Used Rolling Pin for sale (11,851)

Condition: used, mileage: 367 km, power: 184 kW (250.17 HP), first registration: 02/2026, fuel type: diesel, overall weight: 17,500 kg, axle configuration: 2 axles, color: red, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New vehicle M.A.N. TG3 17.5 t 4x4 All-Wheel Drive Special Roll-off Tipper with Day Registration. Payload: 9.5 tons, container lengths from 4.0 meters to 5.50 meters, Wheelbase: 4.50 m, 4x4 all-wheel drive with 3 differential locks, single tires, high-build design, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, trailer coupling, and much more. Includes MAN manufacturer's warranty. Lhodexdgllopfx Aqveg Equipment: - TN double cab with 3 seats - High-build design - Wheelbase 4,500 mm - Single tires - MAN D0836 LFLBN engine with 250 hp - Euro 6e - 4x4 drivetrain - Differential lock on front and rear axle - Unladen weight: 7,988 kg - Payload: 9,512 kg with a gross vehicle weight of 17,500 kg - Hiab XR 10 S roll-off tipper - Container lengths from 4.00 m to 5.50 m - Hydraulically extendable rear underrun guard - Hydraulic internal locking - Hook height: 1.57 m - Roll-off tipper control unit with cable extension - 2 additional frame tipper supports - 2-stage control for in and out - MAN G102 transfer case with road and off-road mode - Electronic transfer case lock management (VSM) - MAN PowerMatic 08.13 OD automatic transmission - PTO OPN0L Medium Duty ISO 21308 - MAN Idle Speed Driving function - MAN TipMatic Efficiency driving program - MAN TipMatic Offroad driving program - MAN TipMatic Emergency driving program - Air conditioning - Water auxiliary heater, 4 kW - AHK Maul Ringfeder Type RF40/G150B with air pressure connections - Permissible total towing weight: 28,000 kg - Towing capacity: 16,845 kg - Towing capacity central-axle trailer: 16,000 kg - Front and rear axle leaf-sprung - Front axle 9,000 kg, driven outboard planetary axle, engageable, with differential lock - Rear axle HP-1333, 13,000 kg, single tires on rear axle, with differential lock - Axle ratio: i=6.00 - Stabilizer for front and rear axle - Shock absorbers on front and rear axle - Electronic braking system EBS - High-performance engine brake MAN EVBec - Rolling start assist MAN EasyStart - Drum brakes front and rear axle - ASR ESP ABS - Emergency Brake Assist EBA - Front Detection - Tire pressure monitoring system (TPM) with tire temperature display - Driver attention monitor MAN AttentionGuard - Preparation for alcohol interlock - Cruise control - Multifunction steering wheel - 150 litre fuel tank - Roof hatch - Daytime running lights LED - LED rear lights - Headlamp stone guard - Electrically adjustable and heated exterior mirrors - Driver’s seat package, premium air-suspended; Co-driver’s seat package Plus - Air-suspended comfort driver’s seat with lumbar support and shoulder adjustment - Air-suspended comfort center seat with integrated belt system, set back - Air-suspended comfort passenger seat - New vehicle with day registration and MAN manufacturer’s warranty Price NET plus 19% VAT. We will be happy to provide you with attractive financing offers. All information subject to change. Errors and prior sale excepted. Internal vehicle number: 2562

