Used Schelling Cutting Lines for sale (22,175)

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Podehzbipjpfx Airerc Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, cutting height (max.): 95 mm, cutting width (max.): 3,300 mm, saw blade diameter: 360 mm, Equipment: scorer, Technical machine data, SCHELLING Type fh 4 Nominal cutting length for saw 330: 3300 mm Maximum saw blade diameter (S): 360 mm Scoring blade diameter (V): 200 mm Maximum blade projection above table (U): 105 mm Maximum clamp opening (K): 105 mm Maximum stack height (P): (including total shaft heights and total maximum panel thickness tolerances) 95 mm Minimum panel thickness or stack height (P): (when using a strip aligner) 6 mm Minimum aligning force of the strip aligner: 250 N / pc Maximum aligning force of the strip aligner: 1700 N / pc Minimum working height of longitudinal saw: 970 mm Minimum overall height: 2115 mm Pedoyufixspfx Airerc Main saw motor power: 18 kW Saw unit forward speed: 5 to 160 m/min Saw unit return speed: 160 m/min Return feed speed - longitudinal saw: up to 80 m/min Mechanical lift table - for saw 330, max. panel width 2200 mm Hydraulic unit max. load capacity 7.5 t All information as provided by the manufacturer

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, working width: 22 mm, cutting force: 183 t, working length: 500 mm, TECHNICAL DETAILS Shearing force: 1,800 kN Pedpsyyb Hrefx Airerc Flat material capacity: 500 x 22 mm Square profile capacity: 150 x 150 x 15 mm EQUIPMENT Counter Numbering system

Condition: used, The CAT 500 cutting center is an automatic machine designed for cutting PVC profiles using a circular saw. The numerical control unit, together with the management software, allows the programming of machining parameters, leaving the operator with the sole task of loading the bars and unloading the finished pieces. Cutting type: 45° / 90° cutting (left) Adjustable angle cutting Blade specifications: Bore: Ø 30 mm Diameter: Ø 500 mm Speed: 3000 rpm Max thickness: 4.2 mm Technical data: Voltage: 380–400 V AC3PE Current: 8 A Frequency: 50 Hz Power: 3.8 kW Air pressure: 7 bar Weight: 2300 kg Standard accessories: Carbide blade Ø 500 mm (Ø30 bore) Electro-welded steel structure with leveling feet and floor anchoring Industrial PC on board the machine Motorized profile pusher with brushless motor Prsdoy I Twfepfx Airoc Motorized blade rotation (left) with brushless motor Feeding belts with inverter and acceleration/deceleration ramps Label printer Dimensions: Loader: 7900 mm MC: 1000 mm Unloading: 2600 mm Pusher: 6500 mm Max width: 2300 mm Max height: 1700 mm

Condition: new, Year of construction: 2025, COST CUTTING OPTIMIZER Superangle 600 is the ideal cutting center for angular and optimized cuts. A direct technological evolution of traditional cutting methods, Superangle 600 is able to increase productivity, guarantee maximum precision and maintain a simple and flexible process logic. EXTREMELY ROBUST Structure completely in thick and reinforced painted steel. Pusher support carriage mm. 300x345x25. Toothed belt width 50 mm. with 33 internal steel inserts. TECHNOLOGICALLY INNOVATIVE Electronic system consisting of a computer connected in real time to a latest-generation numerical control. Software in Windows environment. Complete with management of 5 qualities. 22” LED color video. Tele-service via internet. + Macro Excel. FAST Total optic system. Prjdpfx Aowk E Uueiroc Brushless electronic movement motor servo driver. Brushless electronic movement motor servo driver for angular cutting movement. Adjustable cutting speed. Two aligners. RELIABLE AND SAFE Transmission system with sliding on double tempered and ground guides. “Skf” ball bearing slides with double dust protection and automatic lubrication. Self-supporting electrical panel separated from the machine. Independent pneumatic adjustments to adapt to different types of processing. Maximum safety protection lock on the rear side.

