Used Vertical Glass Drilling Machine, 1300 Mm for sale (99,853)

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Fsdsx Iikbspfx Ag Asph Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: used, Year of construction: 2004, bore capacity in steel (diameter) 50 mm arm length 1.600 mm workpiece height max. 1.200 mm distance spindle/base plate 320 - 1.220 mm spindle taper MT 5 quill stroke 315 mm throat min. 350 mm throat max. 1.600 mm quill feed 0,04 - 3,20 mm/U drive capacity - spindle motor 4,0 kW spindle turning speed range 25 - 2.000 U/min Fpedpfx Agezcqyfs Ajh column diameter 350 mm voltage 400 V total power requirement 6,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,45 x 1,00 x 2,65 m - Serial-No.: 4045935 - Clamping cube 630 x 500 x 500 mm - Coolant pump

Condition: ready for operation (used), Year of construction: 2021, - USED - 3-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE       X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 2000 mm Z-AXIS TRAVEL: 1000 mm DISTANCE SPINDLE NOSE-TABLE: 350 - 1350 mm RAPID FEEDS X-Y-Z: 20 - 18 - 16 m/min SPINDLE: 6000 rpm; 30 kW; ISO 50 - DIN TABLE SIZE: 3000 x 1800 mm MAX ADMITTED LOAD: 10000 Kg HIGH PRESSURE COOLANT: 25 Bar TOOL MAGAZINE: CHAIN-TYPE ; 60 POS MAX TOOL DIAMETER: 125 mm MAX TOOL WEIGHT: 20 Kg CONTROL UNIT: HEIDENHAIN TNC 640 WEIGHT: 32706 Kg ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; MAGNETIC FILTER ; TOOL SETTER ; LINEAR SCALES ; TOUCH PROBE ; Fpsdpfxezbnrio Ag Ajh PORTABLE HANDWHEEL

Condition: ready for operation (used), Year of construction: 2000, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1250 mm Fedpfxjyvlxko Ag Ajph Y-AXIS TRAVEL: 700 mm Z-AXIS TRAVEL: 750 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 850 mm RAPID FEEDS X-Y-Z: 15 m/min SPINDLE: 4000 rpm; 26 kW; ISO 50 - DIN PALLET: N.2 TABLE SIZE: 650 x 1400 mm MAX ADMITTED LOAD: 1500 Kg HIGH PRESSURE COOLANT: 30 Bar TOOL MAGAZINE: CHAIN-TYPE ; 41 POS MAX TOOL DIAMETER: 120 (200) mm MAX TOOL LENGHT: 400 mm MAX TOOL WEIGHT: 20 Kg CONTROL UNIT: FANUC 16i-M WEIGHT: 16750 Kg OVERALL DIMENSIONS: 7135 x 5300 x 3426 mm ACCESSORIES: SWARF CONVEYOR ; GEAR BOX

Condition: good (used), Year of construction: 2008, operating hours: 11,870 h, functionality: fully functional, Controller WINMAX DSM Double screen Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm A axis -35/+110 degree C axis 0 - 360 degree Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories, features - KITAGAWA TT251 nc round table - Coolant through spindle 20 bar - Coolant unit - Spindle cooler - Chip conveyor - SW options: 3D, DXF, pocket islands, rigid tapping, NCPP, ISNC, realistic graphics, material and tool databank, surface selection, - machine mounths - external hydraulics The machine is still under power and can be inspected in operation. Fsdpey U Hvhofx Ag Asph

Condition: used, Year of construction: 2017, functionality: fully functional, SCHIATTI FPS SME 8 – Year 2017 STRAIGHT GRINDING MACHINE, 8 Wheels Minimum workable size: 80 x 80 mm Thickness: 3–30 mm Speed: 0.5 – 5.5 m/min Power: 14 kW Variable angle: 0–45° 180,000 linear meters processed Fedezbrkiepfx Ag Aeph

