Used Schelling Rotary Encoder Ih490-060Zr33-00010 for sale (4,590)

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 241.371, functionality: fully functional, operating hours: 4,700 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 46 A, input frequency: 50 Hz, cutting height (max.): 80 mm, cutting width (max.): 5,800 mm, saw blade diameter: 350 mm, saw blade bore: 30 mm, total length: 7,300 mm, total width: 7,600 mm, table height: 970 mm, year of last overhaul: 2025, plate length: 7,300 mm, platform width: 5,800 mm, Equipment: CE marking, documentation/manual, scorer, Electrical connected load: approx. 25 kW Voltage and frequency: 400 V / 50 Hz Mains system: TN with earthed neutral point Operating pressure: 6 bar overpressure Compressed air volume at operating pressure: approx. 143 l/min Knsdpfx Aksytfxwslsa Compressed air volume at standard pressure (1 bar): approx. 1000 l/min Extraction connection - pressure beam - longitudinal saw: 2 x Ø 120 mm Extraction connection - chip channel - longitudinal saw: 1 x Ø 100 mm Extraction connection - angle stop - longitudinal saw: 1 x Ø 80 mm Required extraction velocity: 25 m/s Extraction capacity: 3190 m³/h Required negative pressure at extraction ports: 2500 Pascal Nominal cutting length for saw machine 580: 5800 mm Maximum saw blade diameter (S): 350 mm Scoring saw blade diameter (V): 300 mm Saw blade projection above table (U): max. 95 mm Maximum clamp opening (K): 90 mm Maximum stack height (P): (including total wave heights and all max. panel thickness tolerances) 80 mm Minimum panel thickness or stack height (P): (with use of a strip aligner) 6 mm Minimum alignment force of strip aligner: 400 N / unit Maximum alignment force of strip aligner: 2000 N / unit Working height, longitudinal saw: 970 mm Overall height: 2070 mm Main saw motor power: 15 kW Saw unit feed speed, forward: 5 to 120 m/min Saw unit feed speed, return: 120 m/min Return feed speed – longitudinal saw: up to 80 m/min

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, cutting height (max.): 95 mm, cutting width (max.): 3,300 mm, saw blade diameter: 360 mm, Equipment: scorer, Technical machine data, SCHELLING Type fh 4 Nominal cutting length for saw 330: 3300 mm Maximum saw blade diameter (S): 360 mm Scoring blade diameter (V): 200 mm Ksdpfxjyufixo Akljna Maximum blade projection above table (U): 105 mm Maximum clamp opening (K): 105 mm Maximum stack height (P): (including total shaft heights and total maximum panel thickness tolerances) 95 mm Minimum panel thickness or stack height (P): (when using a strip aligner) 6 mm Minimum aligning force of the strip aligner: 250 N / pc Maximum aligning force of the strip aligner: 1700 N / pc Minimum working height of longitudinal saw: 970 mm Minimum overall height: 2115 mm Main saw motor power: 18 kW Saw unit forward speed: 5 to 160 m/min Saw unit return speed: 160 m/min Return feed speed - longitudinal saw: up to 80 m/min Mechanical lift table - for saw 330, max. panel width 2200 mm Hydraulic unit max. load capacity 7.5 t All information as provided by the manufacturer

Condition: used, Year of construction: 2003, TECHNICAL DATA SHEET 1. General Information Manufacturer: SCHELLING Anlagenbau GmbH Country of Origin: Austria Machine Type / Model: FX-H 430 / 400 Machine Number (Serial No.): 220.047 Year of Manufacture: 2003 Machine Condition: Used / Second-hand 2. Application Primary Application: Plywood cutting Kjdpfx Aksydimajlsna Material Type: Plywood sheets and wood-based panels Cutting Type: Straight panel cutting, industrial panel sizing 3. Electrical Specifications Supply Voltage: 400 V Frequency: 50 Hz Phase: 3-phase (3~) Rated Current: 40 A Installed Power: 21 kW 4. Mechanical / Functional Characteristics Machine Category: Industrial cutting machine Construction: Heavy-duty industrial steel frame Drive System: Electric motor-driven cutting unit Control System: Siemens components (to be confirmed) 5. Safety & Compliance CE Conformity: Applicable (documentation to be confirmed) Safety Features: Emergency stop, protective guards

Condition: good (used), Revent Single Rack Oven Rotary Rack Oven Complete with one mobile oven rack In good working condition Kodpsyw T D Djfx Aklona

