printing in a single pass, resulting in almost double the speed compared to machines with a single printing unit. It is currently covered by a comprehensive, active service agreement and has been continuously maintained by Konica Minolta. Hsdpfx Aez Aikzeh Sjnt

Condition: good (used), Rotary table Manufacturer: Schuma Stock number: 2960-2 Year of manufacture: 2014 Type: DR-1300 Machine number: Diameter: 1,300 mm Rotational speed: adjustable Connection: 0.17 kW Dimensions: 1,800 x 1,300 x 800 mm Weight: approx. 80 kg Condition: needs to be reconnected, cables have been cut Hnjdpfozwxwtjx Ah Sot Sold at a special price in its current condition.

Condition: excellent (used), Year of construction: 2020, clamping force: 300 kN, Clamping force: 300 t Screw diameter: 60 mm Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Type: Horizontal Drive: Hybrid Hodpfxoyfh Rmj Ah Sont Hours: 23000 core puller 1 pneumatic core puller controll euromap 67 2 servo pumps. machine is without robot and accessories.

Condition: used, Year of construction: 2014, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are Hsdpfx Ahexrb Rfo Ssnt inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: good (used), mileage: 6,17,982 km, power: 290 kW (394.29 HP), first registration: 04/2014, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: airbag, crane, cruise control, trailer coupling, = Additional options and accessories = - Additional steering axle - High Beams - Power take-off (PTO) - PTO - Sleeping cabin - Speed limiter = More information = Axle configuration Front axle: Tyre profile left: 50%; Tyre profile right: 50% Rear axle 1: Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Lift axle; Steering; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 16.700 kg Carrying capacity: 9.300 kg GVW: 26.000 kg Functional Make of bodywork: Palfinger PK 34002-SH-C Condition Technical condition: good Visual appearance: good Financial information Price: On request Identification Registration number: 83-BDT-9 Hnjdszucn Dopfx Ah Sjt = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, functionality: fully functional, Manni shelving press for veneering, 2500×1300 Shelf length: 2500 mm Shelf width: 1300 mm Hnjdpfszmh Ndox Ah Sjt Feed height: 410 mm Working pressure: 300 bar Press with 4 cylinders

Condition: used, machine/vehicle number: 006290, Max working width: 1300 mm Max. machinable height: 100 mm No of Rollers: 4 Hnsdeu A Evhjpfx Ah Sst

Condition: like new (used), STA Impianti RE-5 coffee roaster, made in Italy, with a capacity of 5 kg per batch (production of up to approx. 20 kg/h). Machine in excellent condition and working order; very lightly used. Specifications: -Brand: STA Impianti (Italy) -Model: RE-5 -Capacity: 5 kg per batch -Fuel: LPG -Integrated cooling system -Cyclone/chaff collector included -Full control panel Perfect working order Ready to use Ideal for: -Micro-roasteries -Specialty coffee -Artisanal roasting projects -Coffee shops Hnedjzla Aaepfx Ah Set

Condition: used, Year of construction: 2012, functionality: fully functional, Fully refurbished, 12 months warranty -Unit on base frame -Maximum temperature: 1300 °C -Oven chamber volume: 120 liters -Oven chamber: 500 x 500 x 500 mm (W x D x H) -Control cabinet separate -Eurotherm 3504 -Parallel swing door for opening in the hot state -Slot in the oven collar, bottom right (for retrofitting CO2 and N2 gas supply in a gas supply box, not included!) -Power: 15 kW -Connection: 400V 3/N/PE 50 Hz -Weight: 410 kg -Documentation, CE declaration Hnsdpfoyn Emqjx Ah Sst Oven, furnaces, industrial oven, muffle furnace, heat treatment oven, chamber furnace