Used Sandblasters for sale (320)

Condition: new, Year of construction: 2025, sandblasting containers allow flexible blasting in closed rooms at any location where it is required. Iisdsfnh Rwepfx Ahneg 8,89 x 2,35 x 2,69 m A closed sandblasting grit circulation using an integrated flat conveyor or screw conveyor floor, or via side-mounted recirculation channels, with optimal preparation of each blasting grit, ensures effective exploitation of the grit.Depending on the container size and required area output, one or more free jet pressure blowers can be used. The blasting nozzles of our tried and tested free jet pressure blowers are manually guided. Our free jet pressure blowers can be fitted with an automatic refilling system to ensure continuous operation without interruption for the blaster.

Condition: ready for operation (used), 20-foot sandblasting rental container with pressure blasting equipment, filter system, and safety equipment Iodpfoxl Dq Uox Ahnoig

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel - Pre-sieve - Weather protection cover - Water separator Iedpfx Aeynr Emohnoig - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Manufactured in Germany

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 2,400 mm, total height: 4,500 mm, total length: 3,800 mm, overall weight: 3,800 kg, inner dimension height: 600 mm, turntable diameter: 350 mm, Shotblasting machines with rotating satellites type PTR and SSR are designed to treat sensitive parts in singularly mode with any kind of shots. The nozzles are managed by a robot. The machine is equipped with a main indexed table that works as a pallet exchanger enabeling the entrance/exit of the parts into/out to the blasting chamber. The main table is equipped with 2 or 4 satellites; in accordance with production rate. One station is dedicated for loading/unloading, while another one (opposite to the loading area) is dedicated to the blasting/peening process. The nozzles are driven by a robot. The number of nozzles is defined according to the loading volume, the production rate and the geometry of the pieces. This machine is usefully for manual loading/unloading operation but it can be also equipped with an automatic handling device according to the process line request (2-axis gantry, robot…). Ventury system or Pressure type technology can be installed on such equipment. Installation of Magnetic Valves for shot flow check is also recomended. The machine can be equipped with up to three robots for peening. Iiodpowdgpgjfx Ahnjg

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, overall weight: 8,000 kg, inner dimension height: 600 mm, workpiece weight (max.): 20 kg, turntable diameter: 400 mm, The described shot blasting machine is designed for the automatic blasting or peening with selected media shots in accordance to the final finishing result to achieve. Part to be blasted will be positioned on suitable pieces’ holders that minimized the shadowing of the contact areas parts/jigs. The parts are inserted and extracted by an automatic cycle into the blasting/peening zones, by means of a step-by-step conveyor that can also operate in continuous mode. The parts, after passing through a neutral zone, are blasted / peened in the subsequent zones, prior unloading the parts are also blown. The system is equipped with one (1) loading/unloading position to allow easier loading/unloading during the process cycle Once the piece has been loaded with operator or automation, the cycle starts and the conveyor process a step forward, allows the newly loaded piece to enter the cabin and the simultaneous arrival of an already processed part at the unloading station. The machine works with masked times, therefore all the positions of the satellites equipping the conveyor are occupied in the cycle time, when fully operational. Iiedewdgrzepfx Ahnsg In the inner positions of the cabin the satellites rotate, and the shooting guns jets the blasting/peening media with a correct impact angle as from appropiate design.

Condition: new, Year of construction: 2025, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 1,500 mm, total height: 1,000 mm, total length: 1,500 mm, type of input current: three-phase, suction capacity: 1,500 m³/h, turntable diameter: 1,200 mm, Equipment: cabin, Wet-blasting machines PP-UM are designed to manage an homogeneuos mixture of shot, air, water and as requested detergent. The final result is a soft blasting process on the surface (in comparison to a dry blasting process). The common media blasting shots are corundum, silicates and glass beads. A special pump (heavy duty design for aggressive liquids) allows to maintain homogeneously the solution and delivers the mixture to the blasting gun/guns. The compressed air guarantee the correct shot impact on the surface (6-8 bars). The process can be manual or fully automated Iisdpfxjwdgi He Ahnog as machines model PP-UA, complete equipped with in-out motorized work table, 2 axis gantry robot…) allow to set a fully automatic process. The machines can be equipped with paper-filter in order to remove the light oil contaminants to the recirculating solution (avoiding the degreasing of the pieces before the treatment).

