Used Rehar Onr-5,5 for sale (639)

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 6,5 mm distance between columns 3100 mm 1000 mm Cutting length variabel mm cutting gap adjustment variabel mm connected load 12,0 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 3,5 x 2,2 x 1,8 m Hydraulic guillotine shear with Fjdpoz Dky Rofx Ap Dogh - cutting length adjustment - cutting angle adjustment - support arms - squaring arm - rear enclosure - mobile material bin

Condition: new, Year of construction: 2026, pressure 100 t throat 250 mm stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Fgedpfx Aoyfwywjp Djh Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, table diameter 2500 mm table load 20,0 t swivelling range 0 - 135 Grad turning speeds 0,04 - 0,4 U/min max. torque on the faceplate 40000 Nm table pass 200 mm Fgodpfsfv Axmex Ap Djh welding current 1000 Ampere total power requirement 5,5 + 11,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Year of construction: 2010, condition: used, Static press ATS: 5,5 kW 400 V 32 A Fgodpfx Apehqb Nme Deh Container: 32 m3

Year of construction: 2008, condition: excellent (used), SAC CS40 Format Panel Saw year 2008 S/N 312029 Cutting length 3,200 mm Anodized aluminum sliding table 3200 x 420mm, locks for easy panel loading in any position steel gliding system Fgjdpfx Ajhwwlpsp Djh Main saw arbor(30 mm) 45° tilting electric raise & lower of main blade. Main motor 5,5 kW, self-braking motor utting speeds 2,600 - 4,000 and 5,600 rpm Blade diameter max 400 mm max cutting height 130 mm ( 90° ) 100 mm ( 45° ) rip fence 1,500 mm scoring saw motor 0,75 kW 120 mm (Dia. scoring blade - 8,000 RPM scoring unit w/external adjustment ) Square crosscut fence with stops, extension table with miter fence & sliding outrigger support. 400 V , 50 Hz weight 820 Kg CE ,marked

Condition: used, functionality: limited functionality, working width: 220 mm, working height: 120 mm, overall weight: 2,300 kg, power of feed motor: 1,200 W, spindle speed (max.): 6,000 rpm, table length: 2,000 mm, feed roller diameter: 120 mm, Equipment: motor brake, COMPACT 22 - AUTOMATIC PROFILING MULTIPLANER Max working width 220 mm Min working width 25 mm Max working height 120 mm Min working height 6 mm Min workpiece length 480 mm Feed rate 6 - 12 m/min spindle speed 6000 r/min spindle diameter 40 mm length of vertical spindle 135 mm Fjdstph Nmopfx Ap Djgh length of horizontal spindle 230 mm axial adjustment of vertical spindle from 0 to 25 axial adjustment of horizontal spindle from 0 to 25 Min/Max tool diameter for vertical profile tools 100 – 180 mm Min/Max tool diameter for horizontal profile tools 100 – 180 mm Min/Max tool diameter on dressing shaft 120 – 140 mm Min/Max joint bevel cutter diameter 145 – 165 mm motor power of dressing shaft 4 kW motor power of vertical spindle 5,5 kW motor power of thickness shaft 4 kW motor power of feed 1- 1,2 kW motor power of height adjustment 0,37 kW feed roller diameter 120 mm feed table length 2000 mm adjustment range of feeding table and joint ruler 10 mm diameter of suction hood 120 mm net weight 2300 kg dimensions with universal spindle 3980 x 1520 x 1850 mm

Condition: new, Type SX1325AP-2128 Axis: Useful working area axis X-Y-Z 2070-2800-100 mm Pieces clearance in Z 100 mm Max. traveling speed 70 m/min Max. working speed 30 m/min Working table: Phenolic multifunction Nr. of stops standard 10 (4X-6Y) Vacuum pump 4*5,5 kW(50/60 Hz), air cooled Electrospindle: Standard power (S6) 9,5 kW, ISO30 Max. speed 24 000 rpm Tool changer: Fgsdpfxsdz Edqo Ap Dsh ATC carousel for 12 positions Lubrication: Automatic centralized lubrication Installation: Installed power 22-33 kW Compressed air cosumption 450 NL/min Extraction air consumption 3000 m3/h Extraction air speed 25 m/sec Suction hood diameter 2x150 mm Made in China Weight 3500 kg

