Used Reis Tus 125 Ok50 for sale (4,293)

Condition: new, GMN TSE 100cg-6000 / 125 high-speed spindle, serial number: R358399, unused, in open original packaging, 100% functional, scope of delivery as shown in the photos. Bdedpfx Apji Eaabjvjf

Condition: ready for operation (used), Röhm RPP-125-1 / GA parallel gripper, LA82x45, ID 170022, serial number X5017, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Bdedpfx Apoi Ec Dxovef

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Bsdpfx Apscnw U Devjdf Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Year of construction: 2011, condition: used, Field of application: Construction VAT/margin: VAT deductible Please contact Mohamad Fattah Ahmad for more information Bauer - MAT Bentonite Pump BP 125 2 units available Good working order Bedpfx Apsh Ty Daevodf Immediately available

Year of construction: 2009, condition: used, Field of application: Construction VAT/margin: VAT deductible Bdsdpfxoh Ty Dlj Apvof Please contact Mohamad Fattah Ahmad for more information Vibrator MR 125 V with clamp MRZ 125 RTG Rammtechnik / Bauer Maschinen GmbH Vibrator Ready for the site and in good working condition!

Condition: ready for operation (used), L & Z Lathe NARDINI MS 125 E incl. collet chuck / quick-change tool holder Bdedpfozpg Uqex Apvef -Center height above bed 150mm -Swinging diameter over cross slide 140mm -Distance between centers 500mm -Bar capacity 34mm -Spindle speeds 50 - 2500 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Collet chuck - quick-change tool holder, type 173 E incl. 16 x collets -Multifix with inserts -Change gears -Tool cabinet with various tools -Machine feet -Chip guard -Drill chuck & live center -Work light -Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 950kg Errors and omissions excepted.

Condition: used, Year of construction: 1999, Transnorm curved belt conveyor right bend 125°-775-600 IR600 RA2012 Bedpjk Abt Eofx Apvodf Technical details: Manufacturer: Transnorm Type: Belt Curve 125° right TS 1500-100 Curved belt conveyor Year of manufacture: 2001 Angle: 125° Running direction: right inner radius (IR): 600 mm belt width (GB): 600 mm Speed: please contact, motor not yet mounted Belt type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Scope of delivery: without supports & sideguide (please inquire if required) Optional: supports & sidequides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2004, condition: used, functionality: fully functional, maximum load weight: 125 kg, loading space volume: 2.5 m³, machine/vehicle number: 3881 and 3690, Lot of 2 – TUPESA SC 125 V Industrial Steam Tumble Dryers (2004) Two High-Capacity Steam-Heated Tilting Drum Dryers An excellent opportunity to acquire two heavy-duty TUPESA SC 125 V industrial steam tumble dryers manufactured by TUPESA Maquinaria Textil, Spain. These industrial dryers are designed for continuous, high-capacity textile and garment drying, making them ideal for denim manufacturing, garment finishing, industrial laundries, and textile processing plants. Both units were previously installed in the MASI Jeans factory and formed part of a professional industrial laundry and finishing line. The machines are sold together as one lot. Unit K550 is operational. Unit K551 requires radiator replacement Technical Specifications • Manufacturer: TUPESA Maquinaria Textil • Model: SC 125 V • Machine Type: Industrial Steam-Heated Tilting Drum Tumble Dryer • Quantity: 2 Machines • Year of Manufacture: 2004 • Manufacturing Date: 17.12.2004 • Country of Manufacture: Spain • Power Supply: 380 V, 3-Phase, 50 Hz • Heating System: External Steam Supply • Variable Speed Drive: Danfoss VLT 2800 Inverter • Drum Type: Hydraulic Tilting Drum Machine Details Unit K550 • Internal Reference: K550 • Serial Number: 3881 • Operational Unit K551 • Internal Reference: K551 • Serial Number: 3690 • Requires inspection / suitable for spare parts or refurbishment Key Features • Two industrial steam-heated tumble dryers • Large-capacity tilting drum design • Hydraulic drum tilting for ergonomic loading and unloading • Steam-heated drying system • Danfoss variable-speed inverter drive • Industrial electrical control panel • Heavy-duty construction for continuous production • Designed for large-scale laundry and garment processing Bdodozkv R Depfx Apvsf Includes • 2 × TUPESA SC 125 V tumble dryers • Danfoss inverter drives • Electrical control cabinets • Main drive motors • Steam connection valves • Exhaust fan assemblies • Industrial support frames Applications • Industrial laundry operations • Garment manufacturing • Denim production • Textile processing • Garment finishing • Commercial drying facilities • Heavy textile processing Condition • Sold as one lot consisting of two machines • One machine fully operational • Second machine requires approx.. 1000 euro radiator replacement. • Previously used in professional industrial production • Both machines are externally complete • Good overall industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all related costs. Professional dismantling and lifting equipment are recommended due to the size and weight of the machines. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are available as this two-machine package or together with the complete industrial laundry and finishing line.

