Used Akta Process Sample Pump for sale (28,955)

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Kodezz Tm Repfx Af Hsdt Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2020, overall weight: 224 kg, Vacuum pump / vacuum system Kdodpjxcb Ixefx Af Het Volume flow rate: 280 m3/h Final pressure: 0.1 mbar Motor: 5.5 kW Vacuum tank: 500 L

Year of construction: 2005, condition: good (used), Demag 1100/470-430 tons pump (2005) Kjdpfx Ajzw D D Eof Hedt

Year of construction: 2005, condition: used, Used Machine Year of Manufacture: 2005 Features and Technical Specifications: - Auertech BL 100A log-house milling machine - H&M feed and positioning table with pusher - For producing chalet corner joints by milling all four sides of the log beam in a single clamping operation - Machining performed by 2 vertical and 2 horizontal milling spindles - Machining dimensions: 140 × 200 mm - Milling shafts: 30 mm - Cutter dimensions: maximum 4 × 220 × 100 mm - Motor power: 2 × 4.0 kW and 2 × 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, infinitely variable, with rapid traverse - Operation: two-hand control or via PLC control - Milling depth adjustment: via spindle with SIKO counter - Workpiece clamping device: 2 × vertical pneumatic - Dust extraction: underfloor extraction hood, 160 mm - Complete with electrical system, PLC control, and pneumatics - Equipped with integrated end-grooving unit, horizontal drilling unit, and under-table crosscut saw - Enclosed machine housing with swing-up protective cover, gas spring, and viewing window Horizontal clamps in the machine table: - 2 horizontal clamps - Pneumatic actuation from the front - Automatic clamping cycle via the PLC control system Integrated face milling unit: - Milling spindle: 30 mm - Maximum tool dimensions: 180 × 40 mm - Motor power: 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, infinitely variable, with rapid traverse - Height adjustment: via spindle with SIKO counter - Workpiece clamping device: 1 × additional vertical pneumatic clamping - Integrated with electrical and pneumatic systems Integrated horizontal drilling unit: - With drill guide and splinter guard - Drill diameter: maximum 30 mm, 20 mm included - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: pneumatic, infinitely variable, with rapid traverse for the idle stroke - Height adjustment: via spindle with SIKO counter - Workpiece clamping device: 1 × additional vertical pneumatic clamping - Integrated with electrical and pneumatic systems Integrated under-table crosscut saw: - For automatic operation only - Maximum cutting dimensions: 200 × 140 mm (width × height) - Saw blade diameter: 500 mm - Motor power: 4.0 kW - Cutting speed: 86 m/s - Pneumatic feed - Pneumatic workpiece clamping device - Exhaust funnel: 120 mm - Integrated with electrical and pneumatic systems Kedpfx Aezk Ni Hjf Hsdt Automatic Feeding and Positioning: - H&M feeding and positioning table with side pusher - The log is placed manually on the feeding table; it is then automatically positioned by the side pusher and fed into the machine - Mechanical, pneumatic, and electrical systems on the pusher table - Electrical interface for controlling machine functions - Feed table length: 9,000 mm - Discharge table length: 4,000 mm Tools included: Drill, crosscut saw, and end grooving cutters as shown in the machine photos; grooving cutters as shown in the separate photo

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, GAROS MDF 5600K Kjdpfx Asrzqzusf Hedt ID.NO. 2689 Garos MDF 5600K Vacuum tumbler / Massage tumbler with cooling function. Capacity 5600 liters built-in vacuum pump & associated filling funnel included. Dimensions 520 x 210 cm Height 280 cm.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, AMTEK AMT7510U Kdedpoumbw Ijfx Af Hjt ID.NO. 2801 Amtek mod AMT7510U Microwave / Fry / oven year mod 2010 very nice condition! High capacity defrosts products from the core outwards, it is also possible to fry & cook products with this machine bandwidth 600 mm. Dimensions 1000 x 140 cm Height 200 cm.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, TIPPER TIE SAM3E Kdjdpfx Afju Iw R Ie Hjt ID.NO. 2826 Tipper Tie mod SAM3E double clipper year mod 1995 with revolver system for quick change of format tubes. Dimensions 210 x 115 cm Height 200 cm.

