Used Sket / Mill 8 Block for sale (45,179)

Condition: used, maximum load weight: 19,880 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 06/2013, loading space length: 11,700 mm, loading space width: 2,500 mm, loading space height: 2,250 mm, loading space volume: 66 m³, total width: 2,660 mm, total height: 3,760 mm, Year of construction: 2013, Equipment: ABS, * Tridec steering * Lift axle * Mercedes Benz axles * Full air suspension * Disc brakes * Frigoblock cooling unit * 2,000 kg Dautel tail lift Psdpozcimqofx Abhsgn * Tyres 385/65 R 22.5 60-80 %

Condition: used, mileage: 5,99,000 km, power: 290 kW (394.29 HP), first registration: 05/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2027, color: silver, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, * Medium-length cab * Reversing camera * Constant throttle * Navigation system * Adaptive cruise control * Attention Assist * Active Brake Assist * Lane Keeping Assist * Automatic transmission * Fully air-suspended * Differential lock * Air conditioning * Heated seats * Euro 6 Combined with 2-axle refrigerated semi-trailer: * Manufacturer: Rohr * Cargo area dimensions: 13,600 x 2,500 x 2,150 mm * Payload: 21,860 kg * First registration: 05/2017 * Frigoblock refrigeration unit HK 25-2 * 2,000 kg Bär tail lift * Trideck steering * Aluminum floor * Reversing camera * Mercedes Benz axles * Disc brakes * Air suspension ----Special equipment: Front axle load 8.0 t, driver's airbag, work lights, Bluetooth comfort audio navigation system, exhaust outlet down right, passenger side exterior mirror with maneuvering position, battery 220 Ah, bi-xenon headlights, compressed air connection in cab, aluminum air tank, air horn, driver assistance system: Attention Assist (fatigue detection sensor), tinted windscreen with band filter, alternator 150 A, 12.7 cm info display with additional readout, integral rear, mounting plate / saddle plate 40 mm for fifth wheel coupling, front engine PTO prepared for Frigoblock, reinforced engine brake, parameterizable special module, acoustic reverse warning (external warning signal), low-maintenance fifth wheel coupling, circuit breaker, cab seats: comfort driver's air suspension seat, sunblind for side window, driver's door, 24V / 12V 10A inverter, additional 24V socket in passenger footwell, CB radio preparation, preparation for cool box / refrigerator, additional thermal insulation, auxiliary heater (water) Further equipment: Emissions standard EURO 6, axle configuration: 4x2, 24V / 15-pin trailer socket, Antos, electrically adjustable and heated exterior mirrors, rear axle differential lock, medium compressed air unit, driver assistance system: Active Brake Assist, driver assistance system: Lane Keeping Assist, cab width: 2.30 m, cab: hydraulic tilting mechanism, cab: M ClassicSpace, cab: steel-sprung, standard, cab: reinforced (Sweden), cab floor with engine tunnel 320 mm, suspension: leaf / air, front spring support aluminum, front springs 7.5 t, 2-leaf, electric window lifters, 12-speed gearbox - Type: G 211-12, urea tank (AdBlue): 60 l, manual steel sunroof, rear axle crown wheel 440, body/chassis: tractor unit, central locking system, 3-piece mudguard, 390 l aluminum fuel tank, unregulated power steering pump, front air intake, engine 10.7 l - 290 kW R6 Diesel (OM 470), engine compartment encapsulation, wheelbase 3,700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axles, seat cover/upholstery: fabric, cab seats: co-driver function seat, front splash guard, front axle stabilizer, 24V socket in cab, tachograph / EC recording device, aerodynamically shaped underride guard, underrun protection front, toll recording preparation, cranked front axle, regulated water pump, permissible gross weight 18.00 t Pedpfey Nglxsx Abhsgn