Condition: good (used), Manufacturer: Thyssen / Krupp Type: KHP 130 /125 Electrical Motor: Included (200 kW) Rotor diameter: 1.300mm Rotor width: 1.250mm Inlet: 1.370 x 990mm See PDF-file below for more detailed information. Bsdpfxsg I R Ruo Apvedf Included: – Inlet – Hydraulic system to open New spare-parts in stock.

Condition: excellent (used), functionality: fully functional, actuation type: electric, working width: 10,000 mm, bending angle (max.): 140 °, overall weight: 5,000 kg, total length: 11,000 mm, input voltage: 400 V, input current: 32 A, Equipment: emergency stop, foot remote control, FOR SALE: Jorns Norma Line 125 SM CNC 400-10 – Heavy-Duty 10-Meter Press Brake with Sheet Cutter Are you looking to upgrade your sheet metal workshop with serious capacity? Up for sale is a rare, high-capacity, Swiss-made Jorns Norma Line 125 SM CNC bending machine, boasting an impressive 10-meter bending length. In the sheet metal industry, Jorns is widely recognized as the gold standard for durability and precision. This unit was manufactured in 1989but has been operative for which is exceptionally low for a commercial machine of this caliber. It has primarily been used for light work with galvanized steel, meaning the mechanical components are in great condition. Additionally, the machine comes equipped with an integrated sheet cutting knife for quick, clean, and straight cuts directly on the machine. Key Highlights: Massive 10-Meter Bending Length – Allows you to bend long roof, ridge, and facade flashings in a single piece without joints. Exceptionally Low Hours – With only 6,000 operational hours, this machine has plenty of life left for decades to come. Premium Swiss Engineering –Extremely rigid and precise frame with a solid machine weight --- ### Technical Specifications: Brand: Jorns (Switzerland) Model:Norma Line 125 SM CNC 400-10 Year of Manufacture: 1989 Max. Bending Angle: 140° Bdedpfx Apezlkq Isvjf Bending Length:10,020 mm Dimensions & Weight: Machine Depth:1,700 mm Machine Height:1,870 mm Machine Weight: Approx 6000 kg Additional Equipment: Programmable Jorns CNC 400 Control unit Integrated rotary knife for sheet metal cutting Foot pedal control

Condition: new, Year of construction: 2023, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at [phone number]). Seppi M. BMS 125 forestry mulcher / DEMO unit / Year of manufacture: 2023 / in stock & immediately available Price: €28,290.00 net / €33,665.10 gross - Working width: 1.25 m - Overall width: 1.56 m - Depth: 1.11 m - Height: 0.85 m - Mulcher for excavator attachment - Ideal for mulching in hard-to-reach areas such as roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches bushes and wood up to 30 cm in diameter - For excavators from 13 to 30 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Forged counter blades - Hydraulically adjustable rear hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids in sandwich construction, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 rotor with fixed tools with inserts made of tungsten carbide - 1 x MONO EXTREME V-LOCK L, part number 19702266 - 33 x MONO TIP V-LOCK, part number 19702259 - 1 x MONO EXTREME V-LOCK R, part number 19702267 - Wear-resistant tool holder - Interchangeable rotor stub shafts OPT 465 M-BOOST bevel gear piston motor - With automatic displacement regulation 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 80 - 170 l/min 3 hydraulic lines are required: feed, return, and drainage. The unit is supplied without hoses, fittings, and attachment plate. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, which are immediately available! Mr. Herden (Tel. [phone number]) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Bodpfx Apeznrvqsvodf We supply the complete Seppi M. product range for you! Errors and prior sale excepted! Please contact Marius Herden for further information.

