Used Actuator for sale (535)

Condition: used, mileage: 7,72,000 km, power: 360 kW (489.46 HP), first registration: 06/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: blue, gearing type: mechanical, emission class: euro6, Year of construction: 2014, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, SCANIA R490 FLATBED WITH FASSI CRANE 14.40 M – OVERWIDTH DEVICE – LEATHER – STEERING/LIFT AXLE – RADIO – VEHICLE HISTORY – FROM 1ST OWNER – WORKSHOP MAINTAINED Kodpfx Aszyw Hljfdonb – VIDEO AVAILABLE UPON REQUEST – IMMEDIATELY READY FOR USE VEHICLE EQUIPMENT – FLATBED BODY – INTERCHANGEABLE CHASSIS – OVERWIDTH – MANUAL GEARBOX – RETARDER – CRUISE CONTROL – DISTANCE CONTROL CRUISE CONTROL – LANE KEEPING ASSIST – ACTIVE BRAKE SYSTEM – BLIND SPOT ASSISTANT – DIFFERENTIAL LOCK – AIR CONDITIONING – STAND HEATER – LEATHER DRIVER'S SEAT – STEERING AXLE – LIFT AXLE – FULL AIR SUSPENSION – ROOF-MOUNTED SPOTLIGHTS – REFRIGERATOR – 2 X SLEEPER CABINS – 1 X TANK CRANE – FASSI F485A.2.25 XE DYNAMIC – YEAR OF CONSTRUCTION: 2014 – RADIO REMOTE CONTROL – MAX. LIFTING CAPACITY: 13,500 KG – MAX. OUTREACH: 14.40 M TECHNICAL DATA – MILEAGE: 772,000 KM – WHEELBASE: 4.45 M – TIRE SIZE 1ST AXLE: 385/55 R22.5 – TIRE SIZE 2ND AXLE: 315/60 R22.5 – TIRE SIZE 3RD AXLE: 315/60 R22.5 – TIRE CONDITION: VERY GOOD – PERMISSIBLE TOTAL WEIGHT: 26,000 KG – UNLADEN WEIGHT: – PAYLOAD: ADDITIONAL INFORMATION – VEHICLE FROM 1ST OWNER – WORKSHOP MAINTAINED – VIDEO AVAILABLE UPON REQUEST – FLATBED BODY WITH OVERWIDTH – INTERCHANGEABLE CHASSIS – VEHICLE IMMEDIATELY AVAILABLE – VEHICLE IMMEDIATELY READY FOR USE – IDEAL FOR CONSTRUCTION, ASSEMBLY, STEEL CONSTRUCTION AND HEAVY-DUTY OPERATIONS ---- SERVICE HISTORY * 20.10.2025 – 735,080 km * Gearbox noise during shifting checked * Engine clutch renewed * Release lever overhauled * Crankshaft seal renewed * Gearbox oil pump sealed * Rubber mounts renewed * Auxiliary drive seal replaced * Test drive carried out * Total amount: 4,745.95 € * 17.03.2026 – 762,004 km * Turbocharger noise checked * Actuator motor of the VGT turbocharger identified as defective * Turbocharger renewed * S-maintenance service carried out * Air filter renewed * Cab air filter renewed * Total amount: 6,951.97 € * 02.04.2026 – 765,340 km * Tie rod of the front axle replaced * Toe-in adjusted / measured * Cardan shaft installed * Test drive carried out * Labor: 483.00 € * Parts: 353.25 € * Small parts and cleaning materials: 12.08 € ---- EXPORT / NOTE EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € – 2,000 € EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € – 2,000 € EXPORT DECLARATION EXW POSSIBLE WITHIN 10 MINUTES (AUTHORIZED EXPORTER). VEHICLE RESERVATIONS PLEASE ONLY IN WRITING. VERBAL AGREEMENTS ARE NOT BINDING. SUBJECT TO CHANGE, ERRORS AND PRIOR SALE.