Condition: used, maximum load weight: 11,540 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2013, Equipment: ABS, tail-lift, We are very pleased that our offer has attracted your interest and can already assure you that you will be able to purchase a well-maintained, affordable vehicle with a verifiable service history from us! GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration, export documents / EUR 1 certificate, and manufacturer's declaration for export. FINANCING Podpfjyw D Sxjx Abhjgn Upon request, we will be happy to provide you with a leasing, hire purchase, or financing offer. SERVICE TÜV general inspection / UVV tail lift inspection / LGS inspection / tachograph calibration / installation of onboard unit (OBU) and service by our authorized workshop in advance. TOLL / ROAD CHARGES Toll registration can be completed on site. TRAVEL / DISTANCES Wittlich train station: 500 m away Frankfurt Airport: 150 km away Frankfurt-Hahn Airport: 40 km away Luxembourg Airport: 75 km away Sale according to our General Terms and Conditions. The information provided online is non-binding and serves as a general description. It does not constitute guaranteed characteristics. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2013, next inspection (TÜV): 01/2023, loading space length: 7,580 mm, loading space width: 2,500 mm, loading space height: 2,250 mm, total width: 2,600 mm, total height: 3,650 mm, * EuroScan * Frigoblock EK13 U refrigeration unit * Electric roll-up door at the front * Tail lift * Air suspension * Hydraulic supports ----Internal vehicle number: 7701----Errors and prior sale excepted. WhatsApp support available! Pgsdpelltvujfx Abhjn If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: excellent (used), Year of construction: 2021, operating hours: 11,514 h, functionality: fully functional, machine/vehicle number: 20210202, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 640, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 820 mm Travel Z-axis: 600 mm Spindle speed (min.): 18,000 rpm Spindle operating hours: 11,514 h Coolant supply: 40 bar MACHINE DETAILS Apparent power rating: 90 kVA Control manufacturer: Heidenhain Control model: TNC 640 Total weight: 20,000 kg Input voltage: 400 V Full load current: 125 A Max. current load: 200 A Short-circuit resistance: 25 kA Voltage: 400.50 V/Hz Pgodpfx Abszb A Ekohen Net weight: 20,000 kg Machine number: 20210202 EQUIPMENT Documentation/Manual Chip conveyor

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Spindle speed range: 0 – 8,000 rpm, stepless (SK 50) Including the following accessories: - NC rotary table, 900 mm x 700 mm clamping surface (maximum table load 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine stations, double gripper (SK 50) - Fully enclosed guard cabin with sliding doors and interior lighting - ICS – 40 bar (internal coolant supply) - Chip conveyor Pgodpfxjxn Aczs Abhen - Rotoclear - 3D tactile probe Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - 50 pcs. tool holders SK 50 - 3 height-adjustable machine feet - Transport device - Operating manuals

Condition: used, mileage: 3,06,789 km, power: 220 kW (299.12 HP), first registration: 06/2020, fuel type: diesel, maximum load weight: 7,700 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,200 mm, color: other, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: air, loading space volume: 45 m³, loading space length: 7,520 mm, loading space width: 2,520 mm, loading space height: 2,350 mm, Year of construction: 2020, Equipment: air conditioning, cruise control, navigation system, onboard computer, tail-lift, trailer coupling, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is specified, it will be converted using the current daily exchange rate. The currency of the vehicle's location is valid. Engine: OM936, inline-6, 7.7 l, 220 kW (299 hp), 1200 Nm, Predictive Powertrain Control, air suspension, rear axle, parking brake, electronic, trailer brake, fuel tank 290 l aluminum, trailer coupling, S-cab, S-cab, cab width 2.30 m, locking system with central locking, comfort locking system, air conditioning, rain sensor, lane keeping assist, attention assist, traffic sign assist, cruise control, navigation system, cooling: Frigoblock FK 25i LBW Palfinger, 2000 kg, 2300 sheets, odometer V. 4042. 2, dated 01.01.2020. Pgodpsy Unrdefx Abhen

Condition: used, Veeco Dektak 8 Pgedpfxjwr A Sme Abhon Working condition and calibrated

