Used Rak Arbeitskorb Für 2 Personen for sale (79,779)

Condition: new, Year of construction: 2026, The segment folding machine SM 2020x1.2mm is a machine for bending different elements from the metal sheets with maximum length 2020 mm and maximum thickness 1.2 mm. Can be equipped with third bar segmented. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But segment folding machine SM thanks to special segmented bars gives the opportunity to bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisting of parts with different lengths. So you can adjust it to the length you want and bend boxes around this segmented part. We produce three models of segment folding machine SM: Segment folding machine SM-1270 x 2mm Segment folding machine SM-1550 x 1.8mm Segment folding machine SM -2020 x 1.2mm Those segment machines have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle 135 degrees The standard set of segment folding machine SM includes: The folding machine SM, tempered segments, angle measuring device, the four position angle limiter, two segments with side cuts, multifunctional acceptance table. As an additional option you can get cross cutting knife for the segment sheet metal bending machine. The maximum thickness of metal the knife can cut is 0.8mm steel. The segments of the folding machine are tempered and the rigidity of them is about 30 HRC. Lodpev Tyr Isfx Akmjhn So it lets the opportunity to bend thick metal in any part of bending machine without any damage. We have started producing of segment folding machine SM since 2003 y. So we have a great experience in segment machines producing and can propose you a perfect solution for you business. Specifications Material Material width (mm) 2020 The material thickness (mm) 1.2

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Ledpfx Akoxlkg Aemshn On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: MING2/3/4/5/6/7, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 21,000 mm, total width: 2,150 mm, total height: 3,000 mm, axle spacing: 1,480 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Ohra - Double-sided cantilever rack, long goods rack, heavy-duty rack Consisting of 15 uprights + 60 cantilever arms Height 3.05m - Uprights IPB200 (HEB200) - Upright spacing 1.48m center-to-center Total depth 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7500kg Lhsdpfev Smm Njx Akmon Wooden inserts can be supplied upon request. Six racks are available! 4 with 4 levels - 60 arms 2 with 6 levels - 90 arms + €2,000 surcharge Very good condition, see pictures A forklift is available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: MING8+10 / 9, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 21,000 mm, total width: 2,150 mm, total height: 3,000 mm, axle spacing: 1,480 mm, load capacity per stand: 7,500 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Ohra - Double-sided cantilever racking, long goods racking, heavy-duty racking Consisting of 10 uprights + 40 cantilever arms Height 3.05m - Uprights IPB200 (HEB200) - Upright spacing 1.48m center-to-center Total depth 2.15m (double-sided) Arms 90cm - IPE100 Load capacity per boom 1000kg Upright load capacity 7500kg Wooden inserts can be supplied upon request. Lodjv Smrxopfx Akmehn Shelf is available 3 times!!!! Nos. 8 and 10 - 4 with 4 levels - 40 arms No. 9 - 1 with 6 levels - 60 arms + €1,000 surcharge Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your postal code

Condition: used, mileage: 1,98,035 km, power: 332 kW (451.39 HP), first registration: 09/2009, fuel type: diesel, empty load weight: 13,250 kg, maximum load weight: 12,750 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,500 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 5,100 mm, loading space width: 2,430 mm, loading space height: 850 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, differential lock, low noise, trailer coupling, Vehicle location: Bovenden, steel superstructure, mtl. house, 1x air seat, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, compressed air horn, switch 16, ABS (anti-lock braking system), constant throttle, raised exhaust, differential lock, rotating beacon, storage box, leaf suspension, on-board matics left, towbar air-light-hydr, low-noise G1, folding U-protection, roof hatch, green environmental badge Wheelbase: 3500 mm Body: Dautel 3-sided tipper body with Bordmatik left 50er AHK, turbocharger and clutch 2023 repaired for approx. 6,000 EUR, valves for tipper changeover new. Loading height approx. 1590mm! ACCESSORIES WITHOUT WARRANTY, changes, prior sale and errors excepted! Lodpsvhnllefx Akmshn - .

