Used Siebdruck-Service Tic Sfm-650 Dhe for sale (22,359)

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Gkodpexnzlhefx Apwsa Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 6,752 h, load capacity: 5,000 kg, lifting height: 4,550 mm, free lift: 2,250 mm, load center: 600 mm, fuel type: gas, mast type: duplex, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,100 mm, fork width: 50 mm, fork thickness: 130 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23 X 10 - 12, rear tire type: cushion tires (black), rear tire size: 355 X 65 - 15, overall weight: 12,200 kg, empty load weight: 7,200 kg, total height: 2,600 mm, total length: 2,450 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, # 🚜 COMBILIFT C5000L | ⛽ LPG | ⬆️ DUPLEX 4550 MM | ↔️ SIDE SHIFT | ⬆️ FULL FREE LIFT | ✅ READY TO WORK ## 🔧 FULLY SERVICED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY If you are looking for a forklift that generates value from day one, rather than creating unexpected maintenance costs, this is the right machine for you. We are offering a fully inspected and work-ready COMBILIFT C5000L multidirectional sideloader. The truck has undergone a comprehensive technical inspection and extensive operational testing and is ready for immediate use in manufacturing plants, warehouses, and logistics centers. ## ⭐ KEY ADVANTAGES ✅ Full service completed before delivery 🛡️ Start-up warranty 🛞 Brand new super elastic tires ✨ Excellent technical and cosmetic condition 🚀 Ready for immediate operation with no additional investment required 🎥 Live online machine demonstration available 🚚 Direct delivery to your facility available --- # 📋 TECHNICAL SPECIFICATIONS 🏭 Manufacturer: COMBILIFT 🚜 Model: C5000L 📅 Year of Manufacture: 2016 🏋️ Load Capacity: 5000 kg Gkedozq S Thopfx Apwja ⛽ Engine: LPG ⏱️ Operating Hours: 6752 h ⬆️ Mast: Duplex 📏 Lift Height: 4550 mm ↔️ Side Shift: 1250 mm 🔩 Fork Length: 1100 mm 🏠 Cab: Full cab with heating ⚖️ Service Weight: 7200 kg ⬆️ Full Free Lift: 2250 mm ### 📐 Dimensions 📏 Overall Height: 2600 mm 📏 Overall Length: 2450 mm 📏 Overall Width: 2250 mm 📏 Collapsed Mast Height: 3150 mm ### 🛞 Tires 🔹 Front: 23 x 10 - 12 🔹 Rear: 355 x 65 - 15 🆕 Tire Condition: 100 percent new --- # 🛠️ EQUIPMENT ↔️ Side shift 🏠 Full cab ⬆️ Full free lift 💡 Working lights --- # 🏭 IDEAL FOR 🌲 Timber industry 🏗️ Steel mills and steel service centers 🏭 Steel fabrication companies 📦 Handling pipes, profiles, and long materials 🏢 Indoor and outdoor operations --- # 🤝 WHY CHOOSE FT LOGISTICS When you buy from FT LOGISTICS, you are working with a company specializing exclusively in forklifts, sideloaders, multidirectional forklifts, and warehouse equipment. 🔧 Every machine undergoes a complete technical inspection, servicing, and operational testing before delivery. 🌍 We have more than 100 machines available from stock and deliver equipment throughout Europe, South America, Africa, Asia, and the Middle East. ## ✔️ WE PROVIDE 🔧 Full pre-delivery service 🛡️ Warranty 👨‍🔧 Professional technical support 💶 Leasing and financing 🚚 Transport organization 📑 Export services and customs documentation 🤝 After-sales support 💬 Hundreds of customers across Europe trust our machines and continue to return for future purchases. 🎥 We can arrange a live online machine demonstration, provide additional photos and videos, and prepare a tailored transport quotation for your company. # FT LOGISTICS ## 🚀 We Deliver Machines Ready To Work.