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Knjdjy U Nqnspfx Afdob

Condition: used, Chemical Mixer, Stainless Steel Mixer, Chemical Mixer 2000 L, Used Machine Manufacturer: Chemplex Type: T240 Electrical power: Heating: 20 kW Mixer motor: 3 kW Weighing system: MS-h10/kn, MS-CT-SQB – maximum weighing capacity 3,500 kg Maximum heating temperature: 90 °C Kjdpfxsyc Sfvo Afdjnb Capacity: 2,000 L Description: General-purpose chemical mixer manufactured by Chemplex with a 2,000-liter capacity, designed with an integrated tank weighing system (3 load cells with indicator). The vessel is an atmospheric tank with a DN100 bottom outlet. Heating is provided by a 20 kW electric bottom heater. The mixer is equipped with a propeller-type agitator. It features a flat lid, which is openable and fitted with a safety grid. The lid includes 4 dosing/inlet nozzles. Recommended operating temperature: 20–60 °C. The bottom discharge nozzle is fitted with a stainless steel ball valve, equipped with a pneumatic actuator and bubble position indicator. The actuator is spring-loaded, providing a fail-safe (safety closed) function.

Condition: used, mileage: 86,858 km, power: 75 kW (101.97 HP), first registration: 05/1993, overall weight: 5,900 kg, fuel type: diesel, color: green, gearing type: mechanical, loading space width: 1,850 mm, loading space length: 4,000 mm, loading space height: 1,900 mm, total width: 2,190 mm, total height: 3,100 mm, number of seats: 2, Equipment: ABS, parking heater, 711D Ex-government vehicle (Federal Police), power steering, ABS, 5-speed gearbox, hot water auxiliary heater with second battery, sliding door on passenger side, rear door, rear step, overhead storage compartments, 2x roof hatches in the cargo area. Vmax approx. 116 km/h The bodywork is in excellent condition. The side panels, sills, sliding door, and rear were professionally repaired and repainted in our own workshop. This vehicle received from us: - New cab glazing (windscreen, winding windows, and quarter windows) in real glass - A fresh inspection with engine oil and brake fluid change as well as lubrication - Clutch actuation renewed - Auxiliary heater serviced - Starter and auxiliary batteries replaced (total of 4 units) - New TÜV (roadworthy certificate) and emissions test upon delivery A very tidy vehicle, ready to drive off directly, ideal as a basis for a very robust camper van Knsdpfoxpbp Nex Afdjb Price includes: new TÜV & emissions test, historic vehicle certificate (H-registration) available on request Interior dimensions measured from behind the driver’s seat (LxWxH in mm): 4000 x 1850 x 1900 Changes, prior sale, and errors excepted.

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Kodpfxezqt Dne Afdenb Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Condition: used, Year of construction: 1998, Velcorin dosing system for the cold sterilisation of beverages during bottling. Velcorin is drawn from a storage tank and injected into the product stream via a dosing pump. System out of service. Ideal as a source of spare parts. Additional title: Cold sterilizing Capacity: 7200 l/h Ksdpfx Ajzty S Dsfdsnb Maximum permissible dosing rate: 20 ml/hl Features: Velcorin storage tank; compressed air connection; dosing pump (Cibus 32 lubricant); flow/volume measurement module; pneumatic control block; centrifugal fan; control panel with buttons and warning lights; various valves, actuators and sensors