Condition: excellent (used), WOLFKING TSM 400 + DANFOTECH ID.NO. 2842 Wolfking TSM 400 liter paddle mixer with cooling Co2 with associated Danfotech CH 300 meatbin lift. Dimensions 200 x 165 cm Height 270 cm. Height to edge 150 cm. Kdodpfx Asu Ivwtsf Hjt

Condition: like new (used), Year of construction: 2014, functionality: fully functional, GAROS GSI 620 CWP ID.NO. 2880 Garos mod GSI 620 CWP Saltinjector with built-in tenderizer & associated purification plant. Year mod 2014, 4 mm needles width bridge 63 cm. Kdedovpvlpepfx Af Hst Dimensions 300 x 220 cm Height 225 cm.

Condition: used, Suitable for steam heating Kodjz Ahdmopfx Af Hedt capacity 1.600L. all stainless steel double jacket tiltable drum stirring system with spring-mounted scrapers high pressure steam (max. 10 bar) dimensions (l x w x h): ± 4.000 x 2.000 x 2.300 mm + "Berief" Loader for 200L eurobins, Type L25

Condition: excellent (used), Year of construction: 2014, The set on offer is a TREIF TWISTER AT Cube Cutter combined with a STORM engineering loading lift (Hebe- und Kippvorrichtung), forming a complete, automated dicing station. The set additionally includes knife blocks of 6, 8, and 30 mm, allowing different grades of the finished product to be produced without needing to purchase extra tooling. How does the TREIF TWISTER AT with the STORM lift work? Raw material is placed in a transport container, which is raised and tilted by the STORM lift, emptying its contents directly into the loading chamber of the TWISTER AT cutter. Inside the machine, raw material passes through the cutting assembly, where interchangeable knives (a quick tool-change system requiring no additional instruments) cut it into cubes, strips, or slices, depending on the tooling used and the selected cutting program. Control is handled via a touchscreen panel with stored cutting programs, allowing quick switching between settings when changing products or knife spacing. Key advantages of the TREIF TWISTER AT with STORM set The STORM loading lift eliminates manual lifting and emptying of raw material containers, reducing operator physical strain and speeding up the feeding of successive batches into the cutter. Its IP65 protection rating allows the lift to operate under conditions of frequent station washdown. The included set of additional knife blocks (6, 8, and 30 mm) extends the machine’s capabilities to further cube sizes without needing to purchase separate tooling, which matters for plants with frequently changing product ranges. The solid construction of the TWISTER AT cutter, weighing 950 kg, and its power supply suited to a wide voltage range (380–480 V) ensure stable operation across different electrical installations. Technical specifications of the TREIF TWISTER AT with STORM set TREIF TWISTER AT Cube Cutter Manufacturer: TREIF Model: TWISTER AT Description: Cube cutter Year of manufacture: 2014 Capacity: up to 3,5t/h Chamber: 120 x 120 x 550 mm Current type: 3-PE, 50/60 Hz Operating voltage: 380–480 V Control voltage: 24 V Rated current: 15–12 A Supply line fuse: 25 A Rated power: 7 kW / 9.52 hp Weight: 950 kg Included additional knives: 6 mm, 8 mm, 30 mm STORM loading lift (Hebe- und Kippvorrichtung) Manufacturer: STORM engineering Year of manufacture: 2020 Power: 0.8 kW Power supply: 400 V, 50 Hz Protection rating: IP65 Weight: 410 kg Kdodpfx Afozzp S Nj Hot Compliance: CE, ISO 9001-2015, Made in EU Application of the TREIF TWISTER AT with STORM set The set is used in meat processing plants, vegetable product manufacturers, and cheese processing facilities, wherever precise cube cutting of raw material is required alongside improved logistics for feeding raw material into the machine. The ability to quickly change knife spacing makes the set well suited to plants with a varied range of products.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, overall weight: 350 kg, total length: 940 mm, total width: 500 mm, total height: 650 mm, volume flow: 345 m³/h, final pressure: 0.15 bar, power: 5.5 kW (7.48 HP), rotational speed (max.): 3,600 rpm, For sale is a high-performance and highly efficient dry MINK claw vacuum pump from the premium manufacturer Busch, model MV 0312 B. MINK claw vacuum pumps and compressors are the result of the continuous development of claw technology. Decades of experience with this technology in countless applications have led to significant improvements. The MINK claw technology combines performance, reliability, and efficiency thanks to its innovative design. It can be used for both vacuum and compressed air generation. The dry and non-contact operating principle enables virtually maintenance-free operation. MINK vacuum pumps and compressors are ideally suited for industrial applications where constant vacuum or constant overpressure and oil-free operation are required. Data: • Manufacturer: Busch Vacuum Solutions • Model: MV 0312 B • Year of manufacture: 2024 • Condition: Like new, fully functional (last manufacturer maintenance was performed in October 2025) • Location: Graz (Austria) • Technology: Dry claw vacuum pump • Suction capacity (50 Hz): 290 m³/h • Suction capacity (60 Hz): 345 m³/h • Ultimate pressure: 150 mbar (absolute) Kdjdpfxoyxvqve Af Hst • Motor rated power: 5.5 kW (at 50 Hz) / 6.5 kW (at 60 Hz) Pictures/Videos: Original pictures and videos will be provided upon request. Condition and scope of delivery: • Condition: fully functional - last manufacturer maintenance was performed in October 2025 • Includes original motor and base feet (vibration-damping). Terms of sale: • Price: €10,900 excl. VAT (negotiable) • Invoice: Price is quoted net plus 20% VAT. A proper invoice will be issued. Interested? Please contact us to arrange a viewing or to receive a quote.