Condition: used, Year of construction: 2000, operating hours: 3,00,000 h, functionality: fully functional, overall weight: 18,000 kg, power: 220 kW (299.12 HP), input voltage: 400 V, fuel type: electric, color: red, number of blades: 5, Rollers with 7/7 discs, each with 5 knives Crushing bar with comb new hydraulic hoses reconditioned hydraulic system reconditioned control panel sturdy hooklift frame discharge conveyor belt: 1,400 mm wide discharge height 3,400 mm remote control Gedpfjzh H Uusx Apwoka

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, clamping force: 6,500 kN, screw diameter: 105 mm, total width: 2,300 mm, total height: 2,700 mm, overall weight: 20,000 kg, product length (max.): 8,000 mm, This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. • Maximum injection volume: 4160 cm³ • Minimum mold height: 450 mm • Maximum mold height: 950 mm • Platen opening stroke: 1400 mm • Platen dimensions (W × L): 1510 × 1440 mm • Tie-bar distance: 1100 × 960 mm • Motor power: 161 kW • Heater power: 73.9 kW • Number of electrical connection pins: 32 • Injection nozzle radius (at tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 • Year of manufacture: 2013 • Operating hours: approx. 60,244 h • Condition: Excellent • Status: In production Additional equipment Gsdpox Nr R Hjfx Apwoka • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, machine/vehicle number: REFLEX 36290, This is a fully functional machine that will be ready for delivery in December 2025. It includes a loading table - it has dimensions of 6000 * 2500 mm. The length of the chamber is 6000 mm. The expected status as of December 31, 2025 will be approximately 8,800 hours. The machine is located at: U Panelárny 461, Předměřice nad Labem. Gkodpewhnbfsfx Apwja

Condition: used, mileage: 63 km, power: 81 kW (110.13 HP), first registration: 01/2026, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 4543.CHO24.PU66035 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT - Airbag (passenger side) - Package: Technology Package 5, exterior mirrors with blinker, electrically adjustable, heated and foldable, audio system, 13-inch multifunctional display, Ford SYNC 4 incl. navigation, blind spot assist incl. CTA, rear parking brake assist, Pre-Collision Assist, camera- and radar-based, driver alertness monitor, wrong-way driver warning, lane keeping assist incl. lane departure warning and lane change assist, traffic sign recognition, park pilot front/rear, cruise control, adaptive, intelligent speed limiter, rear view camera, steering wheel, Sensico in leather look, electric safety and ESP - Radio: Ford audio system with 13-inch multifunctional display and Ford SYNC 4 incl. navigation - digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - 13-inch TFT multifunctional display - integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa built-in voice assistant Godpfx Apotr Srlsweka FURTHER EQUIPMENT - 2-stage unlocking for passenger compartment - 6-speed transmission - ABS electronic with EBD - Airbag, driver side - Exterior mirrors, electrically adjustable - Exterior mirror housing, plastic, black - Battery: H7 AGM single battery - On-board computer - Roof, flat - Roof console - Double-wing rear door/180° (without window) - Rev counter - Third brake light - Electronic safety and stability - Window lifter, electric, front - Parking brake, electronic - FordPass Connect - Windshield, heated - Floor mats: rubber floor mats, front - Grab handle, driver and passenger side - Glove compartment with lockable lid - Interior lighting, front - Automatic climate control, front - Headrests (3) - Fuel tank 55 l - Load compartment lighting (LED) - Steering wheel: steering wheel, plastic - Center console, small - Emergency assist - Package: Technology Package 2 (Trend) - Ford audio system with 13-inch multifunctional display and Ford SYNC 4 - Pre-Collision Assist, camera-based - driver alertness monitor - traffic sign recognition system - wrong-way driver warning - lane keeping assist incl. lane departure warning - park pilot system front and rear - cruise control - intelligent speed limiter with speed limit display - rear view camera - Particle filter: diesel particulate filter - Radio accessories: 4 loudspeakers - Wheel covers - Tire repair kit - Tire pressure monitoring system - Wheels: steel 6.5 J x 16 m. 215/65 R16 R - Windscreen wipers with rain sensor - Headlamps with LED low beam - Sliding door: sliding door, right - Mud flaps, rear - Mud flaps, front - Power steering - Seat belts - Seats: seat package 6A - Start-stop system - Start function Ford Power - Bumper, front and rear, partially in vehicle color - Partition (metal) without window - Door handles, plastic, black-grey - Door hinges, 90 degrees - Recirculation heating - Lashing eyes 6 - Immobilizer - Heat protection glazing, slightly tinted - Central locking with remote control ... and more ---- 1st hand. German version. Errors and prior sale excepted. 2 years factory warranty from registration (extendable on request). We will gladly accept your vehicle in part exchange. Financing/leasing possible even without a down payment! Do you have any further questions? We would be happy to advise you! Although despite existing controls, a deviation of the vehicle from the above description cannot be ruled ou

Condition: used, Year of construction: 2008, power: 90 kW (122.37 HP), Hacker Rudnick&Enners RE-TH 250/650/5 250 mm height 650 mm width Power 90 kW Cassel metal separator Approx. 40 linear meters of vibrating troughs Gksdpfozt Hrdex Apwsa

