Used Akyapak Section Bender for sale (3,201)

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. Nljdpfx Asz Ru Iyjirjh The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: good (used), Tool grinding machine, grinding machine, angle grinder, turning tool grinding machine, steel grinding machine -Elysier grinding: possible with the machine -Speed: 1500 rpm -Grinding wheel: Diamond grinding wheel -1x angle tables: 220 x 310 mm -Angle adjustment: 15° to -5° -Oscillation: 0-35 mm -Water cooling with: electrolytes -Grinding dust extraction -max. steel cross-section: mm -Number: 1x grinding machine available -Price: per piece Nljdsdz U Tljpfx Airjh -Dimensions: 850/700/H1400 mm -Weight: 580 kg

Condition: ready for operation (used), Year of construction: 1995, Printing machines 2 colour offset printing machine KBA Rapida 72K Year 1994 Serial No. 65802317 Year 1995 Printing sections 2 Size of paper MAX 520 x 720 mm Size of paper MIN 210 x 297 mm Nodpfxeyx Iyvs Airjlh Printing speed 17000 sheets/hour Size of the printing plate 557 x 720 mm Size of the printing blanket 585 x 730 mm Counter 32 mios Current state: In production

Condition: used, Technical details: sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar Nsdpju Icdysfx Airolh -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend -Verstellweg ca. 5mm *

Condition: used, Year of construction: 2004, Technical details: throat: 510 mm working pressure: 250 bar Punching capacity: 1000 kN t round bar steel: bis Ø 65 x 12 und bis Ø 90 x 8,5 mm electr. connected load: 400V / 50Hz total power requirement: 7,5 kW weight of the machine ca.: ges. 2,6 t dimension machine xH: 1,9 x 1,0 x 2,1 m dimensions L x W x H: Wkz.-Schrank: 0,7 x 0,35 x 0,9 m hydraulic section steel shear Heavy-duty, robust electro-hydraulic hole punch with large throat depth -Punching device: punch holder with punch quick-change device up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punching table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment device and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Number of strokes: -with 10 mm stroke = up to 45 strokes/min. -with 30 mm stroke = up to 22 strokes/min. -with 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and stroke position adjustable Equipped with punch Ø 16 mm Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: Various punching tools Punches and dies Njdpju Ick Tofx Airolh i.D. *

Condition: used, Year of construction: 1990, Technical details: total power requirement: 1,5 kw weight of the machine approx.: 110 kg electrics - voltage/frequency: 380 / 50Hz V/Hz dimensions L x W x H: 1,0 x 0,55 x 2,4 m Application: for welding and dust air with filtration Nlodsu Nv Dpepfx Airoh Air inlet: pipe connection Ø 150 x 60mm; intake flexible pipe 2-sectioned Exhaust air: flexible hose Ø 150mm to approx. 5 meters Operation via on/off switch *

Year of construction: 2026, condition: new, Customized roll forming production lines for standard and special steel profiles with turnkey automation solutions. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. Our custom roll forming lines are designed for serial production of sheet metal profiles directly from coil with high precision, repeatability and production efficiency. We manufacture complete lines according to customer profile drawings, production targets and automation requirements. From standard profiles to fully customized sections, Bosporas provides turnkey roll forming solutions including coil feeding, punching, forming, cutting, stacking and automation systems. The systems can be equipped with advanced technologies such as quick cassette change, flexible punching systems, automatic width adjustment and servo-controlled feeding solutions. ⚙️ PROFILE TYPES & INDUSTRIES We manufacture roll forming lines for a wide range of industries and applications, including: Highway Guardrail Production Lines Acoustic Noise Barrier Production Lines Solar Framing & Mounting Profiles C, U and Z Profiles Cable Tray & Cable Ladder Profiles Logistic Warehouse Traverse Profiles Market Shelving Systems Suspended Metal Ceiling Profiles Solar Framing & Mounting Profiles Lighting Fixture Body & Lid Profiles Panel Radiator Top & Side Covers Metal Grid & Industrial Profiles Metal Door & Door Frame Profiles PVC Window & Gypsum Board Profiles Vineyard / Orchard Posts Agricultural Equipment Components Automotive Industry Components Painting Plant Panel Profiles Household Appliance Components Coil Punching Applications Customized Special Profiles ⚙️ ENGINEERING FEATURES Custom machine design based on profile drawing High precision roll tooling design Servo-controlled feeding systems Quick cassette change options Automatic width adjustment options Flexible punching and perforation solutions Heavy-duty machine construction Modular design for future upgrades ⚡ OPERATIONAL ADVANTAGES Complete turnkey production solutions High efficiency serial production from coil Consistent product quality Reduced labor and production costs Flexible solutions for different industries Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Construction industry Storage & logistics systems Solar energy sector Agriculture sector Automotive suppliers White goods industry Metal furniture systems Infrastructure projects General sheet metal manufacturing 🧩 OPTIONAL CONFIGURATIONS Nlodpfxey Anxaj Airjh Fully customized profile design High-speed punching systems Automatic width adjustment Quick cassette change systems Special tooling packages Turnkey factory integration solutions

