Used Zefam Drsd-63 for sale (4,114)

Condition: excellent (used), Parallel-operated, water-cooled spot welding machine Manufacturer: DALEX, Model: PL 63-1 Rated power at 50% duty cycle: 63 kVA Kedpfxezrupzs Adlodt Secondary short-circuit current: 31.5 kA Secondary open-circuit voltage: 7.04 V Electrode force: 390 daN Reach: 250-550 mm Arm distance: 150 or 310 mm with mounting control cabinet according to VDE 0113 Main switch Synchronous welding control 15036

Year of construction: 2000, condition: good (used), Brand: SICA Kdodpfx Aoxu I Szsdlst Type of machine: Planetary saw Model: TRC/S/SY/U 63-400 Year of manufacture: 2000

Condition: used, Year of construction: 1997, machine/vehicle number: 10638, functionality: limited functionality, operating hours: 49,125 h, power: 37 kW (50.31 HP), input voltage: 380 V, input frequency: 50 Hz, pressing force: 80 t, stroke length: 63 mm, table width: 900 mm, table length: 1,200 mm, Pressing force: 80 t Adjustable ram stroke: 16 - 63 mm (Currently fixed at 63 mm; stroke adjustment is not possible because the shift shaft for stroke adjustment is bent.) Ram adjustment: 76 mm Ksdpfx Aozp U Avsdlsdt Table clamping surface approx.: 1200 x 900 mm Number of strokes per minute: 50 - 600 min-1 Power requirement: 37 kW

Condition: excellent (used), Year of construction: 2017, operating hours: 627 h, functionality: fully functional, total length: 6,900 mm, total height: 1,800 mm, total width: 1,600 mm, type of input current: three-phase, input voltage: 400 V, input current: 62 A, passage height: 300 mm, overall weight: 1,200 kg, passage width: 800 mm, input frequency: 50 Hz, nominal power (apparent): 43 kVA, throughput speed: 20 mm/s, temperature: 250 °C, Equipment: documentation/manual, BVM SC 8530 D3 Shrink Tunnel – Year of Manufacture 2017 – approx. 627 operating hours For sale is a BVM shrink tunnel SC 8530 D3, year of manufacture 2017, in technically flawless and visually very good, well-maintained condition. The system has only approximately 627 operating hours and is suitable for shrinking packaging films using hot air circulation. The adjustable tunnel transport and the adjustable side and bottom air flow allow the shrinking result to be adapted to different products and films. Technical data Manufacturer: BVM Brunner GmbH & Co. KG Type: SC 8530 D3 Kdodpfx Aezwk T Tedlst Year of manufacture: 2017 Machine no.: 20170962241 Commission no.: 6224 Operating hours: approx. 627 h Mains voltage: 3N 400 V Mains frequency: 50 Hz Current consumption: 62 A Power: 43 kVA Fuse rating: 63 A Max. passage width: 800 mm Max. passage height: 300 mm Transport speed: approx. 1.2 m/min at 50 Hz Working temperature: 110–250 °C Suitable for film types up to 100 µm External dimensions L × W × H: approx. 6,900 × 1,600 × 1,800 mm Total weight in operating condition: approx. 1,200 kg Sound emission: ≤ 75 dB(A) Equipment / Functions Hot air circulation Adjustable tunnel transport Temperature control Adjustable side air flaps Adjustable bottom air flow Heating fan Cooling fan Electronic preset counter Emergency stop device Cooling automatic Clean and clearly structured control cabinet Original operating manual available Condition The system is in perfect technical condition and is also visually in very good and well-maintained condition. With only approximately 627 operating hours, the machine has very low operating hours. Price €17,000 (negotiable) Inspection possible by arrangement. Further information and pictures available upon request. Subject to prior sale and errors.