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support Pedporn Sqhsfx Airsrc 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: new, Year of construction: 2025, Max. cutting section mm. 610x30 / 520x100 / 420x150 Structure completely in painted steel of large thickness and reinforced. Solid anchoring system to the ground with flanged steel feet for the hole. Predpfx Ajwk Ipheirec Two-hand safety cutting controls in ergonomic position. Independent pneumatic adjustments to adapt to the different types of processing. Progressive starter compressed air in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. Cutting time adjustable from 0.5 to 2 sec. Cutting speed adjustable via pneumatic regulator on the control panel. CUTTING UNIT: Cutting unit with extremely robust horizontal plane, equipped with galvanized idle rollers with capacity 600 kg, diameter 89 mm, width 500 mm. Tilting cutting movement with power transmission via a group of belts. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. End-of-stroke shock absorbers. Swing with bearings. Motor anchoring with easy adjustment for perfect 90-degree cuts. Easy maintenance with easy access. Blade motor power HP = 14.8 (11 kW). HM circular blade, diameter mm. 600. Cutting edges Z = 108. Hole diameter mm. 35 Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on the control panel. Intelligent presser: Automatic adaptation to the thickness of the wood, thus significantly reducing cutting times Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. The entire system is equipped with individual and independent pneumatic adjustments, external on the control panel, to adapt to the different types of work to be performed.

Condition: new, Year of construction: 2025, Max. cutting section mm. 280x95 / 240x125 / 340x15. Structure entirely in thick and reinforced painted steel. Solid ground anchoring system with flanged steel feet for the hole. Ergonomic two-hand safety cutting controls. Independent pneumatic adjustments to adapt to different types of work. Compressed air progressive starter in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. CUTTING UNIT: Cutting unit with horizontal plane. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. Shock absorbers at the end of the stroke. Swing with bearings. Motor anchoring with easy adjustment for perfect 90 degree cuts. Easy maintenance with easy access. Solid ground anchoring system with adjustable steel feet with perforated flange. Blade motor power HP=7.5 (5.5 kW). HM circular blade, diameter mm. 500. Cutting edges Z=108. Hole diameter mm. 35 Pedpfxowk Hime Airsrc Adjustable cutting time from 0.5 to 2 sec. Adjustable cutting speed via pneumatic regulator on control panel. Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on control panel. Intelligent presser: Automatic adaptation to wood thickness, thus significantly reducing cutting times Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. The entire system is equipped with individual and independent pneumatic adjustments, external on control panel, to adapt to the different types of work to be performed.

Condition: excellent (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, Sheffield HC-810 Automatic Hot/Cold Strip Cutting Machine with PF-33 Automatic Prefeeder For sale: Sheffield HC-810 industrial automatic hot/cold cutting machine, supplied together with the Sheffield PF-33 automatic prefeeder. The machine is designed for precise and efficient cutting of webbing, straps, tapes, ribbons, and other textile materials. The hot cutting function allows synthetic materials to be cut and heat-sealed simultaneously, preventing fraying and ensuring clean, durable edges. The equipment is suitable for industrial textile production, including the manufacture of tactical equipment, belts, straps, bags, backpacks, and other products requiring accurate, repeatable cutting. Main features: * Automatic hot and cold cutting * Maximum cutting width: 6¼ inches (approx. 159 mm) * Electronic control panel * Programmable cutting length * Adjustable feeding speed * Automatic piece counter * Adjustable blade dwell time for thicker materials * Automatic material feeding * Precise and repeatable cutting operations * Suitable for nylon, polyester webbing, straps, ribbons, and similar materials * 220 V version Included equipment: * Sheffield HC-810CE-220V automatic hot/cold cutting machine * Sheffield PF-33-220V automatic prefeeder * Original operating manual * Additional accessories and parts shown in the photographs Automatic feeding system: The Sheffield PF-33 prefeeder facilitates the feeding of material from rolls, ensuring a consistent material supply during automatic cutting operations. The combination of the HC-810 cutting machine and PF-33 prefeeder provides an efficient solution for repetitive industrial cutting tasks, reducing manual handling and improving production consistency. Technical condition: The machine is 100% fully functional, in excellent working condition, and ready for immediate use. All functions operate correctly. The equipment requires no repairs and is ready to be integrated into a production process. The machine is used but remains in very good overall condition, with normal signs of industrial use. Additional information: * Manufacturer: Sheffield Cutting Equipment * Model: HC-810CE-220V + PF-33-220V * Year of manufacture: 2024 * Purchase date: February 2025 * Condition: Used, fully functional * Availability: Immediately available * Location: Gdańsk, Poland The machine can be inspected and tested by prior appointment. Podpfx Aiez Nyv Tjrjrc The equipment is offered as a complete cutting and feeding system, including the accessories shown in the photographs.

