Used Vem Okpf7/4 for sale (59,120)

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, overall weight: 7,500 kg, grinding diameter: 300 mm, controller model: Siemens Sinumerik 840D Solutionline, No minimum price – guaranteed sale to the highest bidder! The control system was upgraded to a Siemens Sinumerik 840D Solutionline in 2014. The new control system was overhauled in 2016! TECHNICAL DETAILS Spindle speed range: 170–18,000 rpm Grinding diameter: 20–300 mm Swinging diameter: 350 mm (500 mm) Workpiece length: 300 mm (1,300 mm) Recommended grinding depth: up to 300 mm Center height above the workpiece table: 200 mm (300 mm) Center height above the grinding table: 330 mm (430 mm) Workpiece spindle bore: 50 mm (70 mm) Grinding table, Z-axis Total grinding table travel: 650 mm (950 mm) Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed rate: 0–9.99 m/min Feed rate: 0–99.99 m/min Incremental feed value during reversal: 0–0.999 mm Grinding table, X-axis Total grinding table travel: 150 mm Resolution: 0.001 mm/rev Rapid traverse: 5 m/min/rev Grinding feed rate: 0–5 m/min/rev Feed rate: 0–99.99 mm/min/rev Incremental feed value during reversal: 0–0.999 mm/rev Ijdszwmz Tjpfx Aiyjbb Workpiece spindle head, B-axis Swivel range: −32° (−23°) to +2° Resolution: 0.0001° (0.36″) U-axis Total travel: 300 mm Resolution: 0.001 mm/rev Traverse speed: 5 m/min MACHINE DETAILS Control system: Siemens Sinumerik 840D Solutionline Machine weight: approx. 7.5 t Space requirement: approx. 5.00 × 4.00 × 2.20 m

Condition: good (used), electric motor, three-phase motor Ibsdpfx Aijdzyl Hjysb -Power: 1.1 kW -Speed: 1415 rpm -Shaft: Ø 22 x 50 mm -Design: B3 -Protection class: IP 44 -Dimensions: 300/157/H200 mm -Weight: 17 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, color channels: 4, total length: 3,860 mm, total width: 1,470 mm, Equipment: documentation/manual, Plus Version: prepared for numbering & perforating unit Perfecting 2:2 Classic Center Powder sprayer Electronic double sheet detector New rollers VARN Kompac III Ibsdpoy Efqlefx Aiysb The Heidelberg GTO 52-4-P3 is a professional four-color small-format offset printing press, renowned for its reliability and precision in commercial job printing. This model features an integrated perfecting system, allowing for double-sided printing of sheets in a single pass. Key Technical Specifications Max. sheet size: 360 x 520 mm (B3 format) Min. sheet size: 105 x 180 mm (one side) / 140 x 180 mm (both sides) Printing speed: Up to 8,000 sheets per hour Substrate thickness: 0.03 mm to 0.4 mm Colors: 4 printing units Plus Version: This machine is designed as a "Plus Version," which includes preparation for additional numbering and perforating units (N+P). Control: Equipped with the Classic Center for central control of ink supply and register.

Condition: used, Year of construction: 2023, operating hours: 259 h, functionality: fully functional, machine/vehicle number: 1200002, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in excellent optical and technical condition. The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed: - Axis cards for the 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw measuring probe and tool probe In addition, the machine is unusually well-equipped: - TSC – internal coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic replenishment, oil separator, mist collector) - Fast 30+1 tool changer - Spindle with 10,000 rpm The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring. This makes the machine immediately ready for demanding machining tasks. The original transport securing devices are available. An original Haas tool cart for SK40 is also included. Inspection and demonstration under power are possible at any time by appointment. Loading and transport can be arranged. A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply. Technical data: - Travel ranges X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Feed rate max.: 16.5 m/min - Tool changer: Side SMTC, 30+1 positions - Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) - M130 media display, safe run, synchronized thread drilling - Early detection module for power failure, overvoltage protection - Equipment / options (all installed from the factory) - 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw measuring probe system (intuitive) - TSC – internal coolant supply through the spindle, 21 bar - Spiral chip conveyor - Coolant maintenance package (automatic replenishment, oil separator, mist collector) - Additional coolant filter (bag filter 25 µm) - Filter set for chip sump (200 µ) Ijdpfx Aijy Tp E Ajysbb - Variable coolant flow (M-code controlled) - Blowing of the inside of the machine door - Lifting eyes, touchscreen, door lock

Condition: used, Three-phase motor, electric motor -Power: 10 kW -Speed: 1430 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: EX -Dimensions: 550/440/H315 mm Ibeded Al Hvepfx Aiysb -Weight: 113 kg

