Used Akbend Ahs 25/08 for sale (20,644)

Condition: new, round material 40 mm tube diameter 70x2 mm square material 80x30x3 mm L-beam 50 x 5 mm I-beam section - upend 50 x 15 mm roll diameter 157 mm I - beam section - flat steel 80 x 16 mm Shaft diameter 50 mm bending speed 2,95 m/min total power requirement 1,1 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1000x950x1450 mm Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable Kdedpfx Apsyv Nk Rsden - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, sheet width 3100 mm plate thickness 6 mm pre-bending 5 mm upper roll diameter 200 mm min. bending diameter Ø 300 mm bending speed 5 m/min total power requirement 5,5 kW weight of the machine ca. 4.000 kg dimensions of the machine ca. 4800x1300x1270 mm Kdsdpfsyv Nf Iox Apdjn

Condition: new, sheet width 1050 mm plate thickness 3,3 mm pre-bending 3,0 mm roll diameter 90 mm min. dia. 130 mm total power requirement 1,1 kw weight of the machine ca. 570 kg dimensions of the machine ca. 2100 x 800 x 1130 mm Domestic equipments: Kdsdpfxeyv Nfbj Apdjn - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, sheet width 1050 mm plate thickness 1,8 mm Ksdpfx Apjyv I U Iedsdn pre-bending 1,5 upper roll diameter 70 mm min. dia. 105 mm total power requirement 1,1 kW weight of the machine ca. 320 kg dimensions of the machine ca. 1700x700x1100 mm

Condition: new, table diameter 900 mm table load 1.000 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1,1 UpM T-slots 6 x M16 Kedjyv I Rispfx Apdedn Tilt Angle 90-180-105 ° Tilting Speed 30 sn min./90° dimensions 2100x920x1100 mm weight of the machine ca. 930 kg

Condition: new, sheet width 1050 mm plate thickness 1 mm Kedpfx Apjyvvn Aodedn roll diameter 56 mm dimensions of the machine ca. 1600 x 700 x 1050 mm Domestic equipments: - Upper roller can be swung out manually

Condition: used, mileage: 1,96,620 km, power: 185 kW (251.53 HP), first registration: 01/2014, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,080 mm, Equipment: ABS, air conditioning, crane, soot filter, IVECO 120E25 Eurocargo flatbed + HIAB XS 088 crane 4x2 Wheelbase: 4.80 m Suspension: leaf-air Payload: 3600 kg HIAB crane Type: 088E-5HIDUO 5x hydraulic extensions 2x hydraulic support legs 5th + 6th function control Various equipment: - rear view camera - 3-seater - electric windows - spare wheel - towbar with ball coupling Kedpfx Asy N Hacepdedn We are also happy to assist you with financing/leasing through our partners. All information subject to change. Errors and prior sale excepted.

Condition: excellent (used), For sale: Professional measuring set from the Japanese company Mitutoyo, model SBM-25CXST (cat. no. 568-925). This set is designed for precision measurement of hole diameters and cylindrical parts in the range from 12 to 25 mm. Set contents: Mitutoyo ABSOLUTE Digimatic digital bore gauge with LCD display; Three measuring heads: 12–16 mm, 16–20 mm, 20–25 mm; Setting rings: Mitutoyo 19.997 mm and HK66 19.001 mm; Extension rods and additional accessories; Original Mitutoyo wooden case with custom foam insert. The ABSOLUTE system ensures stable measurements and no need for re-zeroing every time the device is switched on. Digital readout provides quick and reliable measurements with high accuracy. The set is in very good condition, complete and ready for use. Ideal for measurement laboratories, quality control, and tool workshops. Kdsdpfjw R E Hvex Apdsn

