Used Wohlenberg Pt1 1070 for sale (441)

Condition: used, axle configuration: 2 axles, first registration: 07/2026, Year of construction: 2026, Equipment: ABS, ZWF/W 18 Center Tube, Central Axle Lift Trailer, Tire Size 22.5, Single Dimensions Chassis designed for interchangeable bodies from 7150 to max. mm (symmetrical bodies) Chassis designed for rear-flush mm (with impact buffer) Test lowering heights: ZWF: Vehicle must lower at least +70mm and raise -20mm, WF: +60mm/-20mm, WFS: +60mm/-20mm Axle loads: 18,000 kg (2 x 9,000 kg) Spring center approx. 1300 mm Support load approx. 1000 kg Lowering heights approx. 1120 to max. 1320 mm via air suspension of the trailer and the tractor unit Coupling height (low coupling) approx. 400 mm unladen Ride height unladen approx. 1100 mm 2nd ride height, if axle lift is used, is approx. 40 mm higher (tire lift via axle lift increases the ride height), only if necessary Ground clearance approx. 1070 mm on level ground Chassis No. generally stamped on the side of the longitudinal member, right side, approx. 100 mm from the front E-wheel holder Prepared for E-wheel holder in winch design for 1 E-wheel Front stop, foldable and adjustable for 7150 mm symmetrical interchangeable bodies Support winches 1 set of drop-leg supports at the rear, height-adjustable 1 set of support winches at the front Coupling device Coupling spring travel approx. 1400 mm Intermediate distance 760 mm (with mm interchangeable body) Connection lines for lights/brakes, route lines inside/on the drawbar on the right Storage for connection lines on the side of the drawbar Drawbar rigid (center tube) with bolted drawbar eye Drawbar eye ø 50 mm SMB axle with Haldex/Wabco/Knorr brake and Weweler air suspension selected 2x axle with large disc brake (430, or 4309/4312/4345) 2x axle 9t 22.5 disc brake, single tires for air suspension Bellows plates, rotate at 340-400 lift (not on the bogie, not with SMB) Lifting and lowering device with 1 rotary slide valve Knorr/Wabco Tsdpfxozir Ipj Aahoc Axle distance approx. 1360 mm (with total lift of approx. 300 mm, 340 mm or 400 mm) 2x air suspension, total lift approx. 400 mm 1 coupling head each, red and yellow Test nipple for brake cylinder pressure on the brake cylinder at the front right Air reservoir 2 x approx. 80 l in steel, painted black (1x brakes, 1x lifting and lowering) Lifting and lowering device at the rear left in the direction of travel Tire pressure control, basic version, connected to the CAN bus system of the EBS Brake/ABS EBS brake system, manufacturer Knorr/Wabco/Haldex at our choice, with Roll Stability Program 2x wheel attachment by center centering 4x tires 385/55 R 22.5 instead of 385/65 22.5, brand manufacturer at choice, system on -wheel 11.75 x 22.5 Brand tires 385/55 R 22.5 at choice Spiralflex Spiralflex cables and hoses for light and brake connection to the tractor unit, with mounting plate (standard) 15-pole plug or socket at the front Lighting system 24 Volt with large multi-function lamp Lighting system/wiring system, manufacturer at our choice (closed lighting system) License plate lighting Rear lights (LED) under the rear container support, beam of light to the rear Rear lights (LED) at the very front, under the stop, beam of light to the rear Side marker lights (LED), flashing (all SIDE lights flash), attention! Possible problems with tractor units! 9 (min.)-pole cable as connection front-rear (min.) Position lights (LED) mounted on a separate holder (not attached to the lamp) Position of position lights: Mounted on the underrun protection (if there is a kink to the rear, the UFS will not be pinched) Position light (LED) at the