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 22300 € 428.16 € 1 2030 mm 6 mm 6 mm 5 mm 170 mm 4 kW 3600 mm 1020 mm 1120 mm 2400 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Nlodpfewirursx Airjh Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Nljdjy E Hynjpfx Airsh Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: used, functionality: fully functional, Year of construction: 1971, For sale: this four-roll plate rolling machine, type VRM HY 3000/18. The machine is connected and can be tested. Weight: 24,000 kg. Nodpfx Aexwqdreirelh

Condition: excellent (used), Wide-belt sanding machine KÜNDIG Premium for finishing coats Type Premium 1 1100-C - used - constant working height thanks to adjustable upper section, combined unit with contact roller and sanding pad, contact roller with rubber coating, pneumatic activation of the contact roller, electronic segmented sanding pad, digital display for sanding height, automatic thickness adjustment, infinitely variable feed rate, automatic carpet centering, operation via touchscreen, belt cleaning, air-sprung sanding pad, sanding belt oscillation, workpiece cleaning via compressed air nozzles, table extension at the infeed and outfeed, finishing coats possible ----- Technical data ----- Working width: 1,100 mm, Number of belts: 1 piece, Sanding belt speed: 3 - 15 m/sec., Feed rate: 3 - 15 m/min., Segment width sanding pad: 22 mm, max. workpiece thickness: 205 mm, min. workpiece thickness: 3.5 mm, Dust extraction port Ø: 180 /120 /100 /100 mm, Motor power: 11 kW, Dimensions (LxWxH): 1,660x1,700x2,250 mm, Weight: 2,150 kg Quality information: - Belt run / imbalance checked - Sanding pad checked / refurbished - Height adjustment checked Nlsdpfxszkvd Ro Airjh - Complete thorough cleaning - Electrical system checked - Ready for immediate use

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, power: 1,143 kW (1,554.05 HP), warranty duration: 12 months, # NorthGlass BU1E60 Glass Tempering Furnace – Fully Refurbished – 12-Month Warranty We offer for sale a NorthGlass BU1E60 horizontal glass tempering furnace equipped with a forced convection heating system. The furnace is pre-owned and has undergone a comprehensive refurbishment, including the replacement of major mechanical, electrical, and electronic components. Refurbishment work includes the replacement of: - Heating elements - Ceramic rollers - Electric motors - Automation and control systems - Electronic components The furnace has been fully refurbished and prepared for further industrial operation. Warranty: 12 months. ### Main Technical Specifications - Manufacturer: NorthGlass (China) - Model: BU1E60 - Condition: Used, fully refurbished - Maximum glass size: 2,850 × 6,000 mm - Minimum glass size: 300 × 300 mm - Glass thickness: 5–22 mm - Heating system: Forced convection - Convection system: 6 high-temperature upper convection fans with variable frequency control - Production capacity: 16–18 batches/hour (5 mm clear glass) - Heating power: 1,143 kW - Quenching fan power: 2 × 220 kW - Rated electrical capacity: 1,100 kVA - Minimum Low-E emissivity: ε = 0.04 - Quality standard: GB15763.2-2005 ### Supported Glass Types - Clear float glass Nlodpfx Aioz Rv Dpsreh - Low-E coated glass - Patterned glass - Body-tinted glass ### Equipment Configuration The furnace includes: - Loading table - Heating section - Flat glass quenching section - Unloading table - Electrical control system - Frequency converters - Air circulation system - Quenching fans with vibration isolation frames ### Key Advantages - Fully refurbished with replacement of major components - Advanced forced convection heating technology - Suitable for processing Low-E glass - Large processing capacity of up to 2,850 × 6,000 mm - High productivity of up to 18 batches per hour - 12-month warranty - Cost-effective alternative to purchasing a new glass tempering furnace ### Price and Delivery Price: Upon request Delivery terms and additional technical information are available upon request. Contact us for a detailed quotation, additional photographs, videos, and technical documentation.

