Used Ridgid 5008 1/4 Bis 1 " for sale (1,01,682)

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Approximately 1,000 new and used tires in various sizes from 17.5 to 24 inches are available in stock! Prices range from 50.00 EUR to 400.00 EUR per piece (net) depending on size, condition, and quantity! Isdpfxji Rlhvj Acaetk Upon request, we also have matching rims in stock, see -8724-! ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors.

Condition: good (used), Year of construction: 1973, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, Hydraulic 4-column press, manufacturer FIBRO, year of manufacture 1973, pressing force 315 t. Itjdpfx Asx Nhakecaek Dimensions approx. 3.0 m × 1.6 m × 4.5 m. Table size: 2.5 m × 1.5 m. Separate hydraulic unit and control panel. Maximum working area 883 mm (ram fully retracted). Powered, can be inspected on site. All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, URBAN AKS 6410/4 four-head welding machine, from right to left, maximum welding dimensions: 2,700 × 2,500 mm, Windows control system, weld bead limit of 0.2 mm for coloured profiles, previously operated on a single shift, technically refurbished and fully functional. Itodpfoznwq Tox Acaek

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Ratio: 45:1 Maximum fluid output pressure: 310 bar Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Iedjyx Irlspfx Acajtk Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Fluid inlet: ¼” Weight: 411 g Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼"

Condition: excellent (used), Year of construction: 2009, URBAN AKS 6910/4 four-head welding machine, reading from right to left, maximum welding dimensions: 3,000 x 4,000 mm, Windows-based control system, weld bead control with a limit of 0.2 mm for colored profiles, previously operated in a single-shift mode, technically overhauled and fully functional. Itjdpfxjzu Nv Ie Acaek

Year of construction: 2018, condition: excellent (used), ESPEC PL-4J Climate Testing Chamber / Temperature Testing Chamber Manufacturer: ESPEC Corp. Type: PL-4J Equipment Type: Climate Testing Chamber / Temperature Testing Chamber Year of Manufacture: 2018 For sale is a used temperature and climate testing chamber from the manufacturer ESPEC. The device is suitable for temperature and climate tests, environmental simulations, material tests, quality assurance, as well as development and stress tests. Technical Data Manufacturer: ESPEC Corp. Ijdpfx Aszntunjcaotk Type: PL-4J Temperature Range: -40 °C to +100 °C Humidity Range: 10 to 98 % RH Test Chamber Volume: approx. 800 liters Heating Rate: approx. 3 K/min Cooling Rate: approx. 2 K/min Internal Dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External Dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Power Connection: AC 400 V / 3~ / 50 Hz Max. Power Consumption: 21 A Weight: approx. 610 kg Refrigerant: R452A Refrigerant Quantity: 1.16 kg + 0.36 kg Equipment Touchscreen control Temperature and humidity control Program control Stainless steel interior Viewing window Interior lighting 100-mm cable gland Water-cooled condenser Castors for easy transport Application Areas Temperature testing Climate testing Environmental simulation Material testing Quality assurance Electronics testing Research and development Endurance and aging tests Workshop testing The climate chamber has been workshop tested. Functional testing performed. Humidity system repaired. Documented test run successfully completed. Scope of Delivery ESPEC PL-4J Climate Testing Chamber Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Note Collection or shipping by freight forwarder is possible by arrangement. Subject to changes, errors and prior sale.

Condition: good (used), material lift, roll lifter, assembly lift, carpet roll lifter, lifting lift Itjdpfx Aov Egk Iecask -Manufacturer: Eska, Materiallift carpet roll lifter 2 pieces / 1 set -Load capacity: max. kg -Lifting height: 415 to 1595 mm -Holder mandrel: see photos -Cable winch: Pfaff Price/Delivery: complete -Dimensions: 745/640/H1950 mm -Weight: 70 kg/piece

Condition: good (used), Year of construction: 2007, Single-stage reverse osmosis system. Model: R0 04-1 with EWMK40 2xRVMR1ACM Width: 880 mm Height: 1450 mm Depth: 380 mm Control cabinet dimensions: Width: 500 mm Depth: 250 mm Height: 500 mm Total weight: 120 kg Itedpozqtp Refx Acaok Condition: good, second-hand

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Machine in perfect condition, ready for production. Format: 500x700mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes electronically adjusted via computer 1 cross-cut knife First cassette extended. Continuous speed control via inverter control panel Itodszmu Hcepfx Acask Counter with batching function and folding speed indicator. Rietschle compressor. Raised soundproofing hood. Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Window cassette with control unit. Mobile delivery with continuous speed control.