Condition: used, mileage: 7,83,100 km, power: 353 kW (479.95 HP), first registration: 06/2010, fuel type: diesel, empty load weight: 13,950 kg, maximum load weight: 12,050 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,900 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, MAN TGX 26.480 6x2-2 semi-trailer tractor unit with crane First registration: [Date] with mileage of 100 km (documented) Long-haul driver's cab with 2 beds ZF automatic transmission Retarder Air conditioning, auxiliary heater Leaf/air suspension 3rd axle can be lifted Adjustable fifth wheel Tires 385/65 R22.5, tread depth approx. 60% Tires 315/80 R22.5, tread depth approx. 60% Wheelbase 3900mm Unladen weight 13,950 kg Crane: Palfinger PK 27002 Performance Year of manufacture: [Date] Radio remote control 4-point support 7 telescopic extensions in total, 6x hydraulic and 1x mechanical Tsdozi S I Njpfx Aahoc Max. lifting capacity: 6700 kg At 4.60m: 5200 kg At 6.00m: 3760 kg At 7.90m: 2660 kg At 10.10m: 1950 kg At 12.20m: 1520 kg At 14.40m: 1250 kg At 16.70m: 1070 kg At 18.80m: 890 kg (mechanical extension) Hook height approx. 22.50 meters German vehicle in good condition. MOT (TÜV) valid until May 2027 Export/net price: 55,900 Euro All information is without guarantee, errors and omissions excepted.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 500 kg, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Tsdpfxov Sd S Ns Aahec Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate oil cooler Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, laser type: fiber laser, laser source manufacturer: Raycus, laser power: 6,000 W, laser wavelength: 1,070 nm, working length: 1,500 mm, working width: 3,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, total length: 2,610 mm, total width: 5,125 mm, total height: 2,128 mm, Equipment: CE marking, The WatMachinery ZMB1530 6kW is a heavy-duty fiber laser cutting machine from the ZMB series, engineered for fast, precise, and reliable sheet metal processing. This model is fitted with a Raycus 6kW fiber laser source and offers a cutting area of 3000 x 1500 mm, making it an optimal solution for workshops and industrial production lines working with steel, stainless steel, aluminum, brass, and other metals. The machine is equipped with a Raytools BS06K auto-focus cutting head, Delta / INOVANCE servo drives, Taiwan-made rack transmission, HIWIN / DTX linear guideways, a French Motovario gearbox, and the Cypcut control system. Its robust construction includes a reinforced machine frame, enclosed safety cabin, automatic lubrication system, industrial control cabinet, integrated smoke extraction, and an industrial-grade PC. Each component has been selected to ensure high positioning accuracy, stable drive transmission, and reliable long-term operation. The ZMB1530 is designed for continuous industrial duty with a 24-hour operating mode, travel speed of 80 m/min on the X and Y axes, and a maximum acceleration of 0.8G. The control system supports multiple file formats, remote operation, and real-time alarms and safety interlocks. An industrial water cooling system guarantees stable performance of the laser source and protects the machine during extended production cycles. As indicated in the material and cutting charts in the product brochure, the machine efficiently processes carbon steel, stainless steel, aluminum, and brass. The ZMB series is ideally suited for industries such as sheet metal fabrication, electrical cabinet manufacturing, automotive component production, general machinery, signage, metal product manufacturing, tooling, and many more sectors. Key Advantages: - 3000 x 1500 mm working area - Raycus 6kW fiber laser source - Raytools BS06K auto-focus cutting head - Cypcut control system - Delta / INOVANCE servo motors and drives - HIWIN / DTX linear guideways - Taiwan YYC rack transmission - French Motovario gearbox - Industrial water chiller - Fully enclosed protective cabin - Automatic lubrication system - Industrial PC with integrated vision system - Designed for 24/7 industrial operation Technical Specifications: Model: ZMB1530 / ZM-Series Laser Source: Raycus Fiber Laser Laser Power: 6 kW Working Area: 3000 x 1500 mm Wavelength: 1070–1080 nm Interfaces: USB, RJ45 X-Axis Travel: 3000 mm Y-Axis Travel: 1500 mm Z-Axis Travel: 100 mm Traverse Speed (X/Y): 80 m/min Positioning Accuracy: ±0.05 mm/m Repeatability: 0.05 mm Maximum Acceleration: 0.8G Power Supply: 380V / 50Hz Operating Mode: 24/7 Machine Weight: 3150 kg Machine Dimensions: 5125 x 2610 x 2128 mm Main Components: * Raycus laser source * Raytools cutting head * WatMachinery machine bed and gantry * Taiwan YYC rack * France Motovario gearbox * Delta / INOVANCE servo drives (X, Y, Z axes) * HIWIN / DTX linear guideways * Cypcut control system * HanLi industrial water chiller * CHNT / Schneider electrical components * CKD / SMC pneumatic components * Integrated smoke extraction system * Automatic lubrication system * HP industrial PC * Enclosed safety cabin Application Areas Suitable for: * Sheet metal fabrication * Electrical cabinet production * Advertising and signage * Mechanical parts manufacturing * Kitchen equipment production * Automotive industry * General machinery industry * Metal product manufacturing * Tooling and measurement component production Tsdpfsyr D Nxox Aahsc Pro