Condition: used, Year of construction: 2020, _____KTS 30 Special / Crane-Manure Tank Saddle Trailer, 3-axle, 30 cbm tank capacity - V2A stainless steel tank, DIN 1.4301, manufactured in-house - Nova-Gray powder-coated frame - Tank diameter 2200 mm - Manhole at the rear - 3 baffle plates specially welded - Rinsing system for stirring the contents - 2 x hose storage, aluminum - Tire size 385/65 R 22.5 - 3 axles, SAF with air suspension - ABS - EBS - Disc brakes with special off-road protection - Wabco braking system with spring brake accumulator and parking brake - 1st axle as a lift axle with starting aid - 2nd axle rigid - 3rd axle trailing steering axle with automatic locking from 30 km/h and when reversing - Automatic filling shut-off via float and indicator at the front - Free filling and venting - 6 x polyethylene fenders - 2 x LED work lights at the rear - Aluminum support legs - Underrun protection with truck tail lights - 1 x lockable storage box on the left, water tank with soap dispenser for hand washing on the right - Document holder - Ge-Ka couplings for filling at the suction arm - Compressed air discharge at the suction arm for suction hose - TÜV inspection - Surcharge for tank with 31.7 cbm - KTS surcharge for 31.7 cbm tank instead of 30.0 cbm (longer chassis required) - All KTSPROFI package, KTS 30 light - Simplest operation by pressing a button - Fully automatic interlocking of the tank ventilation valves - No possibility of incorrect operation - With overpressure and underpressure valves - Ventilation valve and suction valve as pneumatic flat gate valves - Main control panel at the rear left in a stainless steel housing with laser-engraved control panel - Additional control panel at the front left, level indicator at the rear with cover - Automatic pump shut-off when full - Pump Vogelsang 6 cbm KTS 30 - Vogelsang rotary lobe pump VX 186-260, 6,000 liters / min. - Injection system and interchangeable housings - Docking funnel at the top, 8 inches with knife gate valve (KTS) - with pneumatic actuation (flat gate valve) for all vehicles - Pump mounting parts in stainless steel 1.4301 - instead of galvanized version - Flat gate valve under the tank, KTS 30 - Flat gate valve under the tank for discharging with KTS 30 (MANDATORY !! for KTS docking funnel at the bottom and if there is the possibility of transferring liquid) - Overflow tank, KTS - made of stainless steel with swivel flap and drain valve - Additional LED headlight at the front (2 pieces) - 2 LED spotlights at the front, mounted under the hose trays on the right and left - Transfer crane 6" KTS short - Transfer crane in 6" up/down, right/left, approx. 6 m long. Only for emptying! - Slide dome cover 600 KTS 30 - Slide dome cover 600 pneumatic for KTS 30 - Storage location: BNP PARIBAS LEASE GR Kodpfx Afjzpgrijdonb

Year of construction: 2000, condition: ready for operation (used), Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the manufacturer in 2021. An on-site inspection is possible. Ksdpfx Asztdt Eefdjnb

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 109238, Technical characteristics: Work Area - Chuck diameter: 260 mm - Maximum workpiece weight: 150 kg - Swing diameter: 280 mm - Maximum workpiece diameter/height: 200/200 mm - X-axis stroke (working stroke): 760 mm / Rapid traverse in X: 60 m/min / Feed force: 6.9 kN - Z-axis stroke: 415 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN - Loading time: 5 to 6 seconds - Standard closed automation (number of loading stations by workpiece diameter): 14 (80–200 mm), 18 (30–160 mm), 30 (30–85 mm) Main Spindle - Spindle interface according to DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Motor output at 100% / 40% duty cycle: 25 / 18 kW - Torque at 100% / 40% duty cycle: 280 / 200 Nm Tool Holder with Driven Tools - Toolholders with cylindrical shank according to DIN 69880: 12 positions – BMT65 - Number of positions: 12 - Maximum tool length including holder: 200 mm - Maximum speed: 6,000 rpm - Maximum torque (10% duty cycle): 27 Nm, (100% duty cycle): 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 100 A - Connected load: 36 kVA Dimensions - Overall dimensions: Length = 5,300 mm (with chip conveyor), Width = 2,300 mm, Height = 3,650 mm - Weight: 9,000 kg Main Features and Capabilities: - Vertical design for optimal chip removal and easy workpiece loading/unloading Knedpsxxkgpjfx Afdsb - CNC control: GE Fanuc FS 32i B - High positioning accuracy on X and Z axes: ±0.001 mm (Heidenhain linear scales) - Main spindle: High power output and wide speed range - In-process measurement: Marposs T25 measuring probe - Automated loading/unloading: EMAG O-Type. Parts are loaded and unloaded via integrated automation - Driven tool capability extends machining operations to drilling and milling - Chip conveyor, coolant unit, switchable double cartridge filter, high-pressure pump (15 bar) - Tool life monitoring with sister tool management - Completely enclosed work area with workstation lighting - Documentation: Electronic version available; printed version incomplete Machine status: NOT WORKING - Requires replacement of hydraulic actuator and electrical motor - Live tool motor needs attention

