Used Scraper Coveyor for sale (637)

Condition: used, Length: 480 cm Belt width: 90 cm Distance between scrapers: 32 cm Scraper height: 8 cm Side rail height: 23 cm Overall height: 47 cm Belt suitable for food processing Stainless steel Manufacturer: Haith We offer a wide selection of conveyors. If you need one with different dimensions, please inquire. Bsdpfx Afjzdvnpo Aodh Please check out my other listings.

Condition: excellent (used), Year of construction: 2016, I sell the fully equipped edge banding machine IDM Stefani Solution MDR T-ER4S, year 2016: Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Heating lamps Bedpfx Afsyw Aivo Aodh Edge banding with preheating tank / AirFusion included Material pressure zone servomotoric adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotoric adjustable Corner rounding 4-motor servomotoric adjustable / Multiradius unit Radius R2 scrapers servomotoric adjustable / Multiradius unit Glue scrapers manual adjustable Polishing brushes Separator spraying front and back STARTOUCH control system Barcode reader Working thickness adjustment servo driven Material height 10-60mm Edge thickness 0,3-15mm Feeding speed up to 25m/min. PUR glue possible. FE-MA-TECH unit included Second glue tank absolutely new included. Only 344.000 meters edgenbanded ! Very good condition, fully working!

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Processing units Joint trimming / pre-milling unit Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Current operating hours: 460 h Machine data Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Fuse rating: 20 A Short-circuit current: 5 kA Control voltage: 24 V Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone. Bdsdpfx Afey Exwfj Ajh

Condition: good (used), Chip conveyor, chip conveyor belt, coolant cleaning, chip disposal, scraper conveyor, scraper conveyor belt, chip chain conveyor, hinge belt conveyor, scraper belt conveyor -Manufacturer: COMAR, chip conveyor comes from a MIKRON VC 500D -Type: VC 500D -Conveyor belt width: 230 mm/320 mm -Outlet height: 1100 mm -Drive: 0.15 kW / 14 rpm (2.40 m/min) -Individual components: see photos -Dimensions: 720/2630/H1575 mm -Weight: 727 kg Bdjdpjy Ezacjfx Af Ajh

Condition: ready for operation (used), Year of construction: 1929, functionality: fully functional, machine/vehicle number: Nr. 17575, overall weight: 600 kg, total length: 2,300 mm, total width: 1,400 mm, total height: 2,000 mm, Lithographic press, also known as a scraper press, for manual printing from lithographic stones. Used by artists for lithography, in schools, art academies, and museums. Bdjdpfx Afsx A H I Dj Aeh The machine was last used in the workshop of the Gutenberg Museum in Freiburg for demonstrations and workshops. Stone format up to 80 x 130cm. Also very interesting as an exhibit in a lobby, restaurant, etc., or for production. Many squeegees in various widths are included as accessories, as well as 4 different hand rollers with leather coverings for inking the stones. The wooden table needs minor restoration. Lithographic stones in various formats can also be supplied.

Condition: used, mileage: 2,10,100 km, power: 265 kW (360.30 HP), first registration: 03/2015, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,420 mm, loading space length: 4,500 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, * Mercedes Benz 18 t, including complete winter service equipment and detachable rear crane * Mercedes Benz AROCS 2036 AK 4x4 * Color: Deep orange * Wheelbase 3,900 mm * Engine OM470, R6, 10.7 L, 265 kW (360 hp) 1800 Nm * EURO VI * Displacement 10677 cm3 * Engine drive Rear, C Bedpfozfyc Tjx Af Aedh * Hydraulic pump SEA A * Weight variant 22.0 t (9.0/13.0) * Winter service: increased front axle load 10.5 t * Transmission G 230-12/11.7-0.78 * Transfer case VG 2800-3W/1.45-1.04 * All-wheel drive Permanent * Mercedes Powershift 3 gearbox * Auxiliary drive for dump truck pump * Meiler three-way tipper with Bordmatic on the left * Municipal hydraulics by Schmidt * Mounting plate for snowplow size 5 * Turning assist system * Differential locks * Leaf-sprung suspension * All-round warning lights * Electric windows and mirrors * Air conditioning * Auxiliary heater * Tire front axle 385/65R22.5 * Tire rear axle 315/80R22.5 * Rear crane HIAB XS088BS-2HiDuo, year of manufacture 2014 * Crane with remote control X-SDrive * Crane weight without support 1070 kg * Lifting moment 71.0 - 86.0 kNm * Special high stand on the right side of the vehicle * Coupling system A * Küpper-Weisser single-chamber spreader, type IMSSN E29035HFA, year of manufacture 2015 * Container made of stainless steel * Frame Duplex * Control cabinet in stainless steel * Container volume 3.5 m3 * Hopper length 2900 mm * Screw conveyor * Spreader "OptiWet" * Spreading width 2-10 meters * Wet salt system - brine tank capacity 2240 l * Drive via the vehicle's municipal hydraulics * Lowering device RollTec 12 t * Control system "Vpad SN" * Snowplow Schmidt TARRON MS 34.1 * including coupling devices * year of manufacture 2015 * Clearing width straight 3400 mm * Weight 1060 kg * Scraper bar, combination * Splash guard (rubber) * Adjustable snow guard (fabric) * Plow lighting * and more * Errors and prior sale excepted