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A) Iiederq Hmzopfx Ahnjg

Condition: used, Year of construction: 1991, functionality: fully functional, For Sale – MICROPEEN Scale / Shot Blasting System MICROPEEN MPS 4-200-1S Overhead Rail Shot Blasting System / Scale Removal System with Filter Unit Description For sale is a used MICROPEEN overhead rail shot blasting system / scale removal system, including filter unit, control panel, and workpiece suspensions. This system is ideally suited for: - Scale removal - Cleaning - Rust removal - Surface treatment of steel components - Series and single part processing Iiodpfx Ahey N Tbmonog Workpieces are conveyed into the blasting cabin via an overhead rail system. An integrated extraction and filter unit is also part of the system. The machine comes from an industrial environment and is available immediately. Technical Data Manufacturer: MICROPEEN BENELUX B.V. Model: Sa Year of manufacture: 12/1991 Compressed air: 7 bar Voltage: 380/24 V System type: Overhead Rail Shot Blasting / Scale Removal System Equipment • Blasting cabin • Overhead rail system • Filter unit / extraction • Control panel • Pneumatic system • Workpiece carriers / hooks Condition • Used • Fully functional condition • Condition as shown in photos • Viewing by appointment possible • Immediately available Price €10,500 net negotiable Location Germany Search terms Shot blasting system, scale removal system, shot blasting machine, overhead rail shot blasting, sand blasting system, surface treatment, MICROPEEN, steel cleaning, shot peening Short version for platforms MICROPEEN MPS 4-200-1S Shot Blasting System Used overhead rail shot blasting system with filter system and control panel. - Year: 1991 - Compressed air: 7 bar - 380/24 V - Complete system - Immediately available Price: €10,500 net negotiable Ideal for descale and cleaning of steel components. Condition as shown in photos.

Condition: new, Year of construction: 2025, functionality: fully functional, air demand: 200 m³/h, total width: 2,400 mm, total height: 2,350 mm, total length: 3,500 mm, Cartridge filter system MBX-6000 with 8 cartridges. Suitable for filtering all types of dust, e.g. wood, sand, etc. Effective air output: 6000 m³/h, electric motor 9 kW, 3x400 Volt, 50Hz, filter area: 104 m² (8x13 m²), filter class: M, according to DIN 60335, filter cleaning: pneumatic, 10 min run-on. Dust containers: 4 pcs, each 30 liters. Isdpfx Ahox Ai Hponjig Clemco blasting pot (used), 100 liters Screw compressor Renner RSK 1-30, year of manufacture 2020, 1178 operating hours.

Condition: new, Year of construction: 2026, Desciption in english language after demand. Isdsdulhvopfx Ahnsig

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, total width: 1,900 mm, total length: 3,100 mm, total height: 4,350 mm, filter area: 288 m², suction capacity: 20,000 m³/h, Dust extraction unit, fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned by pulses of compressed air during operation, resulting in high device efficiency. The fan (built-in) is located on the clean air side, which minimizes the risk of explosion. Iodpfx Ajzd Twbohneig Parameters: Capacity up to 20,000 m3/h Filtration area 288 m2 Cartridge filter elements - 16 pcs. Motor power 15 kW Inlet diameter - 500 mm Dimensions: Height - 4.35 m Width - 3.10 m Depth - 1.90 m Weight approximately 1600 kg Stock number: 1146

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,200 mm, total height: 4,250 mm, filter area: 286 m², suction capacity: 18,000 m³/h, negative pressure: 3,500 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-operated for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. Ijdpfx Ahez Ayv Ujneig The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16 Year of manufacture: 2010 Cartridge filter elements, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 18.5 Kw Fan model: FR 501 Built-in frequency converter. Remote monitoring of the device is possible thanks to Donaldson's iCue technology. Capacity up to 18000 m3/h Inlet diameter: 630 mm Noise silencer included. New filter elements, custom-made according to the device's intended use, are also available on request. Stock number: 1155

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine This is a combo machine pelletizer and sandblasting machine (two in one) Isdpfx Ashmi Ucehnsig very low operation hours