Condition: used, Year of construction: 2002, Hopper hopper hydr. slide valve actuation with 3-way unit hydr. Telimat / boundary spreading unit in good condition! / Knedpfx Afjtp I Idjdeb

Condition: used, mileage: 14,512 km, power: 250 kW (339.91 HP), first registration: 11/2015, fuel type: diesel, overall weight: 17,500 kg, axle configuration: 2 axles, brakes: retarder, color: orange, gearing type: automatic, emission class: euro5, total length: 7,260 mm, total width: 2,500 mm, total height: 3,260 mm, Year of construction: 2015, Equipment: ABS, air conditioning, all wheel drive, compressor, electronic stability program (ESP), had accident, soot filter, MAN TGM 18.340 4x4 automatic, 250 kW/340 hp, with selectable all-wheel drive and locking differentials in the front and rear axles - GIMAEX TLF 4000 fire engine. Chassis equipment: * R134A air conditioning with automatic temperature control * Single tires 395/85 R 20 on split-rim wheel 10.00 x 20 * 4x4 all-wheel drive - front axle selectable * Differential lock in the front axle with buzzer * Differential lock in the rear axle * Wading depth up to 650 mm * Wheelbase 3600 mm * Rear overhang 1775 mm * 12-speed automatic transmission ZF 12 AS 1210 OD MAN TipMatic (ZF 5 HP 592C i=3.43-0.83) with retarder * Auxiliary drive with flange on the right * Transmission software for off-road use (Tipmatic OFFROAD) * Suspension: leaf spring/leaf spring * Permissible total weight 18 t, rear suspension: parabolic spring 11.5 t * Hydraulic power steering * Axle ratio i=6.00 * Oil pan for climbing ability up to 30% Knodpozgp H Dsfx Afdeb * Comfort electrical package for the cab * Painted front bumper * Engine brake with additional actuation via the brake pedal * Rear crossmember for trailer coupling * Quick start system for special vehicles * Multifunction display in the cab * Cab rear wall without window * Heated and electrically adjustable rearview mirrors * Wide-angle mirrors on the left and right, heated and electrically adjustable * Curb mirror on the right, heated and electrically adjustable * Blind spot camera on the right * Additional long-range and fog lights * MAN CD 24V radio * MAN Tronic * Cruise control * Electrically operated door window lifts for driver and passenger * Central locking * Passenger comfort seat for 2 people (individual seats) * Driver comfort seat with air suspension, lumbar support, shoulder adjustment, and heating * ABS * Drum brakes front and rear * Parking brake on the front axle * MAN BrakeMatic * Steering wheel adjustable in height and inclination Superstructure: * GIMAEX TLF 4000 * Superstructure: modular "AluPrime" construction with roller shutter system, divided into a front equipment compartment module, a water/foam agent tank, and a rear pump module * Fire extinguishing agent supply: * 5000 liters of water * 200 liters of Class A foam * 300 liters of Class B foam * Firefighting equipment: One Seven System: OS C3-111 * Roof monitor: Rockett GF 5 RF mounted on ALCO extension * Built-in pump: Gimaex FPN 10-2000 EN 1028-1 * Operation via CAN bus control * Quick-attack hose reel: S25/50m Ready-to-use vehicle with accident damage, see pictures, cab only slightly damaged on the roof (roof panel is screwed on and can be replaced), engine/axles/transmission not damaged, vehicle starts and runs normally! Fixed price! Errors and changes excepted!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) Ksdpfsyzumzex Afdjnb - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 600 mm, turning diameter: 570 mm, spindle bore: 79 mm, Error message: Actuator not operational lots of accessories Knjdpfxox Sw Uvj Afdob

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this Knodpjwhdnhsfx Afdsb hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Ksdpfxozpbazs Afdonb Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Coil straightening machine 30.400/9 Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Measuring display: metric Setting accuracy: 0.01 mm Straightening roller bearing: needle bearing Bearing sealing: shaft seals Straightening roller hardness: HRc 60 Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Condition: good (used), Electromechanical actuator for valves, valve drive, actuator, servomotor -Valve drive, continuous control signal, position feedback -Type: Siemens SKC60 -steady input signal -Maintenance-free electro-hydraulics Knjdpfjb H Ebksx Afdob -Hand adjustment and position indicator Technical specifications: -Runtime (control mode): open 120 s, close 20 s -Nominal stroke: 40 mm -Adjusting force: 2800 N -Operating voltage: AC 24 V -Power consumption: 24 VA/18 W -Control type: DC 0...10 V, DC 4...20 mA, 0...100 Ohm -Weight 10 kg -Number: 1 pieces available -Price: per piece