Condition: used, mileage: 5,71,543 km, power: 235 kW (319.51 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 9,850 kg, maximum load weight: 8,150 kg, overall weight: 18,000 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space volume: 46 m³, loading space length: 8,300 mm, loading space width: 2,500 mm, loading space height: 2,260 mm, Equipment: ABS, air conditioning, cooling unit, cruise control, differential lock, electronic stability program (ESP), navigation system, onboard computer, sliding door, soot filter, tail-lift, MAN TGM 18.320 with Frigoblock refrigeration - Deep-freeze box body Pgedszbb E Njpfx Abhon - Dimensions (LxWxH internal): 8.30 x 2.48 x 2.26 m - Refrigeration unit: Frigoblock FK 25L - Tail lift - Tail lift door - Partition wall - Automatic transmission - Full air suspension - Engine brake - Cruise control - Air conditioning - EURO 6 - Tyres: 315/70/22.5 German vehicle. Good condition! Languages: - We speak English - On parle français - ?? ????? ?? ???? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano Errors and prior sale excepted. All details without guarantee. Yourtrucks Group The Yourtrucks Group maintains business relations worldwide. Both purchasing and sales are conducted across national borders; therefore, our listings generally show the export price, as this is independent of the place of use. Yourtrucks GmbH compiles the content of this website with the greatest care and ensures that it is regularly updated. This information is to be regarded as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to change, errors, typographical errors, and prior sale. Only our general terms and conditions apply. Languages - We speak English - On parle français - ?? ????? ?? ???? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Pjdpfxsyb Nc Ns Abhjgn Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Condition: new, Year of construction: 2026, CNC Machining Centers MILL 530 – Reliability and Precision Combined CNC machining centers MILL 530 are industrial machines that combine reliability and precision in a single solution. Thanks to their robust construction and proven components, these machines are ideal for demanding industrial applications. The massive machine frame ensures stability and machining accuracy, while the fully enclosed working chamber keeps the workspace clean and safe. The hardened worktable surface is gentle on machined parts, and the efficient cooling system provides optimal cutting conditions. Choose the MILL 530 to ensure the highest quality and efficiency in your production. MILL 530 Machining Center – Precision and Efficiency in CNC Machining The MILL 530 machining center is an advanced vertical CNC machining center designed for precise metal machining in manufacturing plants. Equipped with modern technologies and a solid construction, it ensures reliability and high performance in a wide range of industrial applications. Technical Specifications Travel Range X-axis: 450 mm Y-axis: 340 mm Z-axis: 400 mm Distance from spindle nose to worktable: 10–470 mm Distance from spindle center to column guideway: 350 mm Feed Rates Rapid traverse X-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Y-axis | power | torque: 14 m/min | 1 kW | 4.78 Nm Rapid traverse Z-axis | power | torque: 11 m/min | 1.75 kW | 8.36 Nm Worktable Table size: 900 × 400 mm T-slots: 4 × 14 mm Spindle Spindle speed: 100–8,000 rpm (optional 10,000 rpm) Spindle taper: BT40 Coolant pump: 480 W; 2.5–3.3 m³/h Main motor power: 3.7 kW Tool Magazine Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool change time: 2–5 s Other Parameters Positioning accuracy: 0.01 mm Pgjdpfeyb D Dbox Abhon Dimensions (L × W × H): 2100 × 2250 × 2600 mm Weight: 1800 kg Standard Equipment SIEMENS SINUMERIK 808 Advanced control system 8,000 rpm spindle 16-tool magazine Three-color alarm lights Work lighting Closed coolant system Fully enclosed machine housing Automatic lubrication system Pneumatic system Siemens Sinumerik 808D – Compact CNC Control for Basic Applications The Siemens Sinumerik 808D is an economical CNC control designed for entry-level lathes and milling machines, ideal for small and medium-sized workshops. Its key features include: Intuitive operation: Graphical interface and Teach-In function simplify programming and significantly reduce operator training time. High reliability: Robust design resistant to dust and moisture, ensuring stable operation in workshop environments. Compatibility: Designed for machines with standard requirements, with easy integration of SIEMENS servo drives. Cost optimization: Low energy consumption and minimal service requirements, making it ideal for beginner CNC users.