Condition: new, Year of construction: 2026, HM08 Hydraulic Rotary Crusher Pulverizer for 20-30 Ton Excavators Knodpfx Akszvxb Ajlea Technical Data - Weight 2180 kg - Maximum opening 785 mm - Width 760 mm - Height 2669 mm - Nominal pressure 260-320 bar - Recommended flow 180-200 Lpm

Condition: excellent (used), Sullair ES-6 rotary screw compressor Technical details: 7,5 kW 10 bar capacity 0,97 m3/min weight 150 kgs runned hours: 7011 Kedpfxezt Nw Aj Akljna recently serviced

Condition: good (used), Poma LS 1300 rotary bookbinding shears Production in Germany. Shears in good condition, ready for production. The construction made entirely of cast iron ensures rigidity and repeatability of cutting. Kodpfx Akeztn S Solona Cutting width approx. 1300mm Ideal for bookbinding cardboard. Side margin. The machine has a feeder. 8 sets of knives Weight 1500kg

Condition: used, Rotary table, welding rotator, IMA MA Retainer AK2, Used machine Manufacturer: IMA Automation GMBH Type: MA Retainer AK2 Overall dimensions: Width: 1480 mm Depth: 1480 mm Height: 1620 mm Electrical data: 400V; Table diameter: 860 mm Knsdpfxjxupz De Akloa

Condition: used, Turntable, welding rotator, Bettinelli TR 210, Used machine Manufacturer: Bettinelli s.p.a. Italy Type: TR 210 Overall dimensions: Knjdpexxk H Asfx Aklja Width: 950 mm Depth: 950 mm Height: 830 mm Electrical data: 400V; 1.1 kW; 5.9A; 900 rpm Table diameter: 950 mm

Condition: used, Year of construction: 2006, Technical details: table load: 22 t table diameter: 2500 mm Total power requirement: 9,6 kW max. table load: 22.000 daN / 22000kg table rotating: links/rechts Grad table - inclinable: 0 - 120 Grad swival range +/-: 120 Grad height of the swivelling axis: 1700 mm machine weight approx.: 12000 kg rotary table revolutions per minute : 0,05 - 1,0 U/min connected load: ca. 5,0 kVA dimensions LxWxH: ca. 4,5 x 2,5 x 2,3 m Kedpfju Nkx Ijx Akljna Welding positioning turn-tilt table developed and manufactured by Müller Opladen ARC KON EWeding GmbH. Machine frame solid, welded steel construction with ball-bearing tilting device Table with centering grooves and T-slots for M24 according to DIN 650. Infinitely variable rotary drive from 0.05 - 1.0 rpm. Height to center of swivel axis 1700 mm hydr. tilt adjustment, infinitely variable from 0 - 120° Drive is designed for a torque of approx. 40,000 Nm at the turntable Accessories: 1x 2-row foot switch 1x remote control 1x working platform *

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Processing diameter: 4,200 mm Table speed: 12.3 min-1 Max. workpiece weight: 9,000 kg X-axis: 1,110 mm Processing height: 850 mm Workpiece height: min. 50 / max. 850 mm Control system: SIMATIC S7-300 Tool holder: Grinding segments Integrated dressing unit on the grinding head In 2010, the machine underwent a comprehensive mechanical and electrical overhaul. As part of this modernization, the entire automation and drive technology was converted to Siemens technology. Kedpfx Aszvxglsklona The machine is equipped with a MARPOSS P7 in-process measuring system. The measuring system is fully integrated into the Siemens SIMATIC S7-300 PLC control system via PROFIBUS.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: documentation/manual, foot remote control, Tilting device for containers, welding table, welding turntable, roller stand 3000 kg load capacity with foot-operated remote control Speed infinitely adjustable, 80 to 1600 mm/min. Diameter 40 mm to 1400 mm Roller diameter 200 mm Kjdpszu I Ipofx Aklena L: 800 x W: 370 x H: 450 Model or color variations possible Note: Height adjustment / support stand dimensions can be customized for an additional charge. Example as shown in the image. Additional charge: €1200.