Condition: new, functionality: fully functional, Year of construction: 2026, Dust Extraction System for Cabinet Sandblasting Machines The dust extraction system for cabinet sandblasting machines is a specialised extraction unit designed to improve visibility, cleanliness, and workplace safety during abrasive blasting operations. Equipped with a built-in 1100 W motor and an efficient filtration system, the unit ensures effective removal of contaminants from the working area. It is an essential component of every sandblasting cabinet, especially when used intensively in industrial environments. Main Advantages of the Machine 1100 W motor – provides high extraction performance while maintaining the unit's compact dimensions. Capacity of 3 m³/min – effectively removes dust and improves visibility inside the cabinet during operation. High-efficiency filter – captures fine dust particles, helping to protect the operator's health and improve the quality of the working environment. Stable construction – designed for operation with large sandblasting cabinets. Compact dimensions – allow easy installation near the cabinet, even where space is limited. Construction and Technology The extractor is equipped with an efficient 230 V/50 Hz electric motor that generates a stable extraction airflow, essential during intensive sandblasting operations. The unit's housing is made of durable materials resistant to industrial conditions. The 310 x 170 mm filter effectively captures even fine dust particles, preventing them from being re-suspended in the air. The 52 mm inlet diameter ensures compatibility with most sandblasting cabinets. Precision and Work Efficiency Thanks to its high-efficiency filtration system, the extractor eliminates excessive dust accumulation inside the cabinet, which directly improves the precision of the abrasive blasting process. Improved visibility allows for more accurate cleaning of components and reduces processing time. Reducing the amount of airborne dust also helps extend the service life of other cabinet components, such as lighting systems and door seals. Applications The unit is recommended for use with sandblasting cabinets featuring a large working area, where significant amounts of dust are generated. It is suitable for repair workshops, metalworking shops, and industrial production facilities where regular sandblasting requires clean air to be maintained. The extractor is compatible with most cabinet sandblasting machine models; however, attention should be paid to the different mounting-hole spacing used on the KDP200, KDP200TOP, and KDP220TOP models. Standard Equipment Integrated 230 V electric motor High-efficiency filtration system Housing with wall-mounting bracket 52 mm diameter inlet Technical Specifications Specification Value Extraction power 1100 W Capacity 3 m³/min Power supply 230 V / 50 Hz Noise level 85 dB Inlet diameter 52 mm Iijdpfxorh E Azo Ahneg Handle length 280 mm Extractor dimensions (height × diameter) 730 × 260 mm Filter dimensions (height × diameter) 310 × 170 mm Weight 9.5 kg

Condition: used, Year of construction: 2009, functionality: fully functional, total width: 4,300 mm, total length: 3,700 mm, total height: 3,000 mm, Description For sale is a Tonello Laser Blaze 250 industrial laser finishing system, offered as a complete enclosed workstation. This high-performance system is specifically designed for laser-based garment finishing, enabling precise and repeatable effects such as denim fading, whiskering, engraving, and decorative surface treatments. The Laser Blaze series by Tonello S.r.l. is widely recognized in industrial denim production, offering a modern and sustainable alternative to traditional manual processes. The system utilizes a Rofin CO₂ laser source, known for its precision, stability, and reliability in continuous production environments. This unit replaces labor-intensive finishing methods such as hand-scraping, sandblasting, and chemical spraying, significantly improving consistency, efficiency, and environmental impact. The machine has been used in a professional garment factory environment and has been tested in operation with video documentation (March 2026). Recently serviced on 27.02.2026. Includes • Tonello Laser Blaze 250 enclosed laser cabin • Integrated laser processing unit • Computer workstation with control system • Electrical cabinets • Cooling unit (MTA) • Ventilation / exhaust connections • Operator control panel and integrated safety system Technical Details • Manufacturer: Tonello S.r.l., Italy • Model: Laser Blaze 250 • Laser source: Rofin CO₂ Isdpfx Ahoy Ai Ehsnjig • Year: 2009 • Power: approx. 30 kW system • Voltage: 400V, 3-phase • Work area: approx. up to 150 × 150 cm • Application: Denim laser finishing and garment treatment Key Features • High-precision CO₂ laser technology for consistent results • Advanced control via Tonello CREA software • Capability for both flat and 3D (mannequin-based) processing • 360° garment effects without flat-pattern limitations • Double-position workflow for improved productivity • Fully enclosed workstation with integrated safety systems Technical Capabilities • Denim distressing (whiskers, chevrons, worn effects) • Laser engraving of logos, graphics, and textures • Photorealistic surface patterning • Multi-material capability (denim, leather, technical textiles) • High repeatability – identical results from first to last garment Sustainability Benefits • Eliminates need for sandblasting and manual abrasion • Reduces water and chemical consumption significantly • Lower energy usage compared to traditional laundry processes • Improves worker safety and production cleanliness Condition Used industrial condition. Machine is complete and was operational prior to factory shutdown. Tested and video recorded in operation (05–06.03.2026). Recently serviced (27.02.2026). Typical signs of use from production environment. Inspection possible prior to dismantling. Sold as-is, where-is, without warranty. Typical Applications • Denim laser fading and whiskering • Garment engraving and marking • Decorative textile finishing • Replacement for manual sandblasting processes Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling, loading, and transport. Professional dismantling strongly recommended due to system size and complexity.