Condition: new, mileage: 367 km, power: 184 kW (250.17 HP), fuel type: diesel, overall weight: 17,500 kg, axle configuration: 2 axles, color: red, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New vehicle M.A.N. TG3 17.5 t 4x4 All-Wheel Drive Special Hooklift Tipper with Day Registration. Payload: 9.5 tonnes; Container lengths: 4.0 m – 5.50 m; Wheelbase: 4.50 m; 4x4 all-wheel drive with 3 differential locks; single tires; high-clearance design; automatic transmission; air conditioning; auxiliary heater; tire pressure monitoring system; trailer coupling (AHK), and much more. With MAN manufacturer warranty Lhodpfx Aqjxdglreveg Equipment: - TN double cab with 3 seats - High-clearance design - Wheelbase: 4,500 mm - Single tires - MAN D0836 LFLBN engine, 250 HP - Euro 6 e - 4x4 drive - Differential locks front and rear axles - Kerb weight: 7,988 kg - Payload: 9,512 kg at 17,500 kg GVW - Hooklift: Hiab XR 10 S - Container length: 4.00 m to 5.50 m - Hydraulically extendable underrun protection - Hydraulic internal locking - Hook height: 1.57 m - Hooklift control unit with cable extension - 2 additional frame supports for tipper - 2-stage control for extension and retraction - Transfer case MAN G102 with road and off-road ranges - Transfer case lock management electronic (VSM) - MAN PowerMatic 08.13 OD automatic transmission - PTO OPN0L Medium Duty ISO 21308 - MAN Idle Speed Driving transmission function - MAN TipMatic Efficiency driving program - MAN TipMatic Offroad driving program - MAN TipMatic Emergency driving program - Air conditioning - Water auxiliary heater, 4 kW - Trailer coupling: Maul Ringfeder Type RF40/G150B with air pressure connections - Permissible gross train weight: 28,000 kg - Towing capacity: 16,845 kg - Central axle trailer towing capacity: 16,000 kg - Front and rear axle with leaf suspension - Front axle: 9,000 kg, outboard planetary axle, driven, engageable, with differential lock - Rear axle: HP-1333, 13,000 kg, single tires on rear axle, with differential lock - Axle ratio: i=6.00 - Stabilizer for front and rear axles - Shock absorbers on front and rear axles - Electronic Braking System (EBS) - High-performance engine brake MAN EVBec - Rolling-off prevention MAN EasyStart - Drum brakes front and rear axles - ASR, ESP, ABS - Emergency brake assist (EBA) - Front Detection - Tire Pressure Monitoring System (TPM) with tire temperature display - Driver fatigue alert MAN AttentionGuard - Preparation for alcohol interlock system - Cruise control - Multifunction steering wheel - 150-litre fuel tank - Roof hatch - LED daytime running lights - LED taillights - Stone chip protection for front headlights - Electrically adjustable and heated exterior mirrors - Driver seat package Premium air-suspended, Co-driver seat package Plus - Comfort driver's seat, air-suspended, with lumbar support and shoulder adjustment - Comfort center seat, air-suspended, with integrated belt system, set back - Comfort co-driver seat, air-suspended - New vehicle with day registration and MAN manufacturer’s warranty Price NET plus 19% VAT. Attractive financing options available upon request. All information provided without guarantee. Subject to errors and prior sale. Internal vehicle number: 2562

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 230 V, warranty duration: 24 months, working width: 180 mm, total width: 280 mm, total length: 475 mm, total height: 280 mm, DGUV certified until: 06/2028, type of input current: AC, conveyor belt width: 180 mm, NEW NEW +++ Bread Roll Moulder +++ NEW NEW Lhjdpfxjqy A Swo Aqvjg Sinmag Model: Piccolo Dough portion approx.: 20 to 80 grams Performance max. 2,000 pcs/hr Simple, robust technology Max. moulding length: 180 mm Only from us: DGUV V3 tested Connection: 230V Dimensions: 280 x 475 x 280 mm (W x D x H) Brand new machine, SAB tested 24 months warranty + spare parts service Options: Delivery service Maintenance contract Service package Training & commissioning Leasing & rental service More top bakery machines in stock!

Condition: reconditioned (used), functionality: fully functional, overall weight: 550 kg, total length: 730 mm, total width: 770 mm, total height: 1,500 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2027, type of input current: three-phase, year of last overhaul: 2026, Bun Divider-Rounder Fortuna Automat A 4 H Dough dividing and rounding machine TOP model bun press Very robust engineering! With rounding deactivation Head cleaning position Dividing head newly overhauled, 30-division Spare parts service Lodpfx Ajy Rhg Toqvshg With NEW stainless steel blade Only from us: DGUV V3 tested 3 rounding plates Connection: 400V, 16A CEE plug Dimensions approx.: 770 x 730 x 1500 mm (W x D x H) Refurbished and SAB-tested used machine With warranty Visit our large showroom!