Condition: used, functionality: unexamined, Ferwood Code: RU0002544 - Manufacturer Code: VTLF 2.250/0-79.1 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer refurbishment services. Please contact us. 235KG 120X80X70 Kdedpfx Asyrphtjf Hst

Condition: used, functionality: fully functional, Ferwood Code: RU0009658 - Manufacturer Code: G-BH12BH1610-7HH36-Z - Condition: Used - Functionality: Fully functional - Weight: 65KG - Dimensions: 120X80X60 - If interested we offer overhaul service, please contact us. Kdsdpfju H Ib Ijx Af Hjt

Condition: used, functionality: unexamined, Ferwood Code: RU0011677 - Manufacturer Code: VT 3.40 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service; please contact us. 38KG - 70X46X34 Kedpfxoyb R Tvo Af Hodt

Condition: excellent (used), Year of construction: 2021, operating hours: 2,10,00,575 h, functionality: fully functional, machine/vehicle number: 21000575, Peristaltic pump ALLMOVE ASH 15 GN-ID/1, year 2021, serial number: 21000575, very good condition Peristaltic pumps of the ASH series from Allweiler have a unique design that allows them to work with the most complex liquid media. They are capable of pumping almost any fluid or very viscous substances, including aggressive agents or flows contaminated with solid or fibrous inclusions. Pumps of this type are widely in demand in many industries as an effective and reliable means of transporting liquids of various natures. The working unit is based on the following design elements: a thick-walled elastic hose for conducting liquids and a rotor with a shoe for pressing and pushing the flow. With this pumping principle, there is no turbulence or emulsification of liquids. Self-priming units are easy to set up and install, with the possibility of reversible operation. Sealing of the drive with a sealing ring. The cooling agent is located directly in the pump body. Pumping liquids: highly viscous substances, containing abrasive, solid particles or fibres, gas-containing, aggressive agents. Application areas: wastewater treatment, chemical industry, paper production, food industry, agriculture, etc. Characteristics of ALLMOVE ASH 15 GN-ID Kdodpfx Afjwhmm Ho Hst • Volumetric flow: up to 60 m³/hour; • Supply pressure (PD): up to 16 bar; • Differential pressure: up to 15 bar; • Liquid viscosity: up to 100,000 mm²/s; • Permissible sizes of solid particles: 5 - 33 mm; • Permissible fiber length: 150 - 820 mm; • Liquid temperature: up to 80 °C; • Installation: dry, horizontal, on a support plate. Price Euro 2.900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Item: F-4001-4008-Jacket40m3Vertical Used vertical jacketed insulated tanks Exterior dimensions: Diameter Ø 3565 mm, Total Height 6951 mm. Vertical, insulated stainless steel process tanks – 8 units. Kdjdpfszg Darox Af Hot Cooling/heating jacket. Top-mounted agitator. AISI 304

Condition: excellent (used), functionality: fully functional, mileage: 72,462 km, first registration: 10/2019, fuel type: diesel, axle configuration: 8x4, fuel: diesel, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 2019, IVECO TRAKKER 500, year 2019, mileage 72,462 km, EURO6, equipped with a CIFA K40C concrete pump, 40-meter boom, 125 mm diameter delivery pipe, and a PU 1607 pumping unit with a flow rate of 160 m³/h. Kjdpfx Afoz Dw T De Hsdt