Condition: new, Year of construction: 2026, Josan generator sets – proven, robust quality! We offer leasing and financing options. Feel free to ask! ‼️5-year warranty*‼️ Equipped with sockets and Siemens circuit breakers, ATS, and more. Available for pickup in Heilbronn. We also offer affordable shipping. Just ask! Up to 1000 kW possible. All models feature diesel engines with electric starters and 56 kW at 1500 RPM. Feel free to compare prices and inquire about the types of engines offered at what price. Check what was manufactured in Germany or Europe. With us, you can also choose a model with a Cummins engine (at an additional cost). Top quality at a great price! We are here for you in Heilbronn. German company, German laws, German service – that's what you get with us! The price includes everything – all-inclusive! Our electricians, who hold German master craftsman certificates, will quickly assist you without any complications, should the need arise. We also rent out generator sets, so you won't experience any downtime. Discounts are available for orders of 10 units or more. Simply contact us, and we will call you back. Emergency generator set 320 kVA / 250 kW: ➡️Proven engine ➡️Proven 6-cylinder diesel engine ➡️Very quiet, only approx. 65 dB ➡️3-phase, 380/400 V, 220/230 V, 50 Hz ➡️AVR regulation ➡️Dimensions approx. 3700mm x 1300 x 1910mm ➡️Weight approx. 2400 kg ➡️Electric starter ➡️8 sockets at 220 volts, 16 A ➡️1 socket at 400 volts, 16 A ➡️1 socket at 400 volts, 32 A ➡️1 socket at 400 volts, 63 A ➡️Optional: 1 socket 400 volts, 125 A ➡️Surge voltage protection ➡️Socket distribution box, protection class IP44 ➡️CE certificate ➡️With battery charger ➡️With ATS Net price: €22,900.00 Emergency generator set 150 kVA / 120 kW: ➡️380/400 volts, 220/230 volts, 50 Hz ➡️AVR regulation ➡️Very quiet, only approx. 65 dB ➡️Dimensions approx. 2800 x 1100 x 1500mm ➡️Weight 1390 kg ➡️Proven 6-cylinder diesel engine with 132 kW / 1500 rpm. ➡️Electric starter ➡️8 sockets at 220 volts, 16 A ➡️1 socket at 400 volts, 16 A ➡️1 socket at 400 volts, 32 A ➡️1 socket at 400 volts, 63 A ➡️Optional: 1 socket 400 volts, 125 A ➡️Surge voltage protection ➡️Socket distribution box, protection class IP44 ➡️CE certificate ➡️With ATS ➡️With battery charger Net price: €10,900.00 Emergency generator set 63 kVA / 50 kW: ➡️380/400V, 220/230V, 50 Hz ➡️Very quiet, only approx. 65 dB ➡️Proven 4-cylinder diesel engine with 56 kW, 1500 RPM ➡️Weight approx. 860 kg ➡️Surge voltage protection ➡️Socket distribution box, protection class IP44 ➡️Electric starter ➡️CE certificate ➡️8 sockets at 220 volts, 16 A ➡️1 socket at 400 volts, 16 A ➡️1 socket at 400 volts, 32 A ➡️1 socket at 400 volts, 63 A ➡️Compliant with all EU standards (including 220 volts as used in Germany) ➡️With AVR regulation ➡️With battery charger ➡️With ATS Net price: €6,900.00 Emergency generator set 50 kVA / 40 kW: ➡️Proven engine ➡️Proven 4-cylinder diesel engine ➡️Very quiet, only approx. 65 dB ➡️380/400V, 220/230V, 50 Hz ➡️Dimensions approx. 2250 x 960 x 1270 mm ➡️Weight approx. 860 kg ➡️Surge voltage protection ➡️Socket distribution box, protection class IP44 ➡️Electric starter ➡️CE certificate ➡️With ATS ➡️AVR regulation ➡️With battery charger Net price: €6,900.00 Ksdpfx Asp E Egaodledt Emergency generator set 25 kVA / 20 kW: ➡️25 kVA / 20 kW ➡️Proven engine ➡️Very quiet, only approx. 65 dB ➡️3-phase, 380/400V, 220/230V, 50 Hz ➡️Dimensions approx. 1800 × 900 × 1000 mm ➡️Weight approx. 650 kg ➡️Electric starter ➡️CE certificate ➡️With ATS ➡️AVR regulat

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 8/2017, working width: 180 mm, total height: 1,300 mm, overall weight: 800 kg, saw blade diameter: 200 mm, spindle diameter: 40 mm, input voltage: 380 V, type of input current: DC, Used Goma machine for manufacturing French herringbone flooring. An excellent tool for producing high-quality wooden flooring. It allows for the quick and precise production of flooring elements – herringbone patterns – with a choice of 3 angle types (45 degrees, 60 degrees, 90 degrees). The machine is in good working order and comes complete with 2 sets of saw blades and diamond cutters, as well as 3 types of tables with different angle settings. Year of manufacture: 2017. After installation, the machine is ready for operation. Kdedjza U H Dspfx Adlet