Year of construction: 1977, condition: used, strip width: max. 800 mm coil weight: 12 t Pgodsbh Sz Sspfx Abhjn mandrel Ø: 450 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,206 h, functionality: fully functional, machine/vehicle number: 20170708, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 530, spindle speed (max.): 18,000 rpm, The machine underwent maintenance in April 2025, during which the rotary union was replaced at a cost of €8,600! TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 830 mm Travel Z-axis: 600 mm Swivel range A-/C-axis: approx. -100 to +120° / -120 to +120° C-axis rotation range: 360° Table diameter: 800 mm T-slots (number x width): 9 x 90 mm Maximum table load: 1,200 kg Kessler spindle: 18,000 rpm Maximum tool length: 300 mm Maximum tool diameter: 75 mm Maximum tool diameter (with adjacent stations empty): 125 mm Maximum tool weight: 7 kg Tool change time: 3 s Rapid traverse X/Y/Z: 60 m/min Max. A-axis speed: 50 rpm Max. C-axis speed: 100 rpm Acceleration X/Y/Z: 7 m/s² Repeatability: 0.004 mm Positioning accuracy: 0.008 mm Rotational drive system: Integrated direct drives Tool holder: HSK 63 Tool stations: 96 MACHINE DETAILS Control: Heidenhain 530 Psdpfx Aoy I Tvnjbhsgn Dimensions & Weight Weight: 19,000 kg Layout with accessories (L x W x H): 4,150 x 5,000 x 3,500 mm Tank capacity: max. 330 l Total coolant capacity: max. 425 l Operating Hours Control on-time: 20,248 h Machine on-time: 19,424 h Program run: 11,331 h Spindle hours: 11,206 h EQUIPMENT Spindle chiller Kessler swing, 800 mm turning diameter, fully utilizable with zero-point clamping system Note: The touch probe is not included in the offer. The holders, however, are part of the offer.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, PSG Hotrunner Controller Pgodpfxeza H Els Abhsn 8 fases In very good condition Included 24-pin Cable

Condition: new, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMC 80 FD duoBlock Year of manufacture: NEW Control system: Celos with Heidenhain TNC 640 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 1050 mm Pgjdpfsy U Hlpex Abhen Z-axis: 850 mm Main spindle: Tool interface: HSK-A 100 Speed range: 12,000 rpm Drive power (100/40%): 52 / 42 kW Max. torque: 430 / 300 Nm Rotary table: Table diameter: 800 x 630 mm Max. table speed: 30 rpm (milling) / 800 rpm (turning) Tool changer: Number of tool positions: 123 Technical features & accessories: - Universal milling head with controlled B-axis - NC milling/turning table with pallet carrier - Rotating pallet changer, 2 pallets - Coolant tank 980 l - Oil and emulsion mist separator system - Chip conveyor - Rotating viewing window - Taper cleaning station with rotating brushes for HSK tool holders - Control panel for the tool magazine of the loading station with a 15-inch TFT screen - Internal coolant system (IKZ), frequency-controlled 10 bar – 80 bar / 31 l/min through the spindle center (AD) - Flushing gun for chip flushing - Cooling device with compressed air through the spindle center - Optical infrared probe Renishaw PP60 (OMP 60) - Tool measurement in the work area Blum Laser DIGILOG - Tool breakage monitoring, mechanical version - 3D quickSET - Sensor package i4.0, consisting of: MPC – Machine Protection Control, SGS spindle growth sensor, IKZ flow monitor - Condition Analyzer - proTIME - 4-color signal light - Operating mode 4 - Accuracy package - Electronic handwheel - Energy meter for CELOS - Safety package for power failure - L-probe package 2 (Renishaw) / L-measurement Accessories, illustrated tools and clamping devices are only included in the scope of supply if this is stated in the additional information. Subject to change and errors in technical data and specifications, as well as prior sale!