Condition: used, -External dimensions: 2600x2900x2110mm -Internal dimensions: 2400x2700x1950mm -Wall thickness: 80 mm -Temperature: -2+8 ºC / -18-23 ºC Tedex Eyhfopfx Aahec -Refrigerant: R452A -Climate class: 5 -Pre-assembled refrigeration unit on the panel -Automatic condensate water evaporation -Internal lighting -Panel finish in pre-painted sheet metal, specially designed for food use, light grey colour -300mm gaps with panels of 300, 600, 900 and 1200mm -Panel interlocking system with double-latch hooks -Rounded doors and interior corners cut at 45º -Ergonomic handle with lock and safety release system -Pressure balance valve -Stainless steel floor with non-slip surface -Reversible door, self-locking at 90º, available in 2 sizes, with clear opening of 600 and 700mm -Hinges with sloped system -Insulation in CFC-free polyurethane, high-pressure injected, with density 41 Kg/m³

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,230 kg, maximum load weight: 14,770 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 870 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, *Wechel Central-Axle Trailer Chassis Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear Locks height-adjustable by approx. 120 mm for parking height 1070 mm, lifting height then approx. 1150 mm, and driving height then approx. 990 mm; foldable with center supports. Includes guide rollers that can be inserted into center supports (locking mechanism from the Vario chassis at the rear) 4 container locks with sturdy arms on a 20" base for swap bodies 7.15 / 7.45 and 7.82 1 pair of front transmission support legs, with straight lower section and single-sided operation on the right rear Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection Half-shell fenders 1 spare wheel holder for 1 electric bike, with wheel mounting kit 1 plastic toolbox, with insert shelf, W=620/H=360/D=440 mm, lockable with a padlock. (Lock not included) *Towing equipment for central-axle trailer Towing beam with certified 50 mm tow eye, freight transport version (not suitable for trucks with tail lifts; detailed verification may still be required when placing an order) Towing beam lower coupler, free towing beam length approx. 2200 mm Folding bracket with spring support on the towing beam, for routing the connection cables to the truck *Axles + Suspension Todpfx Aaezd Uyqohoc SAF drum brake axles “Laser-aligned axles/chassis” Reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the motor vehicle, connection at FR-right EBS, Electronic Brake System with EBS connector at the front, with connecting cable, connection at FR-right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability System *Wheels and Tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection at the rear right 2 additional LED work lights at the rear, activated via the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Operating Instructions The specified total weight is technically possible; however, depending on the cargo, the total weight may not be reached while complying with the permissible axle, support, and fifth-wheel loads. (Poor handling and tracking may result from improper load distribution) *Country of Registration/License Plates Germany With DEKRA approval and certification (in accordance with §13 EG-FGV) 24/7 Service Hotline Prepared for single-line license plate holders Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint Finish Frame Hot-dip galvanized or painted according to customer specifications

Condition: excellent (used), vertical band saw Make Heska type ES 5 throat 500 mm maximum cutting height 310/270 mm table size 600 x 600 mm Table can be tilted Band welder IDEAL type BS=-16 Saw band speed infinitely variable width 1070 mm Depth 800 mm Height 1960 mm with pallet Tsdpfx Aetr Emmjahjc Weight 360 kg

Condition: like new (used), Year of construction: 2003, x-travel 850 mm Todpfoz Ebraex Aahjc y-travel 700 mm z-travel 500 mm Control Heidenhain iTNC 530 tool taper HSK 63 voltage 400 V control voltage 24 V weight of the machine ca. 10,5 t - Current configuration C 40 U: o Vertical machining center o 4 axes o Travel ranges: X 850 mm, Y 700 mm, Z 500 mm o Table size: X 1070 mm, Y 700 mm o Carousel tool magazine, 40 positions o Max. tool length in magazine: 300 mm o Spindle: HSK63, 10,000 rpm, 25 kW, 159 Nm o Coolant system: AK, IKZ 40 bar, 1,000-liter capacity, steel filter o Blow-off air IK & AK o MMS system MHT o Scraper belt chip conveyor o Polycarbonate disc without Rotoclear o Heidenhain iTNC 530 machine control o Emulsion mist extraction (Preparation) o Installation dimensions with coolant system: 3,930 mm x 4,400 mm x 3,040 mm o Laser measurement system for tools, including breakage detection o 3D measuring probe o Spindle hours: 14,578 h o Machine hours: 47,069 h