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, RÜHLE GFR 450 | Guillotine for frozen meat blocks / guillotine slicer Manufacturer: Rühle GmbH Model / Type: GFR 450 Serial number: 60010525 Year of manufacture: 2016 Power supply: 400 V / 50/60 Hz Power: 7.2 kW Rated current: 12.3 A Kodpfxezxudfo Adljdt Dimensions: 2270 x 710 x 1350 mm Estimated weight: approx. 400 kg Maximum block / portion size: 400 x 200 mm Cutting temperature of raw material: Up to -18 °C The RÜHLE GFR 450 is a professional, industrial guillotine for frozen meat, designed for the initial shredding and cutting of frozen meat blocks, fat blocks, cheese blocks, and other food raw materials without the need for prior thawing. The device efficiently cuts chilled and deep-frozen raw materials at temperatures as low as -18 °C, which helps maintain a continuous cooling chain, prevents leakage of cellular juice, and reduces the loss of raw material mass. The compact and extremely robust design of the GFR 450 model has been designed for continuous operation in the demanding environment of the food processing industry. The use of a powerful 7.2 kW drive, combined with a durable guillotine knife assembly, allows for quick and even shredding of blocks up to 400 x 200 mm into smaller portions, perfectly prepared for further processing in grinders, cutters, or mixers. The device is ideal for butcher shops, meat processing plants, fish processing plants, catering facilities, and the industrial production of ready-made meals.

Condition: excellent (used), Year of construction: 2012, operating hours: 20,101 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 70 kVA, controller manufacturer: Siemens, controller model: 3D-Control Siemens 840D, workpiece height (max.): 525 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 240 kg, total height: 2,800 mm, total length: 4,700 mm, total width: 6,000 mm, table load: 240 kg, rotary table diameter: 500 mm, overall weight: 12,000 kg, spindle speed (min.): 18,000 rpm, operating hours of spindle: 20,101 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 300 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 600 Y-axis travel mm: 500 Z-axis travel mm: 500 C-axis degrees: 360º (0,001) B-axis degrees: -5 / +110º Distance spindle nose - table surface mm: 600 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: 500x525 Max. workpiece weight kg: 240 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 (40/100%ED Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Kdsdpfxjzd Agro Adlst Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Max tool weight kg: 6 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Mist collector Programmable coolant nozzles DXF import function Internal coolant supply Electrical cabinet active cooling unit Temperature compensation Paper band filter DMG AUTOshutdown DMG GREENmode DMG MACHINEcheck High-Speedd-Setting DMG Netservice-client DMG Service Agent Machine running times Under power: 35687 Spindle Working: 20101 Rated power kVA: 70 Basic machine dimensions / weight Length mm: 4700 Width mm: 6000 Height mm: 2800 Weight kg: 12000

Condition: used, Year of construction: 2012, machine/vehicle number: 7363126525, Item No. 26261 Hydraulic CNC Press Brake Technical data: - Pressing force 320 t - Working width 3050 mm - Distance between uprights 2550 mm - Overhang 460 mm Kdedszzzcmspfx Adljt - Installation height approx. 630 mm - Ram stroke 365 mm - Motor power approx. 37 kW - Space requirement approx. W 5700 x H 3250 x D 2450 mm - Weight approx. 17500 kg - Including: - Pivoting arm – control panel with control system CYBELEC EVA-10S; Y1 + Y2; X, R, Z - Motorized back gauge - Motorized crowning - Safety light curtain - Electric foot pedal - 4-way universal die, split - V-dies - Split top tool set, various other tools

Condition: excellent (used), functionality: fully functional, Sauce Mixer / Tilting Process Vessel | Industrial Mixing Vessel Type: Sauce Mixer / Tilting Process Vessel Internal drum diameter: 990 mm Drum depth: 1000 mm Kdjdozz Am Hjpfx Adljt This industrial sauce mixer (process and mixing vessel) is designed for large-scale thermal processing and dynamic mixing of liquid and semi-liquid food products. The machine is ideal for the production of sauces, marinades, vegetable fillings, ready meals, and soups. The rotating and tilting drum made of acid-resistant steel ensures even mixing of the ingredients without damaging the raw material's structure and allows for quick and hygienic unloading. The process is controlled via a B&R Power Panel touchscreen, ensuring precise control of operating parameters and high reliability of the automation system. The included mobile trolley on wheels is used for the safe installation, storage, and transport of the mixing frame with scrapers. This solution significantly facilitates the cleaning, disinfection, and retooling processes outside the working area.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Matec HV 700, Year of manufacture 2021, Heidenhain TNC 640 control system, Travel range X/Y/Z 2600/700/950 horizontal, Travel range X/Y/Z 2600/700/950 vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Kedez Dgzdspfx Adljdt Swivel radius 250 mm, NC rotary table Ø 750 mm, IKZ (internal cooling) 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Electr. handwheel, Dynamics package, Software Kinematics Option, Measuring probe, Partition, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours.