Year of construction: 2022, operating hours: 80 h, condition: new, functionality: fully functional, Clextral extruder Type: Evolum EV032 M Njdpfx Aiez S Idksrslh Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Air pressure: 6 Bar Steam injection: 2 - 6 bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 operating hours! Clextral water pump Type: CLX DKM Flow: 6 - 42 l/h Pressure: max. 10 bar Reservoir: 7.5 liters Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Cextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max. 10 bar Reservoir: 10 liters Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam set Type: 2/10 TLV Serial number: SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 bar Maximum pressure: 10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Air pressure: 6 - 10 bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pcs. Tooltemp temperature control unit Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group ploughshare mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 liters Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Immequip screw conveyor Type: ELV 70/80-R Hopper: 150 liters Output: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing system Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling capacity: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Condition: used, machine/vehicle number: #14199, Rotor diameter: 800 mm Rotor width: 1000 mm Number of rotor blades: 7 Nedpfx Aijz Svb Dsrjlh Number of stator blades: 3 Inlet cross-section: approx. 900 x 1000 mm Drive motor: 110 kW

Condition: used, machine/vehicle number: #14195, Rotor diameter: 457 mm Rotor width: 1500 mm Nedpfx Aez Svcbsirslh Number of rotor blades: 102 Number of stator blades: 2 Inlet cross-section: approx. 1500 x 1500 mm Drive motor: 75 kW

Condition: excellent (used), For sale: BOFA ES500i+ industrial fume and dust extraction unit, designed for use with laser equipment. The unit has a metal housing with wheels, a control panel with a display, and access to the filter section. Data from the nameplate: - Model: ES500i+ - Part number: 10069037 - Power supply: 230 V, 50 Hz, 10 A - Year of manufacture: 2017 Nedpfx Aez Spdmeirolh The photo shows the display indicating 4999 operating hours. The visual condition and components of the unit are shown in the photos.