Condition: excellent (used), DCN JetCook vessel500 litre 650 litres, direct from closed Babyfoods facility. Gkedpfx Aoy I Di Sspwja

Condition: ready for operation (used), Year of construction: 2025, operating hours: 58 h, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640 HSCI, total height: 2,900 mm, total width: 2,650 mm, table width: 398 mm, table length: 398 mm, table load: 300 kg, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 40, tool weight: 8,000 g, positioning accuracy: 0.005 mm, product length (max.): 2,900 mm, number of axes: 5, This 5-axis KUNZMANN WF 650 5AX was manufactured in 2025. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 40 tools. The machine has an impressive X-axis travel of 650 mm, Y-axis travel of 500 mm, and Z-axis travel of 450 mm. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 650 5AX vertical machining centre we have for sale. Contact us for further details. • Control Unit Brand: HEIDENHAIN • Control Unit Model: TNC 640 HSCI • A-Axis Travel: +105° / -120° • C-Axis Travel: ±360° • Table Diameter: 398 mm • Maximum Spindle Speed: 12000 rpm • Tool Magazine Capacity: 40 tools • Rapid Feed X/Y: 25 m/min • Rapid Feed Z: 20 m/min • A-Axis Max. Speed: 25 rpm • C-Axis Max. Speed: 25 rpm • A-Axis Positioning Accuracy: ±5 arcsec • C-Axis Positioning Accuracy: ±5 arcsec • A-Axis Torque: 700 Nm Gjdpfxszphg Ie Apwjka • C-Axis Torque: 450 Nm • Control: HEIDENHAIN Conversational / DIN-ISO Programming • Machine Configuration: CNC Swivel Rotary Table (A/C Axis) • Spindle Cooling: Liquid Cooled Motor Spindle • Operating Hours (Program Run): 58 h Accessories: • 19" Touchscreen • HEIDENHAIN HR 510 FS Electronic Handwheel • Automatic Tool Changer • External Coolant System • Internal Coolant Through Spindle (Optional) • HEIDENHAIN TS460 Probe Preparation • TT460 Tool Measurement Preparation • SE661 Probe Receiver Extra Information • Showroom Machine • 12-Month Warranty • Retrofitting and Commissioning Available on Request (Additional Cost) Technical Specification Taper Size SK 40 Through-spindle Coolant No

Condition: used, mileage: 99,045 km, power: 62 kW (84.30 HP), first registration: 11/2010, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,500 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2010, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The used Volkswagen T5 Transporter, year of manufacture 2010, offers flexibility and performance for commercial use. This vehicle is powered by a 2.0 TDI diesel engine delivering 62 kW (84 hp) and complies with the Euro 5 emissions standard. It is equipped with a manual transmission and provides economical operation with an average combined fuel consumption of 7.2 l/100 km. This van was primarily operated by one previous owner and has a mileage of approximately 99,045 km. With its robust construction and truck registration, the T5 is ideal for transporting goods—especially thanks to its two sliding doors on both sides. The cargo area is fitted with a sturdy wooden floor, offering additional flexibility during loading. Presented in Ginstergelb (broom yellow), the T5 is also equipped with parking sensors (Parktronic) to facilitate maneuvering. The main inspection (TÜV) is valid until December 2024, and the vehicle is immediately available for use by both large and small businesses or for export. Nationwide delivery within Germany is available for an additional fee. Gkjdpjy Nyknofx Apwja Sale only to commercial customers (agricultural businesses, freelancers, small and large enterprises) or for export. Subject to prior sale and errors.

