Used Surface And Profile Sanding Machine for sale (72,413)

Year of construction: 2005, condition: good (used), machine/vehicle number: 8382, 2-head welding machine for PVC profiles Nsdpfxezdq Tte Alhecu

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm Nodpfx Ajvnv Tqslhjcu - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the Njdpfsv D Rg Dox Alhjcu compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with Nsdpjvu Hgbjfx Alhocu very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission Ncedpfx Aet Tqy Eslhju the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: excellent (used), functionality: fully functional, Comec FXT Double-Sided Milling Machine Number of milling units: 4 Unit arrangement: Right/Left/Top/Top Ncsdpfx Aoyxm R Hslhsu Milling unit power: 4×0.85 kW Spindle speed: 12,000 rpm Feed speed: adjustable via variator

Condition: excellent (used), functionality: fully functional, Bartezaghi 2BE 250 Cross Milling Machine Spindle length: 240 mm Maximum milling height: 250 mm Spindle diameter: 40 mm Ncodpfxsyyi E Nj Alhsu Spindle speed: 5600 RPM Motor power: 9 kW Pneumatic material clamping Control via control panel

Condition: excellent (used), Edge Sander De Stefani MVT Njdpeydkbfsfx Alhscu 2 sanding units Maximum workpiece height: 80mm Self-adjusting sanding unit Manual adjustment of sanding unit Manual angle adjustment of unit Oscillating sanding units Feed speed controlled by variator Feed motor power: 0.74 kW

Condition: excellent (used), functionality: fully functional, Edge sander Minimax Unilev 150 Belt dimensions: 150 x 2170 mm Two belt speeds Table adjustable from 0–30 degrees Adjustable sanding height Ncedpsyqxutefx Alheu Belt oscillation Motor power: 3.3/2.6 kW CE mark

Condition: used, functionality: fully functional, Samco Unilev 15 Edge Sander Belt dimensions 150 x 2170 mm Two belt speeds Ncsdpfx Aljycpz Ueheu Adjustable shoe Tabletop adjustable at an angle of 0-30 degrees Adjustable grinding height Pneumatic sanding belt tension Sanding belt oscillation Motor power 3kw

Condition: good (used), Grinding range 400 x 200 x 410 mm Grinding wheel size 225 x 25 x 50.8 mm Magnetic plate 350 x 150 mm Nodpfewufkqex Alhscu MARCELS MASCHINEN CH

Condition: good (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: CA90H2 PIPE BENDING ROLL, shaft diameter: 90 mm, roller diameter: 260 mm, rotational speed (min.): 8 rpm, rotational speed (max.): 8 rpm, overall weight: 1,000 kg, total length: 1,260 mm, total width: 1,000 mm, total height: 1,260 mm, power: 3.68 kW (5.00 HP), input voltage: 380 V, type of input current: three-phase, operating speed: 8 mm/s, roll diameter: 260 mm, Equipment: documentation/manual, emergency stop, PROFILE BENDING ROLL SHAFTS OUTPUT 90 MM - PIPE BENDING ROLL MARGI CA90H2 YEAR 2007 SHATS OUTPUT SIZE 90 MM SET OF UNIVERSAL ROLLERS SIZE 260 MM LATERAL CORRECTOR ROLLERS LEFT/RIGHT SIDE SCREW ADJUST 4 SET OF ROLLERS FOR TUBE BENDING MM 61 - 78 – 90 – 116- CONSOLE ELECTRIC MOVABLE ON WHEELS ALL THE CONTROLS CENTRALIZED Njdpfxswkrr Ts Alhscu DIGITAL POSITION READOUT OF BENDING ROLLS UPPER ROLL DRIVEN MOTORIZED ELECTRIC POWERED WITH GEAR UNIT SIDE ROLLERS HYDRAULIC ADJUSTMENT POWERED INDEPENDENT WITH PISTON MACHINE REVERSIBLE CAN WORK WITH SHAFTS VERTICAL/HORIZONTAL. SAFETY AND EMERGENCY STOP EQUIPMENT INSTALLED WITH THE MACHINE MANUALS AND SCHEMATICS IN ORIGINAL ALONG WITH THE MACHINE WEIGHT 1000 KG DIMENSION 1260 X 1000 X H 1260 MM