Condition: used, Gear motor, electric motor -Speed: 40/80 rpm -Power: 0.7/0.91 kW -Construction: B5 -Shaft diameter: Ø 48 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 685/240/H320 mm Ibsdjd Al Hwjpfx Aiysb -Weight: 60 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 11,688 h, load capacity: 3,000 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: triplex, power: 44 kW (59.82 HP), empty load weight: 4,680 kg, total height: 2,200 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, lighting, trailer coupling, Linde H30D diesel forklift Year of manufacture: 2003 According to the hour meter: 11,688 operating hours Iedpfxezw Dbde Aiyobb 3-ton lifting capacity 2.2-meter overall height 4.6-meter lifting height 44 kW VW engine - Triple-stage free-lift mast - 3rd and 4th valve for fork carriage - Semi-cabin - Radio and heater - Work lights - Immediately ready for operation - Visually like new! Selling price: €9,500 (net) Affordable delivery also possible!

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor Ibsdpfjghidtjx Aiyob -Speed: 16/31.5 rpm -Power: 0.3/0.55 kW -Construction: B3 -Shaft: Ø 48 x 110 mm -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 580/250/H270 mm -Weight: 43 kg

Condition: ready for operation (used), Year of construction: 2007, Stiefelmayer Brivisor KL-4 Hardness Testing Machine Testing height: 150 mm (with testing table) Outreach: 200 mm Device footprint: 560 mm x 250 mm x 770 mm (W x D x H) Load range: 0.05 - 10 kgf Weight: approx. 45 kg Year of manufacture: 2007 Vickers: HV 0.1 | 0.3 | 0.5 | 1 | 2 | 3 | 5 | 10 Brinell: HBW 1/5 and HBW 1/10 Iodpfx Aozzynhsiyebb You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the article may occur and are subject to change.

Condition: used, Year of construction: 1993, functionality: fully functional, total height: 2,200 mm, total width: 2,500 mm, total length: 2,800 mm, type of input current: AC, overall weight: 4,500 kg, input voltage: 380 V, nominal power: 38 kW (51.67 HP), NOMOCO VSRS-280 CNC 4 – Centerless CNC cylindrical grinding machine We are offering a NOMOCO VSRS-280 CNC 4 centerless cylindrical grinding machine, manufactured in 1993, in very good condition and fully functional, for sale. The machine is currently in operation and can be inspected on-site after prior appointment. This provides the opportunity to directly verify the machine's function and current technical condition. The Siemens CNC control system, as well as the CNC-controlled X, Y, Z, and C axes, enable precise and reproducible machining. The machine is particularly suitable for industrial applications where a reliable and economical solution for centerless cylindrical grinding is required. Iedpfx Aioyr Sh Aoyobb Technical Highlights Manufacturer: NOMOCO Model: VSRS-280 CNC 4 Year of manufacture: 1993 Machine type: CNC cylindrical grinding machine, centerless Control system: Siemens CNC-controlled axes: X / Y / Z / C Condition: Used, very well-maintained overall condition Availability: Immediately Inspection: Possible by appointment Machine currently in operation Axis configuration Axis Function X-axis Infeed slide Y-axis Truing spindle S Z-axis Truing slide S C-axis Support U-axis Support R W-axis Truing slide R Dimensions & Weight Overall length: approx. 2,800 mm Overall width: approx. 2,500 mm Overall height: approx. 2,200 mm Weight: approx. 4,500 kg Electrical connection data Operating voltage: 380 VAC / 50 Hz Rated current: 100 A Connected power: 38 kW Condition & Inspection The NOMOCO VSRS-280 CNC 4 is currently in operation. The overall condition is considered to be very good for its year of manufacture. An on-site inspection and functional test are possible after prior appointment. Availability: immediately If you are interested, have technical questions, or would like further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, color channels: 4, Approx. 86 million impressions CX version nonstop feeder straight print 4+0 SAPC auto plate auto wash auto register Ibsdpfxoyr N D Uo Aiyjb KBA RapidDry Coating Grafix powder In production Available immediately

Condition: ready for operation (used), Year of construction: 2008, Flat pile feeder, 4 pockets , 2 knives, BCUH 56 delivery, pump machine is equipped with new rollers Iedpfx Asz Aahqjiyobb

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 16/31.5 rpm -Power: 0.9/1.5 kW -Construction: B3 -Diameter shaft: 50 mm -Protection class: IP 44 Ibjdpfx Aiociq Dxoyob -Brake -external fan -Dimensions: 750/300/H360 mm -Weight: 78 kg

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER - Microbox device - Servo motors on the feeder and stacker - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section - Third carrier in PF1 and PF2 - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout Ibsdpfxjzlqzgj Aiyeb - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Air-assisted folding system for crash-lock bottoms - Safety pull-cords - ERO cold glue system (3 guns + side glue wheel with reservoir)