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Injection pressure: 2090 bar Kodpfstrhv Sjx Aklena Weight: 5400 kg Pump drive power: 15 kW

Condition: good (used), Year of construction: 2013, Clamping Force: 60 tons (600 kN) Knsdpfx Akewp E Hzjloa Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: 25 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Rotary table diameter: 1100mm Clamping force: 90 ton Ksdpfeu Dbkdox Aklena Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Knedpowugczjfx Akloa Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 1,800 kN, M025 — Wittmann Battenfeld Wittmann Battenfeld HM 180/350H/210S* (-) CLAMPING UNIT • Clamping force: 180 T • Coining: NO • Max mold weight: - kg • Max mold weight per plate: 700 kg • Size between bars (WxH): 570x520 mm • Min mold height: 355 mm • Max mold height: x mm • Max stroke open: - mm • Centering ring FIX / MOVE: 125 / 125 mm • Fast clamping system: NO MOLD INTERFACE • Heating zones: 12 (24 pin combi TC/PW (6 zones per harting)) Knodjy Tn Enspfx Aklea • Water cooling circuits: 2+2 • Hydraulic circuits (cores): 3+1 • Hot runner sliders hydraulic (nozzles): x • Hot runner sliders pneumatic: 2+2 INJECTION UNIT • Screw diameter: 35/30 mm • Nozzle face + thread: R14,5+M35x2,0+R14,5+M35x2,0 • Injection unit type: 350H/210S • Screw stroke: - mm • Max injection capacity: - cm³ • Max injection pressure: 2080/2040 Bar • Max injection rate: 159/102 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: NO • Sockets 400V/16A: 6 • Sockets 400V/32A: 5 • Sockets 400V/63A: 0 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 2 • Air pressure ports: 3 • User inputs / outputs: 0 / 0 \+ Rotary table \+ Robot wittmann

Condition: new, table diameter 500 mm table load 300 horizontal kg table load 150 vertikal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Features: - The table can be tilted and locked at angles ranging from 0° to 90° - Manual tilting - Start/stop via a foot switch that can be used from any location - Selectable rotation direction: clockwise/counterclockwise - Rotation time adjustable - Welding machine controlled via control unit - 350-amp ground connection Scope of Delivery: - Control unit (integrated) - Foot switch THE ROTARY TABLE HOUSING MUST BE CONNECTED DIRECTLY TO THE BUILDING GROUND! CAUTION!! Vertical load limit: 150 kg only Kedpfx Aexabl Sjkljna

Condition: new, table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm total power requirement 230 Volt weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Kjdjxaatnopfx Aklona Scope of delivery: - control (integrated) - foot switch

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Clamping force 40 kN Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Kedpfxodzp T Ne Akljna Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame in relation to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with lead screw, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time continuously programmable - Riveting pressure adjustment continuously adjustable via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units, 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed on the support disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for the construction of a special machine. The riveting unit can also be easily removed and used as a conventional riveting machine by creating a suitable counter-tool.

Condition: used, Rotary Airlock Feeder, Rotary Feeder – Used Machine Manufacturer: VEM / VEB Elektromotorenwerke Thurm (GDR) Model: ZG3 KMRB 80 G 4 Overall Dimensions: Width: 1210 mm Ksdpfx Aszrwqnsklena Depth: 380 mm Height: 590 mm Technical Specifications: Motor Power: 1.5 kW Output Speed: 40 rpm Output Torque: 354 Nm Voltage: 220/380 V (Three-phase) Rated Current: 6.2 / 3.6 A Year of Manufacture: 1989

Year of construction: 2021, condition: excellent (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: HEINRICHSGLÜCK, swiveling welding rotator -Type: DK1.000-P800 -Load capacity: 1000 kg -Control: via foot pedal -Three-jaw chuck: Ø 380 mm, three-jaw chuck bore Ø 150 mm Knodpfxsy Ul D Ds Aklea -Base plate: Ø 800 mm -Speed: 0-1.5 rpm Right/Left rotation -Axles: 2 pieces -tiltable: electric -Height adjustment: No -Transport dimensions: 1430/1040/H1175 mm -Weight: 913 kg

Condition: excellent (used), Year of construction: 2002, Miwe Roll-in rotary furnace - used - year of manufacture 2002 - for sheet metal 60 x 80 - CS computer control system - new burner Knjdpszvw Riofx Aklja - 1 trolley - excellent technical condition - warranty - collection from the warehouse - price on request

Condition: used, centre height / mm weight 160 kg diameter 500 mm Kjdpfx Ajy S Dylsklsna

Condition: used, centre height / mm total power requirement / kW Knjdpjy Sul Eefx Aklea weight of the machine ca. 450 kg