Condition: used, functionality: fully functional, FOREL Insulating Glass Line - Washing Machine (6 brushes, Low-E) FOREL VW2500 (2009) Max Height: 2500 mm Min. Dimensions: 310x160 mm Thickness: 3-40 mm - Scanner LISEC (2014) - Gas Press FOREL APG 250 (2009) Max. Dimensions: 2500x4500 mm Fodpfx Agjy If Ays Aoph Min. Dimensions: 190x320 mm Max Manual Opening: 69 mm Working Direction: Right to Left

Condition: used, Year of construction: 2003, Technical details: Fpjdpfx Agezcnq Ie Ash weight of the machine ca.: 9,5 t

Condition: used, Display unit Condition: Like new Fodpfx Agoyamc Ds Aoph Included in delivery: Equipment case Device Operating instructions Bit This item is an unused display unit.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Fodew Rhk Repfx Ag Aoph Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: used, Display unit Condition: Like new Included in delivery: Fjdpfxov Ntb Ij Ag Aeph Equipment case Device Operating instructions Bit This item is an unused display unit.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOLZ-HER Evolution 7405 Connect Manufacturer: HOLZ-HER Model: Evolution 7405 Connect Machine type: CNC woodworking / vertical CNC machining center Year of manufacture: 2022 Serial number: XXXX Control system: HOLZ-HER Software: Campus V7-EVO Operating voltage: 400 V / 50–60 Hz Power consumption: 10.3 kW Fpsdszcm Ufspfx Ag Ash Enclosure: enclosed cabin Color: gray Number of previous owners: 1 Spindle / Milling unit Spindle speed: 1,000 – 24,000 rpm Tool interface: HSK-F 63 Tool magazine: 6 positions Milling unit: Type 7830 Max. tool diameter: 110 mm XL drilling unit: 1.7 kW Drilling unit: 19 spindles Angle gearbox: 7869 Working area / Workpiece data Max. processing dimensions: 3,200 x 1,190 x 70 mm Min. processing dimensions: 200 x 70 x 8 mm X-axis max.: 3,200 mm Y-axis max.: 920 mm Max. workpiece weight: 75 kg Machine data Machine weight: approx. 2,000 kg Overall dimensions L x W x H: 3,800 x 1,800 x 2,500 mm Equipment Campus V7-EVO software Campus Standard macro package Handheld device for remote control of the machine 21.5" flat screen Keyboard with cable 2D barcode scanner Laser workpiece length measurement Milling unit 7830 with 6-position magazine XL drilling unit 1.7 kW with 19 spindles Angle gearbox 7869 Workpiece support with infeed table Vacuum system ECO Automatic central lubrication Air conditioning unit for switch cabinet cooling Enclosed safety cabin Comments on condition: Machine was not connected during inspection in May Test run therefore not currently carried out Spindle test run not currently carried out Operating hours could not be read due to power outage Machine is dirty, cleaning recommended Maintenance / safety inspection without proof, performance recommended Equipment, tools and accessories are in the processing area, the processing area could not be opened due to power outage Functional test and test run recommended before commissioning Check software for updates and currency Machine documents / purchase invoice were available in copy The machine can be connected and tested by Montrasio Werkzeugmaschinen GmbH.

Condition: repair required (used), Year of construction: 2006, operating hours: 500 h, functionality: not functional, Control unit: SIEMENS Sinumerik 840D Table clamping surface: 650 x 410 mm Max. table load: 250 kg T-slots: 3x 14 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 410 mm Spindle speed range: max. 12,000 rpm Spindle drive power: 12 / 18 kW Tool magazine capacity: 24 positions Fjdpfxoy U Hw Ej Ag Aeph Max. tool diameter: 77 mm Max. tool diameter (with vacant adjacent slots): 125 mm Max. tool length: 200 mm Max. tool weight: 5.0 kg Tool change time: approx. 1.3 sec Rapid traverse (X / Y / Z): 48 m/min Total power requirement: approx. 30 kW Machine weight: approx. 4.0 tons Required floor space: approx. 3000 x 2000 x 2500 mm Equipment and Accessories: - NC rotary table (2-axis) - Coolant system - Spindle chiller - Machine feet Status Note:The machine is located in a technical vocational school and due to very infrequent use, the backup batteries have drained. These need to be replaced and the parameters must be reloaded.

