Used Pullmax Weld Edge Former for sale (9,008)

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) Lodpfx Aohpf Iyeckoab - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Ledpfeycv Sasx Ackoab Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: new, neu ca. 2 Wochen ab Auftragse 5442 € 105.03 € 4536 € 28 mm Accessory set consisting of: 14 pcs. screw clamp180° HIS28Z3000 8 pcs. screw clamp45° HIS28Z3045 6 pcs. V-support HIS28VP100 30 pcs. quick clamping bolt shortHIS28SB100 6 pcs. connection bolt HIS28BS100 4 pcs. mangnetic bolt HIS28MB100 8 pcs. stop rail 150mm HIS28FA150 8 pcs. stop rail 225mm HIS28FA225 2 pcs. stop rail 500mm HIS28FA500 6 pcs. stop angle 175mm HIS28WA175 1 pc. stop angle 325mm HIS28WA325L 1 pc. stop angle 325mm HIS28WA325R 1 pc. support angle 600mm HIS28W600L Laedpfx Aoyq Sumockob 1 pc. support angle 600mm HIS28W600R 1 pc. support angle 800mm HIS28W800L 1 pc. support angle 800mm HIS28W800R 1 pc. cleaning brush Nylon HIS28RB 1 pc. torch holder HIS28BH 1 pc. tool cart HIS28WW1000 and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L)

Condition: new, neu ca. 2 Wochen ab Auftragse 3165 € 2754 € 28 mm Accessory set consisting of: 8 pcs. screw clamp 180° HIS28Z3000 4 pcs. screw clamp 45° HIS28Z3045 4 pcs. V-support HIS28VP100 20 pcs. quick clamping bolt short HIS28SB100 4 pcs. connnection bolt HIS28BS100 2 pcs. manetic bolt HIS28MB100 4 pcs. stop rail 150mm HIS28FA150 6 pcs. stop rail 225mm HIS28FA225 4 pcs. stop angle 175mm HIS28WA175 2 pcs. stop angle 275mm HIS28WA175275 1 pc. stop angle HIS28WA325L 1 pc. stop angle HIS28WA325R Lajdpsyq Sq Iofx Ackeb 1 pc. support angle 800 HIS28W800L 1 pc. support angle 800 HIS28W800R 1 pc. cleaning brush Nylon HIS28RB 1 pc. torch holder HIS28BH and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L) OPTION: Tool cart HIS28WW1000 € 545,--

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2590 € 2255 € 16 mm The set for everyday and universal use with an extensive range of clamps, brackets and clamping options. Including tool trolley for an optimised and fast workflow. Consisting of: 10 screw clamps 180° HIS16Z3000 4 screw clamps 45° HIS16Z3045 4 V-support HIS16VP100 8 stop brackets 90x37, 5mm HIS16WA9037 Laedpfsyq Sqhsx Ackob 8 pieces stop bracket 90x90mm HIS16WA9090 2 pieces stop bracket 300mm HIS16WA300 1 piece stop bracket 500mm HIS16WA500L 1 piece stop bracket 500mm HIS16WA500R 4 pieces stop bar 75mm HIS16FA075 8 pieces stop bar 115mm HIS16FA115 28 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH 1 piece cleaner HIS- Cleaner-1L 1 piece Anti-stick agent HIS-Premium-1L

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1725 € 1485 € 16 mm The extended entry level with added value in the set configuration for the most common work steps and applications. Consisting of: 8 screw clamps 180° HIS16Z3000 2 screw clamps 45° HIS16Z3045 2 V-support HIS16VP100 4 stop brackets 90x37, 5mm HIS16WA9037 6 pieces stop bracket 90x90mm HIS16WA9090 Lajdoyq Sqbepfx Ackeb 2 pieces stop bracket 300mm HIS16WA300 2 pieces stop bar 75mm HIS16FA075 8 pieces stop bar 115mm HIS16FA115 20 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH 1 piece cleaner HIS-Cleaner-1L 1 piece anti-adhesive agent HIS-Premium-1L OPTION: Tool trolley HIS16WW1000 € 449,--