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm Prsdpfx Ajgrug Reirsc edge trimming width: 5 - 60 mm speed: approx. 60 m/min

Condition: used, OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) is perfect machine for both tasks: cut-to-length cutting and longotudinal cutting of coil metal into strips with 2000mm coil width, 10mm maximum metal thcikness and 30t coils OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) Composition of the line: 1. Stocking ramp 2. Loading cradle 30t 3. Double cone uncoiler 4. Hydraulic peeler table Podpotvdy Isfx Airjrc 5. Arm with roll-press roller-bridge structure 6. Assembly including pinch-roll and pre-straightener 7. crop shear 8. tilting roller conveyor on pit 9. slitting shear shaft diam. 200mm 10. mobile side guide 11. tensioning rollway 12. side trim rewinder 13. burr crusher 14. recoiler + unloading crandle 30tons. 15. tensioning rollway to leveler 16. unger leveler 17. guillotine flying shear 18. pinch-roll for sheet ejection 19. stacker 20.roller conveyor for stack ejection 12mt. 21 hydraulic control unit 22. electrical equipment 23. tooling

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min Pedpfx Asgnygleirjrc

Condition: good (used), Wohlenberg 115 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture: 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing Features of the Wohlenberg Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Podpe Af E E Rjfx Airjrc Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: used, machine/vehicle number: 007816, Position 1: Automated Warehouse BIESSE-SELCO SK 450 Position 2: Beam panel saws with automatic warehouse BIESSE-SELCO SK 450 Pedpfjwuufqex Airsrc

Condition: ready for operation (used), Year of construction: 2007, Main motor (kW): 27 Infeed device Saw length (mm): 3300 Saw width (mm): 3300 Panel thickness (mm): 40 All specifications are manufacturer’s data. Prodpfx Aiszgwpgsroc

Condition: good (used), Perfecta 92 Paper Cutting Guillotine The machine is in very good condition, serviced and ready to use. Technical Specifications: Cutting width: 920mm Pedpe Af E Hnjfx Airerc Stack height: 120mm Minimum scrap: 18mm Weight: 2300kg Power supply: 400V Equipment: – Brand new programmer and complete control system – New photocells – Air table – Hydraulic clamp with variable force adjustment – Side tables – Tool kit – Spare blade

Condition: good (used), Perfecta 76 UC Paper Cutting Guillotine Pedpfxs Ad Hkfj Airsrc This machine is in very good condition. It has been in one hand since new. Technical specifications: Cutting width: 760mm Stack height: 110mm Weight: 1650kg Power supply: 400V Equipment: – LCD programmer – photocells – air table – cutting line – hydraulic clamp with variable force adjustment – manual – tool kit – clamp plate – spare blade

Condition: new, Year of construction: 2026, New slitting and cut-to-length with compact size decoiler. Machine modules: ✔ Decoiler up to 6000kg ✔ Side guides ✔ 5 roller straightener ✔ 5 slitter knives ✔ Polyurethane feed rollers ✔ Mechanical guillotine ✔ 7" Touch panel Machine parameters: • Dimensions L/W/H. - 3.3/1.5/1.2 m, weight 1700 kg • Sheet thickness (cut-to-length) : 0.5-1.2 mm • Sheet thickness (slitting): 0.5-0.8 mm • Max. coil weight: 6000kg • Coil width : 500-1275 mm • Inner coil diameter: 460-520 mm • Steel, galvanized steel and coated steel up to 400N/mm2 • Accuracy : 1mm/2000mm • Power : 3.2 kW Psdpfxjlgy Uhe Airerc Optional: ◦ Additional decoiler ◦ additional slitter knives and guillotine knives ◦ Automaticaly adjustable straightener ◦ Automaticaly adjustable slitter