Condition: reconditioned (used), Year of construction: 2020, machine/vehicle number: W20-0648-01, functionality: fully functional, Kiekens mobile dust extractor, type: DMF1258M-B1Z22, number: DM1200000, year of construction: 2020, 400 V, 3 Ph, 50 Hz, 16 A, 2.2 kW, weight: 330 kg, dimensions: 800 mm x 950 mm x 2100 mm, serial number W20-0648-01. The dust extractor was completely cleaned and checked. Dustmaster 1200 The Kiekens Dustmaster DM1200 series is designed to quickly and effectively extract (fine) dust. By applying the Kiekens K-series modular concept, the Kiekens Dustmaster DM1200 series can be widely used. The DM 1258 is designed for a variety of extraction processes, in either fixed, centralised or mobile applications, for: ƒ grinding / milling / polishing ƒ sandblasting / sanding , cutting / routing, ƒ packaging / mixing ƒ welding. ■ Extraction of powders, chips and fumes including: ƒ metals ƒ plastics / synthetics ƒ food / pharmaceutical ƒ rubber / leather ƒ wood ƒ others ■ A 2m or 3m extraction arm for variable extraction movement is optional. Principle of operation and benefits: The dust-loaded air enters the Dustmaster through the Ø160mm inlet via a hose or extraction arm (optional upon request). o The elbow arrests dust movement, and the tangential inlet causes a cyclonic effect to enhance the separation of the dust from the air stream. p The heavier dust particles are separated from the air stream and collected in the oversized 120 litre dust container. The large volume enhances dust settlement and allows longer operations. q The air streams upwards towards the powerful 2.2 kW industrial fan, which produces high suction performance. r The lighter dust particles are collected on the large high efficiency M class 5.8 m2 envelope (or 8.8 m2 cartridge) filter, with DM 1258M (ENVELOPE FILTER) ƒ Heavy-duty polyester needle felt (PNF) with Teflon coating, envelope-type filter design ƒ High efficiency, M class. Motor starter with phase indication lamp ƒ Filter monitoring pressure gauge; Filter cleaning handle for DM 1258 (motorised option available) High capacity 120 litres dust container provides high dust handling capacity. ƒ Castors for easy movement ƒ Detachable with simple release lever ƒ Special versions for the explosion zones 2 (gas) and 22 (dust) are available. Other zones and earthed options on request. Disposable bags can be used to line the container For the Romanian companies, there is the possibility of financing leasing in instalments with a minimum of 40-50% down payment. Price 4.200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten /Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare. Isdpfevccc Isx Ahnjig We speak English. /Wir sprechen Deutsch. / Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Dimensions: Height: 4.02 m Width: 3.95 m Iiedpfjy T Iyrjx Ahneg Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Iisdpozzp N Iofx Ahnjg Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: new, maximum load weight: 35,800 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Iiodpfx Aez Dmnwjhnog Chassis, gooseneck: Special steel frame made of high-strength fine-grain steels, electrically welded at the connection points, well-dimensioned outer frame. 3-axle arrangement. Wheel arch above the axles with spray mist suppression. All steel parts sandblasted. Lateral impact protection made of anodized aluminum mounted. Increased point load of approx. 30,000 kg over approx. 5,000 mm. Special design in the gooseneck area for maximum possible low-bed length in combination with the AluLeg outrigger supports, instead of telescopic outrigger winches, max. rear pivoting radius of the semi-trailer tractor unit 2,100 mm. Special superstructure with rear girder widening: DINKEL - special superstructure. Self-supporting aluminum roof beam / profile approx. 100 x 100 mm, sliding tarpaulin with plastic flaps. Rear girders can be widened to approx. 4,200 mm (only for loading and unloading). Three sliding girders per side with rubber strap relief. Additional center girder locking in the roof beam and parking position, by means of a pull cable and spring latch. DINKEL - lifting roof, mechanically height-adjustable. Lifting roof height approx. 400 mm, operable on both sides or on one side. Without opening the opposite side and the doors. Additional height adjustment of approx. 480 mm in approx. 40 mm increments, with height adjustment in the girders. Front cover on the front wall for operation under a tarpaulin up to a total height of 4,400 mm. Four rows of stackable approx. 150 mm aluminum slats on the side, with 450 mm pockets at the bottom, above 4 rows of individual pockets. In the upper bed, only 3 rows of insert slats. Evenly distributed spacing. Floor: approx. 27 mm special water-resistant glued beech - screen-printing panels, rough surface. Steel sheet in the wheel arch area. Forklift-compatible according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking/release safety valve). Spring brake cylinders as parking brake. Wabco Smart Board with odometer and unit load display. Including WABCO tire pressure monitoring system. Axles: 3 x 10,000 kg SAF/Sauer with drum brakes in a low-bed design. Air suspension with lifting and lowering device, total stroke approx. 230 mm. Third axle as a friction-controlled trailing axle with electric and mechanical lock. Twin tires: 235/75 R 17.5, -12-ply. Premium brand of our choice, including E-wheel chocks. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, top. Painting: Chassis with superstructure in RAL color of your choice. Center girders, axles powder-coated black. Corner girders in hot-dip galvanized design. Plastic parts black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment including: - E-supply line 15-pin - Air suspension in ECAS design, operation on the semi-trailer - Overwidth signs front and rear in galvanized, steplessly telescopic design with attached marker lights including sockets for flashing beacons (small signs) - Center girders with additional roof beam locking, by means of a pull cable - operation from below - Sliding tarpaulin support unlocking also from