Condition: used, mileage: 563 km, power: 382 kW (519.37 HP), first registration: 10/2026, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 10/2027, brakes: retarder, gearing type: automatic, loading space width: 2,450 mm, loading space length: 4,800 mm, loading space height: 600 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New TG3 municipal truck MAN TGS 18.520 BL 4x4 all-wheel drive tipper with Meiller tipper body and Küpper-Weisser winter service equipment, 22,000 kg technically permissible gross vehicle weight for winter service, with retarder and 520 hp, 68,000 kg technically permissible gross train weight, air conditioning, auxiliary heater, reversing camera, day registration with MAN manufacturer's warranty from the date of initial registration, and more. Equipment: Mileage approx. 563 delivery kilometers 18,000 kg permissible gross vehicle weight 22,000 kg technically permissible gross vehicle weight for winter service Front axle 9,000 kg as an outer planetary axle, driven; rear axle 13,000 kg, HP-1352 Permissible front axle load 9,000 kg, technically permissible front axle load 10,000 kg Increase in load capacity on front axle to 10,000 kg in winter service up to a maximum of 62 km/h Permissible rear axle load 11,500 kg, technically permissible rear axle load 13,000 kg 9,500 kg spring load capacity front axle, 13,000 kg spring load capacity rear axle Winter service hydraulic system, 2-section with screw couplings, Küpper-Weisser 2 hydraulic pumps on the engine, 11 ccm and 22.5 ccm Front mounting plate Rasco type F1/C with hydraulic connections Winter service lighting Heated windshield TGS NN cab, medium length with rear window Wheelbase 3,900 mm Diesel engine MAN D2676 LFAX, 382 kW (520 hp) power with 2,650 Nm torque Engine Euro 6 E All-wheel drive 4x4 Differential lock in front and rear axle Meiller Trigenius 3-way tipper, approx. 4.80 m x 2.45 m x 0.60 m high Floor of tipper body made of steel HBW 450, 4 mm Front wall 0.80 m high Tie-down eyes fully recessed in the floor panel Side walls and rear wall of tipper body, 2.5 mm, M-JET, steel HBW 4500 Rear wall of tipper body, pivoting and folding, with claw lock MAN TipMatic 12.28 OD with retarder 35 Retarder Eco High-performance engine brake MAN EVBec, adjustable Transmission for increased driving torque Transmission function MAN Idle Speed Driving Transmission function Rocking function Transmission function MAN EfficientRoll Transfer gearbox MAN G172 with road and off-road gears Air conditioning, Climatronic Auxiliary water heater, 6 kW Trailer hitch Rockinger type 400 G 150A with Duomatic connection Permissible gross train weight of 44,000 kg Technically permissible gross train weight of 62,000 kg Technically permissible gross train weight of 68,000 kg Permissible trailer load with continuous braking system 33,326 kg Technically permissible trailer load with continuous braking system 44,000 kg Technically permissible trailer load with continuous braking system 50,000 kg Trailer load with semi-trailer coupling/articulated coupling 15,737 kg Tipper hydraulic connections at the rear Front axle leaf-sprung and rear axle air-sprung Axle ratio i=3.63 Stabilizer for front and rear axle Shock absorbers on front and rear axle MAN Comfort Steering Tire pressure monitoring system TMP Electronic braking system EBS Full brake assist Emergency brake assist EBA Front Detection Traffic sign recognition Attention warning system MAN Attention Guard Hill start assist MAN EasyStart ABS ASR ESP Nlodpfx Ais Adw Arsreh Reversing Motion System with reversing camera Cruise control Cruise control function MAN EfficientCruise with PredictiveDrive 310 liter aluminum tank on the right Cool box in the cab Sun visor, exterior Sun blind, door side windows, interior, mechanical 24V battery management system 2 rotating beacons on the cab roof 2 work

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Nsdpfx Aj Aduyzoirelh PRESS DATA Nominal pressing force: 400 kN Stroke frequency: 800 min⁻¹ Ram stroke: 5–50 mm Ram adjustment: 50 mm MATERIAL DATA Material thickness: 1.5 mm Material length: 1–50 mm Strip cross-section: 110 mm (?) Material width: 10–75 mm Strip speed: 45 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD 32-720HS Machine type: Punching machine Year of manufacture: 1994 Machine number: 1829697 Operating voltage: 400 V Frequency: 50 Hz Drive power: 19 kW Length: 3,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 4,000 kg EQUIPMENT Feeder GF50

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Pressing force: 63 t Speed range: 140–800 min⁻¹ Ram stroke: 6–60 mm Ram adjustment: 80 mm Nedo Adzqaepfx Airolh Pin hole diameter: 40 mm Table Table dimensions: 800 × 580 mm Table slots: 6 Feed Feed length: 160 mm Material width: 160 mm Belt speed: 80 m/min Belt cross-section: 500 mm² MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD63-800 Year of manufacture: 1982 Machine number: 282612 Dimensions (L × W × H): 3,500 × 2,400 × 3,000 mm Weight: 6,000 kg EQUIPMENT Feed