Year of construction: 2016, condition: excellent (used), Vötsch VCS³ 7034-5 Climate Testing Chamber / Temperature and Humidity Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Year of Manufacture: 2016 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 335 liters For sale is a used Vötsch VCS³ 7034-5 climate testing chamber with temperature and humidity control, programmable touch panel control, and water-cooled design. This unit is suitable for professional temperature and climate tests, humidity tests, environmental simulations, material tests, electronics and component tests, as well as for research, development, and quality assurance. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Year of Manufacture: 2016 Temperature Range: -70 °C to +180 °C Humidity Control: included Water-cooled Design Operating Hours: approx. 3,485 h Test Chamber Volume: approx. 335 liters Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R404A, 2.50 kg Refrigerant 2: R23, 0.75 kg Equipment: Itedpszqmx Eofx Acaek Programmable Touch Panel Control Temperature Control Humidity Control Water-cooled Design Stainless Steel Interior Large Observation Window Test Chamber Lighting Separate Digital Temperature and Humidity Display Several Stainless Steel Inserts in the Test Chamber Program and Manual Operation Specimen Feedthrough Ø 125 mm Additional Specimen Feedthrough Ø 50 mm Front Main Switch Electrical Connection with approx. 3.5 m Connection Cable Connection for Condensate Drain / Overflow Cooling Water Connection Connection for Demineralized Water Compressed Air Connection Dimensions: External Dimensions (W x D x H): approx. 872 x 1,758 x 1,800 mm Internal Dimensions (W x D x H): approx. 580 x 765 x 750 mm Weight: approx. 585 kg Transport Data: Dimensions (W x D x H): approx. 872 x 1,758 x 1,800 mm Transport Weight: approx. 585 kg Condition: Used Optical condition as shown in the pictures. Scope of Supply: Vötsch VCS³ 7034-5 Climate Testing Chamber Programmable Touch Panel Stainless Steel Inserts as shown in the pictures Accessories as shown in the pictures Availability: by arrangement. Scope of supply as pictured. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 900, power: 3 kW (4.08 HP), Description Type: EH 400/1 Serial number: 900 Year of manufacture: 2004 Voltage/frequency: 400 V/50 Hz Rated power: 3 kW Boc Hpyfijw Niuho Dewt CE certified: Yes Device description: Industrial shredder or crusher (shredder/granulator). Notable features in the pictures: System with rotating blades (shredding unit) on a 2 mm shaft 3 kW SEW motor and reduction gear 8 mm screen (the screen is marked ‘8 mm screen’) – indicates the size of the output particles Rollable, transportable design Material discharge container and lower motor system Machines of this type are generally used to shred the following materials: Plastic Itedpfxszgblre Acaek Rubber Wood Light metal shavings Electronic scrap

Condition: good (used), Year of construction: 2000, functionality: unexamined, travel distance X-axis: 710 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: 430, Approx. 12,500 program operating hours Ijdpfx Acsy Izqgjastk

Year of construction: 2001, condition: ready for operation (used), Various lettershop and paper converting units are available. 1) MBO ET46 corner conveyor table, year of manufacture: 1991. 2) MBO ET46 corner conveyor table. 3) MBO Z2 knife folding unit. 4) Herzog + Heymann knife folding unit, year of manufacture: 2001. 5) MBO T45-2-X knife folding unit. 6) Böwe 310 Systec cutting module. 7) Nagel Citoborma 490 Vario SBT multi-spindle paper drilling machine. 8) Hunkeler paper unwind stand. 9) Herzog + Heymann shingle delivery, year of manufacture: 2001. 10) MBO FWIII 52/4 folding unit. 11) MBO T45-2-45/4 folding unit. 12) MBO FWIII 52/6 folding unit. 13) Hunkeler ARAW 50/20 paper unwind stand. 14) Böwe separating cutting module. 15) Herzog + Heymann 2-pocket folding unit, year of manufacture: 2006. 16) Herzog + Heymann 4-pocket folding unit, year of manufacture: 2001. An on-site inspection is possible. Itjdpfx Acoziphaoaek