Condition: good (used), Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMR 132. M4 -Power: 11 kW -Speed: 1440 rpm -Voltage: 380 V -Shaft: Ø 38/80 mm -Design: B5 -Protection rating: IP44 -Number: 2x motors available -Price: per piece Ibjdpjia Rp Njfx Aiyeb -Dimensions: 525/288/H330 mm -Weight: 88 kg/unit

Condition: used, machine/vehicle number: IDC000242, total length: 4,000 mm, total width: 1,000 mm, power: 4 kW (5.44 HP), Vibro conveyor with screen Ibedpezi Rubefx Aiyjb Lenght: 4 m Width: 1 m Electric motor: 4 kW Screen eye: 3×5 cm

Condition: ready for operation (used), SEW Eurodrive MCF40A0040-5A3-4-00 inverter SN: 102121 + MDX60A0040-5A3-4-00 power unit SN: 0173076, professionally fully overhauled and tested with 12 months warranty, 100% functional. Delivery as per the photos. Agreed sales discounts do not apply to this item. Please inquire about the price separately! Ibsdpfsx Euhgox Aiyeb

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Omega 130 folder-gluer - 4- 6- corner - ALLPRO 130 (2016 model) Iedpjzlqwzefx Aiyobb - Camera at the feeder to monitor the entry to the delivery section - Vacuum feeder - Servo-driven feeder - Left and right side-register sections - Remote control - Motorized transport belts - Motorized upper carriers for heavy materials - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Safety pull-cords - LAMBERTONI hot-melt gluing system (2 guns) + side disc with cold glue pot - Option to install a ZATOR cold-glue system (4 guns) without pump and encoder

Condition: used, Year of construction: 2021, power: 4.9 kW (6.66 HP), cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 250 mm, actuation type: manual, rotational speed (max.): 5,300 rpm, Equipment: CE marking, saw blade guard, Format4 Kappa V60 vertical panel saw by Felder, purchased on May 26, 2021, for precise cutting of panel materials in the woodworking shop. Suitable for large-format wood, wood-based materials, and coated panels with minimal space requirements. Key technical data: - Cutting depth: Maximum 60 mm - Cutting height: 2200 mm vertically - Cutting length: 5300 mm - Motor power: approx. 4.9 kW - Saw blade: Ø 250 mm at 5300 rpm - Dust extraction: 2x 100 mm connections Ibsdozulpqspfx Aiysb - Weight: approx. 910 kg, depending on the model - Vertical design for space-saving cutting of large panels - Precise horizontal and vertical cuts for panel materials - Particularly interesting for carpentry shops, makerspaces, training workshops, and companies with regular panel cutting needs No warranty

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Short-term availability – THE OPPORTUNITY! We are offering our well-maintained and fully operational chalet machine from the renowned Swiss manufacturer KRÜSI for sale. As we are switching to another model, you now have the chance to acquire this flawless machine. It is still in use, so functional testing and trial runs are welcome at any time. Dismantling and collection by buyer Assembly in consultation with Krüsi recommended Machine year: 2018, in operation since 2019 Total length with tables approx. 35.5 m Available from 08/2026 Machine details: - 4 milling units, each 4 kW, spindle drive via toothed belt - Maximum working range: 250 mm construction height and 245 mm wall thickness - 6 frequency converters for soft start and motor braking - Automatic work cycle and pneumatic workpiece clamping - Siko position indicators on adjustment spindles for horizontal operation - Pneumatic under-table crosscut saw, left, 5.5 kW with frequency converter - Hand-operated drilling unit 1.8 kW, mounted on the right column - Hydropneumatic feed for drilling unit - Additional pneumatic vertical clamping cylinder with bracket - Additional pneumatic horizontal clamping cylinder with bracket - Auxiliary table for milling unit with additional vertical clamping cylinder - Stop rail 0.5 m, mounted at the front left of the machine frame - Stop rail 0.5 m, mounted at the front right of the machine frame - Auxiliary table for short workpieces - Steel chip funnel for pit extraction - Dovetail and end-groove milling machine (with pneumatic rotary axis) Milling and drilling tools: For horizontal milling units: - WPL rabbet cutter Ø 180 mm, adjustable range 61-240 mm x 40 mm, Z=2 For vertical milling units: - WPL rabbet cutter Ø 230 mm, adjustable range 61-240 mm x 40 mm, Z=2 - WPL rabbet cutter Ø 270 mm, adjustable range 61-240 mm x 40 mm, Z=2 For drilling unit: - Drill Ø 20 mm, with long centering tip - Drill Ø 30 mm, with long centering tip For 90° swiveling dovetail and end-groove milling machine: - WS rabbet cutter Ø 230 mm, bottom Ø 40 mm, width 40 mm - WS dovetail cutter 20°, 92 x 36.5 x IG M 24 left, Z3, V3, F3 with chip-breaker grooves, MK 863-1 - WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3 with chip-breaker grooves, MK 863-2 - Clamping wrench for above dovetail cutters Accessories: Horizontal above: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 30 mm, bore Ø 40, Z2 - Center part alu Ø 270 mm, width 50 mm, bore Ø 40, Z2 Ibjdpfx Aey Ri Huoiyeb Horizontal below: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 40 mm, bore Ø 40, Z2 Vertical front: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 40 mm, bore Ø 40, Z2 Vertical rear: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 30 mm, bore Ø 40, Z2 - Safety guard for horizontal above with holder (for cutter Ø 270 mm) - Safety guard for vertical rear with holder (for cutter Ø 180 mm)

