Used Snijstaal Hardening Furnace for sale (1,866)

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ Lodpfx Aefz Anpekfohf 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ Lhsdpfjfy T H Iex Akfof 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI year of construction 2001 Maximum temperature: 750°C Lhjdovcyf Tspfx Akfof Year of construction: 2001 Batch size: L X W X 1200 X 600 X 600mm Heating: Electric Heating capacity 100 KW

Year of construction: 1996, condition: used, functionality: fully functional, load capacity: 650 kg, IPSEN DAQ 7-8 Manufacturing Year : 1996 Lodpjxivumsfx Akfehf Heating : Gas Heaters : Recon 2 (x3) Charge Capacity : 650kg Brutto Charge dimensions : W:650mm L:1173mm H:550mm Protective Gasses : Endogas Ammonia Nitrogen The furnace can be operated with existing conditions.

Year of construction: 2005, condition: ready for operation (used), Industrial drying oven / heating oven: Maximum operating temperature: 160°C, power: 20.6kW, double-door model, recirculating air / fresh air system, digital PID temperature controller, digital timer / process control, digital recording device / chart recorder (TE Direct), internal dimensions (W x H x D): approx. 1000mm x 1500mm x 800mm (approx. 1200l volume), external dimensions (W x H x D): approx. 1600mm x 2100mm x 1200mm, total weight: 580kg. Inspection possible by arrangement. Lodpfsylzg Iex Akfshf

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: PP120/40, Hot Wall Pulsed Plasma Nitriding Furnace (tandem with 2 bases) Control system was refurbished in 2018 Furnace Model : Plateg PP120/40 Loading Dimensions Diameter : 1000 mm Height : 1250 mm Max. Load Weight : 1000 kg (gross) Plasma Power : 40 kVA Heaters Power : 3x13,5 kW, (3 zones) Electrical Connection : 400V 3 phase 50 Hz Ledswmfyvjpfx Akfehf

Condition: ready for operation (used), functionality: fully functional, HEAT TREATMENT FACILITY WITH SCADA CONTROL SYSTEM AKF1 İPSEN TQF 4 EM 1977 model Atmosphere controlled Chamber type furnace (1 Piece) • AKF2 İPSEN TQFRA 5 EM 1991 model Atmosphere controlled Chamber type furnace (1 Piece) • AKF3 İPSEN T4 EM 1972 model Atmosphere controlled Chamber type furnace (1 Piece) • AKF4 İPSEN TU-5 EM 1970 model Atmosphere controlled Chamber type furnace (1 Piece) Lhsdpfx Aowgmp Sskfef • HSH 2011 model high temperature stress relief, bright annealing (1 Piece) • İpsen Dac 5 ER 2011 model nitriding, high temperature stress relief (1 Piece) • İpsen DAC 4 1980 model high temperature stress relief, bright annealing (1 Piece) • HSH 2007 model high temperature stress relief, bright annealing (1 Piece) • BOREL 1987 model well stress relieving furnace (1 Piece) • 1972 model Ipsen stress relieving furnace (2 Pieces) • Loading car (1 Piece) • Unloading car (1 Piece)

Condition: used, Year of construction: 2011, Technical details: temperature min.: 1 ° temperature max.: 199 ° electrics - voltage/frequency: 380 / 50 V/Hz heating capacity: 1,8 (1800 Watt) kW protection class: IP 54 total power requirement: 16,2 kW weight of the machine ca.: 0,93 t dimensions L x W x H: 2,85 x 2,0 x 1,4 m Pre-polymerization tunnel - Heat treatment tunnel Application: drying for washing and painting lines - pass through Sold as is and described! Lhodpeu Nw E Ujfx Akfof other features: -recommended temperature according to manufacturer max. 80°C; safety setting 90°C; heating 230V -with chain conveyor/feed line made of Teflon -chain width 200mm -max. workpiece width 150mm passage W: 150 x H: 110mm, running height 600mm; operation motor SEW Eurodrive (gear motor) power 0,18kW loading W x H: 500 x 800mm unloading door W x H: 600 x 1200mm access door W x H: 800 x 980mm with safety locking system room height 1400mm *