Condition: used, mileage: 2,10,100 km, power: 265 kW (360.30 HP), first registration: 03/2015, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,420 mm, loading space length: 4,500 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, * Mercedes Benz 18 t including complete winter service equipment and detachable rear crane * Mercedes Benz AROCS 2036 AK 4x4 * Color: Deep Orange * Wheelbase 3,900 mm * Engine OM470, R6, 10.7 L, 265 kW (360 hp) 1800 Nm * EURO VI * Displacement 10677 cm3 * Engine drive Rear, C * Hydraulic pump SEA A * Weight variant 22.0 t (9.0/13.0) * Winter service Increased front axle load 10.5 t * Transmission G 230-12/11.7-0.78 * Transfer case VG 2800-3W/1.45-1.04 * All-wheel drive Permanent * Mercedes Powershift 3 transmission * Auxiliary drive for tipper pump * Meiler three-sided tipper with Bordmatic on the left * Municipal hydraulics by Schmidt * Mounting plate for snowplow size 5 * Turning assistant * Differential locks * leaf-sprung suspension * Rotating warning lights * electric windows and mirrors * Air conditioning * Auxiliary heater * Tire size front axle 385/65R22.5 * Tire size rear axle 315/80R22.5 * Rear crane HIAB XS088BS-2HiDuo, year of manufacture 2014 * Crane with remote control X-SDrive * Crane weight without support 1070 kg * Lifting moment 71.0 - 86.0 kNm * Special high-position on the right side of the vehicle * Mounting system A * Küpper-Weisser single-chamber spreading machine Type IMSSN E29035HFA, year of manufacture 2015 * Container made of stainless steel * Frame Duplex * Control cabinet in stainless steel * Container volume 3.5 m3 * Hopper length 2900 mm * Auger conveyor system * Spreading material distributor "OptiWet" * Spreading width 2-10 meters * Wet salt system - brine tanks capacity 2240 l * Drive via the vehicle's municipal hydraulics * Drop-off system RollTec 12 t * Control "Vpad SN" * Snowplow Schmidt TARRON MS 34.1 * including mounting devices * all from year of manufacture 2015 * Clearing width straight 3400 mm * Weight 1060 kg * Scraper blade combination * Splash guard (rubber) * Adjustable snow dust guard (fabric) * Plow lighting * and more * Subject to errors and prior sale Bjdezfyddepfx Af Aedh

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 1235/1250P, cutting width (max.): 1,250 mm, working width: 1,250 mm, input current: 64 A, paper height (min.): 1 mm, paper height (max.): 10 mm, label length: 250 mm, working length: 1,235 mm, production capacity: 300 unit/h, STOCK LM 1235/1250P LAMINATION MACHINE | 1250 MM | GERMAN MADE For sale: STOCK LM 1235/1250P lamination machine manufactured by the German company Stock Maschinenbau GmbH. This machine is designed for laminating corrugated and solid cardboard with decorative paper, labels, and printed sheets, enabling the production of aesthetically pleasing packaging, promotional boxes, and display materials. The machine is equipped with an automatic gluing system, a label positioning system, and a pressure roller that ensures high-quality material bonding. Its robust German construction guarantees stable operation and low operating costs. Key advantages: • Working width of 1250 mm • Ability to laminate XL sheets up to 1620 x 1210 mm • Smooth speed adjustment • Smooth adjustment of the feed table movement • Automatic glue feeding and replenishment • Glue level sensor • Easy and quick adjustment of operating parameters Bdjdpfx Aozd Dwljf Ajh • Central lubrication system • Pneumatic clutch • Cycle counter • Safety system: safety bar and scrapers Equipment: • Semi-automatic label feeder • Table for manual feeding of plano sheets • Manual feeding of corrugated cardboard or die-cuts • Gluing unit with automatic glue feeding • Sensor for detecting and registering labels • System for positioning and applying cardboard • Pressure roller • Receiving table for stacking finished parts • Central frame for mounting die-cuts Technical data: • Manufacturer: Stock Maschinenbau GmbH (Germany) • Model: LM 1235/1250P • Year of manufacture: 1995 • Maximum working width: 1250 mm • Size of laminated sheets: up to 1620 x 1210 mm (length virtually unlimited) • Thickness of laminated materials: 0.8 - 10 mm • Performance: approximately 300 cycles/h • Power supply: 380 V / 50 Hz • Power: 18 kW • Power socket: 64 A • Machine dimensions: 6720 x 1910 x 1580 mm This machine represents an economical solution for companies seeking an efficient and reliable laminator for the production of premium packaging. The German construction guarantees durability, stable operation, and ease of use.