Condition: new, mileage: 500 km, power: 265 kW (360.30 HP), overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,450 mm, loading space length: 4,200 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, New municipal vehicle, MAN TGS 18.360 BL 4x4 all-wheel drive tipper truck with Meiller tipper body. Winter service equipment with municipal hydraulics and front mounting plate. New loading crane, Palfinger PK 9.501 SLD with hydraulic 4-section extension, radio remote control, and swivel head and grapple system with 5 + 6 control circuits. Full MAN manufacturer's warranty from the date of initial registration for 24 months up to 100,000 km. Truck specifications: 18,000 kg permissible gross weight 22,000 kg technically permissible gross weight 23,000 kg technically permissible gross weight plus option 9,000 kg permissible front axle load 10,000 kg technically permissible front axle load plus option, increased load capacity on front axle for winter service at max. 62 km/h (including tires up to 15%) 11,500 kg permissible rear axle load 13,000 kg technically permissible rear axle load Dual-circuit municipal hydraulic system Front mounting plate, size F1 Winter service lighting Heated front windshield TGS NN medium-length cab with rear window Wheelbase 3,900 mm Engine Euro 6 e Drive 4x4 Front axle as outer planetary axle, driven, switchable Differential lock in front and rear axle Meiller Trigenius D212 3-sided tipper for loading crane approx. 4.20 m x 2.45 m x 0.60 m high Front wall 0.80 m high Side walls, M-Jet, steel HBW 450, 2.5 mm Tipper bed made of steel HBW 450, 4 mm Load securing with floor and side wall lashing points Tipper side walls, pivoting and foldable Tipper rear wall, pivoting and foldable, with pneumatic claw locking Transfer gearbox MAN G172 with on-road and off-road mode MAN TipMatic 12.26 OD Transmission function MAN Idle Speed Driving Transmission function Rocking mode Driving program MAN TipMatic Performance up to 70,000 kg Driving program MAN TipMatic Efficiency, up to 70,000 kg Driving program MAN TipMatic Offroad, up to 70,000 kg Driving program MAN TipMatic Manoeuvre, maneuvering mode Air conditioning, Climatronic Auxiliary heater, 4 kW Trailer hitch, Rockinger Type 400 G 150A with compressed air connections Tipper hydraulic connection at the rear Front axle leaf-sprung and rear axle air-sprung Front axle 9,000 kg, AP axle Rear axle HP-1352, 13,000 kg, AP axle Nlodpfxozthuas Airjh Stabilizer for front and rear axle Hill start assist MAN EasyStart TPM tire pressure monitoring system with tire temperature display Tire pressure indicator for trailer Preparation for alcohol interlock system Driver attention warning system MAN AttentionGuard Full brake assist system EBA Plus emergency brake assist system Lane departure warning system LDW LCS lane change assist and turning assist MAN Front Detection Distance warning Traffic sign recognition EBS ASR ES Cruise control High-performance engine brake MAN EVBec, adjustable 310 liter aluminum tank on the left Sun visor 2 rotating beacons and 2 work lights Compressed air connection in the cab with compressed air hose and gun Cool box in the cab Rear view camera MAN Reversing Motion System Reversing warning, audible, can be switched off when reversing gear is engaged Multi-function steering wheel MAN EasyControl Engine control panel, 2 functions can be operated from outside when the door is open Electrically adjustable and heated exterior mirrors MAN Media System Advanced 7 inch MAN Sound System Advanced Smartphone integration Preparation for radio with CB radio antenna on the cab roof 24 Volt battery management system Driver and passenger comfort seats, air-sprung with lumbar support, shoulder a