Condition: used, Year of construction: 2026, The latest model of the CORMAK EBM120 edge bander with a base, equipped with a polisher, milling, automatic application of glue to the table top and veneer. EDGEBANDER IS EQUIPPED WITH AUTO-FEED OF THE WORKTOP AND EXTRACTION FAN FOR MILLING UNITS Characteristics of the EBM120 stationary edge bander with extraction The EBM120 oiler and edge bander with extraction is a powerful device that significantly facilitates and improves the processing of wood-like materials. Strong and Stable Pressure: The EBM120 oiler and edge bander is characterized by a strong and stable pressure that ensures even operation. This allows you to achieve perfect processing results. Edge Polishing Option: The machine is equipped with the option of polishing a previously milled edge, which allows you to obtain a perfectly smooth and aesthetic finish of the processed materials. Extraction for milling units: This device has an extraction system that is useful when working with milling units, which helps keep the workplace clean. Smoothly Adjustable Automatic Feed: EBM120 is equipped with a smoothly adjustable automatic feed of the processed material, which ensures precision and comfort during work. Two milling units: The machine is equipped with two milling units that enable processing both the upper and lower parts of the countertop, which increases the efficiency of the machining process. Comfortable Veneer Feeding Arm: EBM120 has a comfortable veneer feeding arm, which makes the operator's work easier and contributes to the efficiency of the process of wrapping materials. Automatic activation of the veneer pick-up rollers: The veneer pick-up rollers turn on automatically when the appropriate melting temperature of the glue is reached, which increases the precision and safety of the banding process. Polishing Speed Adjustment: The polishing speed automatically adjusts to the feed speed, which ensures an even and aesthetic finish of the processed elements. Banding of irregularly shaped countertops: The machine enables gluing of irregularly shaped countertops by moving the glue feeding head to the side position, which increases its versatility. Worktop with Automatic Feed: The worktop is equipped with automatic feed and support rollers, which facilitates the movement of material during work. Adjustable rollers allow the processing of larger materials. Pressure Rollers and Reinforced Pressure Strip: The pressure rollers are slanted, which helps guide the table top and prevents it from rolling back. Additionally, the reinforced aluminum pressure bar ensures even distribution of the pressure force and stability of the workpiece. The EBM120 edge bander with extraction is an advanced device that guarantees precision, durability and efficiency when processing wood-like materials. Its advanced technological solutions and convenient functions make it irreplaceable in the carpentry and window industry. Technical parameters Total power demand 3.2 kW Power 230V Banding height 7 - 60 mm Milling height 7 - 45 mm Tape thickness 0.3-3 mm Heating speed 5 - 10 minutes Banding speed 0-6 m/min Glue tank capacity 1000 ml Cutter shank 1/4" Dimensions 2050 x 900 x 1170 mm Laodpfow Ich Sex Acksb Weight 82 kg WARNING: LAST PIECE,, NEVER USED