Condition: used, Year of construction: 2023, operating hours: 2,600 h, functionality: fully functional, total width: 18,500 mm, total length: 23,000 mm, compressed air connection: 6 bar, type of input current: three-phase, input current: 500 A, power: 275.5 kW (374.58 HP), space requirement length: 23,000 mm, space requirement width: 18,500 mm, For sale is a state-of-the-art, fully integrated wood pelletizing and shredding line (built in 2023) for processing A1-grade waste wood and disposable pallets into high-quality heating pellets. This turnkey complete system covers the entire process, from material feed to two-stage shredding, metal separation, suction and filtration technology, pelletizing, cooling, and bagging into big bags or smaller containers. Equipment: * Automatic scraper floor hopper with feeding system * AMIS shredder ZWS 1700 * High-performance cutting mill * Belt conveyor magnet and metal separator * SPÄNEX suction and filtration system with fire protection * GreCon spark detection system * 10 m³ material hopper with dosing system * 2 × ECOKRAFT pellet presses LP22 Bjdpfxozhbf Io Af Asdh * Rotary screen systems with conveyor belts * Big bag system and semi-automatic bagging system Technical data: * Year of manufacture: 2023 * Total connected load: 275.5 kW * Required fuse rating: 500 A / 400 V * Production capacity during test run: approx. 460 kg/h * Space requirement: approx. 23 × 18.5 m The system is in near-new condition and is available immediately. Detailed technical documentation with all components and specifications is available and will be provided upon request.