Condition: new, Year of construction: 2026, functionality: fully functional, coil weight: 10,000 kg, number of straightening rollers: 6, conveyor belt width: 1,500 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, blade shaft diameter: 255 mm, sheet thickness copper (max.): 3 mm, inner diameter: 510 mm, outer diameter: 1,500 mm, mandrel diameter: 510 mm, mandrel length: 1,500 mm, coil width: 1,500 mm, coil outer diameter: 1,500 mm, number of blades: 8, warranty duration: 12 months, straightening roller diameter: 140 mm, total width: 1,500 mm, Slitting line model 1,500 x 3 mm, comprising: - Decoiler Aspo mod. 1500/5Ton (customizable) - Loading table - Feeder and straightener with 6 rollers, diameter 140 mm Pjdpex Hr S Sofx Airerc - Rotary cutter with 4 pairs of circular blades - Automatic punching unit with 20 customized punching stations - Mechanical shear - Aspo recoiler

Condition: good (used), Perfecta 92 TS ASE Paper Cutting Machine The machine is in very good condition, manufactured in 2011. This machine features a waste removal system. A unique machine on the market. Owned by the same company since new. Under a service contract until the very end. Technical Specifications: Cutting Width: 920 mm Stack Height: 120 mm Weight: 2000 kg Power Supply: 400V Pedpe Ad Hiujfx Airjrc Equipment: – ASE Automatic Waste Removal System with conveyor belt (automatically divided work table) – Programmer with 19” touchscreen monitor – CIP-3 and CIP-4 operation, cutting visualization on the monitor – Memory expansion via USB, network connectivity – Photocells – Air table – Cutting line – Chrome-plated table surface – Enlarged side tables – Servo-driven rear saddle control – super-fast operation, always stops at „0” – Hydraulic clamp with smooth force adjustment – User’s manual – Tool set – Press plate – Tapping block – Spare knife

Condition: used, empty load weight: 7,540 kg, maximum load weight: 14,460 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 08/2001, loading space length: 10,450 mm, loading space width: 2,430 mm, loading space height: 1,000 mm, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: crane, Vehicle location: Bovenden, aluminum rims, 1 axle, BPW axles, air suspension, forced steering, lashing eyes, supports, crane behind the house, emergency stop, foldable, 2-point hydraulic support, 3x hydraulic extensions, 1x mechanical extension. Prodpsi Rq I Njfx Airjc Superstructure: Crane Ferrari 7m/t, Honda GX 630 separate engine for crane hydraulics, crane, 2.66m = 2.35t, 11.29m = 0.47t. Crane: 2.66m = 2.35t, 4.19m = 1.545t, 5.89m = 1.015t, 7.69m = 0.73t, 9.49m = 0.57t, 11.29m = 0.47t, (mechanically possible for an extra charge, 13.25m = 0.34t), drum brakes, center and corner outriggers foldable, 2,000 crane operating hours. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Psdpfetk It Ssx Airsrc Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: used, machine/vehicle number: 190667 W 10, functionality: unexamined, power: 4.5 kW (6.12 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, Schelling stationary table milling machine, type FZ-4, Milling spindle D = 30 mm, Max. clamping length 140 mm, Max. height adjustment 100 mm, Motor approx. 4.5 kW, Table size 1100 x 900 mm, Predpfx Ao Af Ux Aeirjc Table height 860 mm, Weight approx. 740 kg, Incl. Holzkraft 3-roller feed system, As inspected at the Seevetal location, Ex works, excluding transport, Subject to prior sale.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes. Prjdpfezg D I Asx Airec

Condition: ready for operation (used), Year of construction: 2011, A panel storage system including a saw is available. 1) Surface storage Becker, year of manufacture: 2011, length: 24900mm, width: 14170mm, stack height: 2000mm, lifting height: 2100mm, max. panel dimensions X/Y: 4200mm/2100mm, min. panel dimensions X/Y: 1800mm/600mm, max. lifting weight: 250kg, travel speed horizontal/vertical: 120m/min/40m/min, stack positions: 38, panel capacity at 20mm panel thickness: approx. 3400pieces. Including saw linkage, offcut handling with automatic measurement and separation device. 2) Panel sizing saw Schelling fh 4, year of manufacture: 2011, max. panel dimensions X/Y: 4100mm/2100mm, max. panel thickness: 60mm, thickness tolerance: 0.2mm, max. saw blade diameter: 350mm, cutting length: 4200mm, feed speed: 80m/min. Including storage linkage, lifting and lowering device, central cleaning system, infeed and outfeed systems and further accessories. This is a complete and connected system, including control system, software and optimization connections. Documentation available. An on-site inspection is possible. Expected to be available August 2026. Prjdsyrtagopfx Airoc