Condition: used, Year of construction: 1984, x-travel 1000 mm y-travel 508 mm z-travel 460 mm size of pallet 1240 x 550 mm numbers of pallets 2 workpiece weight 800 kg spindle taper ISO 40 spindle motor 5,5 kW turning speed range 28 - 4000 U/min no. of tools in magazin 30 control MAZATROL M 1 weight of the machine ca. 5,6 t dimensions of the machine ca. 4,50 x 3,00 x 2,65 m Fjdpfx Aotqqk Iop Degh acc.: chip conveyor

Year of construction: 1998, condition: good (used), machine/vehicle number: 4422758898019, Offer 22646 Hydr. profile and bar shears with notching device and hole punching machine Technical data: - Flat steel shear - flat steel - 400 x 16 mm - or: 300 x 18 mm - Section steel shear - L- and T-iron at 90° 130 x 12 mm - square steel / round steel 40 / 40 mm - notcher - with square notcher for sheets up to approx. 13 mm - notch depth approx. 70 mm - notch width approx. 52 mm - Hole punch - punching force approx. 60 t - throat 400 mm - stroke approx. 10 to 50 mm Fodpemb U Slefx Ap Dsgh - punches in steel up to Ø 31 in 15 mm - material stop - div. 10 pcs. punch + dies - drive 400 V / 5,5 kW - space requirement W 1100 x H 2000 x D 1700 mm - weight approx. 2100 kg

Condition: good (used), Year of construction: 1999, Offer 22648 Technical data: - Sanding belt dimension approx. 2000 x 50 mm Fgsdpfx Apop H Tvxo Dsh - grinding belt speed approx. 30 m/min - contact wheel B 50 / D 300 mm - drive wheel B 50 / D 200 mm - adjustable belt centering - drive 400 V / 2880 rpm / 5,5 kW - space requirement approx. W 500 x H 1000 x D 1400 mm - weight approx. 80 kg

Condition: as good as new (ex-display), Year of construction: 2022, overall weight: 68 kg, pressure: 10 bar, input voltage: 230 V, hose package length: 5,000 mm, CRYONOMIC COB62+ dry ice blaster. Demo machine used for presentations by the distributor in Poland, condition like new. Used for about 20 h of demonstrations. Included in the scope of supply: machine, 5m hose, gun with standard nozzle. Fgodpfx Asq Rvakjp Dsh Max. blasting pressure: 10 bar. Air consumption: 0,5 - 5,5 m3/min. Dry ice consumption: 20 - 80 kg. Possibility to use additional abrasive module for more aggresive cleaning with abrasive. Possibility to use LED gun light. Simple and reliable operation and design backed by over 30 years of experience in manufacturing dry ice cleaning equipment. Manufactured in Belgium.

Year of construction: 2023, condition: new, Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Fsdpfxsn Uphfo Ap Djgh Voltage: 380 V, 50Hz

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler Fgsdpouc Sw Aofx Ap Deh coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Year of construction: 2007, condition: excellent (used), I sell the double end cutting and tenoning machine FRIULMAC IDRAMAT, Year 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting saw aggregates / 3,0 + 3,0 KW 1 + 1 pcs. grooving saw aggregates front + back Fgodpfxeib A E Ae Ap Doh Configuration right side / moving: 1 + 1 pcs. cutting saw aggregates / 3,0 + 3,0 KW 1 pc. special milling aggregate / 5,5 KW Material pressure feeding band from top Special construction, suitable also for sizing. Throughfeed machine. Siemens Simantic control panel. Very good condition. Available immediately.

Condition: new, Dimension of sliding table- 3800x375mm Gross cut capacity- 3800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Fjdpfx Apjdd Dzuo Djgh Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3800x1000x1100mm Weight - 820 Kg (EXW Jonava, Lithuania)

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Fjdpfednxydox Ap Djgh Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: new, Washing machine WA LC40 with centrifugal mill RM40 for single belt press EBP420, EBP500, EBP580 capacity up to 2 000 kg/h power: Fgjdpfxob Ncmfe Ap Doh elevator 2,2 kW mill 4,0 (5,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2,000 mm width 700 mm height 2,200 mm insertion resp. discharge height 800 mm weight 280 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for waste water 2 “ outside mash discharge height 1,250 mm suitable for pomaceous fruit scope of delivery 7, 9 and 12 mm cutting screen