Condition: used, GRIESER Type: VPL 3.0 Total volume of the mixing chamber: 3.0 liters Usable volume: 0.3 to 2.0 liters Pressure in the mixing chamber: 0 to 1.2 absolute Pressure in the stainless steel double jacket: N/A Critical speed: 1800 1/min Speed range under load: Impeller mixing tool: 38-282 1/min Scraper: 9-90 1/min Rated voltage: 3/PE/50Hz, 400V L/PE/N/50Hz, 230V Control voltage: 24V DC Bdsdpfx Afjzix Ehe Ajh Power: 1.3 kW Rated current: 5.0 A Main switch: 32A Fuse: 16A Weight: 250 kg Sold from our location! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 0-201-22-3325, functionality: fully functional, workpiece length (max.): 5,800 mm, workpiece width (max.): 1,200 mm, controller model: Homatic-CNC System PC83 mit Windows NT 4.0, feed rate X-axis: 80 m/min, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on 20/03/2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: - Saw and crosscutting unit for tool changer - Drilling and milling unit (4 spindles) for tool changer - Combination flush-trimming and finishing unit for tool changer Bdjdpfjyic Tujx Af Aeh - Blow-off nozzle for workpiece edge, compatible with tool changer Attention: Except for the units listed above, no vacuum suction cups, tools, or tool holders (even if visible in images) are included in the scope of delivery! TECHNICAL DETAILS Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and lateral stops, 4-fold occupancy - Max. workpiece length (single occupancy): 5,800 mm - Max. workpiece length (pendulum mode): 2,200 mm - Max. workpiece width: 1,200 mm - Max. workpiece thickness (using standard 100mm-high cups) with edge: 60 mm (if extraction hood is in position 1) - Max. workpiece thickness (using standard 100mm-high cups) without edge: 60 mm - Max. workpiece thickness (using standard 100mm-high cups) without edge: 120 mm (if extraction hood is in position 2) Support equipment - Drilling head: 17 vertical spindles - 2x main spindle 12 kW, water-cooled, for HSK (speed 18,000 rpm with C-axis and 12-position carousel tool changer) - Separate Y-axis for second main spindle and interface for aggregates with integrated pneumatic and electrical connections - Electronic supply and swivel drive - C-axis: swivel range without limitation Edge banding unit, 360°, for insertion into right main spindle - Max. edge height: 65 mm - Pickup station right, for depositing edge banding modules - Pre-cutting station and 3-position roller magazine Adapter units - Combination flush-/radius trimming and finishing unit (profile scraper knife) - Saw and crosscutting unit - 4-spindle drilling/milling unit (crosshead) - Blow-off nozzle for workpiece edge MACHINE DETAILS - Control: HOMATIC control PC 83 with Windows interface (NT 4.0) EQUIPMENT - WOODWOP programming system, version 5.0 - Network connection - Laser positioning aid - Chip conveyor - Safety: pressure-sensitive floor mats at front, side safety cage; rear: wall installation Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 1,748 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, total height: 2,650 mm, total width: 2,530 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 3,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 20, product length (max.): 2,050 mm, number of axes: 3, This 3-axis DMG MORI ecoMill 635 V was manufactured in 2015. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine has a robust table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI ecoMill 635 V vertical machining center we have for sale. Contact us for further details. • CNC control: electronic handwheel • Operating hours: Power on approx. 13,550 h; Spindle cutting approx. 1,748 h • Table: 790 × 560 mm • Spindle: 12,000 rpm; SK40 / ISO40; Power approx. 13–17 kW • Tool magazine: 20 positions; Automatic double‑arm tool changer • Feed rates: Rapid traverse 30 m/min • Coolant: Flood coolant system • Drives: Digital AC servo drives • Electrical: 400 V / 50 Hz / 3‑phase; Rated power 17 kVA • Other: Machine connected and under power; very low spindle cutting hours for the year; good technical condition Additional equipment • Scraper-type chip conveyor Bedpfxoy T R I Es Af Aodh • Discharge height: 950 mm • Tank capacity: 200 l • Coolant spray gun for swarf removal • Standard 4-color signal lamp • PROGRESSline & Planolight package Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2015, operating hours: 9,000 h, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: WinMax / MAX5, table width: 508 mm, table length: 760 mm, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 24i was manufactured in 2015. It features an X-axis travel of 610 mm, Y-axis travel of 508 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 760 x 508 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 24i vertical machining centre we have for sale. Contact us for further details. Bdedpfx Afszc Rzie Aoh - Tool Holder: SK40 / CAT40- Max. Torque: 95 Nm- Max. Tool Diameter: 80 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 7 kg- Rapid Traverse X/Y: 38 m/min- Rapid Traverse Z: 32 m/min- Additional Equipment: Automatic centralized lubrication, Chip flushing system, Scraper belt conveyor, Coolant unit, Electronic handwheel, Network connection- Included in Delivery: CNC milling machine Hurco VMX 24i- Excluded Items: Vise, tools, clamping devices, other accessories

Condition: used, Year of construction: 1998, Second-hand machine Year of manufacture: 1998 Features and technical specifications: Bjdpfxjzk Nr Uo Af Aodh At 5,500 mm in length, the Quadromat is the shortest edge-processing machine capable of complete processing of edge banding materials with an integrated workpiece return mechanism . Not only are the longitudinal edges milled within the machine, but the end edges are also profiled, thereby completing the machining process. The finished workpiece is returned to the operator, no manual reworking is required. With PLC control, with up to 20 machining programmes Workpiece dimensions: – Minimum width: 60–80 mm (depending on the edge material) – Minimum length: 150 mm - Workpiece thickness: 10–50 mm - Glue bar thickness: 0.4–12 mm – minimum edge banding length: 400 mm Feed rate 18 m/min with 2 jointing motors with multifunctional milling unit (flush, chamfer, radius) with scraper blade with cross-cut saw with 2 glue pots (for transparent and white) and 1 spare pot Compressed air connection: 7–10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2005, x-travel 750 mm y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _____ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Bedpfxst Hw Tro Af Aodh Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Weight, approx. 11.000 kg Accessories / Special Features: This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit for cleaning agent application with buffing device for disposal of glue residue on PVC edges -Motor: 0.18 kW Bedpeb Sc Swofx Af Aodh -Speed: 1400 rpm -side: adjustable -height: adjustable -Number: 2x units available -Price: per piece -Dimensions: 390/350/H280 mm -Weight: 16 kg

Condition: good (used), Bale-Pak for pressing shavings in good condition including a scraper conveyor, an ABB stacking robot and an automatic plastic wrapper Bdedpfeimv N Tox Af Ajh