Condition: good (used), Year of construction: 2002, functionality: fully functional, stack height: 165 mm, overall weight: 530 kg, cutting width (max.): 1,135 mm, compressed air connection: 8 bar, insertion depth: 950 mm, Equipment: documentation/manual, Can be coated with an air spreader roller, one or two times Iedpfx Aiezzd Ixoyjbb Chrome-plated air table Right/left vibration option Tilt adjustment Adjustable vibration speed Table size: 950 mm x 1,135 mm Layer height, min.: 30 mm Layer height, max.: 165 mm Table height: 860 - 950 mm

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3075419, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, swing diameter over cross slide: 635 mm, turning diameter over bed slide: 1,016 mm, For sale is a HAAS SL-40HE CNC turning center, manufactured in 2006, in a High-Center configuration with a full C-axis and driven tools. This robust CNC turning machine is suitable for demanding turning and milling operations. TECHNICAL DETAILS Travel in X-axis: 432 mm Travel in Z-axis: 1,118 mm Spindle speed max.: 2,400 rpm Swinging diameter over bed: 1,016 mm Swinging diameter over cross slide: 635 mm Bar capacity max.: 101.6 mm C-axis: full C-axis Spindle power: 29.8 kW / 40 hp Spindle nose: A2-8 Spindle bore: approx. 116.8 mm Gearbox: 2-speed Turret capacity: 10 stations Driven tools: yes Ibjdpozy Npfsfx Aiyjb MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 5,500 x 2,300 x 2,300 mm Machine weight approx.: 11,000 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor Ibjdpfsdwkx Djx Aiyob -Speed: 63 rpm -Power: 0.8 kW -Construction: B3 -Shaft: Ø 38 x 80 mm -Protection class: IP 44 -Dimensions: 450/250/H280 mm -Weight: 36 kg

Condition: used, Year of construction: 2001, machine/vehicle number: 0-34-07-5949, functionality: fully functional, input voltage: 24 V, input current: 48 A, input frequency: 50 Hz, cutting height (max.): 320 mm, cutting width (max.): 60 mm, We offer this used HOMAG Optimat chf 41 circular table saw, year of construction 2002. Manufacturer: HOMAG Model: Optimat chf 41 Construction year: 2002 year Condition: used Ibodpfx Aszq Hwhjiyjb Category ID: 2094 Type ID: 1612 Machine type: circular table saw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), functionality: fully functional, DALEX PMS 10-4 powerful and robust industrial spot welding machine, supplied as a ready-to-use set with a matching COHLINE water cooling unit. Highlights & Condition Extremely low operating hours: The installed digital DALEX MPS 100 controller shows an original counter reading of only 13,282 cycles. For an industrial machine of this class, this indicates exceptionally low use and minimal wear. High electrode force: This model provides a powerful electrode force of up to 690 daN, enabling reliable welding points even on thicker sheet metal. Cooling unit included: Thanks to the powerful COHLINE cooling unit with 5.8 kW cooling capacity, the machine is suitable for continuous industrial operation without overheating. Flexibility & Safety: Equipped with a key switch for easy selection between operation via foot switch or two-hand safety control panel. Technical Data at a Glance DALEX PMS 10-4 Spot Welding Machine Maximum welding power: 294 kVA Rated power (50% duty cycle): 80 kVA Maximum short-circuit current: 51.7 kA Supply voltage: 400 V / 50 Hz No-load voltage: 3.5 to 7 V Electrode force: 115 to 690 daN Controller: DALEX MPS 100 with digital display Machine weight: approx. 465 kg COHLINE WRK 245-53 Cooling Unit – Year 2000 Rated cooling capacity: 5.8 kW at 32°C ambient / 15°C water temperature Refrigerant: R407C, 4.0 kg Supply voltage: 400 V / 50 Hz Ibedpfxjzz H Eys Aiysb Fuse protection / Current consumption: 16 A / 9.0 A Operating cycles: 13,282 cycles Everything from a single source: We will be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!