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Bedpfx Asy H Akrspvedf Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: new, capacity 90 degrees: round 125 mm capacity 90 degrees: square 125x125 mm capacity 90 degrees: flat 130x125 mm 80 mm 80x80 mm 80x80 mm capacity 60 degrees: round 80 mm capacity 60 degrees: square 50x50 mm capacity 60 degrees: flat 80x80 mm sawband speed 30-80 m/min. dimensions of saw-band 1440x13x0,65 mm 190 mm output 230 V weight of the machine ca. 19 kg Domestic equipments: - Stepless speed regulation Bdsdpfeyv N Ezsx Apvof - Saw arm can be swiveled up to 60 ° right - Tape guides with 8 ball bearings - with stop

Condition: excellent (used), Year of construction: 1990, Single-action eccentric press ERL 125 HELMERDING 1990. Bjdpfx Apezlb Hmovsdf

Condition: new, Cutting capacity, round, 0°: 127 mm Cutting capacity, flat, 0°: 125 x 130 mm Cutting capacity, round, 45° right: 90 mm Cutting capacity, square, 45° right: 90 x 90 mm Cutting capacity, round, 60° right: 45 mm Cutting capacity, square, 60° right: 45 x 45 mm Vise opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speed: 60 m/min Motor power: 0.55 kW Voltage: 230 V Weight, approx.: 25 kg Features: - Saw frame swivels up to 60° - Ideal for cutting pipes, profile materials, and solid materials made of stainless steel, iron, etc. - Sturdy saw arm for vibration-free operation - Low noise due to robust design - Automatic shut-off after cutting is complete via a micro-limit switch - Quick-release vise for easy and fast workpiece clamping - Precise, adjustable saw blade guide for optimal cutting results - Environmentally friendly, as the use of lubricants and coolants is eliminated - Ideal for use on construction sites due to its low weight Bsdpfxjilk Eke Apvjdf - Base frame available as an option (not included in the scope of delivery) Equipment: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Base frame available at an extra cost: 129 euros net (special price)

Condition: new, Undercarriage suitable for the mobile bandsaw MIOTAL® S 125 G Bdodow Hxdujpfx Apvsf

Condition: used, Year of construction: 2003, operating hours: 7,174 h, 2003 | Genie S-125 (40m) | Used Telescopic Boom Lift | 7174 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 28400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 41 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Ready to work condition, no issues found Bdodpfx Aezipypepvef 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40974 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, POREBA TCG-125, 5-meter turning and grinding machine Year of manufacture: 1984, excellent condition DRO on all axes Turning diameter over bed: 1250 mm Turning length: 5000 mm Turning diameter over carriage: 940 mm Spindle bore diameter: 105 mm Workpiece weight between centers: 30 tons Workpiece weight + 1 steady rest: 35 tons Workpiece weight + 2 steady rests: 40 tons Faceplate 1250 mm included Bsdpfx Aszn Hk Aopvsdf 2 x steady rests included Regarding the accessories, we have: 1 x small steady rest 1 x large steady rest 1 x grinding attachment 1 x milling attachment with ISO mounting

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm Bdsdpfszimcbox Apvef - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 08/2027, overall weight: 700 kg, input frequency: 50 Hz, electrical fuse: 16 A, Spiral mixer Kemper F 125 A Bdodpfx Aoy H Utfspvof Spiral mixer with extendable bowl Dough machine with flour dust cover with safety circuit DGUV V3 tested Connection 400V, 16A-CEE plug Used machine You can find many more spiral mixers in our large showroom!

Condition: refurbished (used), Technical data: Bowl capacity: 300 l, Bdedpfx Aotuct Tepvsf Maximum dough volume: 200 kg, Number of speeds: 2, Number of motors: 2 (bowl/spiral), Number of timers: 2 pcs, Power supply: 380V/50Hz, Power: 6.2 kW, Dimensions: 850x1400x1480 mm, Weight: 680 kg.

Condition: used, Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outside/Inside: Ø 125/60.3 mm Bdsdpfxsd Sqyis Apvjf -Height: 58 mm -Number: 12x pillows available -Price: per piece -Weight: 1.3 kg/piece

Condition: used, Gear motor, electric motor -Speed: 125 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 525/200/H160 mm Bdodpfx Aoc U Tyhopvjf -Weight: 20.7 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 80 mm -Piston rod: Ø 36 mm -Stroke: 125 mm -universally applicable: -Number: 2x available Bdsdpfxod Erwaj Apvjf -Price: per piece -Dimensions: Ø 95/H575 mm -Weight: 19 kg

Condition: used, MIG/MAG hose package Bdjdpfed Sntfex Apvef -Length: 4.2 m -Water cooled -Weight: 1.9 kg