Condition: new, capacity up to 1 000 kg/h power 5,5 (7,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2 014 mm width 770 mm height 1 615 mm insertion resp. discharge height 1 615 mm Fedpsb Ncn Hefx Ap Dogh weight 220 kg material 1.4301 / AISI 304 mash pump connection DN 65 AG mash discharge height 430 mm Stone discharge height 490 mm suitable for stone fruit, berries scope of delivery 5 mm screen

Year of construction: 1994, condition: defective spare-parts repository (used), machine/vehicle number: 20 048 M100390 130003048, movements x/y/z: gross/klein 6500/300 mm spindle turning speed range: 5400 rpm number ob tool positions: 8 pieces carriages: x/y u. z 60/30 mm/miin spindle drive: max. 5,5 kW The machine is sold as a spare part carrier because the controller is defective. electrical connection: 400 V kW space needed: 8600 x 2270 x 2150 mm Fgedpfx Apez N T Se Dsh weight: ca. 5000 kg

Year of construction: 2006, condition: used, The VP 800 bottle packer and depacker is designed for automatic operation within the beverage industry. Capacity: 600 crates/h 10 strokes/min. Power: 5,5 kW Current: 10 A Voltage: 400 V Frequency: 50 Hz Length: 3000 mm Width: 1540 mm Height: 2600 mm Weight: 1100 kg Formats: 24 x 0,33 L Vichy Fjdpfx Apevcqgns Dsgh Running direction: Right-left Operation / Control: Simatic S7-99 Base construction: Frame, height-adjustable Features: approx. 3 m bottle outlet; approx. 5,5 m crate inlet; approx. 4,5 m crate outlet

Condition: excellent (used), Year of construction: 1995, Chamfering unit, suitable for BIHLER GRM 50 or GRM 80 wire diameter range: 2,5 - 5,5 mm Fodji Tza Uepfx Ap Degh

Condition: excellent (used), Year of construction: 2001, I sell the format sliding table saw with scoring SCM SI 300N, year 2001. Sliding table length 3200mm. Max. cutting width on cross fence 1950 / 2850mm. Max. cutting width on parallel fence 1270mm. Motor 5,5 kW. Max. saw blade diameter fi.300x30mm Max. scoring saw blade diameter fi.120x20mm Main blade (scoring blade) 4000 (8000) rpm. Condition very good. Avialable immediately. Fodsiu Awbepfx Ap Dogh Please contact for more photos and details.

Condition: new, Specifications: capacity up to 600 kg/h power: drive motor 0,75 (1,02) kW (PS) brush cleaning 0,37 (0,5) kW (PS) high pressure cleaner 4,7 (6,4) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 825 mm width 1 085 mm height 1 290 mm insertion resp. discharge height 1 290 mm belt width 420 mm spread width 300 mm spread height 10 - 50 mm weight (belt press) 550 kg material 1.4301 / AISI 304 juice yield up to 75 % belt speed (continuously) 2,1 - 5,5 m/min lead time 0,4 - 1 min water connection min. G ½ “, min. 12 l/min juice discharge height 305 mm pomace discharge height 780 mm suitable for pomaceous and stone fruit Fodpfxed Nrake Ap Djgh scope of delivery high-pressure cleaner, compressor

Condition: used, Year of construction: 1983, Technical details: internal diameter: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 1,8 t Foder R Elhopfx Ap Dogh dimensions of the machine ca.: 2,8 x 2,5 m max. workpiece weight: 15 kg clamping dia. max.: 140 mm clamping length: 250 mm max. bore diameter to be ground: 0,8-90 mm min./max. hole to grind: 160 mm centre height: 90 mm workpiece spindle stepless: 112-1000 U/min

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 92805, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm Working height 8 - 120 mm 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Fodpsynl N Sofx Ap Dogh Bottom working spindle 5,5 kW / left + right 5.5 kW / top 5.5 kW / bottom finishing 5.5 kW Spindle speed 6000 rpm Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min lubricant pump mechanical digital displays Year of manufacture 2001 Dimensions 3400 x 1800 x 1900 mm (L x W x H), weight 2500 kg