Condition: good (used), functionality: fully functional, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 130 mm, roller diameter: 380 mm, rotational speed (min.): 5 rpm, overall weight: 4,500 kg, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, emergency stop, PROFILE BENDING ROLL 130- MODEL PARMIGIANI ITALY ELECTRO MECHANICAL MACHINE SHAFTS OUTPUT DIA..130 MM 3 ROLLERS PYRAMID UPPER ROLL DRIVEN ROTATION WITH GEARUNIT ONELECTRIC MOTOR Kw 11 SIDE ROLLERS BENDING POWERED ON ELECTRIC MOTOR Kw 3 Nedpfx Alexackcjhscu UPPER ROLL DIA 380 mm SIDE ROLLERS DIA 350 mm CONTROL PANEL UPGRADED LATEST TECHNOLOGY ELECTRIC INVERTERS FULL POWER CONTROL WITH INFINITE VARIABLE SPEED COMMANDS ELECTRIC ON PORTABLE PUSH BUTTONS DIGITAL POSITION READOUT OF THE BENDING ROLLERS WEIGHT OF THE MACHINE 4,5 TON SAFETY AND EMERGENCY SYSTEM INSTALLED MACHINE WORK WITH VERTICAL SHAFTS

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Tauring, controller model: digital readout, number of rollers: 3, shaft diameter: 70 mm, roller diameter: 245 mm, pipe diameter (max.): 100 mm, tube wall thickness (max.): 6 mm, overall weight: 1,300 kg, total length: 1,640 mm, total width: 1,220 mm, total height: 1,580 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, Profile bending roll Tauring Alfa 70H2 year 2003 -Hydraulic section bending machine with digital readout -3 rolls powered driven - -dual pre-pinch pyramid roll configuration Shafts output 70 mm – Size of universal rollers 245 mm Lateral correctors left/right side hydraulic motorized operated Machine reversible can work with shafts vertical/horizontal Tooling: -Set of universal rolls and spacers Pipe bending rolls set for tube 22,5 – 61 – 76 - ( see photos of the rolls in enclosed ) Ncodpfx Aeyx Dg Sslheu Power total installed 5,5Kw Vac 380/50 Dimension 1640 x 1220 x H1580 mm Weight 1300 kgs -CAPACITY CHART IN ENCLOSED

Condition: good (used), functionality: fully functional, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, shaft diameter: 100 mm, roller diameter: 300 mm, bending radius (max.): 500 mm, bending radius (min.): 500 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 5 rpm, pipe diameter (max.): 115 mm, tube wall thickness (max.): 3 mm, overall weight: 2,700 kg, total length: 150 mm, total width: 150 mm, total height: 150 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, operating pressure: 200 bar, year of last overhaul: 2026, Equipment: documentation/manual, emergency stop, hardened rollers, Profile bending machine model PP100 Output shafts 100 mm Ncodpfxjywhamo Alhju fully hydraulic operated lower shafts motion independent pyramid pinch -all the 3 shafts driven with gear unit and hydraulic motor -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Ncedswyda Ujpfx Alheu Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: used, Year of construction: 2002, Technical details: grinding length: 1500 mm grinding width: 700 mm workpiece height: 580 mm table load capacity: 2380 kp table speed -stepless-: 5 - 35 m/min grinding wheel dia. x width: 500 x 100 x 203 mm grinding wheel motor: 18 kW speeds:: stufenlos elektronisch total power requirement: 35 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 5,3 x 2,9 x 3,8 (3,18) m surface grinding machine, paper-filter, DRO 3 axis, automatic infeed, dwheel, Ncsdpfx Aeq Sbh Uolhou full cabin *

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Working area of the table: 500 x 300 mm Max. distance between table and spindle: 450 mm Longitudinal feed rate: 1 - 20 m/min Nsdpfx Aozgr Spjlhjcu Transverse feed rate: continuous: 0.2 - 2.0 m/min Stroke rate: 0.5 - 10 m/min

Condition: used, Year of construction: 2021, functionality: fully functional, grinding length: 6,000 mm, grinding width: 800 mm, total height: 800 mm, Technical specifications: • Application: Surface grinding and profile grinding • Grinding area: 6000 x 800 x 800 mm • Grinding wheel: 500 x 100 x 203.20 mm • Spindle power: 43 kW • Connected load: 89 kW • Operating hours: approx. 4,400 machine operating hours / approx. 1,600 spindle operating hours • Year of manufacture: 2021 The machine is currently fully functional and can be inspected at the supplier’s premises by appointment. Price is quoted ex works in Lower Saxony; the machine will be prepared/packaged for transport. The machine can be taken over immediately. Equipment: Ncodezcyccepfx Alheu • CAM profile grinding software “WinWop” • Diamond roll dressing unit with 160 mm diamond wheel • Coolant recirculation system • Grinding mist extraction system • Automatic balancing • Spark detection system • Belt filter system with magnetic separator • VPN connection for remote diagnostics/remote maintenance

Condition: good (used), functionality: fully functional, For sale is a TSC NX300 tool precision grinding machine from 1985. The grinding machine is in good condition, considering its age. Technical data: Manufacturer / Model: TSC / NX300 (NX series) Serial number: 2523 Drive power: 6.37 kW (approximately 8.5 hp) Electrical connection: 380 V (three-phase) / 50 Hz / 3 phases Accessories: 2-axis digital display; continuously adjustable electromagnetic chuck Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine purchase and sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality, yet affordable, metalworking machine for your production? Or do you want to sell yours? Ncsdpfozb H S Uex Alheu For more information or contact options, please visit our website.

