Used Production Of Staples for sale (19,029)

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB IRB2600-12/1,85 Demo Robot 2019 Full of options +-7 hours DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Nedexq Ttiepfx Akfela

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 452 year of construction 1996 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm distance spindle nose to table 185 - 685 mm table size 490 x 400 mm Spindle speed 50 - 500 rpm. Stepless Drill slide feed rate 20 - 224 mm/min. Stepless Drill slide rapid traverse 4.5 m/min. Motor power feed 0.18 kW Motor power rapid traverse 0.75 kW Motor power drilling spindle 1.1 kW (speed 1000 rpm) Nedpfoikrtqjx Akfela Mains connection 400 volt, 50 Hz - Spindle speed infinitely variable via frequency converter - Drill slide feed infinitely variable via frequency converter - 2 operating modes set-up and automatic mode - central lubrication - control cabinet at the back of the machine - swivelling control panel - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 1000 kg. good condition

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 449 year of construction 1995 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm spindle distance max. 685 spindle distance min. 185 table size 490 x 400 mm spindle speed 2000 rpm autom. feed 224 mm/min. rapid traverse 4,5 m/min. motor power feed 0,18 kW motor power rapid traverse 0,75 kW motor power drilling spindle 1,5 kW Mains connection 400 Volt, 50 Hz - Prduction drilling machine with spindle speed and feed rate - actual spindle speed 2000 rpm. - actual feed speed 224 mm/min. - 2 operating modes manual and automatic - electric drill head height adjustment - central lubrication Nljdpsgd Ipksfx Akfoa - control cabinet at the rear side of the machine - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 900 kg good condition

Condition: used, Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small-scale window manufacturing consisting of: ----- 1) Haberkorn FZS1 slotting machine. Price: €12,500 2) Okoma SF3F table milling machine with glazing bead saw. Price: €4 Oertli tooling for the Haberkorn and Okoma machines. Price: €7,500 1 set of wooden windows IV 68/78/88 and 1 set of wood-aluminum windows IV 68/78, manufactured in 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. Price: €7 (Hardware can be converted for an additional charge upon request!) ----- Technical Manufacturer's Description: - Haberkorn FZS1 slotting machine with automatic feed, - Stepless height adjustment D 40 mm Crosscut saw: - Spindle arrangement: top - Three-phase motor: 3 kW Nsdoxa Hi Nepfx Akfjla - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Pneumatic horizontal positioning, manually adjustable - Guard and dust extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Working length: 252 mm - Maximum tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via Precision ball screws - Guard and dust extraction hood with extraction port diameter: 180 mm - Automatic brake with speed monitoring Studio table: - Swivel range +/- 65 degrees - Automatically changing counterweight (programmable) - Pneumatic clamp - High-precision electric degree indicator - Automatic length compensation - Counterweight at every angle setting in the cutting plane Optional equipment: - Laser for workpiece positioning - Pneumatic saw position - Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools - Dust extraction ports 2 x 120 mm - Spindle length 270 mm - Counter gauge with fine adjustment and turret - Triple stroke, maximum stroke height 90 mm - Glass strip cutting saw with protective and extraction hood, 80 mm diameter - 8-roller feed unit with stand and hold-down arm, required for the glass strip cutting saw attachment - Pneumatically controlled dispensing unit for edge drive, speed 6000 rpm - 2 x 3 kW motors - Mounting diameter 30 mm ----- 3) Oertli tools for Haberkorn and Okoma machines - 1 set of wood window IV 68/78/88 - 1 set of wood-aluminum window IV 68/78 Tools are sold in the condition, scope, and with accessories as currently available in our stock. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems mentioned and drawn. [Note regarding window cuts, tool drawings, and tool system listings:] ----- 4) Götzinger OBM Plus Corner Hinge and Olive Drilling Machine -Corner and scissor hinges + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x Olive drill head 24 mm -1x Double-head corner hinge -Maco MultiMatic fitting -1x Adjustable flip stop, left, with 6 stops -1x Adjustable flip stop, right, with 6 stops -1x Machine stand complete with storage tray -220/400 V, 60 Hz, 1.3 kW -1x Roller conveyor appr...