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Iijdpfx Aoz Dmn Rshneg Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads. Fifth Wheel: * Fifth wheel plate with 2-inch King Pin. Rear Underrun Protection: * According to EC standards, bolted design. Side Underrun Protection: * According to EC standards. Landing Gears: * 2x 12 t landing gears with leveling foot and one-sided operation on the right side in the direction of travel. Axles: * 3x 9 t air suspension axle, manufacturer SAF, with disc brake approx. 430 x 45 mm, wheel mounting center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, including lifting approx. 110 mm and lowering approx. 70 mm. * Control of the air suspension via hand control with stop function. Steering: * Last axle mechanically forced steering. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Braking System: * Two-line compressed air braking system according to EC standards with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, fail-safe coupling heads permanently mounted on the front crossmember, without connection line to the tractor. * Manufacturer: Wabco. Tires: * 6, 385/65 R22.5 160J on rim 11.75 X 22,5 ET 120 - manufacturer of our choice. Including tire pressure monitoring system, tire pressure display in the driver's cab (pre-installation by the tractor manufacturer). Fenders: * According to EC standards, 1/4 PVC fenders in front of and behind the axle. Load Securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). * In the outer frame, a hole for lashing straps is provided every approx. 500 mm (lashing straps can be hooked into the closed side walls, beveled outer frame). Stake Pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed. * 4 rows of stake pockets transverse to the loading area. * Stakable stakes: 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. * Inside on the front wall, magazine for 20 stakable stakes. Front Wall: * Reinforced steel construction, fixed, inside covered with approx. 9 mm screen-printed floor (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame. Side Walls: * 4 x 25 mm side walls and rear wall made of extruded aluminum profiles, foldable and removable, removable Kinnegrip stakes. * Side wall and stake magazine: under the chassis. * Left and right insertion rails for side walls and stakes. Lighting System: * According to EC standards, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. * 1x 15-pin and 2x 7-pin connector on the front crossmember. Iijdpfoy Auhzjx Ahnog Equipment: * Chock with holder, two units. * Warning signs according to ECE 70. * Work lights on the lamp carrier (switched on via reverse gear). * Holder for rotating beacon on the rear, incl. rotating beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paint Finish: * Chassis and front wall sandblasted, primed and single-color top coated. * Chassis: hot-dip galvanized + R