Condition: used, Year of construction: 1963, operating hours: 10,752 h, For inquiries regarding the vehicle, please contact Mr. Mihm (phone number available upon request). Frisch KG Grader Type 50D 10,752 operating hours, 52,683 km, year of manufacture 1963, air-cooled diesel engine, 3 cylinders, permissible total weight: 6,600 kg Kdedezq N Iijpfx Adlot Used condition, commensurate with age. Mr. Mihm (phone number available upon request) will be happy to assist you. Further information can be found on our website. ... Errors, changes, and prior sale are subject to change!!! = Further information = Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 1961, pressure 063 t throat 280 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 230 mm table height over floor 800 mm ram surface 310 x 255 mm ram adjustment 63 mm power requirement 5,5 kW weight 3,95 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m Kjdpozrprdsfx Adledt with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, INOTEC IM-500DV | Vacuum paddle mixer / Meat and stuffing mixer Manufacturer: INOTEC GmbH Model/Type: IM-500DV Serial number: 303-00325 Year of manufacture: 2008 Power supply: 3/N/PE 230/400V 50Hz, current draw 26 A Power: 15 kW / 18 kVA, cos φ 0.85 Kdsdpfxszz Ap Ie Adljt Chamber capacity: approx. 500 liters Control: Siemens SIMATIC touch panel operator Overall dimensions: approx. 2200 x 1400 x 2100 mm The INOTEC IM-500DV industrial vacuum mixer is a high-performance device designed for intensive mixing, standardizing, and massaging of meat fillings, processed meats, ready meals, salads, vegetable products, and products in the bakery and pet food industries. The use of a vacuum system during the mixing process ensures an ideal filling structure, better protein binding, elimination of air bubbles, and extended shelf life and improved color of the finished product. The device is equipped with advanced mixing shafts (a double paddle/counter-rotating system), which guarantee fast, yet gentle and uniform distribution of spices and additives throughout the chamber volume, without destroying the structure of the raw material. The machine's operation is controlled by a reliable Siemens SIMATIC touch panel, allowing for precise programming of mixing times, shaft rotation direction, vacuum level, and automation of production cycles.

Year of construction: 1971, condition: good (used), Pressing force: 63 t Table: 660 x 480 mm Slider: 450 x 280 mm Overhang: 250 mm Slider stroke: 16 to 125 mm Sheet thickness, continuous stroke: 3.2 mm Max. distance between table and slider: 417 mm Die opening: 280 x 250 mm Slider adjustment downwards: 70 mm Stroke rate: 80/min Kdsdpfoh N S Sdox Adlst Power consumption: 6 kW Accessories/equipment: Condition: good Weight: 5 t Dimensions: 1,500 x 1,600 x 2,700 mm