Year of construction: 2026, condition: new, Belt presses POWERPRESS 800 are designed for pressing fruit, berry and vegetable mass. Fruit mass is placed on the belt which presses it against cylinders.The obtained juice flows in the collection trays under the belt presses. Pressing is continuous. Capacity: 800 kg/h The most evolutionary feature of our belt press POWERPRESS line is integrated pump and juice collection tank into the press itself. That means that you save money and do not need an additional juice collection tank and pump which otherwise would use much space and money. There is a filtration sieve integrated into the juice collection tank. Because of that the machine filtrates the juice even during the pressing stage providing cleaner and more pure product. Bodpfxshu Ab Ds Af Asdh Entirely made of stainless steel. Has adjustable feet. The belt presses function automatically. When the tank of the mass is full, all other machines which come before belt press turn off automatically. When the juice tank is full, juice pump pumps the juice into the tanks. Includes High pressure washer. Has an integrated pump. Belt tension is adjustable. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. The cleaning of the belt is automatic with high pressure cleaner, scraper and brush. Pneumatic lifting of the security cover of the press ensures easier access when cleaning.

Condition: refurbished (used), Diosna W 240 A wendel mixer with 2 bowls 240kg dough Bedex Ttt Ropfx Af Aedh 2 speed enforced motor first speed 18kw, second speed 24kw digital control panel scraper shorter kneading time fast dough sequence lower dough heating suitable for all types of dough, thanks to the gentle kneading capacity in flour 150kg bowl contents 370 liter

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,136 h, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, table load: 400 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 16,000 W, number of axes: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • The machine was manufactured in 2007 but was retrofitted in 2016 Technical Machine Benefits • Hard disk: 26 gb • Integrated network card • Max. Torque: 100 nm (40% ed) • Temperature-controlled liquid cooling • Work area: fully encapsulated with roof, bellows (steel slats) • Installation: height-adjustable set-up elements • Matec hv 30 was overhauled in 2016 by manufacturer matec maschinenbau Extra Information Bsdpfx Afsx D Ix Tj Ajdh Cooling & Accessories Coolant: High-pressure Coolant Supply (20 bar, optional 40 bar) Paper Belt Filter (30 µm fineness) Tank Volume: 450 l Chip Conveyor: Integrated Scraper Conveyor Oil Mist Extraction: Electrostatic Filter (1000 m³/h) Measuring & Safety Technology Direct Measuring System: Linear encoder in all axes 3D Measuring Probe: Radio transmission to the control system Tool Monitoring: Laser-supported Tool Breakage Monitoring Tool Length Measurement (software) Optional Spindle (HSK 63-A): Higher Power: 30 kW / 190 Nm Drilling Capacity (steel): up to 60 mm Milling Capacity: approx. 500 cm³/min Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,975 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, total height: 2,720 mm, overall weight: 4,350 kg, This 3-axis AXILE V4 vertical machining center was manufactured in 2019. It features a robust table size of 770 × 410 mm with a maximum load capacity of 400 kg. Equipped with a high-speed ISO40 spindle capable of 12,000 rpm, it ensures efficient machining. The machine includes a 30/32 tool arm changer and a rapid traverse rate of 36 m/min, enhancing productivity. Consider the opportunity to buy this AXILE V4 vertical machining center. Contact us for more information. Additional equipment • T-slots: 16 × 100 mm (4 pieces) • Speed: Standard: 12000 rpm /Optional: 18000 rpm or 24000 rpm • Motor power: Heidenhain: 10/12.5 kW /Siemens: 10.5/15.8 kW /Fanuc: 11/15 kW/ Optional: 20 kW • Axial Accuracy Control (AAC) / Spindle Vibration Supervision (SVS) / Tool-tip Positioning Control (TPC) • Standard: 30 or 32 tools/ Optional: 40 tools • Tool holder: BT / CAT / DIN 40 / HSK 63 /Change time (tool-to-tool): 1.55 s (50 Hz) / 1.31 s (60 Hz) • Max. Tool dimensions: Diameter: Ø75 mm (Ø125 mm with empty neighboring compartment) / Length: 300 mm /Weight: 7 kg • Tool changer (ATC) Type: Arm change • ISO40 in-line spindle (12000 rpm, with CTS function) / Spindle oil cooler / Arm tool changer (30/32 tools) • Coolant tank (20 bar) / Scraper chip conveyor / Linear encoder for all 3 axes / Backwash device / Flushing gun / Heat exchanger / 4th axis prepared (switching circuit) Machine Benefits Technical Machine Benefits Bedpfx Afsx D Iydo Ajdh • Table: size: 770 × 410 mm / height: 820 mm / max. Load: 400 kg • Accuracy: repeat accuracy (x/y/z): ±0. 01 mm / positioning accuracy: 0. 01 mm over 300 mm / feed speed (rapid traverse): 36 m/min (x/y/z) • Guide rails: linear guideways (35 mm ball) x: 300 mm distance/ y: 620 mm /distance z: 400 mm/ distance • Axis drive: recirculating ball screws: Ø32 × p12 × c3 (for x, y, z) • Max. Load weight: 160 kg (standard) / 200 kg (optional) • Floor area: 3195 × 1910 mm • Spindle center to z-axis guard: 475 mm/spindle nose to table: 100-550 mm Dimensions Machine Depth 3195 mm