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-20 concrete block machine is a fully automatic block production facility equipped with modern production technologies and a hydraulic system. Thanks to its PLC-controlled structure, it produces with high precision without the need for operator intervention. Operating at a pressure of 100-160 bar, the system has the capacity to produce 20 interlocks and 8 20x40x20 blocks per press. Furthermore, it minimizes labor requirements thanks to a collection robot that automatically stacks and packages dried products. The BS-20 offers an environmentally friendly production approach with its A+ energy-efficient motor system, EFF3 class electric motors, and low energy consumption. It meets European quality standards with its ISO 9001:2008 quality management system, CE certificate, and DIN-TSEK compliant structure. It provides a user-friendly experience with its automatic/manual switching system that increases operational flexibility, remote fault detection via the internet, and forklift-compatible design. BS-20 Concrete Block Machine Technical Specifications Psdpexpi Tiefx Abhegn Production Capacity: 100–110 pallets per hour Pallet Size: 1,000 x 920 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.2 m³ Hydraulic Oil Capacity: 400 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Product Height (max): 3,000 mm Product Length (max): 600 mm Machine Chassis: 10 mm Production in 8 Hours: 8,000 blocks / 18,000 interlocks Why Should You Choose the Constmach BS-20 Concrete Block Making Machine? The BS-20 Concrete Block Machine offers high efficiency, low operating costs, and long-lasting use for medium-sized businesses. Manufactured with the assurance of CONSTMACH engineering, this system delivers uninterrupted production performance thanks to its automation capabilities and robust construction. With spare parts warranty, fast service network, and 24/7 technical support, CONSTMACH ensures your investment operates reliably for many years. Therefore, by choosing the BS-20 model, you can maximize both your production quality and operational efficiency. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-25 concrete block making machine is an excellent solution for plants producing concrete blocks, bricks, paving stones, and bims, offering high efficiency and flexible production capabilities. Developed in line with modern production concepts, this machine can easily produce various products such as paving stones, curb stones, and hollow blocks using different molds thanks to its single-layer structure. Thanks to its scalable facility structure, investors can quickly and economically increase their production capacity according to their needs. The BS-25's fully automatic PLC control system allows a single operator to manage the entire production process. The touchscreen LCD control panel offers the ability to monitor and print production data in real time with its user-friendly interface and advanced reporting system. With its remote access feature, the system can be controlled via LAN or internet connection, allowing for easy detection of potential malfunctions and remote software updates. This smart automation technology ensures consistent quality and maximum production in every shift. BS-25 - Concrete Block Machine Technical Specifications Production Capacity: 110–120 pallets/hour Pallet Size: 1,200 x 980 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.5 m³ Hydraulic Oil Capacity: 500 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Pgsdpsxpi T Aofx Abhen Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Production Capacity in 8 Hours: 10,000 concrete blocks / 25,000 interlock blocks Why Should You Choose the BS-25 Concrete Block Machine? CONSTMACH stands out in the production of concrete block, brick, and paving stone making machines with its reliability, engineering quality, and after-sales support. The BS-25 model reduces your production costs while increasing your capacity with its energy-efficient design, long-lasting components, and smart control system. Each machine is delivered after passing quality control tests and can be customized upon request. For investors seeking high durability, minimal maintenance requirements, and world-class production performance, the BS-25 is a symbol of long-term profitability and reliability. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 11,898 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 840 Dsl - ShopMill, overall weight: 5,450 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DMG ecoMill 800 V was manufactured in 2016. It features a robust SK40 spindle with a speed of 12,000 rpm and a 30-station tool magazine. The machine supports a maximum workpiece weight of 800 kg and includes a built-in coolant system with a high-pressure 20 bar filter. Additional features include a swarf conveyor and Renishaw touch probe. If you are looking to get high-quality milling capabilities, consider the DMG ecoMill 800 V machine we have for sale. Contact us for more information. • Tool magazine capacity: 30 stations Podpfox D H Dhox Abhsgn Additional equipment • Coolant system with filter, high-pressure 20 bar • Coolant tank capacity: 600 l • Swarf (chip) conveyor • Renishaw OTS • Renishaw touch probe

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm z-travel 800 mm control SIN840D spindle turning speed - stepless 5 - 10.000 U/min power capacity at 40 % load 38,00 KW power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 kW spindle taper HSK 100 feed X/Y/Z/-axis 0 - 60.000 mm/min rapid traverse X/Y/Z 60,00 m/min feed capacity X/Y/Z 12,00 kN B - axis 180 x 0,001 ° rapid travel B-axis 10,00 U/min size of pallet 800 x 630 mm table load 0,80 t C-axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 800 U/min Pgedpfsx Tiy Tjx Abhsn power capacity - table 13,85 kW max. torque on the faceplate 1.550 Nm toolpiece magazine: chain magazine 60 Stück tool diameter 110 mm wotkpiece diameter with 2 vacant positions 230 mm tool length - max. 450 mm weight of tools max. 30,00 kg total power requirement 80,00 kW weight of the machine ca. 18,00 t dimensions of the machine ca. 7,50 x 5,50 x H3,50 m 5-axis machining center with SIEMENS SIN840D coolant filer system 980l, chip conveyor, coolant through the spindle, extraction, BLUM tool measurement, measuring probe, operating mode 4, tool cone cleaning, hydraulic clamping with proportional valve.

