Used Systemair Evaporator Coil For Direct Expansion for sale (9,460)

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Nedpfoif Sg Sex Airown Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,000 kg, roll diameter: 60 mm, total width: 6,200 mm, total length: 3,000 mm, total height: 2,000 mm, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, height adjustment type: mechanical, travel distance Y-axis: 1,200 mm, transport height: 2,200 mm, transport length: 6,200 mm, transport width: 2,400 mm, input frequency: 50 Hz, power of the servo motor: 3,500 W, Destacking device and feed table for four-side planners Fully automatic destacker and feed table Designed for sawing 2-edged and 4-edged cant Productivity - 120 m3 per shift (10 hours) Nwsdpfov H R Dhjx Airen Complete set: destacking device, feed table

Condition: good (used), Foot valve, foot pedal, 5/2 way valve, solenoid valve, hydraulic valve, oil valve, pressure valve, valve block, control block Nwsdpfx Aocud I Soirjn -Manufacturer: David Brown Hydraulics -Type: C9193430351 -Type: SNF05 137 -Quantity: 1x valve available -Weight: 1.1kg

Condition: good (used), Motor protection switch, star-delta switch, reversing switch Njdpfxeb A Sczj Airjwn -Type: NNWYehb 15 -Adjustment range in amperes: 1.3 - 2.0 -Price: per piece -Quantity: 10 pieces available -Weight: 0.8 kg

Condition: used, Contact expansion block, safety relay -Type: PZE X4 24VDC 4n/o -Number: 76x shooters available -Price: per piece -Weight: 0.2 kg/piece Nwsdjb N Ulqjpfx Airon

Year of construction: 1991, condition: good (used), coil weight: (2 x 15 t) / 1 x 30 t coil width: max. 1.900 mm coil OD: max. 1.900 mm Nwodpfjbh Dg Sex Airen

Condition: used, Year of construction: 1996, operating hours: 14,240 h, 1996 | Sennebogen 625 M for parts only | Used Mobile Crane | 14240 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: As a source for spare parts: Many components have already been removed. The engine and hydraulic pump are present, and the axles are complete. However, some hydraulic parts as well as the joysticks and displays are missing. The engine is also reported to have defects. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40537 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Nodjzrlyqjpfx Airjwn ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Graf Wet Blasting System Nodoztyzlepfx Airswn Machine type: Wet blasting system Manufacturer: Graf Technik GmbH Type: Compact 2 Plus Year of manufacture: 2013 Control system: Siemens Origin: Germany Location: Albstadt Delivery time: upon agreement

Year of construction: 2021, condition: like new (used), functionality: fully functional, Component 1: ATM-800 P Tangential Dereeler (2 pieces) Heavy-duty dereeler for controlled unwinding of copper wire coils. • Max. coil diameter: 800 mm Nwjdez Ap R Ispfx Airsn • Max. coil width: 300 mm • Pickup hole: Ø52 / Ø56 mm • Max. coil weight: 300 kg • Braking force: 100 - 2000 N • Brake torque: 3 - 800 Nm • Max. speed: approx. 5 rpm • PLC control with torque sensor Component 2: HBK-40-S Automatic Taping Machine Professional automatic taping machine for coil and conductor insulation. • Servo-controlled taping head • Operator terminal and display • Integrated X-axis guidance • Electric hysteresis brake • Automatic overlap control via encoder • Suitable for various insulation materials

Condition: used, This listing is for a second-hand Konica Minolta accessory: the ‘Konica Minolta LS-507 Stacker’ Compatible with various Konica Minolta AccurioPress models (code WY1) Nodpfsy R Ntbox Airjwn Condition: This is a second-hand item, which may show signs of use (minor scratches or discolouration). The device has been tested for functionality Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: new, Year of construction: 2026, functionality: fully functional, Ticab Printing System TPS is an innovative cantilever equipment. It allows feeding huge items beneath the print head. The print head can be adjusted up to 30 cm above the conveyor belt to feed folded cardboard boxes or other huge items. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches and water after the image dries. Call us to get a beneficial commercial offer. Specifications:  Print area width: up to 29.7cm (11.7 in)  Print area length: from 2.54 cm (1 inch) to 91.44 cm (36 inch)  Workpiece movement speed: up to 45.72 cm (18 in) per second  Printing speed: up to 50--70 copies\min A4, up to 16 copies\min A3  Print resolution: 1200x1200dpi Njdpfxeu Ibhwj Airewn  Number of inkjet nozzles: 59136 (14 printing zones of 4224 nozzles each)  Colors: CMYK (Cyan, Magenta, Yellow, Black)  Ink type: water-based pigment ink  Information connection: Ethernet 10/100/1000 Base-T network port  Operating system: Windows (recommended Windows10)  Hewlett Packard HP driver  Trusted by professionals in 55 countries worldwide!