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: 4axis autocalc, number of rollers: 4, roller (bottom) diameter: 240 mm, roller (top) diameter: 250 mm, side roll diameter: 180 mm, roller diameter: 300 mm, roller length: 4,100 mm, working width: 4,000 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, power: 5 kW (6.80 HP), input voltage: 400 V, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, model capacity 4000x6 mm CNC EVO plate roll Hydraulic 4 roll plate bending machine used year 2017 plate thickness rolling 6 mm pre-bend 4 mm minimum rolling diameter ID 300 mm plate max width on the rollers 4100 mm top roll size 250 mm lower roll 240 mm side rolls 180 mm Power on hydraulic unit 5,5 kw Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted with CNC EVO 4 axis Automatic plate roll programmable on drawing import from CAD station Rolling compensation upon plate different yield strength data input Hydraulic rotation central rolls driven Parallelism of the 4 rollers lifetime with torsion bar Lhedoy I Sp Tjpfx Aqvsg Pre-pinch setting upon plate real strength for best pre-bend Drop-end open front for unloading closed shells Re-rolling system for welded shells precise calibration. Safety and emergency stop installed Manuals and schematics service and instruction books

Condition: used, maximum load weight: 14,665 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2012, next inspection (TÜV): 04/2026, Equipment: ABS, * ABS Lsdpsy T Dipefx Aqvshg * 5-chamber taillights * Duomatik air connection * BPW ECO-Plus axles * Disc brakes ----Superstructure: Sliding skip loader trailer for containers up to 7 meters in length, pneumatic container locking system. For sale to commercial businesses only. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase agreements, invoices, proforma invoices, orders, and sales negotiations.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Table saw with sliding table TKU 315 Lhsdpfx Ajypm I Sjqvog - 220 Volt - Blade diameter: 315 mm - Year of manufacture: 1992 Margin scheme (differential taxation) Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: repair required (used), grinding diameter: 1,295 mm, grinding length: 4,276 mm, Manufacturer: Farrel Type: 50x14 CNC Control: NUM 760 Year of construction: 1970 Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: Concave grinding possible Covex grinding possible NUM 760 CNC Control Fixed steady rest 2 x Stones and Flanches included Specifications Metric US Standard Center height 647 mm Grinding diameter Ø 1295 mm Grinding length 4267 mm Grinding stone dimensions 914 x 152 mm mm Grinding stone speed 400 - 1200 Rpm Coolant system Yes Lhedpfsv Dia Ajx Aqvsg Dimensions (estimate) Length 8500 mm Width 4500 mm Height 3200 mm Weight 78000 kg Please note: The information on this page is believed to be correct and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they will not constitute a representation and contractual terms. We recommend that you review all important details.

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Lhsdpfxekvm S Nj Aqveg

Condition: good (used), Rolling width: 2050mm Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:21mm Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Lhjdewtpgtspfx Aqvog Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Width: 1500mm Height: 1600mm Weight: 5200kg

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight Lhsdpfxskvm Szs Aqvog 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), workpiece weight (max.): 80,000 kg, grinding diameter: 1,580 mm, grinding length: 7,500 mm, Manufacturer: Farrel Type: 60" x 24" Heavy Duty Year of manufacture: 1960 Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Specifications Metric US Standard Center height 930 mm Grinding diameter Ø 1860 mm Grinding length 7500 mm Grinding stone dimensions 1080 x 180 mm Grinding stone speed 400 - 100 rpm Tailstock 260 x 1250 Mk Coolant system Yes filter Yes Dimensions (estimate) length 13200 mm width Lhodpfx Aer Ikvmjqveg 4250 mm height 3200 mm weight 80000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Share on download Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanges / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930mm Grinding diameter Ø: 1860mm Grinding length: 7500mm Grinding stone dimensions: 1080 x 180mm Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 13200mm Width: 4250mm Height: 3200mm Weight: 80000kg Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Travelling wheel machine with CROWNING and CONCAVING grinding Equipped with stones / flanches / lubrication / coolant system Maximum diameter full size wheel 1550 mm Work swing over bed 1580 mm Work load 180,000 pounds (81,000 kg) Grinding length 7500 mm Center height: 930inch Grinding diameter Ø: 1860inch Grinding length: 7500inch Grinding stone dimensions:1080 x 180inch Grinding stone speed:400 - 100Rpm Tailstock: 260 x 1250Mk Coolant system: Yes Filter: Yes Length: 519.684inch Width: 167.323inch Height: 125.984inch Weight: 176449.6lbs Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill Aluminum Industry Non-Ferrous Industry Paper Industry Roll Manufactures Steel Industry Plate Mill Hot Rolling Mill Cold Rolling Mill