Condition: used, Year of construction: 2006, machine/vehicle number: 105554, We offer this used Weinig Conturex window production line, year of manufacture 2006. Machine number: 105554 Machine type: Conturex Year of construction: 2006 Circuit diagram number: FP 3013 Supply voltage: 3×400 V Supply frequency: 50 Hz Control voltage: 230 V Control frequency: 50 Hz Control voltage: 24 V Control frequency: 0 Hz Main fuse: 139 A Current capacity: 160 A Power: 61 kW If you have any questions or require additional information, please send us a message or contact us by phone. CNC machining centre for processing wooden profiles (windows, doors, etc.). Comes with an additional linear tool magazine (120 positions), 2 four-axis machining heads for simultaneous processing (20kW), automatic loading and unloading tables. Optionally, a comprehensive tool package is available (tool holders, angle heads, profile heads). Currently the machine is in continuous use. The machine was purchased in 2024 after a complete overhaul. Since then, it has operated for 15 months on a single shift. Technical specifications: Working ranges: Minimum width: 25 mm Maximum width: 260 mm Minimum height: 10 mm Maximum height: 150 mm Minimum length: 180 mm Maximum length: 4500 mm The max. working length is achieved by multiple transfer of the part in the clamp. Spindle no. 1: Number of axes: 4 Motor power S1: 20 kW Motor speed range: 0 – 18,000 rpm Direction of rotation: right / left C axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Hand tool magazine for spindle no. 1: - Magazine type: disc - Magazine capacity: 18 tools - Holder spacing: 100 mm - Max. weight per tool: 10 kg - Max. total tool weight: 130 kg - Tool holder type: HSK F 63 Spindle no. 2: Motor power S1: 20 kW Motor speed range: 0 – 18,000 rpm Direction of rotation: right / left C axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Hand tool magazine for spindle no. 2: - Magazine type: disc - Magazine capacity: 18 tools - Holder spacing: 100 mm - Max. weight per tool: 10 kg - Max. total tool weight: 130 kg - Tool holder type: HSK F 63 External magazine: - Magazine type: linear - Magazine capacity: 120 tools Nledpfsyu Sn Uex Akfsa - Holder spacing: 80 mm - Tool holder type: HSK F 63 Loading table: automatic cross-feed Unloading table: automatic cross-feed CNC control: PLC: Siemens S7 Mobile control panel Control computer: - Operating system: Microsoft Windows - Modem for data transfer and diagnostics - Touchscreen Siemens Sinumerik 840 D Number of axes: 4 The machine is in full working order and is currently in continuous production. For an additional charge, a comprehensive range of accessories is available: 8 angle heads, a package of 3 standard tool holders, and a package of 17 new arbors for heads.

Condition: excellent (used), Lightly used automatic TC, TU, TZ profile production lines, designed for manufacturing and roll forming TC, TU, TZ profiles up to 1.5 mm metal thickness. Technical Specification: Manufactured in: Estonia Adjustable profile height: 100 – 250 mm Profile width: 50 mm Profile edge (folded): 15 mm Minimum rollable sheet thickness: 1 mm Maximum rollable sheet thickness: 1.5 mm Roll distance: 300 mm Machine dimensions: 900 x 4000 mm The machine is not equipped with a guillotine or perforating rolls. Operation is straightforward, controlled via two buttons. Nedpfx Aex Sx R Sjkfsla If you have further questions, we will be happy to answer them.

Condition: excellent (used), Handtmann 226 sausage production line with hanging device Nljdpfxsy D T Nms Akfsa

Condition: like new (used), MOULDER INFEED IF-100 MAX FEED SPEED 100M/MIN MAX LENGTH 6100MM MIN LENGTH 1500MM FLAT CHAIN CROSS FEED WITH 5 CHAINS Nodpfx Aey D Akmokfela INVERTER DRIVE ACCELERATOR 5KW MAX WIDTH 250MM MIN WIDTH 50MM MAX THICKNESS 100MM MINIMUM THICKNESS 12MM 4X FEED ROLLERS 180MM MOULDER OUTFEED OF-100 DROP LEAF OUTFEED CAPABLE OF HANDLING ALL SIZES AS PER IF-100 INFEED CROSS FEED TABLE WITH 7X BELTS SUITABLE FOR UP TO 100M/MIN AVAILABLE EX STOCK PRICE INCLUDES INFEED AND OUTFEED POSSIBLE TO OFFER SUITABLE MOULDER AS NEEDED, WEINIG OR LEADERMAC !!!