Condition: new, KSB Centrifugal Pump ETANORM SYT ETNY065-040-200 NEW 2024 25.6 m3/h 46 m For sale: high-quality centrifugal pump from the renowned German manufacturer KSB, model ETANORM SYT ETNY065-040-200. The unit is brand new, unused warehouse stock, in original KSB packaging. Perfect for industrial applications in water installations as well as heating and cooling systems. TECHNICAL DATA Manufacturer: KSB Model: ETANORM SYT ETNY065-040-200 Kodpfsywu Uqjx Apdodn Capacity Q: 25.6 m³/h Head H: 46 m Rotational speed: 2,950 rpm Impeller diameter: 187 mm Casing material: EN GJS 400 15 Year of manufacture: 2024 Flange connections CONDITION New, unused, warehouse stock May have minimal storage marks Original KSB packaging APPLICATIONS Industrial installations Water circulation pumps HVAC systems Heating and cooling installations Pumping stations

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Kdjdpoy Hgi Sofx Apden Weight: 240kg The machine has an adjustable table for block and booklet stitching.

Condition: used, functionality: fully functional, empty load weight: 3 kg, Distribution container, 45 liters, 600x400x275 mm Internal dimensions: 528 x 328 x 238 mm Closed bottom Closed sides Solid handles Container color: gray With a two-part hinged lid, black Pallet of 96 pieces: €8.80 Delivery to the Netherlands, Belgium, Germany, and the rest of Europe. Transportation costs are available upon request and depend on the order volume and the distance to the delivery address. Pick-up in Gemert (NL) is also possible. Kjdpfx Ajt T Dt Sspdodn Please contact us via email, WhatsApp, or phone.

Condition: good (used), Year of construction: 1999, Lg 33922 Unwind-straightener combination Kdedpfx Aehuwacjpden SOPREM BRH 7-200-80U-1250 BAP strip width max. 200 mm Coil weight max. 1,250 kg Spreading range approx. 380 to 430 mm Coil outer diameter max. 1,300 mm Strip thickness approx. 0.8 to 3 mm Working direction from right to left

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, power: 3.42 kW (4.65 HP), load capacity: 540 kg, lifting height: 6,000 mm, lifting power: 540 kg/m, platform length: 2,270 mm, platform width: 1,120 mm, overall weight: 1,990 kg, transport length: 2,480 mm, transport width: 1,150 mm, transport height: 1,700 mm, construction height: 2,230 mm, fuel type: electric, tire size: 381 x 127 mm, tire condition: 100 %, wheelbase: 1,870 mm, === KEY SPECIFICATIONS === Year: 2025 Operating hours: New machine / delivery and test hours Machine width: 1.15 m Drive system: 2WD / two-wheel drive Drivable at full height: Yes Extendable platform: Yes Power: 3.42 kW Working height: 8.00 m Platform height: 6.00 m Platform capacity: 540 kg Platform capacity on extension: 113 kg Drive type: Electric Battery type: Lithium battery, maintenance-free Battery: 28.8V / 175 Ah Battery charger: 100–240V AC, 8.5A Platform dimensions: 2.27 x 1.12 m Platform extension: 0.90 m Tyre type: Non-marking Tyre size: 381 x 127 mm CE certification: Yes Weight: 1,990 kg Indoor / Outdoor use: Indoor and outdoor use Max. occupants: 2 persons + 380 kg equipment === HIGHLIGHTS === Brand-new Magni ES0812AC+ electric scissor lift High 540 kg platform capacity 8.00 m working height and 6.00 m platform height Only delivery and test hours Lithium battery system, maintenance-free Drivable at full height Kdsdozbht Hjpfx Apdon Extendable platform with 0.90 m extension Non-marking tyres, suitable for paved surfaces Compact transport height of only 1.70 m CE certified and ready for immediate use === CONDITION === Brand-new machine in unused condition. Only delivery and test hours. Battery tested and in excellent condition. Ready for immediate operation. === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery possible. Price on request / EXW, excluding VAT. Brand-new Magni ES0812AC+ electric scissor lift with 8.00 m working height and 540 kg platform capacity. This compact electric scissor lift is designed for construction, logistics, maintenance, installation and facility work on paved surfaces. With its high platform capacity, non-marking tyres and electric drive, it is suitable for both indoor and outdoor applications. The machine is equipped with lithium batteries, proportional controls, automatic braking system, tilt alarm, emergency lowering system, platform load sense system and an extendable platform for improved working reach. CE certified, clean and ready for immediate use. === DELIVERY === Crane loading possible on request for smooth transport. Flexible shipping options available depending on destination and logistics requirements. All transport can be professionally handled by the Collé Rental & Sales logistics team.