Condition: excellent (used), Year of construction: 1997, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 200 mm, side roll diameter: 280 mm, roller length: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,250 kg, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, power: 6 kW (8.16 HP), 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9604 Make: HAEUSLER Type: VRM-HY Control: HAEUSLER CNC Rolling width: 3000mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 200mm Bottom Roll Ø: 280mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Ledpfoy Expuox Aqvohg Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 6kW Length: 6000mm Width: 2000mm Height: 2000mm Weight: 7250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2004, control type: CNC control, controller model: Siemens, number of rollers: 4, roller (top) diameter: 12 mm, side roll diameter: 14 mm, working width: 3,100 mm, sheet thickness (max.): 14 mm, overall weight: 12,000 kg, total length: 5,000 mm, total width: 1,900 mm, total height: 3,900 mm, 4 roll plate bender HAEUSLER - VRM-HY 3000 x 14 MACH-ID 9611 Make: HAEUSLER Type: VRM-HY 3000 x 14 Control: Siemens Rolling width: 3100mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending: 10mm Number of rolls: 4 Rolling speed: 0-5 Top support: yes Length: 5000mm Lhodpfx Aqjy H A Uqjveg Width: 1900mm Height: 3900mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Ljdsvvvw Ejpfx Aqvjhg Specifications Metric US Standard Center height 787 mm Grinding diameter Ø 1574 mm Grinding length 5800 mm Grinding stone dimensions 914 x 101.6 x 304.50 mm Grinding stone speed 1800 rpm Dimensions (estimate) Length 15100 mm Width 5500 mm Height 3550 mm Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Lhsdpfx Aqekwcc Novjg Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Condition: new, Shaft diameter: 120roll diameter: 390motor power: 15length: 2000width: 1650heigth: 1900weight approx.: 4450 Standard Equipment • Steel construction frame • 3 rolls powered by hydromotor and planetary gearbox • Horizontal and vertical working position • Mobile control panel • Hardened standard rolls • Hardened and ground shafts made of high-tensile special steel • Digital read-outs (2 pcs) • 3-axis hydraulic lateral angle guide rolls • Two-speed working system • Hydraulic elements: Duplomatic (Italy) components used • Electrical equipment: Siemens (Germany) or Telemecanique (France) • Built according to EC safety directives (CE mark) and ISO 9000 certificate • User’s manual in English Options: Lsdpfx Ajy Hymqoqvshg - NC Unit 7 Screen EURO 7.500,-- Capacity Chart: NoProfile TypeSize Max Min. es1125x25 1200 Standard Rolls2200x50 1000 Standard Rolls365x65 750 Standard Rolls4Ø80 850 Optional Rolls5Ø5”x6,35 1500 Optional Rolls6Ø160x4 2800 Optional Rolls7120x40x4 1800 Optional Rolls890x5 1800 Optional Rolls9120x120x12 1200 Optional Rolls 10100x100x10 1200 Optional Rolls 11100x11 800 Standard Rolls12100x11 1000 Standard Rolls13100x11 800 Optional Rolls14UPN 220 1000Standard Rolls*15UPN 220 1200 Standard Rolls*16IPN 220 1000 Standard Rolls *17HEB 120HEA 14012001200Standard Rolls *18UPN 120 10000 Optional Rolls 19IPN 160 5000 Optional Rolls 20HEB 100HEA 12016004000Optional Rolls

Condition: used, Year of construction: 2002, sheet thickness: 8sheet length: 2000prebending: 6Upper Roll Diameter: 205Side Roll: 185messurements (LxWxH): 3850 x 1550 x 1420Standard Accessories Steel construction The adjustment of the rolls is made by hydraulic cylinders The rotation of the rolls is driven by individual hydraulic motors and planetary gears Pressure limit valves protect the machine against overloading Lhjdpfsy Hymwjx Aqvsg Pre-bending can be adjusted according to the operator’s selection and increases productivity Electrical control panel Portable control panel Conical bending system 2 pcs. digital readout for movement of both side rolls

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Lhodpfx Aqeyvvrhjvsg Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, sheet width 2050 mm plate thickness 4,5 mm pre-bending 4,0 mm Ledpfx Aqoyvvrbjvehg min. dia. 210 mm roll diameter 140 mm weight of the machine ca. 1530 kg dimensions of the machine ca. 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, sheet width 1250 mm plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg range L-W-H 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller Ledpfx Aqsyvvpyjvehg - induction hardened rolls