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902037809, empty load weight: 7,722 kg, maximum load weight: 31,278 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: white, Archive photos shown. Vehicle may still be in operation. Fliegl Coil Curtainsider Semi-Trailer Chassis: Approx. 8,040 mm reinforced coil well with coil cover, 8 removable coil posts, 4 pairs of internal coil pockets, 1 pair of lashing adapters for coil posts, 4 pairs of removable 6 t Vario-Lash lashing rings, 7 pairs of 5 t lashing rings in the outer frame, 9 pairs of 5 t lashing rings in the coil well, 1 pair of 5 t lashing points in the longitudinal beam, pallet box for 8 Euro pallets, heavy-duty pallet stops with lashing points, spare wheel carrier, 2 lockable plastic toolboxes, galvanized rear forklift mounting bracket, 5 pairs of outer stake pockets and 3 centre stake pockets compatible with coil stakes. Axles & Suspension: SAF disc brake axles, laser-aligned axle geometry for reduced tyre wear and fuel consumption, TIS automatic tyre inflation and pressure monitoring system, air suspension, automatic lift axle with forced lowering, traction aid and electric truck control. Nodszl D Iyepfx Airewn Braking System: Dual-line air brake system with colour-coded air lines, aluminium air tank, spring parking brake, raise/lower valve with auto-reset, AAC Basic automatic unloading axle (manoeuvring aid up to 20 km/h), WABCO SmartBoard displaying axle loads, mileage and diagnostic messages, axle load monitoring via EBS CAN bus. Wheels & Tyres: 435/50 R19.5 tyres with polished aluminium wheels. Electrical: 2 × 7-pin and 1 × 15-pin front sockets (without connecting cables), 2 × 7-pin rear sockets for truck-mounted forklift. Floor: Approx. 30 mm plywood floor for forklift axle loads up to 5,600 kg. Front Wall: Front bulkhead with two pairs of lashing rings and integrated storage compartment accessible from inside. Side Posts: 3 pairs of sliding posts, 5 post positions, 6 widening adapters (+25 mm each). Load Securing: 7 rows of aluminium side slats, 1 pair of Vario steel slats and 1 Vario locking beam for front and rear load securing. Roof: Fliegl Blitz sliding roof, Anti-Ice system with central air hose and automatic venting via brake light signal, Fliegl Easy Fix system with 12 pairs of strap holders integrated into the roof bows, EcoLift lifting roof (approx. 380 mm).

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,800 kg, maximum load weight: 27,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: original, Year of construction: 2026, Customized transport solution Configure your Fliegl trailer according to your requirements. The vehicle shown is an example only. Production and equipment are customized according to customer specifications. # Chassis Heavy-duty HANGLER welded construction made of high-quality steel with tapered welded main beams and reinforced neck section with double centre web. Punched Z-profile cross members with welded side frame. Replaceable 2" kingpin with chamfered skid plate. 18 pairs of recessed lashing rings (2.5 t each) and 8 pairs of recessed folding lashing rings (5 t each). 24 t two-speed landing gear, one-side operation. 2 wheel chocks with holders. Aluminium side underrun protection. Plastic mudguards in front of and behind each axle with anti-spray mud flaps. Rear underrun protection and full-width rear mud flap. Approx. 8,000 mm covered coil well divided by approx. 40 mm inclined loading beams. Stake pockets and supports for FR 80/80/4 stakes, fully hot-dip galvanized. 80/80 plug-in stakes with reinforced lower section. Hydraulic inclined loading system with 4 cross beams. Hydraulic supply via tractor through a 2-line hydraulic system (pressure/return) with double Faster couplings. Inclined loading beams with integrated height-adjustable telescopic extensions. Multi-stage hydraulic cylinders with universal joints. Adjustable supports with locking pins. Cylinder openings protected by strip brushes against dirt and weather. 5-function control valve for inclined loading system and folding mechanism. Sliding roof system with tarpaulin apron cover. 1 tank-end support set with height-adjustable support pins for different tank diameters, including storage bracket. Front impact stop for inclined loading platform. # Axles + Suspension Disc brake axles Offset axle spacing 1,310 / 1,450 mm Air suspension Nedpfx Aji Riw Hsirewn # Brake system Dual-line compressed air braking system Aluminium air tanks Spring parking brake Axle load detection via EBS CAN bus Tyre Pressure Monitoring System (TPMS) according to ECE R141 with display in the towing vehicle via EBS # Wheels and tyres 435/50 R19.5 tyres # Electrical system 24 V electrical system Multi-chamber lighting Yellow LED side marker lights Flashing LED side marker lights synchronized with turn indicators 2 × 7-pin and 1 × 15-pin front sockets Additional 7-pin rear socket (ISO 1724) integrated into the underrun protection Double LED illuminated warning panels, extendable to 3,000 mm, removable with plug connection LED rotating beacon with holder, switched via parking lights # Floor Approx. 30 mm phenolic plywood floor, flush-mounted with the side frame # Front wall Fixed aluminium hollow-profile front wall, approx. 2,400 mm high, with timber slats above. Interior reinforced with 3 mm aluminium wear plate up to approx. 630 mm from floor level. # Posts 2 fixed front volume corner posts, approx. 2,400 mm high 3 pairs of Kinnegrip centre posts, approx. 600 mm high, with Kinnetop extension to approx. 2,000 mm 1 pair of removable and foldable rear corner posts made of aluminium hollow profiles, approx. 600 mm high, reinforced internally up to the first slat row Integrated curtain bow recess with two rows of curtain bows. # Roof EDSCHA Profi 95 sliding roof system with straight roof frame and steel scissor mechanism for full curtainsider tarpaulin. Mechanically adjustable roof.