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, power: 44 kW (59.82 HP), motor manufacturer: Toyota, gearing type: other, fork length: 1,070 mm, color: orange, Country of origin: Japan Displacement: 2,486cc Dimension: 2,930 x 1,240 x 2,170 (without the mast extension) Gearbox type: Power Shift Lights - Front Combination Lights & Rear Combination Lights Mirror - Rear View Mirror (Right & Left Sides) Height of Overhead Guard Yellow strobe light Led rear combination lights Headlights with front combination lights Seat belt Back up buzzer Rear pillar assit grip Rear view mirror right & left sides Radiator screen 2170 mm Led rear working light (selective lightning condition) System of active stability (SAS) Cycloen air cleaner (dual elements) Pre-cleaner Anti-restart ignition key switch Floor mat Tool standard set Spark guard net Operator Presence Sensing System (OPS) Neutral Safety Switch Rated Capacity: 3000 kg - MODEL - 62-8FD30 Load Centre: 500 mm Fuel Type: Diesel Steering: Power Steering Free Lift : 135/135MM - (Wo/ W- Load Backrest) Mast Type: 2 Stage Mast Mast Lowered Height: 2615mm Mast Extended Height: 4740 / 5220 mm - (WO/W Load Backrest) Carriage Type: Side Shift Carriage Fork Length: 1070 mm Tyres: Solid Levers: 4 Brake Type: Hydraulic Brake = More information = Number of cylinders: 4 Engine capacity: 2.486 cc Tjdpfsy Tykisx Aahoc Engine type: Toyota IDZ II Fuel tank: 60 litres Lowered mast height: 2615

Condition: used, Year of construction: 2023, ---- New equipment 3 units available in stock in Dresden Lissmac Mini Crane LMK 400 TFE Equipment No.: 100569137 Year of manufacture: 2023 Price: 15,930.00 EUR net Lissmac Mini Crane LMK 400 TFE Equipment No.: 100324496 Year of manufacture: 2021 Price: 15,285.00 EUR net Data: Load capacity with 5m jib: 400 kg Outreach: 5000 mm Hook height: 4500-6000 mm Tsdszkzqpopfx Aahsc Weight without ballast: 991 kg Ballast: 1070 kg Wheelbase: 2000/2000 mm Turning radius: 1500 mm Maximum wheel pressure: 14 kN Lifting speed: 2-8 m/min

Condition: used, Technical details: length: 1020 mm width: 810 mm height: 625 mm weight of the machine approx.: 1070 kg Drill cube material made of cast steel. Tsdpfx Ajv Dduneahsc Surface with strong drill inclusions. T-slots according to DIN 650 - Vertical clamping surface: LxD: 1020 x 625mm - Horizontal clamping surface: LxW: 1020 x 810mm *

Condition: excellent (used), Year of construction: 2023, operating hours: 73 h, machine/vehicle number: JPD1418523D0263, fuel type: electric, color: other, Year of manufacture: 2023 Drive: Wheel GVW: 5.150 kg Dimensions (LxBxH): 384 x 176 x 197 cm Todpfx Aaoxxhu Rohjc Lifting capacity: 363 kg Working height: 1.430 cm CE mark: yes Dingli JCPT1418DC Year of construction: 2023 Hours: 73 hours Working height: 14.3 m Platform height: 12.3 m Weight: 5150 kg Engine: Electric Lifting capacity: 363 kg Drive: 4x2 CE certified Price excludes VAT

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Folding Belt GF 1360-750-600 RA1829 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1270x1180 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S1 Deflection roller (UR): Ø = 42 mm Drive drum (AT): Ø = 64 mm Belt: Type XVT-2128 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Tsdpfx Aaek Abgvshoc For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Transport trolley Mesh trolley Order picking 1060x800x1900 capacity RA2408 Technical data: Length: 1060 mm Width: 800 mm Height: 1900 mm Shelf length: 1040 mm Shelf width: 740 mm Shelf height: 290, 680, 1070, 1480 mm Wheel diameter: 200 mm Configuration: 2 steering and 2 fixed castors Year of manufacture: unknown Condition: Used / fully functional Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Tsdpfx Aewh Dileahec Your specialist and contact for intralogistics