Condition: new, mileage: 500 km, power: 265 kW (360.30 HP), overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,800 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, Municipal new vehicle, MAN TGS 18.360 BL 4x4 all-wheel drive tipper with Meiller and Küpper-Weisser winter service equipment. MAN manufacturer's warranty until 02.12.2026 Equipment: Mileage approx. 441 delivery kilometers 18,000 kg permissible gross vehicle weight 22,000 kg technically permissible gross vehicle weight for winter service 9,000 kg permissible front axle load 10,000 kg technically permissible front axle load for winter service operation up to a maximum of 62 km/h 11,500 kg permissible rear axle load, 13,000 kg technically permissible rear axle load Winter service hydraulics, 2-section system with quick couplings, manufacturer Küpper-Weisser Front mounting plate, type F1/C, according to DIN EN 15432-1 with hydraulic connections Winter service lighting Preparation for additional lighting on the vehicle rear Heated windshield Preparation for 2 hydraulic pumps on the engine, 11 cm and 22.5 cm (for external attachments) TGS NN medium cab with rear window Wheelbase 3,900 mm Engine Euro 6 e Drive 4x4 Front axle as external planetary axle, driven, switchable High configuration Differential lock in front and rear axles Meiller 3-sided tipper, approx. 4.80 m x 2.42 m x 0.60 m high Front wall 0.80 m high Side panels, M-Jet, steel HB 450, 2.5 mm Floor of the loading platform made of steel HB 400, 4 mm Tie-down points fully recessed in the floor panel Side walls of the tipper, pivoting and foldable, deep latches Rear wall of the tipper, pivoting with automatic latch Transfer case MAN G172 with on-road and off-road gears Njdpfx Ajyv Tt Aoirjlh MAN TipMatic 12.26 OD Transmission function MAN Idle Speed Driving Driving program MAN TipMatic Efficiency, up to 70,000 kg Driving program MAN TipMatic Offroad, up to 70,000 kg Driving program MAN TipMatic Manoeuvre, shunting mode Air conditioning, Climatronic Auxiliary heater, 4 kW Trailer coupling, Ringfeder type RF40/G150A with compressed air connections Tipping hydraulic connection at the rear Front axle with leaf springs, rear axle with air suspension Front axle AP 9 tons, rear axle AP 13 tons Stabilizer for front and rear axles MAN Comfort Steering Hill start assist MAN EasyStart Full brake assist Lane departure warning LDW EBS ASR ESP ABS Offroad with additional off-road logic Cruise control High-performance engine brake MAN EVBec, adjustable 390-liter aluminum tank, right side Sun visor 2 rotating beacons and 2 work lights Dustbox in the cab Reversing warning, audible, can be switched off when reversing gear is engaged Reversing camera Multi-function steering wheel MAN EasyControl control panel, 2 functions can be operated from the outside when the door is open Electrically adjustable and heated exterior mirrors Electric windows MAN Media System Advanced 7 inches MAN sound system Smartphone integration Driver comfort seat with air suspension, lumbar support, shoulder adjustment and heating Seat covers in comfort quality Municipal new vehicle with registration date 02.12.2025 Archive images Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2517

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, REX RVF 327 | Vacuum filler with Busch pump Manufacturer: REX Technologie Ges.m.b.H. & Co. KG Model/Type: RVF 327 (RVF 327 F/P/A) Serial number: 2377091111 Year of manufacture: 2011 Power supply: 400 V / 50 Hz Current protection: 3x 16 A Rated power: 5 kW Nsdpfx Aisy Ucikorslh Dimensions: 1150 x 800 x 1200 mm Vacuum pump specifications: Pump manufacturer: Busch Model: KC 0016 E 320 Pump serial number: 1100558454 Pump year of manufacture: 2011 Vacuum capacity: 16 m³/h REX Technologie RVF 327 is a professional, extremely compact, and efficient rotary vacuum filler. This 2011 unit is the heart of a portioning line in small, medium, and large meat, fish, convenience food processing plants, as well as in the cheese and bakery industries. The machine is used for continuous, highly precise portioning, filling, and twisting of various types of fillings and masses. The use of an integrated, reliable German vacuum pump from Busch with a capacity of 16 m³/h allows for effective degassing of the filling before the filling process. As a result, the final product has a compact structure, and there are no air bubbles in the cross-section (which significantly increases the shelf life of the products), as well as perfect, consistent meat coloring. Key features and benefits: - Paddle-type filling transport system: The gentle, rotating mechanism ensures that the filling's structure is not crushed or smeared, which is crucial in the production of coarsely ground sausages, cabanossi, or burgers. - High-quality vacuum (Busch): The dedicated Busch KC pump ensures the optimal vacuum level in the loading chamber, providing stable operation even with thick and demanding masses. - Versatility and flexibility: The RVF 327 model works perfectly with peripheral devices such as twisting mechanisms, casing holders, automatic clippers, or hanging systems. - Intuitive control: The machine is controlled by a microprocessor panel, which allows for precise programming of portion weight, pauses, twisting time, and correction of the first portion.