Condition: new, Year of construction: 2026, The Josan S21 is a compact, robust, and powerful wheel loader with full equipment at an attractive price. With a lifting capacity of approximately 1,200 kg and a low overall height, it is ideally suited for low entrances, halls, stables, and farm work. Despite its compact design, the S21 features a spacious full cab with heating and ventilation. With an unladen weight of only approximately 2,200 kg, the wheel loader remains comparatively light and can be easily transported on a suitable trailer. The wide cab provides comfortable working conditions and good all-around visibility. ‼️ IN STOCK ‼️ AVAILABLE FOR ON-SITE INSPECTION ‼️ OUR COMPONENTS ✅ Nationwide FREE delivery to your farm! ✅ TÜV SÜD certificate ✅ TÜV Rheinland 2000/14 CE certified and tested according to German UVV guidelines (cab FOPS and ROPS certified) ✅ SOFT HYDRAULICS! We source our hydraulics from the same supplier that also sells to high-end wheel loader manufacturers. This ensures sensitive and precise raising and lowering of the pallet fork. Feel free to test it on our premises! ✅ POWDER COATED. Steel is sandblasted, then plastic powder is applied and baked in the oven. Our frame, tanks, boom, etc., are treated in this way. This provides extreme rust protection, which is INCLUDED! ✅ NEW! Larger luxury cab for more legroom. With reinforced steel, we now meet the current FOPS and ROPS standards! This is very important for your safety. ✅ AIR-SUSPENDED COMFORT SEAT adjustable to your weight ✅ NEW! LIFTING CAPACITY approx. 1200 kg! ✅ Hydraulic Euro attachment (standard EU dimensions) ✅ Up to 7 years warranty* ✅ Nationwide service by experts in our own workshop ✅ We stock all spare parts in Gemmrigheim. This allows us to ship parts within 24 hours. ✅ We have our own factory in China! ✅ Continuous monitoring during the production process ensures very high quality. ✅ Thanks to our know-how and good mechanics, we can also provide short-term and uncomplicated assistance after the warranty period (throughout Germany and Europe). Technical data: ➡️ Unladen weight ONLY approx. 2200 kg ➡️ Lifting capacity approx. 1200 kg ➡️ Dimensions (L x W x H): approx. 4200 x 2200 x 1600 mm ➡️ Euro 5 engines ➡️ All-wheel drive ➡️ Cab width approx. 1.25 m ➡️ Internal cab height approx. 1.35 m ▶️ Tipping height approx. 2.85 m ➡️ New with large comfort cab (internal width approx. 1.10 m) ➡️ Articulated steering ➡️ Adjustable steering column ➡️ Large all-round view ➡️ Hydraulic oil cooler ➡️ UVV NEW 1 year ▶️ Additional control lever to regulate the tilting speed of the bucket/fork ➡️ Automatic engagement of creep and fast speed ▶️ 2-stage torque converter transmission, electrically controlled ➡️ Electric joystick for forward and reverse movement with thumb on the joystick ➡️ Wide tires 31/15.5/15 AS profile (Note: only the narrow tires are shown in the picture) ➡️ 3rd and 4th control circuits with separate small joysticks ➡️ Float function ➡️ Safety belt ➡️ Bucket Optional: ➡️ AVAILABLE IMMEDIATELY! Combined pallet fork with attachment and tines (We have 1.20m tines and two spears, length approx. 90cm) ➡️ Euro attachment with hydraulic locking pins ‼️ We also have a wide range of accessories, from bale clamps and crocodile jaws to snow plows! Just ask. Net price €12,999.00 +19% VAT €2,469.81 Iiodpfeufwyzox Ahnjg Gross price €15,468.81 Errors and omissions excepted Images/text may vary *Please inquire about our warranty conditions.