Condition: new, Year of construction: 2025, Powder baking furnace 3,500 x 1,900 x 2,000 mm 1 Inner dimension length 3,500 mm Lhedpfefhv Tcex Akfsf 2 Inner dimension width 1,900 mm 3 Inner dimension height 2.000 mm 4 Substructure 1 set of steel profiles 5 Walls 1 set of double-sided galvanized sheets 1mm, outside RAL 6 Insulation walls, ceiling 1 set rock wool 150mm 75Kg/m² 7 Floor furnace receives 2 drive-in rails for trolleys 8 Temperature 220°C 9 Fans 1 pc. 7.500 m³/hour 10 Electric motors 1 pc. 3 kW , 1450 U/m, 3 F, 50 Hz 11 Thermal power 58 kW 12 Hinged doors one-sided 2 pcs. insulated with rock wool 150mm 75Kg/m² Heating indirectly by thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burner 1 pc. furnace is heated electrically 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Year of construction: 1990, condition: used, degree max 1800 total power requirement 5 kW Lodpfx Aergbyvjkfjhf

Condition: new, # suitable for treatment under inert gas # with rapid cooling by fan external dimensions (w x h x d): 1500 x 1600 x 2500 mm useable dimensions (w x h x d): 750 x 600 x 1100 mm Lhsdpfx Aocdi R Eekfsf temperature: 1200°C electrical heated: approx.. 42 kW charge weight: 700 kg

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Ledeqgfbgopfx Akfjhf

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Ledpfoq Ttz Ejx Akfshf

Year of construction: 2010, condition: ready for operation (used), Heated surface: 1600x2600/ 2000x2000mm, nominal power: 120kW, length: 2600mm, width: 2300mm, with control cabinet and conveyor. Lhodpfsifpuaox Akfsf

Year of construction: 1991, condition: ready for operation (used), Working/ nominal temperature: 800/ 850°C, inner dimensions: 1100x500x260mm, heating output: 120kW, connected load: 1.5kW, with documentation, without accessories or spare parts, an inspection is possible. Lhjdpfxopcgzgj Akfjf

Condition: excellent (used), Carbolite CWF 11/5 Chamber Furnace 1100 °C Max Temp: 1100 °C With exhaust system and table Upward opening door keeps hot surface away from user Soft self-closing door (for 5, 13, 21 & 23 liter models) Standard start delay and process timer function Durable aluminum oxide support plates for the heating elements; sturdy door surround and base plate High quality fiber insulation with low thermal mass Powerful heating elements on both sides provide very good temperature homogeneity Easy access to elements and controls simplify maintenance and servicing Lhsdpfxspygpfs Akfsf Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type G.11.01 Glasbeek finish Lsdpfxsd Spxvs Akfjhf Gas chamber furnace Type G.11.01 With loading trolley Maximum temperature 200 ° C BJ. 1991 3 x 380V 54 kW Approximate inside dimensions (B1900mm x T2940mm x H1965mm) Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Lodpjxp Rbhefx Akfohf

Year of construction: 1992, condition: ready for operation (used), Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible. Lhjdpfx Akeyfv N Refjf

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Lsdjvxvgrspfx Akfohf

Year of construction: 2010, condition: ready for operation (used), A single-chamber glass tempering furnace (pre-stressing system) Uniglass for the toughening process of safety glass is available. Heating capacity: 690kW, motor power: 870kW, total power: 1570kW, minimum diagonal dimension: 290mm, glass thickness range: 2.85mm–15mm, max. glass dimensions X/Y: 4800mm/1500mm. The ceramic rollers are in poor condition. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Lodpsw Igvtjfx Akfehf

Condition: ready for operation (used), A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible. Lhedpfx Aswkiipskfof

Condition: ready for operation (used), A profile hardening system (inductor) AEG-Elotherm Elomat V/N/180/3 is available. The nominal output is 200kW. The system is fully functional and is offered including various coils. Lhjdpfottv Trjx Akfof

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Lhsdpfx Aotxb Avjkfsf

Year of construction: 2018, condition: ready for operation (used), A slightly used Uterna furnace is available. Internal dimensions X/Y/Z: 1500mm/1500mm/1000mm, power: 38kW, max. temperature: 500°C. Machine dimensions: approx. 2150mm/2650mm/2200mm. Documentation available. An on-site inspection is possible. Lhodpfoxt Rmlsx Akfsf