Condition: good (used), Year of construction: 2007, operating hours: 34,000 h, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,500 mm, total length: 3,500 mm, total width: 2,400 mm, overall weight: 4,700 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, Control system: Ultimax 4 Distance from spindle center to table: 150 - 760 mm Fpjdpozcu R Usfx Ag Aeh Drive power – main spindle: 7.5 kW Tool holder: SK 40 Table clamping area: 760 x 510 mm Max. table load: 700 kg Tool changer with 24 stations

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Fedpfx Aex A Hbkeg Asph Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 35 Total number of tool changer positions: 26

Condition: good (used), Year of construction: 1995, operating hours: 28,099 h, functionality: fully functional, machine/vehicle number: 662280, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: DECKEL MAHO, controller model: CNC 425, total height: 2,000 mm, total length: 3,000 mm, total width: 2,400 mm, table width: 480 mm, table length: 900 mm, overall weight: 2,000 kg, number of slots in tool magazine: 16, mount diameter: 40 mm, input voltage: 400 V, power: 20 kW (27.19 HP), input frequency: 50 Hz, input current: 50 A, DECKEL MAHO MH 600 W CNC Vertical Machining Center - Tool holder: SK 40 - Table with 7 T-slots - Incl. rotary table from WALTER, type: TANIP125NEG, year of manufacture: 2010 Fpsdpfxsy I Tgyo Ag Ash Attention: The item must be collected between August 24 and August 27, 2026, on a date to be agreed upon. FCA D-61352 Bad Homburg - loaded onto a truck.

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 32 mm throat 285 mm Fpodpfx Aszcqzcsg Ash bore stroke 160 mm turning speeds 55 - 1450 U/min taper MK 3 table-size 500 x 370 mm feed 0,1-0,2-0,3 m/min total power requirement 1,6 kW weight 400 kg dimensions 1000 x 700 x 1850 mm Features: - Automatic feed - Coolant system - Continuously variable speed control - Adjustable depth stop - Drill chuck