Condition: excellent (used), Grinding pins, various sizes also available individually. Diameter: 8-10-12-13-14.8-15-16-17-18 mm, price per piece: 10 euros Diameter: 20-22-25-28 mm, price per piece: 12 euros Diameter: 30-32-34-35-36-38 mm, price per piece: 15 euros Diameter: 40-42-45-48 mm, price per piece: 20 euros Diameter: 50-52-55 mm, price per piece: 25 euros Diameter: 60-62-65-68 mm, price per piece: 30 euros Diameter 70 mm, price per piece: 40 euros Diameter 80 mm, price per piece: 50 euros Pjdpfx Abok R Tnpshegn We would also be happy to offer you a package price.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,150 kg, load capacity per storage section: 3,050 kg, total length: 45,600 mm, total height: 3,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 8, frame height: 3,500 mm, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 45,600 mm, 8 double-bay pallet racks (M35112711-3) Each 5.7 m long, 3.5 m high, 1.1 m deep Each with 2 bays, 2.7 m wide per bay Each with 3 beam levels, compartment load 3,000 kg - 24 frames (RM3511 - RAL5019) - 48 base plates, leveling and fixing materials - 96 floor anchors (ZZBA1210) - 96 single beams (T2711 - RAL2008) - 8 load capacity signs (BSMcP) Frames bolted, not preassembled Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivery free site / assembly location Pgodpfxsy Sxfvo Abhen - Unloading from the truck is performed by the buyer using their own lifting equipment - Deliveries throughout the territory of the Federal Republic of Germany, except islands! Deliveries to EU countries can be arranged individually.

Condition: used, Year of construction: 2018, total height: 4,000 mm, total length: 5,100 mm, total width: 3,800 mm, overall weight: 20,000 kg, POS POSmill H 800 U – 5-axis machining centerThe machine is designed as a 5-axis machining center and features a swivel axis with a range of -120° to +120°, as well as a rotary table with a continuously rotating 360° C-axis. A separate A-axis is not available. The working area is realized by a high-quality Kessler rotary table with a diameter of 800 mm. The machine is not equipped with a pallet changer.A key highlight is the 96-position tool changer, making the machine ideal for series production as well as complex machining tasks. In combination with the integrated through-spindle coolant system (IKZ) with 50 bar, the machine is well suited for demanding applications in toolmaking and the automotive industry.Operating data:Control ON: approx. 25,280 hMachine ON: approx. 24,730 hProgram run: approx. 9,150 hSpindle hours: approx. 8,555 h Spindle speed: 18000 - rpm Travel Y-axis: 820 - mm Dimensions (LxWxH) approx.: 5100 x 3800 x 4000 mm Pgsdpfxoy An A Eo Abhon Weight approx.: 20,000 kg Control: Heidenhain ITNC 530 Travel Z-axis: 600 - mm Travel X-axis: 670 - mm 5-axis machining: Yes Year of construction: 2,018 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: excellent (used), Year of construction: 2010, DMG DMU 80 monoBLOCK, 5-axis Year of manufacture: 2010 Control: iTNC 530 Technical specifications x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 tool taper SK40 Pjdpfx Aboytfn Sjhogn swivel milling head B-axis: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg NC rotary table, integrated, C-axis: 360 ° number of toolpositions 2x16 pos. tool taper SK40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m Accessories/options: - swarf conveyor - replaced X/Y/Z ball screws and spindle in 2019 - full set of documentations - precision vice - tool holders

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm. Pedpfx Asl Dw Nxobhogn

Condition: good (used), Year of construction: 2013, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, spindle speed (max.): 8,000 rpm, table width: 406 mm, table length: 1,372 mm, rotational speed (max.): 8,000 rpm, overall weight: 3,100 kg, space requirement width: 2,280 mm, space requirement length: 2,900 mm, space requirement height: 2,550 mm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis: 1.000 mm Y-axis: 500 mm Z-axis: 530 mm Table size: 406 x 1.372 mm Spindle nose: BT 40 Spindle speeds: 1 - 8.000 rpm Controller: Fagor Pgodpfxevpl I Te Abhsn Featured with: - Cooling unit - User Manuals Country of origin: Taiwan Motor power: 10 HP Machine LxWxH: 2.900 x 2.280 x 2.550 mm Machine weight: 3.100 kg