Condition: new, Year of construction: 2026, ‼️ FREE DELIVERY WITHIN GERMANY ‼️ ‼️ ROAD REGISTRATION* ‼️ Josan – the EVERYMAN’S LOADER Robust, reliable, and affordable – without unnecessary frills. You can also order the wheel loader with a width of 1.30 m! ⚙️ OUR COMPONENTS: ✅ FREE delivery throughout Germany to your location! We have our own trucks and a logistics company. ✅ Road registration* from TÜV SÜD – available only from us! ✅ TÜV SÜD certificate ✅ TÜV Rheinland 2000/14 CE certified and tested according to German UVV guidelines (cabin FOPS and ROPS certified) ✅ SOFT HYDRAULICS! We source our hydraulics from the same supplier that also sells to high-end wheel loader manufacturers. This allows for smooth and sensitive raising and lowering of the pallet forks. Feel free to test it on our premises! We recommend testing it on other Chinese wheel loaders as well. ✅ POWDER COATED. Steel is sandblasted, then plastic powder is applied and baked in an oven. This is how our frame, tanks, boom, etc. are treated. This provides extreme rust protection, included at no extra cost! ✅ NEW! Larger luxury cabin for more legroom. With reinforced steel, we meet the current FOPS and ROPS standards! This is very important for your safety. ✅ AIR-SUSPENDED COMFORT SEAT, adjustable to your weight. ✅ LIFTING CAPACITY approx. 1200 kg! With an unladen weight of approx. 2300 kg including the bucket. ✅ Hydraulic Euro attachment (standardized EU dimensions) ✅ Up to 7 years warranty* ✅ Nationwide service by qualified technicians in our own workshop ✅ We stock all spare parts in Gemmrigheim. Therefore, we can send parts within 24 hours ✅ We have our own factory in China! Check out our website for pictures and videos! ✅ Through ongoing quality controls during the production process, we have achieved very high quality. ✅ Thanks to our expertise and good mechanics, we can also provide prompt and unbureaucratic assistance after the warranty period (throughout Germany and Europe). Technical data: ➡️ Own weight only approx. 2300 kg (with bucket) ➡️ Lifting capacity approx. 1200 kg ➡️ Dimensions (L x W x H): approx. 4500 x 1600 x 2550 mm ➡️ Tipping height approx. 2.83 m ➡️ All-wheel drive ➡️ Soft hydraulics ➡️ Euro 5 engines ➡️ Articulated steering with swing axle ➡️ Rear view camera ➡️ Luxury comfort cabin with air-suspended comfort seat & retractable seat belt ➡️ Enlarged step ➡️ Cab can be heated and windshield can be heated via ventilation ➡️ Electric joystick for moving forward and backward with thumb on the joystick ➡️ Radio with MP3 ➡️ Adjustable steering column ➡️ All-round visibility ➡️ Floating function ➡️ Hydraulic oil cooler ➡️ Additional control lever so that the bucket/fork tipping speed can be adjusted ➡️ Crawl speed and fast speed can be engaged automatically ➡️ 2-stage converter transmission, electrically controlled ➡️ UVV NEW 1 year ➡️ Tires as in picture 31/15.5/15 with AS profile (not standard 12.5/16) ➡️ Bucket approx. 0.6m³ (not standard bucket with 0.38 m³) Optional: ➡️ Road registration ➡️ Kubota engine ➡️ Pallet fork with attachment and 120cm tines combined with two bale spears with 90cm ➡️ Euro attachment with hydraulic locking bolts Iedpfx Ahjzf H Sbeneig ➡️ Stainless steel exhaust ✨ NEW! LIMITED EDITIONS ✨ Individual pieces: Natogrün & Pink Lady available and ready for delivery now! Net 12,499.00 € + 19% VAT 2,374.81 € Gross 14,873.81 € Josan – the future of construction Innovative, robust & affordable. *Please inquire about our warranty conditions. Image/text and equipment may vary. Errors and omi

Condition: new, functionality: fully functional, Year of construction: 2026, ‼️ROAD APPROVAL‼️ Josan – our budget-friendly loader Robust, reliable, and affordable – without unnecessary frills. Simple, easy-to-maintain technology without a laptop, computer, or complicated electronics. Our wheel loaders are powder-coated instead of just painted – a clear advantage against rust and de-icing salt. Whether for forestry, agriculture, equestrian facilities, construction sites, or commercial use: the all-purpose loader is versatile and available with around 20 different attachments – from buckets and clamps to sweepers and augers, as well as other specialized equipment. S22 Budget Loader means: Standard equipment ⚙️OUR COMPONENTS ✅ Road approval* from TÜV SÜD – available from us! ✅ TÜV SÜD certificate ✅ TÜV Rheinland 2000/14 CE certified and tested according to German UVV guidelines ✅ SOFT HYDRAULICS! We source our hydraulics from the same supplier who also supplies high-end wheel loader manufacturers. This ensures sensitive and precise lifting and lowering of the pallet fork. Feel free to test it at our facility! ✅ POWDER COATED. Steel is sandblasted, then plastic powder is applied and baked in an oven. Our frames, tanks, booms, etc., are treated this way. As a result, you get extreme rust protection, included in our price! ✅ NEW! Larger luxury cabin for more legroom. The steel has been reinforced again, so we now meet the current FOPS and ROPS standards! This is very important for your safety. ✅ AIR-SUSPENDED COMFORT SEAT adjustable to your weight. The seat is used by well-known EU manufacturers! ✅ NEW! LIFTING CAPACITY approx. 1200 kg! With an unladen weight of approx. 2300 kg including bucket – speaks for itself! ✅ Hydraulic Euro attachment (standardized EU dimensions) ✅ Up to 7 years warranty* ✅ Nationwide service by experts in our own workshop ✅ We stock all spare parts in Gemmrigheim. This allows us to ship parts within 24 hours. ✅ We have our own factory in China! Check out our website for pictures and videos! ✅ Through continuous monitoring of the production process, we have achieved very high quality. ✅ Thanks to our know-how and skilled mechanics, we can provide short-term and uncomplicated assistance even after the warranty period (throughout Germany and Europe). Technical data: ➡️ Unladen weight only approx. 2300 kg (with bucket) ➡️ Lifting capacity approx. 1200 kg ➡️ Dimensions (L x W x H): 4500 x 1300 x 2550 mm ➡️ Tipping height 2.83m ➡️ All-wheel drive ➡️ Soft hydraulics ➡️ Euro 5 engine ➡️ Articulated steering with oscillating axle ➡️ Comfort cabin ➡️ Bucket 0.6 m³ ➡️ Hydraulic oil cooler ➡️ Radio with MP3 ➡️ Adjustable steering column ➡️ Additional control lever to regulate the tilting speed of the bucket/fork ➡️ Automatic engagement of slow and fast gear ➡️ 2-stage torque converter transmission, electrically controlled ➡️ UVV NEW 1 year Optional: ➡️ Road approval ➡️ Rear view camera ➡️ Air-suspended comfort seat and retractable seat belt ➡️ Electric joystick for forward and backward movement with thumb control Iiedjxx Nyhepfx Ahneg ➡️ Tires as shown in picture 31/15.5/15 with AS profile (not the standard 12.5/16) ➡️ 3rd and 4th control circuits with separate small joysticks ➡️ Floating function ➡️ Stainless steel exhaust ➡️ Combined pallet fork with attachment and tines ➡️ Euro attachment with hydraulic locking pins Net 10,499.00 € +19% VAT 1,994.81 € Gross 12,493.81 € Josan – the future of construction Innovative, robust & affordable. *Please inquire about our warranty terms. Pictures/text and equipment may vary.