Condition: new, Year of construction: 2025, functionality: fully functional, power: 34 kW (46.23 HP), input voltage: 380 V, Equipment: documentation/manual, Upper pressure bar Aluminum pressure bar provides excellent rigidity and extended service life. The compactly arranged rubber rollers press the workpieces to ensure slip-free transport. Panel conveyor The long, heat-treated semicircular guide rail allows perfect contact with the conveyor, without play. The conveyor is fixed to the machine body for stability of wide panels, with a maximum extension width of 600mm. Package for narrow parts Feeding package for narrow parts, ensuring the minimum edge width is 40 mm. Pre-milling unit Pre-milling with 2 diamond cutters, 43mm height. Two pneumatically controlled motors (2 x 3.7kW), intermittent edge milling of the panel. Panel pre-heating unit x2 Heats the panel edge so that the adhesive melts correctly, ideal for humid or cold areas. An infrared lamp with an operating temperature of 300°C heats the panel edge for better bonding. Edge band support x2 The large support is at an appropriate height for easy feeding and long service life. Edge cutting unit x2 Pneumatically operated guillotine with electric switch for accurate cutting of the edge band at the end. Premelting gluing unit x2 System includes an upper reservoir for optimal volume and a small lower pot that keeps the adhesive fresh. Automatic adhesive pumping + 25kg tank Adhesive is automatically pumped into the upper reservoir when the level drops below the sensor. Edge cutting unit Pneumatically operated guillotine with electrical switch for correct end-cutting of the edge band. 2 sets of pressure rollers A 100mm pre-pressing roller in coordination with four rear rollers ensures firm bonding. Lubrication system Lubrication pump for daily maintenance, lubricates the guide rail by simply actuating the lever. End trimming unit Structure with linear guide at 45 degrees, with 2 motors of 0.35kW, 12,000 rpm. 2 sets of fine finishing units with pneumatic retraction One set retracts pneumatically when changing band thickness; adjustment time is practically zero. Diamond knives R1.5. Corner rounding unit Designed for rounding the edge band on the ends and lengthwise, achieving a circular radius R. 2 sets of scraping units with pneumatic actuation Two sets with different circular radius knives (one set with R1.5, the other with R1). Extraction system Each unit has its own independent extraction outlet (125mm), totaling 6 outlets. Straight glue cleaning scraping group Removes edge band residues, followed by straight scraping to remove excess adhesive from the top and bottom surfaces. Spraying unit - cleaning agent Separation agent before pre-milling, preventing adhesive from sticking to the panel surface. 2 sets of polishing units Intended for 2 adhesive colors (dark and light) to avoid contamination. Solution for narrow pieces Allows processing of parts with the following sizes: 120x120mm (4 sides), 200x40mm (long side), 40x200mm (short side). Additional conveyor roller Solid support for large or in-line panels. Laodpey Rlbnefx Ackob PUR Device 2KG/20KG – 6500 EUR + VAT Temperature control system via touch screen and uniform heating. Polyurethane-based (PUR) adhesive technology ensures superior bonding performance.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers Ljdpfoxgqvtsx Ackjab

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Year: 2006 - technically efficient, ready to work – after full service - flash limitation: 0.2-2 mm Laedpfxoyu R Elj Acksb - maximum welding length: 2600 mm - support arms - PLC controller

Condition: new, Year of construction: 2026, table length 1000 mm table width 1000 mm table height 200 mm weight 300 kg Manufacturer: GERD WOLFF Website: Technical Details: • Length 1000 mm • Width 1000 mm • Height 200 mm • Weight 300 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside Ledpfsy S D Nasx Ackeab • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, table length 1220 mm table width 760 mm table height 910 mm Lodpfx Acjxqrhlokjab weight 226 kg

Condition: excellent (used), KS2400 with oscillating swivel function Ljdpfxsy Su Hie Ackoab

Condition: new, table diameter 715 mm table load 500 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1 UpM T-slots 6 x M16 Tilt Angle 90-180-110 ° Tilting Speed 30 sn min./90° weight of the machine ca. 675 kg Ljdpfxsyv Nxzj Ackeab

Condition: new, table diameter 900 mm table load 1.000 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1,1 UpM T-slots 6 x M16 Tilt Angle 90-180-105 ° Laedpeyv I Rijfx Ackob Tilting Speed 30 sn min./90° dimensions 2100x920x1100 mm weight of the machine ca. 930 kg