Condition: excellent (used), functionality: fully functional, from an EDM (electrical discharge machining) machine Travel in X: 220 mm Travel in Y: 160 mm Lsdpfxjz Euqio Akmjhn Mitutoyo 2-axis digital readout with a display accuracy of 1/1000 mm . Base without evaluation .

Condition: used, mileage: 2,38,000 km, power: 96 kW (130.52 HP), first registration: 05/2020, fuel type: diesel, maximum load weight: 1,280 kg, overall weight: 3,300 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,100 mm, loading space height: 1,900 mm, Year of construction: 2025, - Used FORD TRANSIT 330 van, Trend, L2 H2 – Registered in June 2020, 2000Tdci 130hp engine, Euro 6d, 238,000 km. - 3-seater van with a cargo area measuring 3100 x 1900 mm, protective lining for the cargo area. - Air conditioning, cruise control, fog lights, electric mirrors, remote locking, ABS + ESP, Bluetooth radio, front and rear parking sensors, spare wheel, two keys. - Vehicle in good condition, tires at 80%, well-maintained bodywork, intact interior. - New timing belt and recent service. Single owner. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy. Opening hours: Monday to Friday: 8.30 / 12.15 - 14.00 / 19.00 Saturday: 8.30 / 12.00 - 14.00 / 17.00 - Certified mileage. Lodpfjz Dpyvex Akmehn - Test drive possible by appointment. - Ownership transfer can be completed on-site. - Customized financing options available. Carlo Mauri Srl declines all responsibility for any unintentional inaccuracies in the advertisement, which does not constitute any contractual commitment. Prices are quoted excluding VAT and ownership transfer fees.

Condition: new, functionality: fully functional, MOOG G405-611A CA14954020P, NOBRAKE Type: CA14954020P.NOBRAKE Model: G405-611A Power: 3.187 kW Rated speed: 4000 rpm Torque: 11.2 Nm Year of manufacture: 07/2007 Ljdpfxozr H A Ho Akmshn Without brake (NOBRAKE) IP65 protection rating

Condition: new, clear span: 2,700 mm, total length: 2,760 mm, The scope of delivery includes: 1x Push-through protection, new Type: universal Suitable for field width: 2,700 mm Customs tariff number: 73066192 Steel grade: S235 | S275 Consisting of EACH: 1 x Square tube, new Material color: hot-dip galvanized Dimensions: 50x50x2.0 mm Weight: 3.26 kg | per meter Tube length: approx. 2,760 mm Ljdszu Stcepfx Akmohn 2x Angle bracket, new Material color: sendzimir galvanized Design: Holding device Profile dimensions: 155 x 120 mm Headplate: 120 x 40 mm Overhang: 75 mm Design: 90 degrees Opening for square tube: 51 x 51 mm Material thickness: 3.00 mm Weight / piece: 0.460 kg Incl. each: 4 x Screws, M8 x 20 mm 4 x Nuts, M8 4 x Washers, M8 2 x Drill screws, self-tapping 25 mm You can also request the following lengths: (For field width:) 1,350 mm = 19.00 € plus 19% VAT 1,800 mm = 26.00 € plus 19% VAT 1,900 mm = 27.00 € plus 19% VAT 2,000 mm = 29.00 € plus 19% VAT 2,100 mm = 30.00 € plus 19% VAT 2,200 mm = 31.00 € plus 19% VAT 2,300 mm = 33.00 € plus 19% VAT 2,400 mm = 34.00 € plus 19% VAT 2,500 mm = 36.00 € plus 19% VAT 2,600 mm = 37.00 € plus 19% VAT 2,800 mm = 40.00 € plus 19% VAT 2,900 mm = 41.00 € plus 19% VAT 3,000 mm = 42.00 € plus 19% VAT 3,100 mm = 44.00 € plus 19% VAT 3,300 mm = 47.00 € plus 19% VAT 3,600 mm = 51.00 € plus 19% VAT 3,900 mm = 55.00 € plus 19% VAT 4,300 mm = 61.00 € plus 19% VAT General information about the article: This article is only offered for collection. Any additional transport or shipment of this article will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, axle configuration: 2 axles, first registration: 05/2003, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2003, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes = More information = Lhsdozvaudopfx Akmsn Tyre size: 385/65 Make axles: BPW Tyre profile: 40% Brakes: disc brakes Suspension: air suspension