Condition: used, empty load weight: 3,100 kg, maximum load weight: 14 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2014, total length: 9,980 mm, total width: 2,480 mm, total height: 1,100 mm, suspension: air, wheelbase: 1,810 mm, color: black, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * Trailer from first owner * Air suspension * BPW axles * 2 LED work lights * 2 additional LED reversing lights * 4 container locks for 20" containers * Duomatic air connection * EBS * Spring-loaded parking brake * Wabco premium braking system * Drawbar with 50 mm towing eyes * Support height: 1070–1320 mm * ABS * Wheelbase: 1810 mm * Gross vehicle weight: 18,000 kg * Unladen weight: 3,100 kg * Payload: 14,900 kg If a new technical inspection (TÜV) is required, we will gladly provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You will find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the item to avoid any misunderstandings regarding its condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged. Tedpjwxyufofx Aahec All information is given without guarantee. We accept no liability for errors or mistakes in this offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: ready for operation (used), Year of construction: 2012, 8 Ton Rewinder, Used Machine Overall dimensions: 2140 x 930 x 1070 mm Weight: 416 kg Minimum closing of the rewinder: 430 mm Maximum opening of the rewinder: 540 mm Tedpfx Aaeupr Ngjhec Max. load capacity: 8000 kg

Year of construction: 2011, condition: good (used), approx. 816 pcs. stacking yokes for long goods, J. Muszinski, 3 tons load capacity, heights 400 / 500 / 600mm - second-hand- : Price per piece ex site, (net) incl. loading! Up to 40 pieces: 109.-€ up to 99 pieces: 105.-€ up to 250 pieces: 99.-€ Tsdpfx Ajttncioahsc For complete purchase: 89.-€ Minimum purchase: 16 pieces Manufacturer: J. Muszinski, welding company Type: HF stacking yokes Year of construction: 2011 Load capacity: 3,000kg Own weight: approx. 87 - 99kg Width: 1070 mm Perm. load with internal height: H = 400mm up to 27,700kg H = 500mm up to 22,000kg H = 600mm up to 18,500kg Quantities: 40 cm 227 pcs. 50 cm 441 pcs. 60 cm 148 pcs. Available: immediately Condition: good Location: 47059 Duisburg

Condition: used, Year of construction: 2023, operating hours: 43 h, machine/vehicle number: H2300010, power: 4 kW (5.44 HP), pressure (min.): 10 bar, used piston compressor available immediately: ALMIG HLA-06-150 (10 bar) with 150 liter compressed air tank The compressor has 43 operating hour and is available immediately. 3 cylinders Tsdjxc Hzkopfx Aahsc Pressure: 10 bar Rated power: 4.0 kW Delivery quantity at 7 bar: 450 l / min Compressed air outlet: 1/2 " Dimensions length x width x height: 1357 x 507 x 1070 mm Weight: 169 kg Visit our store. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, table length: 2,070 mm, table width: 1,070 mm, working length: 2,000 mm, working width: 1,000 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 100 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Offered here is a high-precision laser cutting machine with 3000-watt laser power Model: LG-1020/3kW HaiCut Premium Line - Fully equipped - Innovative 3-gas switching system (pressure and gas type controllable via software) Cutting with N2, O2, mixed gas (compressed air) - Automatic front door - Machine bed lined with refractory bricks (chamotte) - Machine bed and axes measured and calibrated with Renishaw interferometer Our goal is to offer the best, most stable, and cost-effective laser machines currently available on the market. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included, as well as premium on-site support. Please also take note of our attractive leasing/financing offers. New machine, delivery time approx. 6-8 weeks We are happy to demonstrate the machine at our facility. Travel range: approx. 1000 x 2000 mm Table size: approx. 2070 x 1070 mm (i.e. the machine accommodates a small-format sheet) Sliding cutting table For high-precision metal cutting Fully installed and calibrated Cutting software in German incl. nesting module Very easy to operate Switch on and start working Laser source from Max Photonics (G5/German version) with 3000 watts output Comprehensive electronic and mechanical collision protection systems for the cutting head Large laser protection window in the front door Automatic front door Safety light curtain for maximum operator protection Cuts stainless steel up to 12 mm Cuts steel up to 22 mm Cuts aluminum up to 12 mm Tjdpfx Aaoyacwkohec Cuts brass up to 5 mm Heavy industrial quality Complete system / ready for immediate operation LED work area lighting 200mm duct connection for fume extraction incl. extraction fan Leasing or financing available through our financing partner Require different power or table size? No problem, we have several machines in stock or available at short notice. Sales exclusively to commercial customers. Delivery/advice/sales only in Germany/Austria/Switzerland Machine dimensions approx.: Width: 3.6m, Height: 2.1m, Depth: 3.3m Weight: approx. 2.5 tons