Condition: good (used), Year of construction: 2016, machine/vehicle number: TAD174116002, Offer 26235 Technical data: Ijdpfxjzu Na Ho Acaetk - Working width: 4100 mm - Pressing force: 170 t - Distance between columns: 3600 mm - Overhang: 400 mm - Max. installation height: approx. 400 mm - Ram stroke: 225 mm - Working height: approx. 920 mm - Motor power: approx. 18 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 4800 x H 2750 x D 2300 mm - Weight: approx. 12500 kg - Includes: - Swivel arm – control panel with ESA control - For 4 axes Y1 + Y2, X, Z - Motorized back gauge with motorized height adjustment - Crowning - Safety – light curtain - 4-way universal die + split ram tool 4000 mm - Pointed tool 4000 mm - Ram tool 3000 mm - V-die 3000 mm - Electric foot switch - Side-mounted adjustable support arms

Condition: excellent (used), Vötsch Model: VCS³ 7034-5 Vötsch Climate Test Chamber, Water-Cooled With temperature change rate of 5 K/min Specifications for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.5 K Spatial temperature deviation: ±0.5 K to ±2.0 K Itjdpfxeziyx Ns Acajk Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Specifications for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.3 K Spatial temperature deviation: ±0.5 K to ±1.0 K Temporal humidity deviation in the center of the usable space: ±1% to ±3% RH Humidity range: 10% to 98% RH (Extended climate range: 2°C/95% RH regulated for a maximum of 2 hours) Exterior dimensions (W x D x H): 870 x 1700 x 1775 mm Test chamber dimensions (W x D x H): 580 x 765 x 750 mm Test chamber volume: approx. 335 liters Side ports: 50 mm and 125 mm Operating data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 9 kW Rated current: 20 A Customer-side fuse: 63 A slow-blow Refrigerant: R404A / R-23 Weight approx. 570 kg For your security as a buyer, please note the following: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data and information subject to change and errors!) Further questions can be answered by phone.

Year of construction: 2022, condition: new, functionality: fully functional, lifting height: 10,000 mm, main lifting speed: 6,300 mm/min, i=79, new, 2x available, with top block, with bottom block, without electrics, without DMF KBH 140 B4 + KBA 80 B4 Fine input gearbox F10 Itedpfxsq R N T Ao Acask Acid protection coating Various accessories on request

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Ijdpszg Twgjfx Acaotk Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2022, operating hours: 24 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, This 9-axis BLM DH4010 fully electric CNC wire bending machine was manufactured in 2022. It features a dual-head design with a maximum wire diameter capacity of up to 12 mm for wire with tensile strength of 600 MPa. The machine includes advanced programming software, realistic 3D simulation, and automatic wire feeding. If you are looking to get high-quality wire bending capabilities, consider the BLM DH4010 machine we have for sale. Contact us for further details. • Machine type: Fully electric CNC wire bending machine with automatic wire feeder • Number of axes: 9 Iedpfxjzqtgvj Acaetk • Configuration: Dual-head design with two wire bending heads • Maximum wire diameter: • Up to 12 mm (1/2") for wire with tensile strength of 600 MPa (87,000 psi) • Up to 10 mm (3/8") for wire with tensile strength of 1,000 MPa (145,000 psi) • Maximum distance between bending heads: 3,070 mm (121")The machine is equipped with VGP3D 3D graphical programming software featuring: • Realistic 3D simulation for part feasibility verification • Automatic collision detection • Cost estimation • Automatic machine cycle generation • Automatic optimization of the bending sequence Standard and Included Equipment • Centrally positioned 3D manipulator • Head-mounted grippers for workpiece holding and ejection • Variable-radius bending • 6-position bending turret • Automatic wire feeding unit • End-processing carriage with linear orthogonal wire cutting unit • Wire cutting capacity: up to 12 mm (1/2") for wire with a tensile strength of 600 MPa (87,000 psi) • Wire chamfering unit • CE compliantDH4005-03 • Tube straightener and RV straightening unitDHSD4-02 • Straightening rollers (9+9) with V-groove for wire diameters from 2 to 4 mmDHSD6-02 • Straightening rollers (9+9) with V-groove for wire diameters from 4 to 6 mm