Condition: used, mileage: 1,20,545 km, power: 265 kW (360.30 HP), first registration: 06/2017, fuel type: diesel, empty load weight: 11,500 kg, maximum load weight: 6,500 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 4,200 mm, next inspection (TÜV): 06/2026, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,200 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, fog lights, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, steel body, chassis cab, 1x air-suspended seat, electrically adjustable mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, 8-speed manual gearbox, ABS (anti-lock braking system), traction control (ASR), engine brake, PTO, differential lock, fog lamps, beacon, leaf suspension, trailer hitch with air, electrical, and hydraulic connections, winter service equipment, lashing eyes, pendulum flaps, roof hatch, crane mounted behind cab, emergency stop, grab control, foldable, 2-point hydraulic stabilizers, radio remote control, 2x hydraulic extensions, green environmental sticker. Wheelbase: 4200 mm. Body: Meiller 3-way tipper body with Hyva HB60X-E2 crane with radio remote control (remote-control). Load chart: 2.45m - 2,615kg, 3.88m - 1,650kg, 5.45m - 1,150kg, 7m - 885kg. Loading height approx. 1,530mm! Lhedpfx Akoz A Ar Nomsn Matching snow plow -89136- available at extra cost of €3,900.00 net! Matching grab -9586- available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: used, maximum load weight: 25,400 kg, overall weight: 35,000 kg, axle configuration: 2 axles, first registration: 07/2003, next inspection (TÜV): 12/2026, total length: 14,000 mm, total width: 2,600 mm, total height: 3,890 mm, Additional information: * Maximum axle load | First axle: 10000 kg * Maximum axle load | Second axle: 10000 kg * Tire tread depth inner left | First axle: 40% * Tire tread depth inner right | First axle: 40% * Tire tread depth inner left | Second axle: 40% * Tire tread depth inner right | Second axle: 40% * Tire size | First axle: 425/65 R22.5 * Tire size | Second axle: 425/65 R22.5 * Type | First axle: Dunlop R * Type | Second axle: Dunlop R * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Drum brakes * Suspension | First axle: Air suspension * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Drum brakes * Suspension | Second axle: Air suspension Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your specific country in advance. Lhedpfxez N N S Ro Akmen Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors. The stated prices exclude BPM and are only valid for export.

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 7,458 h, axle configuration: 4x4, power: 60 kW (81.58 HP), fuel type: diesel, maximum speed: 40 km/h, first registration: 09/2010, color: red, empty load weight: 2,300 kg, overall weight: 3,700 kg, number of seats: 1, number of cylinders: 4, total length: 3,940 mm, total width: 1,920 mm, motor manufacturer: VM, total height: 2,080 mm, gearing type: hydrostat, Equipment: additional headlights, air conditioning, cabin, front power take-off, hydraulics, lighting, power assisted steering, rear power take-off, trailer coupling, Tractor unit: + Aebi + Terratrac TT 240; 359E + Registration date: 07.09.2010 + 7,458 operating hours + 82 hp VM diesel engine, 2970ccm + Hydrostatic transmission, fast/slow, max. speed 40 km/h + All-wheel drive + Differential lock + Front and rear PTO + Front and rear hydraulics + Front three-point linkage with lateral adjustment + Four-wheel steering + Warning light + Air conditioning + Trailer hitch (3,500 kg) + Opening windows Lhodpfoz Nh Hgex Akmen + Oil leakage between engine and transmission + 3940mm x 1920mm x 2080mm (l x w x h) + Unladen weight: 2,300 kg; permissible GVW: 3,700 kg + Vehicle from municipal ownership Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: good (used), machine/vehicle number: F20271J00739, Year of construction: 2019, operating hours: 2,416 h, load capacity: 1,200 kg, lifting height: 2,924 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 2,015 mm, battery voltage: 24 V, fork length: 1,150 mm, front tire size: , rear tire size: , overall weight: 599 kg, enginetype: Electric, manufacturer: Still Ledpfxoz Hgfzo Akmohn Serial Number: F20271J00739 Battery Details: 24 Volt

