Used Tacchi Hd 1000 for sale (9,879)

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit Iajdol Nbqcepfx Amyst - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Straightening and welding plate, cast steel / grey cast iron, heavily ribbed Heavy-duty straightening plate Length: 1985 mm Width: 1000 mm Thickness with ribs: 220 mm Working height: 860 mm Plate thickness: approx. 35 mm throughout - 4 height-adjustable feet Iajdpekpwuxofx Amyet Weight: 1050 kg

Condition: excellent (used), Year of construction: 2009, Large working width: 1020 mm Isdoy S Abujpfx Amysat For sheet metal (with a tensile strength of 40 kg): up to 2 mm Small bending width: 10 x s Small inner radius: 1.5 - 2 x s Opening width of the upper die: 190 mm Highest working point of the upper die: 120 mm Lowering distance of the lower die: 60 mm Small box profile (W x H): 165 x 125 mm Space requirement (W x D): 1700 x 550 mm Height with raised counterweight: 1650 mm Weight: 560 kg

Condition: ready for operation (used), Year of construction: 1993, Flow rate: 180 - 1000 l/h Working pressure at delivery volume 16 l/min max.: 180 bar Drive motor: 380 V, 7.5 kW Space requirement: 900 x 420 x 870 mm Iodpfx Aeyh Hpqomyoat

Condition: used, thickness of jaw 160 mm max. clamping width 302 mm weight ca. 60 kg length in total 770 mm Ijdpfx Asy S Dtromyjat Allmatic 160 hydraulic vice with adjustable clamping pressure Span S1/mm: 0-152 Span S2/mm (can be changed with locking pin): 147-302 Clamping force levels: 4 Max. clamping force in kN: 60 Design: Mechanical min. Clamping width/mm: 0 Workpiece: Pre-machined part Jaw width/mm: 160 Max. clamping width/mm: 302 Max. clamping width: 302mm - incl. 2x clamping claws - Without vice spanner

Condition: new, Year of construction: 2026, table length 1000 mm table width 1000 mm table height 200 mm weight 300 kg Manufacturer: GERD WOLFF Website: Technical Details: • Length 1000 mm • Width 1000 mm • Height 200 mm • Weight 300 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 Iaodsy S D Naepfx Amyst • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN Iodpfx Amoy Snkbeysat heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: good (used), Year of construction: 1994, Clamping Unit: Clamping force: 7,000 kN Iajdpfxjy Sni Rj Amyot Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: new, Year of construction: 2026, functionality: fully functional, 600 HD available immediately Serialnumber 965 Special price from our stock 06188 Landsberg, Germany The 600HD alligator shear is a fast and strong metal cutting shear with an extended hold down clamp, making it ideal for every cutting and cleaning task whether cable, plastic sections or window frames. Its cutting capacity is up to 63mm, 2″ inch mild steel round bar. The 600HD alligator shear is probably best known for dealing with car radiators. It was designed and built following requests from customers who were looking for a shear with a longer blade to cut larger items such as car radiators which it cuts through in one pass. The automatic hold down clamp holds material in place during the cutting cycle and prevents kick back which speeds up processing and improves operator safety. Iajdsib Ircopfx Amyet As with all McIntyre shears, opening and closing the jaws is controlled from a moveable foot pedal. As soon as the foot pedal is released, the cutting blades return to the open position. However, a continuous cutting action can be achieved by keeping foot pressure on the pedal. The 600HD can be supplied with an electric motor or with a 2-cylinder diesel engine.

Condition: new, pressure 180 t stroke 400 mm column daylight 1500 mm Frame Width 550 mm distance spindle /table max. 1000 mm total power requirement 7,5 kW Front light range 1550 mm Lateral light range 550 mm weight of the machine ca. 2100 kg dimensions of the machine ca. 2300x1200x2850 mm Iasdpfsyv I S Hex Amyot Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark

Condition: new, table diameter 900 mm table load 1.000 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1,1 UpM T-slots 6 x M16 Tilt Angle 90-180-105 ° Tilting Speed 30 sn min./90° Iodpfxeyv I Rie Amyeat dimensions 2100x920x1100 mm weight of the machine ca. 930 kg

Condition: used, Year of construction: 2006, Working width ca. 1.000 mm feed: pneumatisch Iedpjx Ivk Ujfx Amyoat Spindle diameter 40 mm