Condition: used, Pillar Jib Crane DEMAG Type KBK 2 Year of manufacture: 1979 Nedpfx Aioxtq Amorslh Load capacity: 500 kg Slewing range: 270° Outreach: 3200 mm Overall height: 3250 mm Jib length: 3100 mm Height to underside of jib: 2730 mm - Jib profile DEMAG C-section rail KBK 2 - Trolley for DEMAG C-section rail KBK 2 - Base plate of crane pillar is no longer original L x W x H = 450 x 450 x 25 mm with cut-out (4 holes Ø approx. 28 mm) Dead weight: 270 kg Good condition

Condition: used, mileage: 1,75,500 km, power: 346 kW (470.43 HP), first registration: 11/2021, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, MAN TGS 26.470 BL – RO-RO TIPPING TRAILER – VEHICLE HISTORY * Well-maintained! * German vehicle * Video of the vehicle available upon request (interior & exterior views) ----Vehicle Data Manufacturer: MAN * Model: TGS 26.470 * First registration: 17.11.2021 * Emission class: 66DO * Fuel: Diesel * Engine displacement: 12,419 cm³ * Power: 346 kW (470 hp) * Automatic transmission * Mileage: 175,500 km * Operating hours: h Weights & Dimensions Permissible total weight: 26,000 kg * Technically permissible total weight: 28,000 kg * Maximum speed: 90 km/h Chassis & Axles Axle 1* Leaf spring suspension * Tires: 315/80 R22.5 Axle 2* Air suspension * Tires: 315/80 R22.5 Axle 3* Air suspension * Steerable axle * Lift axle * Tires: 315/80 R22.5 Superstructure Ro-Ro Tipper * HYVA container system * Type: LS20.60 S * Year of construction: 11/2021 * Serial number: * Maximum load: 20 t * Maximum working pressure: 350 bar * Max container length 7m * Min. container length 4m Coupling System * Ringfeder trailer coupling Drive & Technology * Auxiliary drive (PTO) * Limiter * Speed adjuster Comfort Features Automatic climate control * Heated seats * Navigation system * Electric windows * Heated exterior mirrors * Sunroof (manual) Safety & Assistance Systems ACC adaptive cruise control * Lane keeping assist * Rear view camera * Hill start assist * Differential locks * Rocking mode ----EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATES AND 17 - 21 DAYS AUSTRIA LICENSE PLATES EURO 1 VEHICLE RESERVATIONS PLEASE ONLY VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU & third countries, a deposit of at least €500.00 / €1,000.00 will be charged. (For sales to the EU and third countries will be levied deposit/guarentee of at least € 500.00 / € 1000.00) Changes, errors and prior sale subject to change! You can find more vehicles on our homepage: Sale is exclusively based on our general terms and conditions – see homepage Important note - Important information: Despite careful checking of all details in our offer, it may happen that errors creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics. Nlsds Afb U Ijpfx Airoh

Condition: as good as new (ex-display), Demonstration machine Robust band saw for logs up to 71 cm in diameter with extendable rail sections—extension is unlimited. Automatic feed with continuously variable speed. Electric height adjustment controlled from the operator panel. 3.8-inch touch LCD display for height adjustment. Saw unit suspended on both sides for increased stability and improved precision. CE certified. Technical data: Max. log diameter: 71 cm Max. board width: 67 cm Motor output S1: 5.5 kW Cutting length, base version: 2.1 m Cutting length, extension section (optional): 3 m, 1 m Weight: 550 kg Nlodpfjvr I Rcox Aireh Extras not included in the price (sample image).