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Ledsz N R U Hjpfx Akmjhn Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,000 kg, total length: 17,000 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 2, frame height: 3,500 mm, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 8,500 mm, support length: 2,700 mm, 2 rows of pallet racks (4 x M35112711-3) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 3 beam levels, shelf load 3000 kg. - 8 frames (RM3511 - RAL5019) - 16 base plates, shims, and screws - 32 ground anchors (ZZBA1210) - 36 individual crossbeams (T27114 - RAL2008) - 4 collision protection / impact protection (ZRS40901) - 2 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; Ljdjv Ungcspfx Akmjhn except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Involute gear cutters for SYNCHROFLEX timing belts: Lhedpfszvrupex Akmen Involute gear cutters for SYNCHROFLEX timing belts: 3M GT, 56x60x22mm T16-25 Involute gear cutters for SYNCHROFLEX timing belts: 3M GT, 56x60x22mm T26-50 Involute gear cutters for SYNCHROFLEX timing belts: 5M GT, 56x60x22mm T17-31 Involute gear cutters for SYNCHROFLEX timing belts: 5M GT, 56x60x22mm T32-79 Involute gear cutters for SYNCHROFLEX timing belts: 8M GT, 70x70x27mm T18-28 Involute gear cutters for SYNCHROFLEX timing belts: 8M GT, 70x70x27mm T29-89 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T12-20 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T21-45 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T46-80 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T13-17 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T18-25 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T26-40 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T41-R Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T12-15 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T16-20 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T21-45 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T46-114 Involute gear cutters for SYNCHROFLEX timing belts: T20 80x80x32 T15-20 Involute gear cutters for SYNCHROFLEX timing belts: T20 80x80x32 T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T10-14 Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T15-20 Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T12-15 Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T16-20 Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT20 80x80x32mm T15-20 Involute gear cutters for SYNCHROFLEX timing belts: AT20 80x80x32mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T11-16 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T17-31 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T32-79 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T80-200 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T18-R Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T41-89 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T90-200 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T41-89 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T90-R Involute gear cutters for SYNCHROFLEX timing belts: HTD20M 80x80x32mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD20M 80x80x32mm T41-R Involute gear cutters for SYNCHROFLEX timing belts: MXL 56x60x22mm T10-23 Involute gear cutters for SYNCHROFLEX timing belts: MXL 56x60x22mm T24-R Involute gear cutters for SYNCHROFLEX timing belts: XL 56x60x22mm T10-R Involute gear cutters for SYNCHROFLEX timing belts: L 56x60x22mm T10-R Involute gear cutters for SYNCHROFLEX timing belts: H 70x70x27mm T14-19 Involute gear cutters for SYNCHROFLEX timing belts: H 70x70x27mm T20-R Inv