Condition: used, mileage: 2,86,233 km, power: 250 kW (339.91 HP), first registration: 02/2014, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, color: white, gearing type: automatic, emission class: euro5, loading space volume: 5 m³, loading space length: 4,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, parking heater, * Sun visor * ABS * Auxiliary heater * Cruise control Knodsyyrr Ejpfx Afdeb * Electric windows * Electrically adjustable mirrors * Mirror heating * Roof hatch * Rear window * Air-suspended driver's seat * Longitudinal and transverse differential locks * Transfer case * Off-road reduction gear * Off-road driving program * AP axles * Steel bumper * Amber beacon * Elevated air intake * Trailer hitch * 2-line air connection * Folding underride guard * 12-speed * Suspension: leaf springs * Payload: 7,900 kg * Constant brake: engine brake ----Special bodywork: Crane: Atlas 120.2 E-A2, foldable, radio remote control + elevated operator platform for remote control, 2-stage hydraulic extension, fully hydraulic outriggers, 6th + 7th control circuits for rotary actuator and grab operation. Load chart (as read): Lifts 5.55 t at 1.9 m; 3.26 t at 3.7 m; 2.2 t at 5.4 m; 1.68 t at 7.1 m.----Superstructure: Meiller 3-way steel pallet tipper, raised front wall, spring-loaded side boards left and right, lashing eyes. Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. Our General Terms and Conditions (see Legal Notice) form the basis of all sales contracts, invoices, pro forma invoices, orders, and sales discussions.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT22001014840, empty load weight: 4,000 kg, maximum load weight: 16,000 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, total length: 9,975 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Year of construction: 2026, Equipment: center pivot plate, Archive photos - actual vehicle may differ #Container locking system 2 pairs of locking hooks recessed into the floor Pneumatic actuation Low-tension locking system, clamping force 6 t per claw Genuine original for 30+ years 2-point internal container locking; skip containers with internal ridge not lockable (for skip containers with sub-frame to DIN 30722, rear-loaded) Note: push container fully flat at the front roller recess Longitudinal guide rails, laterally adjustable/removable, approx. 115 mm high Turntable with heavy-duty ball-bearing slewing ring 8 pairs lashing points, top/side, outer frame, 5 t each 7 pairs combi stake pockets, bolted ring eyes, 5 t each, outer frame, approx. 72x42 mm (usable w/ plug-in stakes; fitted stakes block 5 t eyes) 1 lockable plastic tool box, W=600 / H=425 / D=460 mm Kjdpfx Afjzy Rw Rodjnb 1 open storage box for container net Turntable trailer towing gear Drawbar with certified 40 mm tow eye Lowerable Y-shaped drawbar, pneumatic raise/lower assist (for Absetzcontainer transport, rear-loaded) #Axles & suspension BPW or SAF drum-brake axles, manufacturer's choice Laser-aligned axles/running gear - reduces tyre wear and fuel use Axle grease points extended outward Air suspension with raise/lower valve Air-bellows pressure gauge #Wheels & tyres 235/75 R 17.5, manufacturer's choice Steel wheels, twin arrangement, factory silver TPMS to ECE R 141, shown via EBS on tow display, no truck install (pre-equipped; standard tyres only) #Braking system 2-line air braking system Spring-loaded parking brake Axle load detection via EBS CAN-bus, cab display; truck pre-equipped, no install (not a calibrated scale) Vehicle driving stability system Front Duomatic connection, with line to towing vehicle 24V EBS electronic braking system, front EBS connector and cable Caution: tow only with vehicles that guarantee ABS effectiveness #Electrics 24V LED multi-chamber lamps; yellow LED side lights; LED plate light (false diagnostics possible on some tow vehicles) Yellow LED side lights coupled with indicator (flashing side lights) 2 white LED front position lights 2 white/red LED rear outline marker lights 1 x 15-pin front connector, with connecting cable Parking sockets for electrics, air and EBS on the drawbar Additional rear LED work light, via reversing light LED beacon with mount, switched via sidelight (lamp removable) LED work lights both sides, via reversing light #Floor Steel floor Front roller recess in floor for skip containers 5,000-7,000 mm long Note: slight floor waviness possible due to welding distortion #Loading ramps Lockable storage space for loading ramps beneath the load bed 1 pr aluminium ramps ca. 3,000x450 mm, 14,000 kg/pair (not for steel chains/tyres; rear rail) #Country of registration / plates Country of registration: Germany With Dekra inspection and report (per §13 EG-FGV) Contour marking, reflective tape to ECE R 048, white sides/red rear