Condition: excellent (used), Year of construction: 2001, GIETART CM 2500-825. INFEED LENGTH 16.5 METRES. OUTFEED LENGTH 21 METRES FEED OPENING: 2600mm x 400mm / 2200-1100mm TURBINES: 8 POWER PER TURBINE: 18.5KW THROUGHPUT SPEED: 0.4-4 m/min and 15m/min AVERAGE FEED RATES for BSa 2.5: 2-2.5 m/min for sheets 1.2-1.6 m/min for profiles. 1-1.2 m/min for structural components. SUITABLE FOR BLASTING SHEETS: Max width 2500mm Min thickness 7mm PROFILES: BEAMS Max 1000 x 300mm STRIPS Min 60 x 8mm TRANSPORT LENGTH Min 2000mm TRANSPORT WEIGHT MAX 1000 kg/m1. Ksdjzcd Dkepfx Apdjdn

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total height: 8,025 mm, total width: 3,405 mm, total length: 2,810 mm, load capacity per storage section: 250 kg, construction height: 50 mm, warranty duration: 12 months, Equipment: safety light barrier, Table preselection control with article management. Device comes from a lift system. Side shaft claddings have been retrofitted. No side access door. 4 units available. Machine height is adjustable. Storage lift including delivery, installation, DGUV acceptance & warranty. Kedpow S Udyjfx Apdedn

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device Kedsyvvrhjpfx Apdedn - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, sheet width 2050 mm plate thickness 4,5 mm pre-bending 4,0 mm min. dia. 210 mm roll diameter 140 mm weight of the machine ca. 1530 kg dimensions of the machine ca. 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Kodpfx Asyvvrbepdjdn Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, sheet width 1250 mm plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg range L-W-H 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment Kedpfsyvvpyjx Apdjdn - Digital display for back roller - induction hardened rolls

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm Kjdpfx Apeyvvniodsdn tube diameter Ø 70x2 mm roll diameter 155 mm bending speed 4,3 m/min Shaft diameter 50 mm total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, plate thickness 4 mm roll-body distance 260 mm throat 500 mm distance between roll centers 132 mm tool adaptor 40 mm speed 5 m/min total power requirement 2,2 kW Kodoyvvncopfx Apdjdn weight of the machine ca. 350 kg dimensions of the machine ca. 1650x700x1280 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Kodpfx Asy N D E Aepdedn Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, total height: 6,000 mm, total width: 1,750 mm, total length: 2,820 mm, load capacity per storage section: 500 kg, construction width: 1,300 mm, warranty duration: 12 months, – Tabular control panel with item management – Unit comes from a lift system – Side lift shaft cladding reproduced – 2 units available – 1300x825mm tabular panel, 500kg payload each Ksdpfezaqibsx Apdsdn