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Godpfx Aozty U Sjpwoka Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: excellent (used), functionality: fully functional, mileage: 3,035 km, overall weight: 6,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, operation weight: 6,500 kg, maximum load weight: 3,650 kg, empty load weight: 2,850 kg, fuel: diesel, wheelbase: 3,100 mm, driver cabin: day cab, gearing type: mechanical, suspension: parabolic leaf (spring), Year of construction: 2018, operating hours: 3,035 h, Equipment: ABS, additional headlights, all wheel drive, differential lock, electronic stability program (ESP), hydraulics, immobilizer system, low noise, parking heater, soot filter, traction control, Our authorized SUBARU dealership has a recently imported AEBI MT 740 4X4 utility vehicle for sale, suitable for winter maintenance tasks such as snow removal and salt spreading. Originally configured as a hooklift truck, it has low mileage with approximately 3,000 operating hours. We purchased it from another municipal company that used it infrequently. Of course, the vehicle has been regularly serviced, inspected by us, and prepared for further use. It is equipped with a BEILHACK PKV 172 BG snowplow, and we also have a BUCHER KA2000/C salt spreader. The AEBI MT 740-S is a compact, multifunctional carrier for tools and utility attachments with 4x4 drive. The "S" denotes the Semi-Hydrostat version, which combines infinitely variable work speed with a conventional mechanical drive for fast road travel. The price includes a complete set of registration documents. If a Udt inspection is required, we can also carry it out for a fee and promptly. We offer various payment options: Leasing, credit, cash, and bank transfer. With cash payment or bank transfer, you can drive the vehicle away from the dealership immediately. Additionally, we offer insurance services – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid-for cars and trucks to your specified address throughout Europe. For more information about our services, please contact our sales representatives. DIMENSIONS AND WEIGHTS: GVWR: 6500 kg Unladen weight: 2850 kg Payload: 3650 kg Wheelbase: 3100 mm Hitch capacity: 3500 kg Number of seats in the vehicle registration certificate: 3 External dimensions: Length: 540 cm Width: 174 cm Height: 250 cm Equipment: Radio 4x4 drive Electric mirrors Key Additional lights / fog lights Winter tires ABS BEILHACK snowplow Sand or salt spreading system - BUCHER KA2000/c Technical data: Manufacturer / type: VM Motori R754EU6c Type: Turbo diesel, Common Rail Number of cylinders: 4, inline Displacement: 2,970 cm³ Power: 80 kW / 109 HP Maximum power speed: approx. 3,000 rpm Maximum torque: 420 Nm at 1,100 rpm Torque increase: approx. 40% Cooling: Liquid-cooled Turbocharging: Turbocharger + intercooler Emission standard: Euro 6c Exhaust gas purification: Diesel particulate filter (DPF) + SCR AdBlue: Yes Basic manual transmission, 6 gears + reverse Dual-range reduction gearbox Total number of gears: 12 forward / 2 reverse Clutch: Dry, single-plate, hydraulically controlled Basic drive: Rear-wheel drive Front-wheel drive: Switchable Permanent 4x4 drive: Optional Differential lock: Optional, front and rear Homologated speed: 40 km/h or 89–90 km/h First working hydraulic circuit: 30 l/min, max. 200 bar Version for continuous operation up to 250 bar Second circuit: 30 l/min, 200 bar Gjdpszqt Sfsfx Apwjka High-performance hydraulics: 50 l/min, max. 180 bar Third circuit: Proportional joystick control Additional connections: Optionally at the front and rear Fuel tank: 90 liters AdBlue tank: 14 liters Alternator: Standard 105 A The stated price is net and applies to exports and businesses. A significant discount is available for individual customers – Please contact us directly by phone to get your best price.

Condition: good (used), Code: 0345 Brand: STROMAB Model: KGS 650 - CE Standard Automatic knife grinding machine for planer knives, knife blades and straight tools – CE Standard Technical data: Max working length 650 mm Gedjyxf Ttjpfx Apwska Grinding motor power 0,75 Hp External diameter of the grinding wheel 127 mm Grinding wheel feed per stroke 0,01/0,05 mm Carriage feed motor power 0,15 Hp Carriage feed speed 12,5 mt/min Tilting grinding wheel motor unit Base with tool storage shelves Overall dimensions mm 1200 x 500 x 1300 h Weight kg 103

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening width: 1,800 mm Screw diameter: 90 mm Gjdszncmaopfx Apwoka Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of pump motor: 55 kW Heating capacity: 62 kW DIMENSIONS & WEIGHT Dimensions at installation site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight: approx. 33,000 kg

Condition: good (used), Year of construction: 2011, Vertical machining center Machine type: Avia VMC 650 Control: Heidenhain iTNC 530 Year: 2011 SPECIFICATIONS Travel X-Axis: 650 mm Y-Axis: 540 mm Z-Axis: 620 mm Rapid motion: (X/Y/Z): 25 m/min. Max. revolution: 10.000 rpm Tool: ISO 40 Tool capacity: 24 Gsdpfx Apjzi Dz Usweka Table size: 800 x 540 mm Max. workpiece weight: 700 kg Equipment Chip conveyor Electronical handwheel Internal cooling: bar Caliper: Renishaw

Year of construction: 2015, condition: excellent (used), Very well-maintained Kek Kemutech Gardner K650 C. Includes platform, valve housing, and magnet. 1 unit available. Gedpfxeyy N U Rj Apweka