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Features: - Aggregate control via touch-screen - Joint milling unit - Glue pot - End trimming unit - Radius milling unit - Radius scraper unit - Flat scraper unit - Buffing unit - Spraying unit (front and rear) Location: Rhineland-Palatinate Availability: By arrangement Bdsdpfx Ajx Enquof Aeh Sale on behalf of customer. Details provided without guarantee.

Condition: ready for operation (used), Year of construction: 2000, spindle motor power: 22,000 W, total height: 2,050 mm, overall weight: 4,000 kg, controller manufacturer: INDEX, controller model: C200-4 / C200-8, This 5-axis Index G200 C turn-mill centre was manufactured in 2000. Consider the opportunity to buy this Index G200 C turn-mill centre. Contact us for more information. Additional equipment Bedpfeyailzox Af Asdh • Synchronous device for counter spindle machining • Tool carrier 3 for synchronous spindle (rear end machining) • Additional milling spindle • Thread milling and polygon turning device • Gripperless tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • with c-axis • no driven tools Machine Benefits Technical Machine Benefits • Space requirement (without material guide): 3580 x 3108 mm • Control unit: resolution: 0. 001 mm (input/output/correction) • Comprehensive movement range with multiple axes configuration • High precision with 0. 001 mm resolution in numerical control • Versatile expansion stages and additional equipment for enhanced functionality Extra Information Movement Cross slide 1 (top) - XYZB axes: X-axis: Slide path 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Slide travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Slide path 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotating): 360° swivel range, angular steps 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross slide 2 (bottom) - XZ axes: X-axis: Slide travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Slide path 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Turret Turret right: X-axis: Slide path 120 mm Z-axis: Slide travel 400 mm Tail Stock Center distance: 400 mm Pressure force (max): 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Delivery rate: 18 l/min System pressure: 90 bar Filling capacity: 70 liters Cooling lubricant system: Pump capacity (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Filling quantity: Approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Counter spindle: D140 external mount (only tensile clamping permitted for collet and chuck clamping) 1st spindle data (main/counter spindle): Spindle clearance (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle Ø in front bearing: 75 mm (with 30 mm clearance) / 85 mm (42 mm) / 100 mm (60+65 mm) Speed (max): 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Chip diameter (workpiece Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm

Condition: reconditioned (used), functionality: fully functional, conveyor belt width: 615 mm, total width: 1,800 mm, total length: 1,195 mm, total height: 1,220 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 08/2027, electrical fuse: 16 A, year of last overhaul: 2026, opening width: 30 mm, working width: 615 mm, space requirement height: 1,220 mm, space requirement length: 1,195 mm, space requirement width: 1,800 mm, type of input current: three-phase, TOP Dough Sheeter Seewer Rondo SKO 64 for all types of dough, for sheeting and rolling Pressure plate with adjustment with long roller/long scraper at the bottom with a collection tray robust, mobile dough sheeter all belts and scrapers are NEW DGUV V3 certified – only available from us Connection: 400V, 16A-CEE plug Dimensions: 1800 x 1195 x 1220 mm (W x D x H) Used machine, refurbished & SAB inspected with warranty + spare parts service Bodpfxsx Ht Hks Af Aodh Option: Delivery service Maintenance contract Service package Spare parts box Training & commissioning We have many other dough sheeters in stock!

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Glue tank with glue roller Pre-cutting knife 4 pressure rollers 2-motor cutting unit Radius milling unit Flush milling unit Bdedpfxswpm Ige Af Aeh Radius scraper Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Shipping dimensions: 370x100x125 cm Weight: 1330 kg Location: Röllbach Availability: short term