Condition: good (used), Year of construction: 2013, grinding length: 500 mm, grinding width: 200 mm, total height: 1,750 mm, total length: 2,150 mm, total width: 1,450 mm, feed length X-axis: 550 mm, grinding height: 350 mm, grinding spindle motor power: 1,500 W, For sale is a surface grinding machine from the manufacturer Okamoto, model ACC 52 SA. The surface grinding machine is in very good condition and can be put into operation immediately. Technical specifications: Manufacturer: Okamoto Machine Tool Model / Type: ACC 52 SA Year of manufacture: 2013 Max. grinding length: 500 mm Max. grinding width: 200 mm Distance from table surface to spindle center: approx. 422 mm Size of magnetic clamping plate: 500 x 200 mm Table speed (hydraulic): 0.3 – 25 m/min Grinding wheel dimensions: Ø 205 x 19 x Ø 50.8 mm Spindle speed: approx. 3,000 rpm Spindle motor: 1.5 kW Total machine weight: approx. 1,700 kg Transport and loading can be arranged throughout Europe, for an additional charge, upon request. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? Nedpszb E Hdsfx Alhocu For more information or contact options, visit our website.

Condition: good (used), Year of construction: 1990, functionality: fully functional, grinding length: 1,200 mm, grinding width: 500 mm, total height: 2,540 mm, total length: 4,250 mm, total width: 2,270 mm, rapid traverse X-axis: 20 m/min, travel distance X-axis: 1,350 mm, grinding spindle speed: 1,500 rpm, power: 7.5 kW (10.20 HP), For sale is a PROTH PSGC-50120AHR surface grinding machine. The item is in good condition. Working area & travel distances: Max. travel (cross x longitudinal): 560 x 1350 mm Grinding area / table surface: 500 x 1200 mm Max. distance from spindle center to table surface: 700 mm Max. height from table surface to the bottom edge of the standard grinding wheel: 522 mm Axis movements & feeds: Longitudinal movement (X-axis): Table speed (hydraulic): 1 – 25 m/min Cross movement (Z-axis): Intermittent cross feed (electromechanical): 0.1 – 15 mm/feed Continuous cross feed (rapid traverse): 2000 mm/min (at 50 Hz) / 2400 mm/min (at 60 Hz) Handwheel feed per revolution: 5 mm (scale division: 0.02 mm) Nsdpfx Alezb Er Hohscu Vertical feed (Y-axis): Rapid traverse (optional/equipment): 200 mm/min Handwheel feed per revolution: 0.25 mm (scale division: 0.002 mm) Grinding spindle & grinding wheel • Grinding wheel dimensions: 355 x 50 x 127 mm • Spindle speed (50 Hz / 60 Hz): 1500 / 1800 rpm • Spindle motor: 7.5 kW (optional 11 kW) / 10 HP Transport dimensions & weights: Machine weight (net): approx. 6,100 kg Machine weight (gross/transport weight): approx. 7,500 kg Transport dimensions (L x W x H): 4.25 x 2.27 x 2.54 m Hydraulic motor: 3.7 kW / 5 HP

Condition: ready for operation (used), Year of construction: 1988, Horizontal surface grinding machine Okamoto Type PSG 63 – UAN Year of manufacture: 1988 Grinding length: 600 mm Nedpjzg Tgnofx Alhscu Grinding width: 320 mm Max. workpiece height: 500 mm Table travel (longitudinal): 750 mm Table travel (cross): 340 mm Grinding wheel diameter: 350 mm Grinding wheel width: 40 mm Spindle speed: 1500 rpm Rapid vertical feed: 400 mm/min Power: 3.7 kW Automatic feed Magnetic chuck Coolant system Weight: 2500 kg Price: EUR 2,000—plus VAT, ex location

Year of construction: 2016, condition: ready for operation (used), A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible. Nodpfx Alozg Iqnshscu

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Ncodpfx Aljglaq Iehou Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. The machine had 2 driven rollers. Total weight of all rollers: 57 kg. Good condition.