Condition: good (used), Steel staircase, external staircase, machine staircase, machine access, extension staircase, machine platform -Machine stairs: machine access -Step size: approx. 1050 x 260 mm Tedowubz Espfx Aahsc -Height: upper step 610 mm -permissible load: kg -Transport dimensions: 1070/950/H205 mm -Weight: 52 kg

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Todpfox Ndu Djx Aahsc Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: new, functionality: fully functional, ✅ New stock ✅ Immediately available ✅ Shipping possible The SCHORR Disc Mower RR580KRM is a powerful high-grass mower, designed to cut through dense, tall grass and brush with ease. With a working width of 58 cm, it allows you to quickly maintain meadows, roadsides, and orchards. The disc mowing system features four freely swinging blades, ensuring an even and high-quality cut. The swath deposit with a removable swath cloth enables clean handling of cut material without mulching. Tjdpfxexvb Rys Aahjc The RR580KRM is self-propelled and easy to operate—even on slopes or uneven terrain. Its wheel freewheel system allows for agile maneuvering, and mowing drive and wheel drive can be engaged separately. Applications: • Orchard meadows & grassland with tall vegetation • Roadsides, embankments, ditches, and fence lines • Fallow ground, border strips around farmyards, riding arenas, or storage areas Even on slopes of up to approx. 30%, the disc mower stays on track and provides a consistently high-quality cut. The swiveling, ball-bearing glide disc and flexible V-belt drive ensure smooth, low-vibration operation and reduced maintenance requirements. Ergonomics & Transport: The handlebar is height-adjustable and foldable, ensuring comfortable operation and space-saving storage. Weighing around 65 kg, the RR580KRM combines a sturdy build with agile handling. Technical Data: Manufacturer: SCHORR Model: RR580KRM Engine: Air-cooled, single-cylinder four-stroke, 6 HP Drive: Self-propelled Blade type: Freely swinging blades, 4 pieces Weight: 65 kg Dimensions: Length 1070 mm, Width 570 mm, Height 840 mm Cutting height: approx. 30 mm Cutting width: 580 mm Spare parts are always available and our service team is ready to assist with any inquiries. Delivery or collection in 48465 Schüttorf is possible, collections strictly by prior arrangement. Financing or leasing options are also available – our team will be happy to advise you on the different options. The RR580KRM is immediately available, robust, agile, and ideal for both professionals and private users.

Condition: excellent (used), RS-Simulators Temperature Shock System ST2K 1000 / 55 The system was regularly serviced and maintained by the manufacturer until it was decommissioned. Device Data Manufacturer: RS-Simulators Type: ST2K 1000 / 55 Design: Temperature Shock System Todpfey H Igfox Aahoc Cooling: water-cooled Description Used temperature shock system for standard-compliant thermal shock testing. Suitable for material, component, and reliability testing. Application in industry, automotive, research, and quality assurance. System Description 2 separate temperature chambers (hot / cold) Automatic horizontal test basket transfer Fast changeover for temperature shock tests Temperature ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Time deviation: ±0.8 K Test chamber Volume: approx. 580 liters Internal (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current consumption: max. 65 A Media connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water requirement: max. 3.2 m³/h Cooling water return: unpressurized Compressed air: NW 7.2, 4–10.5 bar Dimensions: External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight: approx. 2800 kg Equipment: Horizontal basket movement C-rails in the test chamber Large test basket (>1000 mm) Observation window Internal lighting Controller SE-604 Program operation and data logging RS232 interface Refrigeration system Refrigerant: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating data: Operating hours: approx. 4,500 hours Sound level: approx. 67 dB(A) Environmental conditions Temperature: +12 °C to +30 °C Humidity: 25 % to 75 % rel. humidity Scope of supply: RS-Simulators Temperature Shock System ST2K 1000 / 55 Scope of supply as shown in the pictures Functional test Refrigerant service Leakage test Condition: Used. Condition: see pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please contact us.

Condition: new, Year of construction: 2025, Technical Specifications: Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Tsdpfx Aajzkkc Ushec Adjustable Cleaning Length: 0 – 300 mm Approximate Cleaning Speed: 10 – 60 m2/hour Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg CE Certification: Included

Condition: excellent (used), Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Technical Specifications: Build volume: 300 x 300 x 300 mm Layer thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Weight: 40 kg Cooling: Water Central wavelength range: 1070 ±10 nm Todpfszh Dp Asx Aahjc Modulation frequency: 0-50 kHz Average power, max. 600 W Power adjustability: 10-100% Beam parameter: 0.37 mm x mrad Condition: used Scope of delivery: (See picture) (Subject to change and error in technical specifications and details!) We are happy to answer further questions by phone.