Condition: used, Stand height: 192 cm Floodlight: Max. 1,000 W 2 ESYLUX HAST 1000 floodlights with stand and switching unit for illuminating and heating workpieces, workspaces, or other application areas. Iajdpfx Amoqy Rq Ijyst

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 36 m/min, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BT-40 spindle with BBT (BIG-PLUS) interface, 18.5 kW power and head-mounted cooler. High-pressure cooling through the spindle. CNC HEIDENHAIN TNC 530 with remote electronic handwheel. Belt chip conveyor. Tool presetting. CE standards. Installed in 2008. Machine only, without vice and without toolholders. Iajdpfx Asydlkbsmyjt

Condition: used, Year of construction: 2012, max. working width: 1000 mm workable material thickness: 0,5 - 50 mm Total power: 82 A Total current consumption: 44,5 kW Insulation class: IP 42 Iajdpsy Sp Hdsfx Amyet Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg Standard configuration SBM-M D 1000:Two-side slag removal of plasma and thermal cut sheets up to 120 mmSaving of tool costs incurred by mechanical deslagging –no time-consuming and expensive grindingTwo-side slag removal saves the time intensive turning of the often very heavy workpieces or machining of parts twiceUp to 60 % work time savings compared to one-side processing machinesModular and compact in modern machine design - smaller footprintDry operationThe cross-machining principle guarantees uniform tool utilisation over the entire working er and lower assemblies separated can be adjusted or turned on and off electricallyInnovative tooling and material feed system allows for optimum handling of burrs and uneven surface of piecesMaximum productivity while maintaining machining qualityImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Systems; Material Handling; Robotics & Automation; Processing Tools SBM-XL 1000:Deburring and edge rounding of parts up to 120 mm material thicknessProcessing both sides of the parts simultaneously eliminates the need of turning heavy parts and processing them for a second timeSimultaneous deburring and edge rounding on interior and exterior contoursDry operationSimple, intuitive operationThe processing units can be individually adjusted or turned on and off imum productivity while maintaining machining qualityThe cross-machining principle guarantees optimum tool utilisation over the entire working ter and simpler tool change within just a few minutesModular and compact in modern machine design - smaller footprintImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Technology; Handling Systems, Automation; Custom SolutionsFor repeated customer requirements, processing parameters can be called up quickly and easily through predefined to 60 % work time savings compared to one-side processing grinding machines Extended machine accessories - 2 x dust extractor - 2 x conveyor belt

Condition: new, The DURMA AD-S 601000 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1000 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Iaedpfx Amovwm A Isyet Technical details: - Model: DURMA AD-S 601000 - Pressing force: 1000 tons - Working length: 6 meters - Control: SKY22 (3D control) - Back stop: 6 axes (X1, X2, R1, R2, Z1, Z2) - Bending aid: AP3-AP4 integrated for optimized handling of heavy workpieces - Condition: As good as new, available immediately Features and advantages: - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the 6-axis back stop control - Support for heavy and large sheets thanks to integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz Isdpfxeudxcho Amysat 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, table length 1000 mm table width 1000 mm table height 200 mm weight 300 kg Our welding tables are manufactured with HT 300 casting quality. All welding tables are also available in a nitrided version. • Plate thickness: 25mm All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum 665 mm. Iedpfxsymf Tuj Amyeat Thus, a working height of 820 - 865 mm is possible. Further details on the production and characteristics of our tables can be found in our catalogue. The illustrations do not correspond to the original size and are for llustration purposes only. 3D welding table - 3D clamping devices - 3D precision welding table