Condition: used, Year of construction: 2016, operating hours: 18,071 h, functionality: fully functional, machine/vehicle number: 06960000941, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, rapid traverse Y-axis: 30 m/min, torque: 280 Nm, input voltage: 400 V, overall weight: 6,000 kg, power: 25 kW (33.99 HP), input frequency: 50 Hz, controller manufacturer: Siemens, controller model: Sinumerik 849D sl, input current: 63 A, tool type: VDI 40, number of axes: 3, DMG MORI CTV 250, 2nd Generation – Vertical Turning Center (Pick-up), Year of Manufacture 2016 For sale is a well-maintained DMG MORI (Gildemeister) CTV 250, 2nd Generation, manufactured in 2016, with only 18,071 spindle hours. The machine is fully equipped for automated series production of chucked parts and is currently still powered on – inspection and demonstration possible by arrangement. Control System & Drive Siemens Sinumerik 840D sl (Slimline) including ShopTurn option AC main drive 25 / 32 kW, torque 280 / 360 Nm Spindle speed up to 5,000 rpm, duty cycle 100 % / 40 % Hollow cylinder, programmable clamping pressure via NC program Axes & Tools 12-station turret (disc diameter 340 mm), all stations powered (UDI 40) C-axis with powered tool system Y-axis +90 / -65 mm Linear guides, ball screws, glass scales, AC servomotors with absolute encoder Rapid traverse 30 m/min Automation & Metrology Kodpfxozi R R Nj Adledt Workpiece transport system SRA 160 (drag chain, NC-controlled) including drag chain set Storage capacity: 30 parts (Ø 30–70 mm, max. 7 kg) or 18 parts (Ø 30–100 mm, max. 15 kg), max. total weight 320 kg including pallets Workpiece diameter 30–160 mm, workpiece height max. 160 mm Robot interface Profinet (electrical interface for 6-axis robot) Workpiece probe Renishaw LP2DD at the loading/unloading station, measuring accuracy 10 µm, with air blow cleaning Coolant & Peripherals Coolant system 8 / 20 bar, tank 600 l, high-pressure pump 20 bar / 40 l/min Coolant supply via turret disc to all stations Band filter system 40 µm with forced indexing, coolant level monitoring Hinged belt chip conveyor with extended discharge chute (+300 mm), enlarged chip container, modified sludge pump Aluminum machining package Integrated work area extraction max. 400 m³/h, work area flushing with 3 flushing nozzles Cabinet cooling up to 40 °C, hydraulic oil cooler Air blower via main spindle, 4-color signal light Remote diagnostics via the internet Connection values: 400 V / 50 Hz, 40 kVA, 63 A · Weight: approx. 6,000 kg Sale from current location, dismantling/loading/transport by arrangement or by the buyer. Sale is subject to the exclusion of all warranties (commercial sale of used machines, sold as seen). Please contact us if you have any questions or would like to arrange a viewing.

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 1,870 h, screw conveyor diameter: 63 mm, Krauss Maffei KMD-63K extruder in very good condition for sale. The machine comes from a technical center and has only 1,870 original operating hours! Kdsdpsz Ag Tgsfx Adljt All functions are in working order. An inspection with a test run without material is possible at any time. Technical data: - Year of manufacture: 2015 - Operating hours: 1,870 - C5 control system - Twin-screw, single-conical design - Closed screw cooling system - Standard profile screw - Motor power: 38.3 kW - Weight: 2,700 kg Delivery includes all documents, hoppers, and adapters. Loading with a forklift. Delivery is possible by arrangement. Export documents and sea packaging are also available. Please do not hesitate to contact us with any questions.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 3.8203, travel distance X-axis: 7,570 mm, travel distance Y-axis: 4,900 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 18,700 mm, table length: 6,850 mm, table width: 2,250 mm, total width: 8,500 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,000 rpm, total height: 7,050 mm, table height: 300 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 2,750 mm, type of input current: AC, table load: 60,000 kg, workpiece weight (max.): 60,000 kg, distance table to spindle center: 2,500 mm, overall weight: 1,45,000 kg, spindle motor power: 63,000 W, feed length W-axis: 2,000 mm, MODEL: Portal Type AGE: 1990 S/N #: 3.8203 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 7570 mm Y-Axis Head Travel: 4900 mm Z-Axis Ram Stroke: 1000 mm, W-axis traverse movement: 2000 mm Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 2600-2750 mm Distance Table To Ram Face: 2500 mm Table Size: 2x3000+850 mm x 2250 mm, two tables for split or integral operation Kdsdpfjyl S Ngsx Adlot Spindle (Quill) Diameter: 225 mm Spindle Taper: ISO #50 Spindle Speeds: 0-2000 RPM Spindle Motor: 63 KW EQUIPPED WITH: SIEMENS System 840D CNC Control, new in 2008 CNC biaxial continous milling head Right angle Milling Head with Auto Indexing Right Angle Head prolonged with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors Way Covers 63 KW Spindle Motor Rapid movements: W-2000 mm/min, Z-10.000 mm/min, X and Y-15.000 mm/min Table loads: 30.000 kg+30.000 kg, max 60.000 kg Weight of the machine: 143.000 kg Outside dimensions: 18.700 x 8.500 x 7050 mm