Condition: new, Year of construction: 2026, CORMAK PS-650 welding positioner is a professional device designed for precise rotation and positioning of welded components in various industrial processes. Thanks to its high load capacity, robust construction, and smooth adjustment of operating parameters, this positioner is an indispensable support tool in facilities involved in welding, assembly, and painting of metal structures. Main advantages of the machine Load capacity of up to 650 kg in horizontal position and 300 kg in vertical position allows handling heavy structural components. Smooth rotation speed adjustment from 0.2 to 1.8 rpm enables precise adaptation to specific welding processes. Table tilting range from 0° to 90° allows welding in the most optimal working position. Compact and stable construction with a robust body ensures safe operation even under high loads. Possibility of mounting a self-centering three-jaw chuck significantly facilitates the clamping of cylindrical components. Design and technology The CORMAK PS-650 welding positioner has been designed with a focus on durability and reliability. The construction includes a brass grounding sleeve, which allows the welding current connection to be transferred directly to the workpiece, ensuring maximum process efficiency. The drive system equipped with a 1.5 kW motor enables smooth and stable rotation of heavy components. The device is equipped with a foot control pedal and a wired hand controller, improving operator comfort and control. Precision and work efficiency The ability to set the table inclination at any angle within a range of up to 90°, combined with precise rotation speed adjustment, allows perfect positioning of the workpiece for a specific task. Rotation in both directions significantly speeds up the welding process and improves the quality of joints, ensuring repeatability and an aesthetic finish of welds. Applications The CORMAK PS-650 welding positioner is widely used in: steel construction plants, production and repair workshops, industries such as mechanical engineering, railway, and shipbuilding, painting facilities and assembly departments. Thanks to the ability to rotate and position components at the most convenient angle, it greatly improves operator efficiency and reduces production times. Standard equipment CORMAK PS-650 welding positioner Foot control pedal Wired hand controller Power cable Operating manual Optional equipment Self-centering three-jaw chuck for pipes WP500 Self-centering three-jaw chuck for pipes WP600 Technical specifications Parameter Value Horizontal load capacity 650 kg Vertical load capacity 300 kg Table diameter 650 mm Centering hole size 80 mm Gedpeuc Tdqefx Apwjka Table tilting range 0° ~ +90° Rotation speed range 0.2–1.8 rpm Speed adjustment Smooth Overall length 850 mm Overall width 700 mm Overall height 680 mm Gross weight 230 kg Power 1.5 kW Power supply 400 V CORMAK welding positioners are proven and reliable solutions for professional industrial facilities. Increase precision, reduce production time, and improve welding quality with the PS-650 model.

Condition: new, Year of construction: 2026, functionality: fully functional, Set including LUFT 700 screw compressor, N10S refrigeration air dryer. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Godpfx Apsrh E Diowoka Overall dimensions 1250 x 600 x 895 mm Weight 380 kg Manufacturer: Cormak

Condition: good (used), Year of construction: 2002, functionality: fully functional, Bone saw Berkel / Mado MKB 650 16A. 380V. Workshop-tested, defects corrected. Gkjdpjy Du T Tsfx Apwea Motor brake. Saw blade new. Year of manufacture: 2002 Inspection and test run possible by prior phone arrangement! Cash or advance payment! Sale only to commercial customers, no warranty, no guarantee.

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Gjdpfxszrwgcj Apwska Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, used Cleaned, functionality tested, test run performed, partially refurbished 16 A cable installed Belt renewed Runout measured New wooden jaws attached Manufacturer: Bäuerle Type: SFM Motor: 4, 5.5 hp Motor: 2 speeds/pole-switchable 6 speed levels: 2800 / 4500 / 6000 / 5600 / 9000 / 12000 Foot brake Right-left rotation Spindle diameter: 30 + 40 mm Table size: 1100 x 900 mm Wooden stop jaws: new Belt: new Milling stop with fine adjustment Space requirement: approx. 1000 x 900 x 1000 mm Weight: approx. 600 kg Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, Gkodpfx Aoy Ay Awepwea without warranty or guarantee.

Condition: used, machine/vehicle number: 008477, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Gjdjy Hq Nvepfx Apweka Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 007834, Type of edging: Thin edge, Thick edge, Solid wood Gkedpfx Apev Sf I Eswsa Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 007985, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Gedpfx Apjx A Th Djwoka Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 005637, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1300 mm Max feed speed: 50 m/min Gsdsvw Ev Hepfx Apwjka Operating Units Right Side: 11 nr Operating Units Left Side: 12 nr