Condition: excellent (used), Year of construction: 2004, operating hours: 292 h, overall weight: 160 kg, I am selling a Stolzenberg TTE 1000 sweeper. Stolzenberg TT E 1000 is a self-propelled sweeper with electric drive (batteries) designed for daily sweeping of large indoor areas (up to 8000m²), such as parking lots, small production halls and showrooms, etc. The suction system used allows removing dust and fine dirt also from textile surfaces (carpets, rugs). The sweeper does the work with two disc (side) brushes and cylindrical brushes, made of abrasion-resistant polyamide. TRS high-performance sweeping system Main brush drive Front/rear drive - to the rear axle through a differential mechanism Separate drive for each rear wheel Robust laser-welded frame construction, extremely impact resistant Rotating guards made of polyethylene Ergonomically positioned buttons Collects sand and fine dust Easy to operate Exceptionally large surface area of the filter and debris container Quick change mechanism of rollers and side brushes Very maneuverable (turning radius - 1 m) Quiet operation Electric filter cleaning system Extremely easy access for service work Trouble-free chain transmission Very powerful motor Ability to clean textile surfaces (carpets, rugs, etc.) Approximately 50% larger cleaning area compared to a manually operated sweeper having the same sweeping width Categories: STOLZENBERG, Sweeping machines Electric drive - 24 V, 900 W TWS sweeping method - two brushes Iedpfx Aoud A Hksmyjat Sweeping width - main brush (mm) 600 Width with 1 side brush (mm) 800 Width with 2 side brushes (mm) 1000 Chain transmission Brush drive yes Extraction yes Air flow rate (m³/h) 600 Trash container (l) 70 Filter surface area (m²) 3 Filter cleaning system electric Theoretical efficiency (m²/h) 6000 Practical output (approx. m²/h) approx. 70% of theoretical output = 4,200 Max. speed (km/h) 6 Max. surface slope (%) 20 Dimensions - L x B x H (mm) 1190 x 790 x 1089 Weight (kg) 160 ID: 905240967

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 15 h, Make: DURMA Type: HD-FS 3015 Fiber Working range X-Y-Z: 3100x1550x125 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 15 h Sheet thickness mild steel: 12 mm Sheet thickness stainless steel: 6 mm Sheet thickness aluminum: 6 mm Sheet thickness brass: 6 mm Sheet thickness copper: 3 mm Iaodpfx Asdx Ewgemyot Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Simultaneous X-Y axis speeds: 141 m/min. Positioning accuracy: +/- 0.05 mm Repeat accuracy: +/- 0.05 mm Installation area standard L/W/H: approx. 10000x7000x2300 mm Weight: approx. 13700 kg Standard equipment Manual single table Sinumerik 840D control system Manually focusing Precitec Procutter F125 focus cutting head Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Chip conveyor Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting either Metalix or Lantek Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 2000 Watt including cooler Filter, compact dedusting Vanterm Automatic shuttle table Automatic laser head positioning Cloud license Air conditioning in the control cabinet The machine can be viewed and demonstrated at our demonstration center in Staufenberg at any time by appointment. Further machines are available for demonstration at our Staufenberg site. We will be happy to send you further information on request.

Condition: new, 2021 Durma 15 kW Fiber Laser Make: DURMA Type: HD-F(L) 3015 Working range X-Y-Z: 3060x1530x160 mm Laser power: 15000 Watt IPG Control: Siemens Sinumerik 840D sheet thickness mild steel: 40 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 30 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Speeds X-Y axes simultaneous: 280 m/min. positioning accuracy: +/- 0,05 mm Repeating accuracy: +/- 0,05 mm Installation area L/W/H: approx. 14500x7500x2420 mm weight: approx. 12000 kg Standard equipment Automatic pallet changer Control Sinumerik 840D Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber exhaust system Special laser cutting options Remote maintenance CE marking IPG fiber laser source 15000 Watt including cooler Extended equipment possible: Filter, compact dust collector Vanterm Motorized chip conveyor for small parts/waste Laser Service Set Cloud License Lantek Expert Inside Software Iedpfogk Nlpex Amyeat Lantek software with positioning - laser diode with automatic sheet metal position detection, measurement Camera Inside Linear drive We will be pleased to send you further information on request.

Condition: new, Year of construction: 2024, HD-F fiber laser cutting systems Durma fiber laser cutting machines feature faster cutting and energy efficiency, especially compared to CO2 lasers. Thanks to the high-tech fiber laser cutting technology, the laser machines are easy to operate and maintain. With the highly efficient components used in Durma fiber laser cutting machines, you are provided with quality, performance and efficiency at the same time, which increases your business value. Thanks to high-precision helical gears, very high acceleration values (28 m/s2), high movement speed (170 m/min) and positioning tolerance values (0.05 mm) can be achieved. Durma fiber laser cutting systems are unique with their stable and modular machine body, excellent filter system, compact design and efficient and user-friendly structure. Iasdpfx Ajg Adu Homyot X axis: 6000 mm Y axis: 3000 mm Z axis 125 mm Max. sheet dimension: 6048x2024 mm Max sheet weight: 200 kg/m2 X axis: 100 m/min. Y axis: 120 m/mm. Synrochnization: 156m/min. Acceleration: 16m/s2 positioning accuracy: + 0,05 mm Repeatability: +0,05 mm Cutting thickness mild steel: 25 mm Stainless steel: 15 mm Aluminium: 20 mm Standard equipment Automatic shuttle table Control Sinumerik 840D Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface Parameters