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, power: 3.42 kW (4.65 HP), load capacity: 250 kg, lifting height: 10,000 mm, lifting power: 250 kg/m, platform length: 2,270 mm, platform width: 810 mm, overall weight: 3,150 kg, transport length: 2,480 mm, transport width: 830 mm, transport height: 2,050 mm, fuel type: electric, tire size: 381 x 127 mm, tire condition: 100 %, color: red, === KEY SPECIFICATIONS === Year: 2025 Operating hours: 0.1 h Machine width: 0.83 m Drive system: 2WD / two-wheel drive Drivable at full height: Yes Extendable platform: Yes Power: 3.42 kW Working height: 12.00 m Platform height: 10.00 m Platform capacity: 250 kg Platform capacity on extension: 113 kg Drive type: Electric Battery type: Lithium battery, maintenance-free Battery: 28.8V / 150 Ah Battery charger: 100–240V AC, 8.5A Platform dimensions: 2.27 x 0.81 m Platform extension: 0.90 m Tyre type: Non-marking Tyre size: 381 x 127 mm CE certification: Yes Weight: 3,150 kg Indoor / Outdoor use: Indoor use only Max. occupants: 2 persons + 90 kg equipment === HIGHLIGHTS === Brand-new Magni ES1208AC+ electric scissor lift Only 0.1 operating hours 12.00 m working height and 250 kg platform capacity Lithium battery system, maintenance-free Drivable at full height Extendable platform with 0.90 m extension Compact 0.83 m machine width Non-marking tyres, ideal for paved surfaces and indoor applications Equipped with platform power socket and on-board diagnostics CE certified and ready for immediate use === CONDITION === Brand-new machine in unused condition. Only delivery and test hours. Battery tested and in excellent condition. Ready for immediate operation. === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery possible. Price on request / EXW, excluding VAT. Kdsdpfx Apeza Sw Teden Brand-new Magni ES1208AC+ electric scissor lift with 12.00 m working height and 250 kg platform capacity. This compact paved-surface scissor lift is designed for indoor maintenance, installation, logistics, construction and facility work. With a machine width of only 0.83 m, non-marking tyres and electric drive, it is ideal for use in warehouses, halls, workshops and other clean working environments. The machine is equipped with lithium batteries, proportional controls, automatic braking system, tilt alarm, emergency lowering system, platform load sense system and an extendable platform for improved working reach. CE certified, clean and ready for immediate use. === DELIVERY === Crane loading possible on request for smooth transport. Flexible shipping options available depending on destination and logistics requirements. All transport can be professionally handled by the Collé Rental & Sales logistics team.

Condition: excellent (used), For sale: Professional fire-fighting pump METZ TS 8/8 manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The equipment is in very good visual and technical condition and comes from a fire brigade unit. The pump is powered by a Volkswagen type 122 engine with 25 kW output, renowned for its durability and ease of maintenance. A significant advantage is its low operating hours—approximately 66 hours, which is exceptionally low for equipment of this type. Kdsdpfxjyt H R Ue Apdsn Technical specifications • Manufacturer: METZ Feuerwehrgeräte GmbH • Model: TS 8/8 • Standard: DIN 14410 • Year of manufacture: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump capacity: 800 l/min at 8 bar • Operating weight: approx. 190 kg • Hour meter: approx. 66 hours Equipment • Pressure and vacuum gauge • Hour meter • Work lights • Firefighting quick couplings • Transport frame • Choke and throttle control Application • Volunteer and professional fire brigades • Water transfer from ponds, rivers, and wells • Agricultural operations • Fire-protection systems • Dewatering and water management duties Robust German engineering—very durable and easy to service.

Condition: used, Year of construction: 2001, Technical details: Kdedjvbgr Rspfx Apden grinding length: 2500 mm grinding width: 800 mm workpiece height: 800 mm Table movement horizontal: Längshub: 2700 mm Table movement horizontal: Querhub: 800 mm table speed: längs: 1 - 35 / quer: 0 - 3 m/min feed: vertical: 0,001 / quer: 0,0025 mm/Hub magnetic plate size: 2500 x 800 mm Automatic grinding wheel feed: 0,001 mm distance table - spindle center: 900 mm grinding spindle speed: k.A. U/min dimensions of grinding wheel: 400 x 76 x 127 mm total power requirement: 36 kW weight of the machine ca.: 13,5 t dimension machine xH: 7,5 x 2,8 x 2,7 m dimension coolant device LxWxH: 1,8 x 1,0 x 0,92 m dimensions of hydaulic: 1900 x 800 x 1500 mm transport measurements machine: L: 8,0 x B: 2,4 x H: 2,85 m The machine is currently in the technical department. technical features: -Hydraulic unit -dressing device *