Condition: used, This listing is for the Agilent 34970a Data Loger Switch Unit The unit is in full working condition and is ready for immediate use Key Features: 3-slot mainframe: Knjdpfxoxhfcds Afdsb Supports up to 60 2-wire channels using plug-in modules. Built-in 6½-digit DMM (Digital Multimeter): Measures voltage, current, resistance, frequency, and temperature. Plug-in Modules Available: e.g. 34901A (20-channel multiplexer), 34902A (16-channel actuator), 34908A (40-channel single-ended multiplexer), etc. Interfaces: GPIB and RS-232 standard (USB via adapter). Logging Capabilities: Can log data over time for test/monitoring applications. Scan Rates: Up to 250 channels/sec depending on configuration. User Interface: Front-panel controls with LCD display. Remote control via SCPI commands. Typical Applications: Environmental monitoring (temperature, humidity) Functional test systems Data logging in labs Automotive and aerospace test setups Industrial process monitoring

Condition: used, Year of construction: 2024, For inquiries regarding the attachment, Mr. Herden is available to assist you (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. rotary actuator / Year of manufacture: 2024 / DEMO machine / in stock & immediately available / very good condition Price: €33,490.00 net / €39,853.10 gross Working width: 125 cm Total width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as along roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches shrubs and wood up to 30 cm Ø - Suitable for excavators from 13 to 30 tonnes - For mounting to various adapter plates - Drive designed for hydraulic motor depending on the carrier machine’s flow rate - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front chain guard - Rear chain guard - Height-adjustable skid shoes in sandwich design, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools and tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST angle-axis piston motor - With automatic displacement regulation 60–80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60–80 - Required pressure in bar (min-max): 200–350 - Required hydraulic flow rate: 80–170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood Optional: Verachtert CW20/30/40 adapter plate incl. bolts and installation = €2,510.00 net The rotor requires 3 hydraulic lines: supply, return, and leakage oil. An additional hydraulic circuit is required for the hood. The unit is supplied without hoses or connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Knodpfjyltvbsx Afdjb Our warehouse has a very large selection of various Seppi M. products that are ready for immediate delivery! Mr. Herden is happy to assist you by phone. Upon request, we can also provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in...

Condition: used, mileage: 1,33,000 km, power: 480 kW (652.62 HP), first registration: 06/2022, empty load weight: 15,770 kg, maximum load weight: 32,000 kg, axle configuration: > 3 axles, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: steel, load capacity: 16,230 kg, Equipment: Bluetooth, air conditioning, central locking, cruise control, fridge, onboard computer, rear view camera, • Dual-bin KH Tipper, 13 m³ • 2 hatches • Manual tarpaulin cover • Hydraulic BAE (battery electric actuation) • Funnel-shaped extensions • Rear-view camera • ROCKINGER hitch • Vertical exhaust • Storage box Knedezqhfaspfx Afdsb • Fog lights • Air conditioning • GPS • Heated seat • Differential lock • Rotating beacons • Refrigerator