Condition: ready for operation (used), functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 180 Press’ Object of sale: 1 x Xerox Versant 180 with the following equipment: incl. Fiery Server EX180 incl. Paperdeck A-CF03 incl. Booklet Finisher A-FN13 Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 4,419,328 pages Colour: Approx. 3,524,210 pages Black: Approx. 895,118 pages Condition: Nedpfsu Ra Smox Akfsla This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Year of construction: 2023, condition: used, machine/vehicle number: H300SV23-17, The KTP 300 S is a production press with side extraction of the drawing cushion, capacity 300 t, stroke 1000 mm, max. tool size 1400 x 1200 mm, max. tool weight 5,000 kg, power supply 400V, 50/60Hz, 36kW. Nedpfx Ajyn Ni Ajkfjla

Year of construction: 2008, condition: good (used), A complete line for the production and packaging of fruit and vegetable juices. The line consists of machines: fruit-vegetable pulp milling and production line (MEGA bunker hopper, MEGA 2012 rotary sieve, MEGA 2008 batching rung elevator, MEGA 2008 brush dripper, roller inspection conveyor- MEGA 2008, 2017 screw conveyor, pulp impeller pump, pulp tank, belt press-FLOTTWEG 2008, rinse water tank-FLOTTWEG 2008, juice cooling system- STM 2018), packaging line (triblock arrow-STM 2014, buffer tank STM 2014, bottle orientator STM 2013, capping machine STM 2013, HITACHI printer 2016, labelling machine 2018). We also have a second smaller bottling and packaging line for sale. Nlsdpfepqxvxjx Akfsa

Year of construction: 2024, condition: excellent (used), – Power – 3,5 kw – Managament – PLC Control – One Appointments Units – Run out table – 15 m ( Possibility of upgrade ) Nlsdoyx E Haspfx Akfja – Diameter of block – 300mm – Wire diameter range – 1.8 – 3.2 mm – 1550 N/mm2 – Ring diameter – 300 – 420 mm - possible another diameter of rings – Capacity – 52,5 m2/8h for mesh with next characteristics : Ring diameter 350 mm – 9 coils Wire diameter – 3 mm Mesh dimensions – 10 x 5 m – dimensions of mesh – 10x 5 m ( possibly longer ) depends on the weight of the final mesh – Power – 3,5 kw ( complete line ) – Number of workers – 1 per shift

Condition: ready for operation (used), Bramidan 4-0F Motor: 4 kW Press dimensions: 250 x 100 x 255 cm Bale dimensions: 1100 x 700 x 950 cm Bale weight: 200-250 kg Nljdpsv Ai Uqjfx Akfsa Pressing force: 18 tons Weight: 1580 kg This device is used to reduce the volume of waste such as film, paper, etc. Price: €4500 Aventek MK 2500 Baler This is an industrial baler for compressing waste such as: - Film - Cardboard / paper - Plastics Pressing force: 25 tons Bale weight: 400 kg depending on material Bale dimensions: approx. 1200 × 800 × 800 mm Cycle time: approx. 50 s Power supply: 400 V Motor power: approx. 5.5 kW Year: 2013 Price: €6500 ORWAK 9020 Baler: - Motor 2.2 kW – 380V - Pressing force: 20 tons - Bale size: 1100 x 700 x 800 mm - Bale weight: depending on material, 200-300 kg Price: €5500

Condition: new, Year of construction: 2022, Wyciskarka do pomarańczy Zumex Versatile Pro Produkt: świeżo wyciskany sok Njdpfxswk D Nqo Akfela Owoce na minutę: 22 owoce/min Pojemność koszyka: 10 kg Wielkość owocu: 65-81 mm Pobór prądu: 2,7 A Moc: 380W | 0,4 KM Napięcie: 230-240 V / 50-60 Hz Bezpieczeństwo: trzystopniowa kontrola bezpieczeństwa magnetycznego Wymiary szer. x gł. x wys.: 47,5 x 58 x 165 cm Waga - 87 kg Profesjonalna wyciskarka do soków z zasobnikiem na 10 kg pomarańczy. Przeznaczony do samodzielnego i wydajnego przygotowywania soków wysokiej jakości. Zaoferuj najlepszy sok dzięki temu inteligentnemu urządzeniu o wyrafinowanej konstrukcji, które triumfuje w kawiarniach, sklepach samoobsługowych i hotelach, gdzie jest duże zapotrzebowanie na soki, a to wszystko na powierzchni zaledwie 0,26 m2!!! Wydajność wyciskarki wynosi 1,5 litra świeżego soku na minutę. Sterowanie – dotykowe przyciski start/stop. Skórka cytrusowa jest automatycznie wyładowywana do dwóch wyjmowanych pojemników znajdujących się na spodzie urządzenia. Można jej używać nie tylko do wyciskania soku z pomarańczy, ale także innych owoców cytrusowych. Bezpieczeństwo: automatyczna blokada ostrza i silnika. Silnik zatrzymuje się po otwarciu pokrywy. Zabezpieczenie silnika przed przegrzaniem i zablokowaniem mechanizmu zgniatającego. Wbudowany system antybakteryjny AS Zapraszamy do kontaktu