Condition: used, axle configuration: 3 axles, first registration: 12/2003, color: other, Year of construction: 2003 Empty weight: 6.500 kg Axle 1: left 10 mm right 16 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right10 mm We have the possibility to stack trailers!  Nsdpfx Aijx Elfiorjwn

Year of construction: 2009, condition: ready for operation (used), A double-sided trolley cooling system Werner & Pfleiderer for bread production is available. Refrigerant: R404A, refrigerant type: HFC, minimum temperature: -25°C, design temperature low pressure/high pressure: -45°C/50°C, design pressure low pressure/high pressure: 16bar/28bar, internal dimensions X/Y/Z: 1800mm/1200mm/1900mm. Machine dimensions X/Y/Z: approx. 2750mm/2200mm/3150mm. Baguette target temperature/cooling time: -20°C/28min, bread roll target temperature/cooling time: -20°C/14min, pretzel target temperature: -14°C. Documentation available. An on-site inspection is possible. Nwedpfszdknqex Airjn

Condition: used, empty load weight: 7,725 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 11/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 93 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2018, mileage: 3,14,581 km, Equipment: ABS, Poids à vide: 7725kg, Poids total admissible: 38000kg, Certificat DIN EN 12642 (code XL), Espace de charge (L L H): 13.620 mm x 2.480 mm x 2.780 mmLa taille du pneu: 385/65 R22.5, Volume espace de charge: 93 m³, 1er essieu: , 2ème essieu: , 3ème essieu: , Suspension pneumatique, Dispositif anti- encastrement, Système de freinage électronique EBS, Porte-extincteur, Coffre à outils, Porte roue de secours (2x), Châssis boulonné, Toit coulissant, Fiche de raccordement 1x15 et 2x7 broches, Anti-spray, Disques de frein Essieu 1 39 mmPlaquettes de frein Essieu 1 40% d'usure Disques de frein Essieu 2 43, 5 mmPlaquettes de frein Essieu 2 20% d'usure Disques de frein Essieu 3 40 mmPlaquettes de frein Essieu 3 40% d'usureMines 10/2026 -, Vous trouverez un aperçu de tous nos véhicules disponibles sur notre site web . Besoin d’un financement ? Nous proposons des financements individualisés, ainsi que du full-service ou un service télématique.Nous serons heureux de vous conseiller personnellement. Nodsx S Spzspfx Airjwn

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Year of manufacture: 2012 Model: 2 MVR 1 Feed rate: 35,000 l/h with whey Evaporation capacity: up to 25,000 kg/h Type: MVR evaporator with TVR finisher (High-)concentrator: from 20 up to 60% DS Including pasteurizer via steam injection MVR compressor: PILLER MVR compressor power: 456 kW Steam consumption finisher: ~900 kg/h Steam consumption pasteurizer: 900 - 1,700 kg/h Nsdjyvrwtspfx Airswn