Condition: used, Year of construction: 2010, controller model: , _____ Description: Year of manuf. : 2010 TruDisk 3302 laser system :- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad :- Output power of 3.3 kW at the workpiece :- Laser system with 1 cavity :- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control :- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data :- Fast laser power control :- TruControl 1000 control system :- Storage capacity for 199 laser programmes :- Safety monitoring in accordance with laser safety class 1, including a central safety lock :- Protection class IP54 :- 10.4" panel computer with TFT touchscreen Ledpsy R Sc Eefx Ackoab Extension of the beam path :Plus 1 additional laser light cable output, including interface card :consisting of: :# Optical assembly on base plate with fast switch :# Beam safety switch after coupling, if the output is not connected to an LLK KUKA Roboter KR 30 HA (High Accuracy) inkl. KRC2 :- Six-axis industrial robot mechanics with articulated kinematics :- Three-phase servo drives for 6 degrees of freedom – maintenance-free and protected against overload :- Absolute position measurement :- The K-IRL programming language enables, amongst other things, a flexible programme structure, freely selectable programme/variable names, etc. :- Telediagnostics module DKP 400.1 Rotate-Tilt Positioner :- Rotation and tilting of workpiece clamping devices in relation :to the robot’s position :- Fully interpolated integration of the rotation and tilt axes :as the 7th and 8th NC axes 3D clamping plate 800 x 100 :- Demmeler System :Clamping of fixtures via 3D worktable, hole pitch 16 :mm / grid 50x50 mm 2, SW 800x100 Two-station rotary table :- Manual two-station rotary table, each side of which can accommodate one component clamping fixture :- Light-tight integration into the safety enclosure :- The fixtures are connected via two support rails each Laser Welding Technology Package :- Manual two-station rotary table designed to accommodate one component clamping fixture on each machining side :- The fixtures are connected via two support rails each :with a 16 mm diameter and 100 mm hole pattern : : Standard cabin :- Dimensions (L/W/H) 4800 mm x 7000 mm x 3200 mm :- Automatic sliding door at the front 2000 mm x 2300 mm :- 1 laser safety screen :- Cab lighting

Condition: used, sanding belt measurements 2.260 x 150 mm Motor output 1,5 kW table: schwenkbar Lasdpfx Acowffpbokeb Dust suction hood 100 mm

Condition: used, Year of construction: 2013, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Weight: 6.000 kg Price: On request - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: Nordson Ledpfx Asyrp Uaecksab - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, Weight: 3.500 kg Price: On request - Details: - └ Description: Includes Nordson unit built in 2017 - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 6 - └ 1st unit type: Pre-milling unit - - Type/Brand: Nordson - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Rough milling unit - └ 5th unit type: Cap unit - └ 6th unit type: Fine milling unit - Voltage [V]: 400 - Current consumption [A]: 41 Ljdpfxeyrpvwe Ackoab - Fuse [A]: 50 - Transport dimensions: 6700mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2012, max. working width: 1000 mm workable material thickness: 0,5 - 50 mm Total power: 82 A Total current consumption: 44,5 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg Standard configuration SBM-M D 1000:Two-side slag removal of plasma and thermal cut sheets up to 120 mmSaving of tool costs incurred by mechanical deslagging –no time-consuming and expensive grindingTwo-side slag removal saves the time intensive turning of the often very heavy workpieces or machining of parts twiceUp to 60 % work time savings compared to one-side processing machinesModular and compact in modern machine design - smaller footprintDry operationThe cross-machining principle guarantees uniform tool utilisation over the entire working er and lower assemblies separated can be adjusted or turned on and off electricallyInnovative tooling and material feed system allows for optimum handling of burrs and uneven surface of piecesMaximum productivity while maintaining machining qualityImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Systems; Material Handling; Robotics & Automation; Processing Tools Lodpfx Asy Sp Hdscksab SBM-XL 1000:Deburring and edge rounding of parts up to 120 mm material thicknessProcessing both sides of the parts simultaneously eliminates the need of turning heavy parts and processing them for a second timeSimultaneous deburring and edge rounding on interior and exterior contoursDry operationSimple, intuitive operationThe processing units can be individually adjusted or turned on and off imum productivity while maintaining machining qualityThe cross-machining principle guarantees optimum tool utilisation over the entire working ter and simpler tool change within just a few minutesModular and compact in modern machine design - smaller footprintImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Technology; Handling Systems, Automation; Custom SolutionsFor repeated customer requirements, processing parameters can be called up quickly and easily through predefined to 60 % work time savings compared to one-side processing grinding machines Extended machine accessories - 2 x dust extractor - 2 x conveyor belt

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: Ljdpfsfbr S Rex Acksab • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm Lajdpfjbahd Eox Acksb edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar length 3750 mm

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Lasdpfjr A Eq Rjx Ackob Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: Lsdpfxshy Tlro Ackoab - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL Laedpoc S Di Rsfx Ackob device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...