Condition: excellent (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, machine/vehicle number: C 2202067, Pallet Box Tipper 120x80x90 Allows you to empty the contents of a pallet box fitted with wooden extensions. A pneumatic cylinder system locks the pallet onto the tipper. Maximum pallet weight to be tipped: 1000 kg. This ROTOVID 135° box tipper, model RV135, is ideal for completely emptying the contents of your boxes. With a 135° rotation, it allows efficient rotation and emptying of your containers. FEATURES OF THE ROTOVID 135° BOX TIPPER: Knedpfsxfg A Tjx Afdeb - Rotation and return controls via hold-to-run push buttons - Side and rear safety guards - Electrically actuated check valves at cylinder exits - Floor fixing brackets - Receptacle size adaptable to your requirements - Fixed containment barrier - Customizable discharge height - Light curtains compliant with European standard ISO 13855 - Discharge chute - Fixed retaining bar - Discharge flap - HDPE coating - Protective grilles compliant with European standard ISO 13857 - Designed and manufactured in France

Condition: good (used), Year of construction: 2006, functionality: fully functional, Specifications (See Details above for installed options) *Assembleon Philips Topaz Rated CPH Optimal placement rate: 14,000 cph Simultaneous pick Nominal placement rate: 9,000 - 11,000 cph *Applicable Components: 0402 - SOP, SOJ, PLCC 25 mm (1.0") with Line Sensor Camera QFP 21 mm with pin pitch down to 0.65 mm (25 mil) Line sensor camera system QFP 32 mm (1.26") with pin pitch down to 0.5 mm (20 mil) Optional area CCD camera system *Max. component height: 6.5 mm *Philips Topaz Mounting accuracy: (x,y) 3s 0.08 mm for chips and SOIC Line sensor camera system 0.06 mm for QFPs Using Precision Head and optional Area CCD camera system *Mounting angle: 0 up to ± 180 (steps of 0.01) *Alignment system: Line sensor camera with front lighting system for Vision-on-the-Fly image processing by VICS 2500 proprietary vision system -Second Line sensor camera for rear side is optional -Area CCD camera for fine pitch components Optional -Area CCD camera for fiducial alignment Standard *Type of nozzles: Type 31 Type 31-1 (Precision Head only, spring loaded) Type 32-2 Type 33 Type 34 Type MELF -The nozzle types for Topaz and Emerald are the same. *Nozzle exchange station: 12 nozzle positions Optional (No nozzles included) *Number of heads: One single beam with 8 exchangeable nozzles Including one Precision Head *Placement heads actuation method: Pneumatic or servo controlled for component height compensation *Number of Tape Feeders: 8 mm: 100 positions 12 mm: 48 positions 16 mm: 48 positions 24 mm: 32 positions 32 mm: 32 positions 44 mm: 24 positions 56 mm: 18 positions Stick feeders: Depends on stick dimensions Bulk feeders: 100 x 8 mm positions General Specifications *Component Packaging: Tape according to IEC/EIA-J/JEDEC: 8-56 mm Tape reel diameter max: 380mm (15") *Manual Tray feeder: Max. tray size 320 mm x 320 mm (12.6" x 12.6") Optional: Manual tray feeder *Fixed Manual Tray Feeder: Max. tray size 635 mm x 136 mm (25" x 5.3") Optional: Fixed manual tray feeder (Max. board size 250 mm (10") -Optional 558 mm x 508 mm (22" x 20"). *PCB Thickness: Min. 0.6 mm (0.02") Max. 3.0 mm (0.12") Kedpfx Aeznmfajfdenb *Non-mountable area: -Board Top side: 3 mm from rear side board edge (0.12") 0 mm from front side board edge 3 mm around reference holes (0.12") (for locating pins) Component height restrictions apply in the 10 mm (0.4") area from front side edge depending on board thickness -Board bottom side: 5 mm from front and rear side board edge (0.2") For Ceramic boards (optional) the non-mountable area can be different *PCB Material: Phenolic/FR4/Composite Materials Ceramic boards require special conveyor sections (optional) *PCB Positioning: Locate pin fixation Adjustable Push up pins Adjustable Edge clamping Adjustable Sub stop (PCB waiting buffer) Adjustable *PCB Transport height: 900 mm ± 10 mm (35.4" ± 0.4") Standard SMEMA 953 mm ± 12.5 mm (37.5" ± 0.5") Standard *PCB Ratio width/length: Max. 1:3 *Philips Topaz Machine dimensions and weight: Length: 1655 mm (5.4 ft) Height: 1865 mm (6.1 ft) Width: 1358 mm (4.5 ft) Width including feeders 2194mm (7.2 ft) Weight: 1150 kg (2535 Lbs)