Condition: used, Year of construction: 2017, functionality: fully functional, GF+ FORM 300 – EDM machine with WorkPartner 1+ automation For sale is a high-quality GF+ FORM 300 EDM machine with automated workpiece/electrode handling system WorkPartner 1+ automation, manufactured in 2017. The machine is from GF Machining Solutions (Georg Fischer) and is particularly suitable for the precise machining of demanding workpieces in the tool and die making industry. Machine features: • Manufacturer: GF Machining Solutions / GF+ • Type: FORM 300 • Automation: WorkPartner 1+ • Process: Ram EDM • Robust and precise design for professional production use • Automated loading through WorkPartner 1+ Ijdpoztn Adefx Acastk • Integrated machine control • Suitable for tool and die making, as well as demanding precision machining The depicted system is located in an industrial production environment and is in used condition, as shown in the pictures. The combination of GF+ FORM 300 and WorkPartner 1+ enables an efficient, automated production process and reduces manual intervention. This is particularly interesting for companies that want to expand their EDM capacity or implement an automated ram EDM solution. The machine can be inspected at any time, but it has already been dismantled and is no longer connected to the power grid. Therefore, a functional demonstration is not possible. The pallets and electrode holders can be purchased separately. Important note: The operating hours will be provided later, but the machine has hardly been used. Price: on request Inspection: possible by appointment Sale is preferred to commercial enterprises. The machine is sold used. Sale excludes any warranty for defects. All information is provided to the best of our knowledge, but without guarantee. Errors, prior sales, and changes reserved.

Condition: used, Year of construction: 2006, power: 31 kW (42.15 HP), input voltage: 400 V, input current: 53 A, input frequency: 50 Hz, travel distance X-axis: 3,685 mm, travel distance Y-axis: 1,575 mm, travel distance Z-axis: 265 mm, number of axes: 3, number of slots in tool magazine: 8, overall weight: 5,700 kg, Equipment: CE marking, Biesse Rover C 6.40 Config 1 FT CNC machining centre Description ROVER C 6.40 FT - numerically controlled machining center Working fields - configuration 1 - X= 3685 mm; Y = 1575 mm; Z = 265 mm CE Safety devices FT Work Table - dimensions X = 3685 Y = 1560 mm 6 Stops with a stroke of 115 mmBack work station 6 Stops with a stroke of 115 mmFront work station 4 Side stops with a stroke of 115 mm (2 Lh + 2 Rh) inclusive of the pneumatic system Vacuum system for 2 300 m3/h pumps 300 m3/h vacuum pump Configuration 1 Composition C1-A1 Boring head BH 22 L SLOT 1 Isdpfszgwa Sex Acaetk 9 kW (12.2 HP) Electrospindle, HSK F63 adaptor, air cooling Prearrangement for the assembly of a 360° operating unit (C axis) Revolving tool changer with 8 places Composition C1-P1 Automatic lubrication system Colour LCD in replacement of the standard LCD. Software update from BiesseWorks (machine version) to BiesseWorks Advanced (machine version) BiesseWorks - Advanced programming system CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test Volume: 335 liters Specifications for Temperature Testing: Temperature range: -70 to +180°C Time-based temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Iodpfx Acjziyxijaotk Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Specifications for Climate Testing: Temperature range: +10 to +95°C Time-based temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-based humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R452A / R-23 Important safety information for buyers: The following procedures are carried out on our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Recharging with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Subject to technical modifications and errors. All information is non-binding!) For further questions, please do not hesitate to contact us by phone.

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Iedszghf Eepfx Acastk

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine, type PMS 11-4 G3, 3-phase DC version - specifically designed for welding aluminum sheets - rarely used, completely inspected and cleaned - fully functional, ready for demonstration - rated voltage 400V/50Hz - rated power 96 kVA - welding current 23 kA - connection cable cross-section 10 sq mm/phase - fuse rating 63A - arm reach 1050 mm (!!) - electrode arm diameter 60 mm - electrode holder diameter 30 mm - electrode force 600 daN - stroke 65+25 mm - electrode cone MK2 - control unit MPS 8043/1 from Harms & Wende with current ramp-up and pulse function - with operating manual - 2-stage foot switch according to UVV standards - main machine switch - pneumatic maintenance unit - weight approx. 830 kg Iedpfx Acoh N Sc Eoajtk - complete documentation with wiring diagram, compressed air circuit diagram, and cooling water circuit - VAT can be shown separately - delivery from warehouse in Dresden approx. 4 days within Germany - export may take longer! On-site commissioning is subject to a charge and will be billed according to the actual effort involved. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment.

Year of construction: 2011, operating hours: 400 h, condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, i=61 used, good condition, complete with top block and bottom block, without electrics, DMF, without chassis, for mounting on EZ or as foot hoist Itsdpfx Aorbznnscask Engine ZBR132 C4

Condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 5,000 mm/min, in great condition, incl. load collective accumulator with high reserve, incl. hook block, electrics 400/230/24V, incl. central electrics for crane travel etc.! !Advantage no CAN bus control! also available as Craneset Itjdpfx Acoq R N Tqjask