Condition: good (used), Year of construction: 2019, 1 used horizontal grinding machine Manufacturer: Granlund Lhedpoy Nxd Tefx Aqvjg Model: 650 XB Year of manufacture: 2019 Operating hours: 2905 Control system: Fanuc Series 31i - B Technical Data Max. workpiece length (mm): 300 Ring groove diameter (mm): 120–650 Grinding wheel diameter (mm): 356 Grinding wheel width (mm): 75 Quill stroke tailstock (mm): 45 Equipment Automatic grinding wheel dressing device 2 x tailstock Paper band filtration system Oil mist extractor Control cabinet with cooler Grinding wheel balancing stand Dimensions: 3800 x 2800 x 2200 mm Weight: 4500 kg Special Features Deep grinding can be carried out on soft blanks. This means that there is no need to produce or purchase pre-milled can blanks, as the machine completes the entire process. The machine is equipped with an automatic grinding wheel dressing cycle, including automatic compensation for wheel diameter and cutting speed.

Condition: used, Year of construction: 2025, color: grey-black, empty load weight: 1 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW OPEN-TOP ROLL-OFF CONTAINER FOR AGGREGATE WITH ROCK SPLIT AND REAR OPENING WITH TWO FOLDING DOORS REF.: 25-N-09 TYPE: aggregates NEW: yes LID: no OPENING: rear with two folding doors OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 4.00 m + 0.16 EXTERNAL WIDTH: 2.30 m INTERIOR/EXTERIOR FRONT SIDE: 1.10 m / 1.26 m INTERIOR/EXTERIOR REAR SIDE: 0.65 m / 0.82 m INTERIOR/EXTERIOR SIDE SIDE: 0.65 m / 0.82 mt MC : 6 WEIGHT: 1050 kg BOTTOM FROM: 3 mm WALL FROM: 3 mm COLOUR : grey RAL 7000 Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles, mainly specialized in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of over 50 trucks and over 150 skips, containers with and without hook-lift cranes ready for delivery. S.E.&O Ljdpfov Hid Tox Aqvshg Given the quantity of ads and details entered, Aurora invites you to verify the accuracy of the data entered with the sales staff.

Condition: used, Year of construction: 2024, color: grey-black, empty load weight: 2 kg, first registration: 10/2024, fuel type: gasoline, gearing type: mechanical, TITLE: USED DEMOUNTABLE FLATBED WITHOUT SIDE PANELS FOR TRANSPORT OF GOODS AND 20-FOOT SHIPPING CONTAINERS WITH TWIST LOCKS, PREPARED WITH MOUNTS FOR ADDITIONAL SIDE PANELS AND CENTRAL STAKES, REINFORCED FLOOR AT THE FRONT AND CENTER SECTIONS REF: 24-U-150 TYPE: flatbed without side panels NEW: no LID: no OPENING: all sides OVERALL DIMENSIONS TOTAL LENGTH: 7.10 m + 0.20 m EXTERNAL BOX WIDTH: 2.53 m FRONT PANEL: 1.80 m in TR1 WEIGHT: 2260 kg FLOOR: with wooden slats plus top layer in 5+2 mm checker plate steel SIDE WALL: / COLOR: white Lhsdpev Ap Udefx Aqveg Subject to errors and/or omissions. Displayed prices do not include VAT. Please contact our sales team for a current comparison of prices and terms. For more information: Loris: +39 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA Operating in the sale and purchase of industrial and commercial vehicles, with a primary specialization in the waste sector. Experts in trucks, trailers, and demountable equipment. We have an on-stock fleet ready for delivery with over 50 trucks and more than 150 bins and containers, with or without demountable cranes. E.&O.E. Given the number of listings and the information provided, Aurora invites you to confirm the correctness of the data with our sales staff.

Condition: used, Year of construction: 2018, functionality: fully functional, Roll forming machine, trapezoidal sheet roll former for roofing and facade sheets. Manufacturer - CONCEPT STAL Model - T-20 Lhsdpfxeww Nyns Aqveg Year of manufacture - 2018 Number of working stands with shafts and rollers - 20 pairs Sheet metal forming/cutting thickness - 0.45–0.6 mm Working width of sheet input - 1250 mm Rotary shears for cutting flat sheet Guillotine for cutting profiled sheet Receiving trolley on wheels Decoiler for sheet coils 5000 kg / 1250 mm with hydraulic expander and inverter - WIEPOFAMA Poznań Line length - 26 m Width - 1.8 m Height - 1.7 m Technical documentation (DTR) - available CE certificate - available Machine connected to power supply, ready for inspection.