Condition: as good as new (ex-display), Year of construction: 2024, Machine dimensions: - (L x W x H) 9,350 mm x 2800 mm x 2300 mm, length with filter 5300 mm. Technical details: - Max. Sheet size: 3,048 x 1,524 Max. Iedpjd N Rfdjfx Amyoat - Max. Sheet weight: 200 kg/m² -Laser power (IPG): 6 kW -Travel distance Z - axis: 125 mm -Max. Synchronization speed (X-Y): 141 m/min. -Max. Acceleration (X-Y): 10 m/s² - Positioning accuracy: ±0.05 mm - Repeat accuracy: ±0.05 mm Basic equipment: -Control: Siemens Sinumerik 840 D - Laser head: Precitec light Cutter F 125 Focus - Sheet position detection and measuring system -Positioning laser diode -Automatic plate changer -Automatic nozzle cleaner -Central lubrication unit - Chip tray - Software: Lantek, or Metalix Cad/Cam software with autonesting - Remote control: Remote maintenance Laser cutting options: - Pierceline (piercing settings) -Focusline - Plasmaline -Fastline - Flyline Options include: - Tower with 10 pallet positions - Automatic chip conveyor - Integrated camera (post-production of parts, micro-joints) - Air dryer - Auto. Nozzle Changer (automatic nozzle changer) - Inside camera

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 30 h, Equipment: centralized greasing system, dust extraction, emergency stop, fume extraction, safety light barrier, Tube Laser Cutting System Ideal for Entry-Level Applications. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for workshops, metal fabricators, and others looking to step into tube laser processing, this laser offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your production with precise cuts and user-friendly technology, adding value to your operation. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild Steel: 12 mm - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Maximum Tube Diameter: Ø250 mm - Maximum Square Profile Dimensions: 160x160 mm - Maximum Rectangular Profile Dimensions: 200x150 mm - Minimum Tube Diameter: 16 mm - Maximum Material Length: 6000 mm - Minimum Remnant Length: 65 mm - Unloading Length: 3000 mm - Semi-automatic unloading unit: optional (6m) - Maximum Material Weight: 58 kg/m - Maximum Total Workpiece Weight: 350 kg - Profile types that can be cut: Round, square, rectangular, elliptical - Open profile types that can be cut: I, C, L - Maximum open profile dimensions: 240x240 mm Dynamics: - X-Axis: 40 m/min - Y-Axis: 94 m/min - Z-Axis: 30 m/min - A-Axis: 510 °/s Accuracy: - Positioning Accuracy: ±0.2 mm - Positioning Variation: ±0.05 mm - Tube Center Detection with Capacitive Sensor: Yes Additional Available Configurable Options. LASER POWER: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar Air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar Air) - CNC oscillating head (+/- 45°) Iajdsrkntcepfx Amyot - Semi-automatic front loading system - Unloading table (6m) with conveyor - Unloading table (3m) with conveyor - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud License + D-Mobile + Smart Watch - STEP file importer

Condition: as good as new (ex-display), Year of construction: 2022, This price applies exclusively to the demonstration machine (freight and assembly extra). Machine Dimensions: Ioded R Uzrjpfx Amyeat • (L x W x H) 5,308 mm x 2,810 mm x 1,860 mm, Length with filter: 6,582 mm. Technical Details: • Year of manufacture: 2022 • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 2 kW • Z-axis travel: 125 mm • Max. simultaneous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 14 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm • Cutting capacity: • Steel: 12 mm • Stainless steel: 6 mm • Aluminum (AlMg3): 6 mm • Brass: 6 mm • Copper: 3 mm Standard Equipment: • Control system: Bosch Rexroth • Laser head: Precitec light Cutter F 125 Focus (manual) • Sheet metal thickness detection and measuring system • Positioning laser diode • Central lubrication unit • Chip tray • Software: Lantek or Metalix CAD/CAM software with AutoNesting • Remote control: Remote maintenance • Laser cutting options: • Pierceline (piercing settings) • Focusline • Plasmaline • Fastline • Flyline The machine can be inspected and demonstrated at our demonstration center in Staufenberg by appointment at any time. Other machines are available for demonstration at our Staufenberg facility. Further information is available upon request.