Condition: used, empty load weight: 7,725 kg, axle configuration: 3 axles, first registration: 11/2018, suspension: air, Year of construction: 2018, Equipment: ABS, Poids à vide: 7725kg, Suspension pneumatique, Dispositif anti- encastrement, Système de freinage électronique EBS, Fiche de raccordement 1x15 et 2x7 broches, Anti-spray, Disques de frein Essieu 1 37,00mm Plaquettes de frein Essieu 1 60% usure Disques de frein Essieu 2 37,3mm Plaquettes de frein Essieu 2 80% usure Disques de frein Essieu 3 36,5mm Plaquettes de frein Essieu 3 80 % usureMines 09/2026 -, Vous trouverez un aperçu de tous nos véhicules disponibles sur notre site web . Besoin d’un financement ? Nous proposons des financements individualisés, ainsi que du full-service ou un service télématique.Nous serons heureux de vous conseiller personnellement. Nwsdpjytzuzsfx Airen

Condition: ready for operation (used), * Model: rolls for rollertables Nodpfx Aieywmfherewn * Rolls with size: 500mm x 89mm * Type: SW 14 * Price : €11 a piece * Stock: 2200 pieces.

Condition: excellent (used), Two side evaporator GEA KUBA Nodpfx Aiov E Hckjrswn -Type: DRS 34637 -Cooling capacity: 46 kW at DT8 -Fin spinning: 7 mm -Fans: 4 x 630 mm -Dimensions: 4500 x 1450 x 700 mm -Block made of stainless steel -Refrigerant: NH3 -Volume: 54 L -Weight: 580 kg -Quantity in stock: 2 -Reference number: CH 535 -Condition: Used in good condition

Condition: excellent (used), Two side evaporator GEA KUBA -Type: DRS 44637 -Cooling capacity: 60.7 kW at DT8, 58 kW at DT7 -Fin spinning: 7 mm -Fans: 4 x 630 mm -Dimensions: 4500 x 1550 x 700 mm -Block made of stainless steel -Volume: 72 L -Weight: 650 kg -Quantity in stock: 3 -Reference number: CH 535 Nsdpfovw Np Rox Airewn -Condition: Used

Condition: excellent (used), Evaporator Guntner -Type: S-GHN 081B/37 -Cooling capacity: 82.3 kW at DT8, 63.7 kW at DT7 -Fin spinning: 7 mm Nwsdpswhunxjfx Airjn -Fans: 3 x 810 mm -Dimensions: 5450 x 1000 x 1300 mm -Refrigerant: Freon -Volume: 112 L -Weight: 619 kg -Quantity in stock: 1 -Reference number: CH 548 -Condition: Used in good condition

Condition: new, functionality: fully functional, Year of construction: 2026, The wobbler feeder is a feeding system that delivers superior performance, especially when handling large, sticky, and moist materials. Its structure, consisting of rotating elliptical rods, creates a vibrating motion during material flow. This motion separates fine materials from larger particles and provides consistent feeding to crushers and screens. As a result, clogging is prevented and the overall efficiency of the plant is increased. Widely used in the mining, aggregate, and recycling industries, wobbler feeders are typically placed in front of primary crushers. This ensures that the material undergoes pre-screening in the initial stage. Its ability to operate without clogging, even with sticky and clayey materials, makes it an ideal solution for demanding conditions. Its mechanically simple design, ease of maintenance, and long-lasting performance keep operating costs to a minimum. With these features, wobbler feeders are a reliable choice for all plants requiring a continuous and balanced material flow. Wobbler Feeder Technical Specifications Body Liners: HARDOX 450 – 10 mm Feeding Capacity: 150 - 200 t/h Weight: 18.5 tons Dimensions: 4,000 x 1,000 mm Wobbler Motor: 14 x 3 kW, 1500 rpm, GAMAK brand Gearbox: Heavy-duty type Walking Platforms: Available Steel Feet: Available Why Choose CONSTMACH Wobbler Feeders? CONSTMACH wobbler feeders stand out with their high-quality, durable materials, heavy-duty gearboxes, and ease of maintenance. Each one is designed to offer long-lasting, low-cost operation. HARDOX body liners provide maximum resistance to wear, while the adjustable design easily adapts to different material types. CONSTMACH is a trusted name in the industry for its production quality, engineering support, and after-sales service. Invest in a wobbler feeder with the CONSTMACH guarantee for the continuity and performance of your facility. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products designed to meet the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Nwodexqcn Aspfx Airjn

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp Nodsxz Ab Rjpfx Airjwn * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Condition: used, Two-side evaporator Goedhart -Type: DRS 52504 -Cooling capacity: 22.7 kW -Fin spinning: 4 mm -Fans: 2 x 500 mm -Dimensions: 2260 x 1600 x 530 mm -Stainless steel housing and block -Volume: 28 L Nwedsxpughepfx Airen -Quantity in stock: 5 -Reference number: CH 571 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work