Year of construction: 1990, operating hours: 443 h, condition: used, 1990 | Extec 5000 | Used Screen | 443 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 16000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 58 inspection points 43 approved ✅ 5 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the screen. The engine compartment protective covers are not mounted; however, the seller has them and they will be included in the sale. The tensioning and folding cylinder of the walls do not work. No presence of stabilizer. The condition of the belts is good, some appear dry and the connections are sometimes damaged. Wear on the Matic tires is significant. Engine starts with a booster. The electrical part does not work. Presence of seepage on an actuation valve for movements. The paint is damaged in some areas. The exhaust outlet is not secured. The starting battery is out of service. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40008 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Knedpfxjyambgo Afdob ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2013, functionality: fully functional, DECKEL MAHO PFRONTEN GMBH DMG MORI DMU 60 eVo Universal Machining Center Travel X/Y/Z: 600 / 500 / 500 mm Standard Spindle Speed Range: 20 – 14,000 rpm Motor Spindle: 18.9 / 14 kW (40/100% duty cycle) Standard Tool Holder: SK40 to DIN 69871 Control: Heidenhain iTNC 530 HSCI Operator Interface: SmarT.NC Control Panel: DMG ERGOline Control Display: 19" NC Swivel Rotary Table Clamping Surface: 600 x 500 mm B-Axis Swivel Range: -5° to +110° C-Axis: 360° Table Loading Capacity: 400 kg Direct Measuring Systems Table Cooling Spindle Version: 20 – 18,000 rpm Tool Holder: HSK-A63 to DIN 69893 Tool Magazine: 60 positions Magazine Type: Chain magazine with double gripper Heat Exchanger for Spindle and Table Active Cooler for Control Cabinet Direct Position Measurement System Full Enclosure Cabin 3D Control Touch Probe: Heidenhain TS 649 DMG 3D quickSET Toolkit Preparation 3D quickSET Software Option 5-axis Machine Configurations Signal Light: Four-color Preparation for Handling System: PH 150-8 Chip Conveyor: Scraper belt chip conveyor with cleaned slotted screen Internal Coolant Supply (IKZ) Paper Band Filter: 40 bar / 231 l/min / 600 l tank Rotating Viewing Window Pressure Air Seal Linear Measuring Systems Bed Flushing Flushing Gun for Chip Removal Blow Air Through Spindle Center Selection via M-function Serviced Air with Low Oil Content Power Failure Safety Package Overvoltage Limiter Undervoltage Monitoring with Fast Braking Actuation Operating Mode 4 Production Process Monitoring Documentation: German Screen Text: German / English DMG / MORI SEIKI Messenger DMG Netservice Client Automation: DMG PH 150-8 Pallet Loading and Unloading System with Handling Unit and Pallet Magazine Rotary Storage: 8 positions Servo Axes: 2 Z-Axis: Pneumatic Gripper Arm / Fork Knedpsyzamajfx Afdjb IPC with Touch Panel DMG Automation Job Manager Graphical Operator Guidance Signal Light: 4-color Integration Kit: For DMU 50 / 70, DMU 40 / 60 / 80 eVo linear Chuck: Erowa UPC P Pallets: Erowa UPC 320 x 320 mm Number of Pallets: 8 Hole Grid: 50 mm Z Support: Steel Interface: Profibus Standard Automation Electrical Interface Version 4.0 Safety Door and Emergency Stop Signals Robot Side Machine Gross Weight: 11,000 kg Machine Net Weight: 9,500 kg Machine Dimensions: 400 x 280 x 315 cm IKZ Package Gross Weight: 800 kg IKZ Package Net Weight: 650 kg IKZ Dimensions: 200 x 175 x 190 cm Chip Conveyor Package Gross Weight: 640 kg Chip Conveyor Package Net Weight: 590 kg Chip Conveyor Dimensions: 355 x 140 x 170 cm Transport Traverse Package Gross Weight: 200 kg Transport Traverse Package Net Weight: 200 kg Transport Traverse Dimensions: 210 x 80 x 50 cm