Condition: new, clear span: 2,700 mm, total length: 2,780 mm, The scope of delivery includes: 1x Push-through safety device, new Type: universal Suitable for field width: 2,700 mm Customs tariff number: 73066192 Consisting of EACH: 1 x Rectangular tube, 2nd choice (new goods) Material color: RAL 5010 blue Dimensions: 50x40x2.0 mm Weight: 2.64 kg | per meter Borehole diameter: 9 mm Tube length: 2,780 mm Center-to-center distance: 2,740 mm 2x Corner angle bracket, new Material color: sendzimir galvanized Design: Mounting bracket Profile dimensions: 155 x 120 mm Head plate: 120 x 40 mm Overhang: 75 mm Design: 90 degrees Opening for square tube: 51 x 51 mm Material thickness: 3.00 mm Weight / piece: 0.460 kg Incl. each: 4 x Screws, M8 x 20 mm 4 x Nuts, M8 4 x Washers, M8 2 x Screws, M6 2 x Nuts 2 x Washers You can also request the following additional lengths: (For field width:) 1,350 mm = €18.00 plus 19% VAT 1,800 mm = €23.00 plus 19% VAT 1,900 mm = €25.00 plus 19% VAT 2,000 mm = €26.00 plus 19% VAT 2,100 mm = €27.00 plus 19% VAT 2,200 mm = €28.00 plus 19% VAT 2,300 mm = €29.00 plus 19% VAT 2,400 mm = €31.00 plus 19% VAT 2,500 mm = €32.00 plus 19% VAT 2,600 mm = €33.00 plus 19% VAT Lhodpfxjzu Ande Akmsn 2,800 mm = €36.00 plus 19% VAT 2,900 mm = €37.00 plus 19% VAT 3,000 mm = €38.00 plus 19% VAT 3,100 mm = €39.00 plus 19% VAT General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Year of construction: 2019, condition: used, functionality: fully functional, overall weight: 5,425 kg, machine/vehicle number: 3037, Scodix Ultra 202 – Refurbished Counter reading: Foil copies: 1,731,153 Total copies: 3,459,082 Specifications: Power supply: 400 VAC, 3P+N+PE; 63A x3; 50/60 Hz; SCCR: 10kA Made in Israel Year of manufacture: 12/2019 Weight: 5,425 kg Dimensions: 7880 x 1790 x 1979 mm Foil roll width: 50-500 mm Maximum foil roll diameter: 30 cm Number of rolls that can be used simultaneously: 4 Layer thickness: 5 - 250 microns Maximum layer thickness: 700 microns Basis weight: 135-675 g/m² Resolution: 2540 x 450 dpi Maximum format: 545 x 788 mm Minimum format: 297 x 420 mm Maximum image area: 748 x 504 mm Lsdjz Imi Njpfx Akmehn The machine is fully functional. The machine is available in Essen. Transport can be negotiated individually.

Condition: good (used), Year of construction: 2005, stroke length: 1,000 mm, throat depth: 400 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, overall weight: 9,650 kg, total length: 5,700 mm, total width: 1,800 mm, total height: 3,100 mm, power: 7.5 kW (10.20 HP), pressing force: 120 t, clearance between the columns: 2,550 mm, Equipment: documentation/manual, Press brake SAFAN - H-Brake 120TS1 MACH-ID 9820 Make: SAFAN Type: H-Brake 120TS1 Control: TS1 YOP: 2005 Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Lodpfx Akoz Hka Asmshn Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X/ Z1 / Z2 / R-Central Control: TS1 Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Machine in perfect condition, ready for production. Format: 500x700mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes electronically adjusted via computer 1 cross-cut knife Lhedoz Dta Tspfx Akmen First cassette extended. Continuous speed control via inverter control panel Counter with batching function and folding speed indicator. Rietschle compressor. Raised soundproofing hood. Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Window cassette with control unit. Mobile delivery with continuous speed control.

Condition: used, mileage: 50,000 km, power: 309 kW (420.12 HP), first registration: 07/1996, fuel type: diesel, empty load weight: 18,800 kg, maximum load weight: 13,200 kg, overall weight: 32,000 kg, tire size: 365/85R20, axle configuration: 8x8, wheelbase: 5,200 mm, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 3, total length: 9,800 mm, total width: 2,500 mm, total height: 3,550 mm, Equipment: additional headlights, all wheel drive, cabin, differential lock, low noise, power assisted steering, Vehicle location: Bovenden, warehouse, 1 air suspension seat, double bench seat, 16-speed gearbox, differential lock, storage compartment, leaf spring suspension, U-shaped protection, side aluminum fender, roof hatch, green environmental badge. Wheelbase: 5200 mm, Superstructure: Aluminum tank superstructure, spare wheel available at an extra cost! Lhodpsy Tbg Eefx Akmsn Loading dimensions: 9800mm x 2550mm x 3550mm. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 2,22,000 km, power: 96 kW (130.52 HP), first registration: 02/2021, fuel type: diesel, maximum load weight: 1,100 kg, overall weight: 3,325 kg, axle configuration: 4x2, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,100 mm, loading space height: 1,900 mm, Year of construction: 2021, - Used Ford Transit 330 L2 H2 Van - September 2021, 2000cc Tdci 130hp engine, Euro 6D, 222,000 km. - 3-seater van with a cargo area measuring 3100 x 1900 mm, protective cargo area lining. Ledsyaqxcjpfx Akmohn - Air conditioning, ABS + TCS + ESP, Bluetooth radio, cruise control, power-folding mirrors, front and rear parking sensors, 235/65/16 tires, spare wheel, two keys. - Vehicle in good condition, tires at 90%, well-maintained bodywork, intact interior, single owner. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy. Opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM Saturday: 8:30 AM / 12:00 PM - 2:00 PM / 5:00 PM - Certified mileage. - Test drive possible by appointment. - Ownership transfer handled on-site. - Customized financing options available. Carlo Mauri Srl disclaims any responsibility for any unintentional discrepancies in the advertisement, which does not constitute any contractual obligation. The prices shown are exclusive of VAT and ownership transfer fees.