Condition: new, bore capacity in steel (diameter) 28.0 mm throat 320 mm bore stroke 150 mm morse taper 3 MK table: 500 x 350 mm turning speeds 75.0 - 3010 U/min total power requirement 1.35 / 1.70 kW weight 290 kg range L-W-H 600 x 700 x 1900 mm Description: - Standard with automatic quill feed (0.04 - 0.3 mm / rev) - Helical gear for optimal power transmission Fpedpfx Aexaba Ajg Ajh - High efficiency and smooth running thanks to helical gears - in combination steel against reinforced fiber material - Automatic quill feed - is deactivated when the set drilling depth is reached - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Stable and polished steel column, designed for heavy use - Quality ball bearings ensure high concentricity - 8 switchable speeds through powerful 2-stage drive motor - Adjustable drilling depth stop with mm scale Scope of delivery: - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 50 mm, drilling depth: 250 mm, height adjustment type: mechanical, actuation type: electric, rotational speed (max.): 1,400 rpm, rotational speed (min.): 31 rpm, total width: 800 mm, total length: 1,100 mm, total height: 2,400 mm, throat depth: 335 mm, table width: 480 mm, table length: 560 mm, overall weight: 1,270 kg, Equipment: CE marking, documentation/manual, # Column Drilling Machine MTP Z5150B – New ## Description Fpodjzcn A Dopfx Ag Ajh The MTP Z5150B column drilling machine is a professional industrial machine designed for drilling, reaming, countersinking and tapping operations in steel, cast iron, aluminum, brass, bronze and other metals. Its heavy-duty cast iron construction and machine weight of 1270 kg ensure excellent rigidity, stability and machining accuracy, even when working with large-diameter tools. The machine is equipped with a mechanical gearbox offering 12 spindle speeds and automatic spindle feeds, allowing the operator to select the optimal cutting parameters for various materials and tooling applications. The tapping function and integrated coolant system further enhance productivity and versatility. With a spindle speed range from 31.5 to 1400 rpm, the MTP Z5150B is suitable for both heavy-duty drilling operations and precision machining tasks. The large T-slot worktable provides secure and convenient workpiece clamping, while the robust column design minimizes vibration during operation. The machine is CE compliant and supplied with technical documentation and an operating manual. ## Standard Equipment * Mechanical gearbox * Automatic spindle feeds * Tapping function * Integrated coolant system * Adjustable worktable * Safety guard * Emergency stop switch * Technical documentation * CE Declaration of Conformity ## Technical Specifications * Model: MTP Z5150B * Machine type: Column drilling machine * Maximum drilling capacity: 50 mm * Spindle taper: MT5 * Quill travel: 250 mm * Motor power: 3 kW * Power supply: 400 V * Frequency: 50 Hz * Electrical phase: 3-phase * Spindle speed range: 31.5 – 1400 rpm * Number of spindle speeds: 12 * Automatic feed range: 0.056 – 1.80 mm/rev * Throat depth: 335 mm * Table size: 560 × 480 mm * Machine weight: 1270 kg * CE Marking: Yes * Documentation available: Yes * Condition: New * Year of manufacture: 2025 ## Suitable Materials The machine is designed for machining: * Structural steel * Tool steel * Cast iron * Aluminum * Brass * Bronze * Engineering plastics Recommended cutting speeds displayed on the machine help operators quickly select appropriate drilling and tapping parameters for different materials, ensuring efficient machining and extended tool life. ## Additional Information The MTP Z5150B is an excellent choice for metalworking workshops, maintenance departments, tool rooms, fabrication shops and industrial production facilities. Its powerful 3 kW motor, wide spindle speed range and tapping capability make it a versatile solution for daily machining operations. The machine is available from stock and ready for immediate dispatch. Transportation can be arranged throughout Europe upon request.

Condition: excellent (used), Catalogue number 7787 TECHNICAL SPECIFICATIONS - Tool diameter: 14mm - Maximum drilling depth: 170mm - Maximum milling length: 180mm - Adjustment of drilling apparatus front/rear - Table adjustment up/down and sideways - Table swivel angle: +/-20˚ - Working table dimensions: 620x280mm - Material clamping - Motor power: 1.5kW - Brake - Dimensions (L/W/H): 1070x660x1250mm - Weight: 300kg ADVANTAGES – Polish production – Very good condition – Used drilling machine Net price: 5900 PLN Net price: 1400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR Fpsdpfx Ajzabakjg Ash (In the case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Fedeyugvajpfx Ag Ajph Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor - Coolant unit - Manuals The machine is no more in production but still under power and will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: not inspected (used), Year of construction: 1996, bore capacity in steel (diameter) 32 mm morse taper MK 4 Fpsdpfxszb Raio Ag Aeh base plate 1700 x 700 mm feed 4 m/min weight of the machine ca. 1,5 t dimensions of the machine ca. 1800 x x1200 x 2480 m

Condition: excellent (used), Working travels 860 x 560 x 600 mm Fsdpfoq Dlciex Ag Aoph Table size 910 x 500 mm Spindle taper SK40 Spindle speeds -10000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 with dividing head Coolant through spindle MARCELS MASCHINEN CH

Condition: used, RADIAL CSEPEL TYPE: RF50/1600 TYPE: RF50/1250 20 AVAILABLE PIECES Fedpfxsriu Eys Ag Asph

Condition: good (used), Year of construction: 1990, power: 3 kW (4.08 HP), rotational speed (max.): 1,280 rpm, total width: 2,000 mm, total length: 2,000 mm, total height: 2,300 mm, table width: 400 mm, table length: 1,200 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Max. tap Ø: 40M Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Fodpjzcnnajfx Ag Aeph Table Width: 400mm Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!