Condition: excellent (used), Complete contents of protein powder factory which was set up in 2015. All Machinery in lovely condition. Machinery includes Winkworth style mixer, All-Fill pot and bucket filling lines, Pharma Systems capsule and tablet counters, sieves etc. Nodpsw Nivlofx Akfola

Condition: used, WE OFFER THE FOLLOWING EQUIPMENT FOR SALE: Extruder 60 x 25D – 2 pcs Njdpfoy Duzdjx Akfsla Extruder 25 x 25D Extruder 45 x 25 D Extruder 60 x 35 D foam screw with CO2 pump Twin extruder 30 x 2 x 20 D Tool for foamed synthetic wine corks Cooling bath 10 m – 2 pcs Puller and cutter FLERON up to 20 m/min and 1,000 cuts/min – 3 pcs (FLERON) BELAFORM cutter

Condition: excellent (used), Year of construction: 2018, Weinig production line CONTUREX C 125, year of manufacture 2018 Nledpsy Emrkofx Akfsa

Condition: good (used), Year of construction: 2001, functionality: fully functional, working height: 520 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (2001/2007), left/right, for triple units, shape units according to Lisec shape catalogue and 4-sided stepped units: - RTVN-32/25WE, inlet conveyor (3,2 m length), year 2007 (!) - RTL-25VN, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower, year 2007 (!) - RTVN-16/25ST, outlet conveyor (1,6 m length), year 2007 (!) – RSVN-38/25A, frame set section, year 2001 – RTVN-15/25MZ, measuring zone for gas filling press, year 2001 – RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 – FPS-36/25U2T, gas filling press for argon, year 2001 – RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 Nedpfx Aoy Exuwekfela – RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 – APKV-25/2, 2-track cork applicator, year 2001 – RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 – VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, year 2001 – DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001 All machines were working properly until dismantling and are now available from our stock in Hofkirchen/Austria and from our stock in Oroshaza/Hungary

Condition: good (used), irex 2000 / irex EVO Large-format labeler Housing ID: 61008950 / 4 IR Type: 2-line handheld labeller Label size: 31 x 22 mm Print configuration: Nodpey Hixpofx Akfsla Top: 12 digits (small, often for date/batch) Bottom: 7 digits (large, usually for price/weight) With € symbol marking, etc. Total of 6 units available Shipping possible

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Nlsdpfx Aoyz Dr Tekfja Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Each line includes: • Main Extruder: BA105 AMUT, year of manufacture 2004 • Single-screw Co-extruder: ROYAL EUROPA (Canada), year of manufacture 2005 • Raw material pneumatic conveying system • Cooling table with tank (AMUT NERG10, 10 m), year 2004 • Puller-saw (TP25, 7 m), year 2004 • Discharge table _____ Nlodpfsyc R Aaox Akfja TECHNICAL DATA – BA105 AMUT Extruder • Screw: Ø105 mm, length 24 L/D • Type: PCD90WEF; VBM105-24-007 • Speed range: 2.66 ÷ 26.6 RPM • Screw material: alloy steel 41CrAlMo7, hardness 1000 HV • Gearbox: ratio 1:65.6 R • Thrust bearing: 1,400,000 N • Barrel heaters: 42.92 kW (7 heating zones, 4 cooling zones) • Main motor: 60 kW, 1750 rpm • Venting: 2.2 kW pump, 30 m³/h, vacuum 700 Hg _____ TECHNICAL DATA – ROYAL EUROPA Co-extruder • Type: 253-100-000, column-mounted • Screw: Ø1¾", length 21D, compression ratio 2:1, double flight • Screw and barrel material: AISI 4140 steel • Bimetallic barrel: Ø3" O.D. / Ø1¾" I.D. • Screw hardness: 50–52 RC Gearbox: • Type: ROSSI RCI 100 U03A • Ratio: 1:15.2 + belt 1:1.65 (total 1:25) • Belt type: 3VX600 (4 pcs.) Heating and cooling: • Heating power: 8.9 kW • Heaters: 4+1 • Cooling: 1/16 HP, 4 fans Motor: • POWERTEC Frame 215 TC • Power: 10 HP • Speed range: 0–1750 rpm Technical condition: Both lines are complete and fully operational Ready for profile production using co-extrusion technology Possibility to sell one or both lines, depending on buyer’s requirements On-site inspection available. Documentation and photos provided. It is possible to purchase one line for €80,000.00