Condition: new, maximum load weight: 31,175 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,575 mm, loading space volume: 92 m³, Year of construction: 2026, Equipment: ABS, Stock number: 5742 THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! Kraker approx. 92 m³ moving floor trailer with 10mm Cargofloor floor / remote control / wear plates / pneumatic underride guard / rental also possible! ---- * Manufacturer: Kraker * Model: K-Force - Moving Floor * First registration: - (NEW VEHICLE) * Color: Body RAL 9010 / Chassis MicroZinq / Tarp SIO 7999 Black * Technically permissible total weight: 39,000 kg * Unladen weight according to manufacturer: 7,825 kg * Payload: 31,175 kg * Volume: approx. 92 m³ (13.53 m long x 2.48 m wide x 2.369m/2.782m high) * Axles: 3x SAF with 1st axle as lift axle and starting aid / disc brakes * Tyres: 385/65R 22.5 on steel rims * Suspension: Air suspension with lift and lower * EBS Wabco * Chassis: Microzinc * Rear wear plates 1,250 x 2,500 x 3 mm * Double-wing rear doors with pneumatic locking * Operator platform at the front with access on the left * Saddle height: 1150mm * Cargo Floor CF 500 Compact floor with 21 floorboards * Floor 10mm thick, ribbed, with aluminium end caps * Operation via remote control and control box at the left rear * Rolling tarp with central locking * Sliding wall (moveable partition) made of aluminium with drag sheet * 2 plastic track cleaners on the sliding carriage * Extendable access steps at the rear right * 4 x pivoting steel roof bows, 50mm round * 2 x round LED tail lights per side * 2 x LED work lights at support leg height * 2 x LED reversing lights mounted laterally behind the axles * Plastic toolbox at rear left * Holders for broom and shovel * 10-step ladder * Hydraulic hoses at the front approx. 3.5 m long * Single mudguards * Compressed air connection for cleaning gun Ledpfsyawkxjx Akmjhn * TPMS tire pressure monitoring system * Wabco Smartboard# AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! Note on possible errors in the listing: Despite careful preparation of this listing, there may occasionally be errors in the text or details. We assume no liability for errors, changes, or prior sale. All information is supplied without guarantee. Please contact us to verify details or clarify any questions.

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer, FIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 hp * TEX 230PE H28 hammer Ljdpfxoyai Euj Akmjhn * TEX 10PSKL hammer * TERRA hammer TU 055R earth drill * Compressed air hose * Hose reel Compressor with generator, ATLAS COPCO XAS 58-7, manufactured: 11/2023 Equipment: Construction compressor Atlas Copco MCT, type XAS 58-7 G, with integrated generator, 6 kVA, sockets: 2 x 360V / 1 x 230V. Unbraked chassis, height adjustable, initial oil filling, crane eye, closed bottom pan, starter motor protection (SMP), overrun and parking brake, reversing automatic, spur gear, support leg (unbraked version), truck DIN tow hitch (400mm), lighting according to StVZO, operating permit. Accessories: Compressed air hammer Atlas Copco, type TEX 10 PSKL, weight: 10.7 kg Compressed air hammer TEX 230 PE, weight: 27 kg Various pointed and wide chisels, asphalt chisel 115 mm wide TERRA hammer TU055R, TERRA compressed air hose, length approx. 15,000 mm, TERRA oiler. Original price: complete with accessories, €28,000 net. * New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Come and see for yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transport We will gladly assist you in organizing special transport. Day registrations / export license plates We will gladly assist you in obtaining export license plates/short-term registrations. Processing of customs formalities