Condition: new, SKF MKU2-KW6-22003+428 – central oil lubrication unit Original unit from SKF / SKF Lubrication Systems Germany GmbH, designed for central oil lubrication systems. Unused unit – warehouse stock. It has not been used in an installation. Only minor storage marks are visible on the housing and tank. TECHNICAL DATA: • Manufacturer: SKF Lubrication Systems Germany GmbH • Model: MKU2-KW6-22003+428 • Type: unit / gear pump for central lubrication • Power supply: 230 V AC • Frequency: 50/60 Hz • Output: 0.2 l/min • Tank capacity: 6 liters • Tank: plastic Kdjdpfx Aez Alyfsf Hst • Medium: oil • Maximum operating pressure: 30 bar • Connection: G 1/4" • Number of outlets: 2 • Pressure gauge: YES • Pressure switch: YES • Level control: YES • Control: integrated • Protection class: IP54 • Operating temperature: +10 to +40°C • Oil viscosity range: 20–1500 mm²/s • Year of manufacture shown on the nameplate: 35/17 On the nameplate: SKF Lubrication Systems Germany GmbH MKU2-KW6-22003+428 230 V, 50/60 Hz IEC38 Made in Czech Republic The unit is complete, in the condition shown in the pictures. Condition: NEW / UNUSED – WAREHOUSE STOCK. Sold exactly in the condition and configuration shown in the pictures.

Condition: excellent (used), functionality: fully functional, Baader 603 Perforated drum, new price €11,900 3mm Like new condition Kdodpfjz Dvmiox Af Hot Shipping possible

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, 4-5 axis CNC Still in operation Good maintained condition Numerically controlled cutting, drilling, and milling CNC machining center Comes with a 12-position tool magazine enabling various machining processes HSK 63 F tool holders and additional accessories as shown in the photos are included in the machine price Working axis dimensions: X 3400 x Y 1720 x Z approx. 400 mm Vacuum table dimensions: 3120 x 1200 mm Axes: X, Y, Z + rotation + option to purchase angled heads or additional tools Main motor power: 7.5 kW Working speed: 900 – 18,000 rpm Max tool diameter: 140 mm 2 x PC with Windows XP and ROUTOLINK software (second PC is a backup) 2 vacuum pumps Warranty and post-warranty service provided Price includes machine demonstration and operator training Original documentation CE safety standard Year of manufacture: 2001 Overall dimensions: 6865 x 3800 x 2350 mm Weight approx. 6000 kg Ksdpfx Afjvva T Ds Hodt

Condition: excellent (used), machine/vehicle number: -, Year of construction: 2021, input voltage: 400 V, tank capacity: 150 l, Maximum Operating Pressure (bar) 700 Cylinder Compatability Single-acting, Double-Acting Reservoir Capacity (cm3) 150000 Reservoir Capacity (litres) 150 Maximum Flow at Rated Pressure 1,30 l/min Oil Flow per Outlet at 700 bar (l/min) 1,30 Number of Outlets 8 Motor Size (kW) 15 Motor Hertz 50 Hz Motor Phases 3 Ph Motor Voltage 380-415 V Duty Cycle Extended Valve Function Kedpfx Afoqmfq Re Hsdt Advance / Hold / Retract Valve Operation Solenoid Valve Type 4-way, 3-position Power Source Electric Pump Control Pendant Motor Electrical Specification 400 V, 3 Ph, 50 Hz Weight (kg) 590 We have 15 of these hydraulic pumps. Same Condition. You can buy whole or just one.

Condition: used, Breton Sample Line is the line for production of display samples in a wide range of materials and sizes The samples that can be produced on the Samples Line are suitable for marketing and exhibition uses. Kjdpfx Afjxdi Rws Hodt The line can process several materials: quartz, granite, marble, and porcelain stoneware.

Condition: used, functionality: fully functional, Year of construction: 1990, operating hours: 3,151 h, MAN 33 362 DF with Cifa PA1006 35m concrete pump First registered in 1990 - Euro 3 compliant Mileage: 130,000 km (to be verified) Cifa PA1006 35m equipment – pump replaced in 2005 Operating hours: 3151 Tires: 60-70% remaining Good condition Available immediately Kdodpfx Afoz Dbcvj Hjt WE WILL CONSIDER TRADES OF VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: used, functionality: fully functional, Year of construction: 2006, ASTRA HD8 84.45 with Sermac 28m concrete pump First registered in 2006 – Euro 3 Mileage: 150,000 km Sermac 28m equipment Tires: 50-60% tread Valid inspection certificate Kedsz Dbcijpfx Af Hedt Good condition Available immediately WE ARE WILLING TO CONSIDER TRADING VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, AND SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.