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, The line includes: - Main extruder: BA130 (Cobra), year of manufacture 2008 - Co-extruder: CM65, year of manufacture 2008, sold for parts Nljdpoyc Rtxjfx Akfea - Embosser, cooling tank, nailer, puller, perforator, guillotine – all year of manufacture 1996 TECHNICAL DATA – BA130 Extruder (Cobra) - Main screw: Ø130 mm, length 26 L/D - Center distance: 1050 mm - Screw material: XALOY 41CrAlMo7, hardness 1000 HV - Gearbox: 1:31:7 R - Thrust bearing: 2 020 000 N - Barrel heaters: 74.6 kW (7 heating zones, 6 cooling zones) - Main motor: 205 kW, 1460 rpm - Degassing: pump 4 kW, 100 m³/h, vacuum 700 Hg - Feeders: 2x motor 2.2 kW, ratio 1:25:4 R, screw speed 112 rpm Technical condition: The line is operational and ready for production The configuration allows for the complete siding production process – from granulate to finished profile Individual price quotation and on-site machine demonstration available.

Condition: ready for operation (used), functionality: fully functional, Fully equipped plastic processing line, including: - Main extruder: BA92 NOVEL - Co-extruder: ROYAL MACHINE, model 253-070-000, mounted on a support column. The line consists of several components. - Suitable for co-extrusion applications – e.g., multi-layer profiles, strips, technical components TECHNICAL DATA – BA92 Extruder (NOVEL) - Screw: Ø92 mm, length 24 L/D - Type: B60S4; VB92-24-005 - Speed range: 3.3 ÷ 33 rpm - Barrel: 34CrAlNi7 steel, hardness 1000 HV - Gearbox: ratio 1:63.4 R - Thrust bearing: 1,170,000 N - Heating zones: 6 - Cooling zones: 4 - Motor: 63.8 kW, DC, 210–2100 rpm - Venting: 2.2 kW pump, 36 m³/h, vacuum 700 Hg - Feeder: 1.2 kW DC motor TECHNICAL DATA – ROYAL MACHINE Co-extruder - Screw: Ø1¾", length 21D, compression ratio 2:1, twin-flighted - Barrel material: AISI 4140 steel (bimetallic barrel 2” O.D. x 1¼” I.D.) - Gearbox: ROSSI RCI 80 U03A, ratio 1:16.4 + belt 1:1.65 (total ratio 1:27) - Drive belt: type 3VX560, 3 pcs. - Thrust bearing: load capacity 20,000 kg Nljdpjyc R U Asfx Akfoa - Heating: 6.9 kW, 3+1 heaters - Cooling: 1/16 HP, 3 fans - Motor: POWERTEC Frame 184 TC, 5 HP, 0–1750 rpm Condition: complete, fully operational line, ready for operation Application: plastic processing in co-extrusion processes Technical documentation available upon request. Includes additional spare parts.

Condition: used, mileage: 56,770 km, power: 308 kW (418.76 HP), first registration: 02/2022, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 02/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Operating hours: 2,650h. ASR, BrakeMatic, monotone horn, rear view camera system with 7" colour display, two work lights each at the front and rear, LED beacon front and rear, preparation for central lubrication system, front attachment/weeds brush quick-change system prep, twin engine version with JCB 93KW auxiliary engine (Tier 4), dual-sided debris collection with gross volume of 8 m³, water system approx. 2,150 litres, gas-sprung suction hose arm 200mm, high-pressure washer 100 bar. Nlsdpfxoxpzths Akfea

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Mayonnaise production line Machine ready for operation Capacity: 400 L Double-walled: +6 bar Specifications shown in the photo Nlodeyc E Nzspfx Akfja Line not yet dismantled; was operational in the plant until its closure The production capacity is 650 kg/hour for high-fat quality, with a maximum throughput of 900 kg/hour. The line features two filling stations – one for buckets and another for small containers. Operating manual available in Polish and English. See my other listings as well.