Condition: used, Year of construction: 2011, operating hours: 43,774 h, functionality: fully functional, workpiece height (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Kdjdpoz Dku Ujfx Adljt Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 43774 Spindle Working: 26476 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Year of construction: 2014, condition: ready for operation (used), travel distance X-axis: 1,600 mm, total width: 1,250 mm, total height: 3,437 mm, spindle motor power: 5,500 W, product length (max.): 3,080 mm, spindle speed (max.): 1,600 rpm, number of axes: 3, This 3-axis M+A RB 63/20 W drilling machine was manufactured in 2014. It features a maximum drilling diameter of 63 mm in steel and 80 mm in cast iron, with a maximum reach from the column of 2000 mm. The machine includes a robust cube table measuring 800 x 630 x 500 mm. If you are looking to get high-quality drilling capabilities, consider the M+A RB 63/20 W machine we have for sale. Contact us for further details. - Maximum drilling diameter in steel (600 MPa): 63 mm- Maximum drilling diameter in cast iron (250 MPa): 80 mm- Maximum reach from column: 2000 mm- Minimum reach from column: 450 mm- Column diameter: 450 mm- Minimum distance between spindle nose and baseplate: 400 mm- Maximum distance between spindle nose and baseplate: 1600 mm- Spindle inner taper: MT 5- Maximum spindle stroke: 400 mm- Vertical adjustment of drill head: 800 mm- Horizontal adjustment of drill head: 1550 mm- Baseplate length: 2900 mm- Baseplate width: 1250 mm- Baseplate height: 260 mm- Number of spindle speeds: 16 (hydraulically set)- Spindle speed range: 20 to 1600 rpm (20, 32, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 1000, 1600 rpm)- Number of spindle feeds: 16- Spindle feed sizes range: 0.04 to 3.2 mm/rev- Maximum permissible torque at spindle: 980 Nm- Main drive motor power: 5.5 kW (1500 rpm)- Arm elevating motor power: 2.2 kW (1500 rpm)- Clamping motor power: 0.75 kW (1500 rpm)- Coolant pump power: 90 W / 0.09 kW (3000 rpm, Flow rate: 25 l/min, Head: 4 m)- Machine total power: 8.45 kW- Operating voltage: 400 V / 50 Hz- Required connection current: 16 A- Maximum load capacity/weight: Approx. 7000 kg- Machine overall dimensions: 3080 x 1250 x 3290 mm (Max height up to 3437 mm)- Noise emission level: ≤ 85 dB (A) Kdjdpezk Ivxjfx Adljt

Condition: used, Year of construction: 2004, operating hours: 11,022 h, functionality: fully functional, machine/vehicle number: 07520000211, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,000 rpm, spindle bore: 79 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, rotational speed (max.): 12,000 rpm, Equipment: rotational speed infinitely variable, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included are a coolant treatment system and a quality selection of tools HSK 63 - A, approximately 40 tools. Also included is a Berg chuck, see photos. The machine is being sold due to lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading is possible without any issues. Kdedpfx Adsug Uc Nelet

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, controller model: Fanuc Oi-MC, KAFO HMC 630 HMC Category: HORIZONTAL MACHINING CENTERS (HMC) Reference No.: 400234 Capacity: 630 X 630 MM Year of Construction: 2008 Technical Specification: SPINDLE Spindle Taper : CAT 50 WORKING CAPACITY Pallet Size : 630 x 630 mm Travels (XYZ) : X1050 x Y800 x Z880 mm B-Axis : 0.001° Distance from spindle nose to table center : 150 - 1030 mm Distance from spindle center to pallet surface : 100 - 900 mm Table Load Capacity : 1200 kg Max. Work Size : Ø1050 mm ATC Tool Change Capacity : 40 Maximum Tool Weight : 20 Kg CNC Kdsdey D E Syspfx Adlst Control : Fanuc Oi-MC

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: 5053-4053142274002, power: 30 kW (40.79 HP), Bar shears, make Peddinghaus, type Caddy 63 Kdodetukpajpfx Adlst Technical data: Shearing force/diameter (max.): 2000 kN/63 mm Drive power: 30 kW Equipment/special feature: bar magazine, 6 m

Condition: good (used), Year of construction: 2013, Vertical machining center Machine type: DMG DMC 635 V / P Control: Heidenhain iTNC 530 Year: 2013 SPECIFICATIONS Travel X-Axis: 635 mm Y-Axis: 510 mm Z-Axis: 460 mm Spindle speeds: 10.000 rpm Tool: SK 40 Toolchanger Tool capacity: 30 Kodpfx Aez Dkt Djdlodt Palett system Amount of paletts: 2 Table size: 560 x 790 mm Equipment No cooling through spindle Electronical handwheel Caliper: TS649 Tool measurement: Tischtaster Chip rinsing pistol

Condition: good (used), Year of construction: 1988, Šmeral Trnava Metal Lepa 63 PA Category: Metal Brand: Šmeral Trnava Model: Lepa 63 PA Year of manufacturing: 1988 Under power: Yes 630 kN --- Kjdpfx Aezw D Dfsdledt ---