Condition: new, Year of construction: 2026, CORMAK 10 bar Diesel Compressor is a modern, fully independent source of compressed air, designed for professionals who require maximum performance and mobility in the field – wherever access to a fixed electrical power supply is unavailable. The unit combines advanced engineering, European manufacturing precision, and innovative design solutions to ensure reliable operation even under the most demanding working conditions. KEY ADVANTAGES AND FEATURES 10 bar operating pressure: Optimal pressure parameters ensure a stable supply for a wide range of pneumatic tools, construction machinery, sandblasting equipment, and drilling machines. Full mobility on its own wheels: A robust running gear mounted on heavy-duty wheels allows for easy transportation and effortless movement of the compressor directly to the work site. Third jockey wheel on the drawbar: The additional swivelling wheel mounted on the drawbar significantly facilitates precise positioning and manoeuvring of the compressor on construction sites or in confined working areas. Four independent levelling jacks: Allow the machine to be perfectly levelled, even on uneven or difficult construction terrain. Opening housing panels with gas-oil struts: Provide quick and wide access to all service components, ensuring convenient maintenance and periodic inspections. Built-in brake: Enhances safety during transportation and when the unit is parked on slopes. TECHNOLOGY AND PERFORMANCE CORMAK diesel compressors are designed using high-quality components, resulting in a long service life and low operating costs: Iodpfx Aszxzchjhnsig High-performance screw air end: The heart of the compressor ensures high effective output, continuous operation, and resistance to intensive use in industrial environments. Sound-insulated and durable enclosure: The robust construction with sound-insulating panels effectively reduces noise levels, improving operator comfort and minimising the impact on the surrounding environment. Advanced cooling system: A specially designed cooler combined with an efficient cooling system ensures optimal thermal conditions, even when operating under heavy loads and at high ambient temperatures. Intuitive control system: The electronic control panel enables full monitoring of key operating parameters, such as pressure and temperature, while facilitating diagnostics and maintenance planning. APPLICATIONS Construction and road construction: Powering pneumatic breakers, drills, wellpoint systems, and machines for plastering and spray painting. Service and field work: An indispensable source of compressed air wherever a 400 V mains power supply is unavailable. Heavy industry and installation work: Rapid support for production and installation processes in the field. TECHNICAL SPECIFICATIONS Parameter Specification Power 42.4 kW Air delivery 5,100 l/min Operating pressure 10 bar Drive transmission Direct drive Compressor cooling system Air/oil Oil capacity 45 L Air outlet valves 3 pcs. Battery 12 V DC – 790 A – 115 Ah Fuel tank capacity 44 L DIESEL ENGINE Parameter Specification System 4-stroke Displacement 2,615 cc Number of cylinders 4 Rated power at 2,000 rpm 42.4 kW Cooling system Air Lubrication system Oil Lubrication system capacity 10.2 L