Used Amtec Rotary Horizontal Packing Machine for sale (67,759)

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm Dcjdpst Hwxbofx Anqoi max. module 4,5 min. module total power requirement 20 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Dodpfx Anet Hw D Roqoci Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 630 mm z-travel 560 mm total power requirement 60 kW weight of the machine ca. 12.5 t dimensions of the machine ca. m H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _____ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features * 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides. * Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto the table, where it is automatically clamped and machined. * 40-position tool magazine with tool replacement door, and laser-operated tool breakage control. * Internal high pressure coolant supply, 50 bar. * Coolant preparation unit with filter and temperature control. * Oil mist exhaust. * Separate cooling aggregate for motor spindle and switch cabinet. * CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials. The new price in 1998 was approx. 1.3 million DM (EUR 650,000.00). The machine is very suitable for medium-sized production series. Ideal for aluminium. Dedpfx Ajt Hwrhonqoci

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Dcodpju Su Apjfx Anqji Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2000, grinding length 1600 mm grinding width 600 mm Djdot Hxcbepfx Anqeci workpiece height 500 mm total power requirement 50 kW

Condition: used, Year of construction: 2010, weight of the machine ca. 0,2 t Dedpfx Aswr Etysnqjci

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Dcedpfx Anot Hwzisqsi Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: new, Year of construction: 2026, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10mm/sec Return speed: 20mm/sec Work table: 660x1250 mm Working height: 900 mm Oil tank: 60 Liter Maximum workpiece height: 250 mm Strip capacity: 200x26 mm Dcodpfx Aohgihkonqji Pipe capacity: 60x5.0 mm *not with standard tools - Digital limitation of the stroke and the return stroke. - NC control. - Hydraulic pressure adjustable - Bending speed adjustable - Completely closed table - The ZOPF construction makes it possible to change tools quickly and without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, which means that even under heavy load there is no loss of accuracy occurs. - With the universal tool holder and the various tools, you can work extremely flexibly.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Dcedpfx Anjzc D Ensqei Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: good (used), Year of construction: 2008, Ref. -No.: 10335 Manufacturer: HüLLER HILLE Type: NBH 170 Year of construction: 2008 Type of control: CNC-Steuerung Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: RPM Dcsdpfx Aozc Dylenqsi Rapid Traverse: 60 m / min Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Further information: Coolant system = 1250 l

Condition: good (used), Year of construction: 2014, Machine will be delivered without conveyer belt and weighing. Dedpfx Aewt Tuhenqsci

Condition: new, Year of construction: 2026, functionality: fully functional, The basic components of the grinding machine include: base, slides, column with grinding wheel spindle, rotary table, and control cabinet. The table is driven by a mechanical transmission and a gearbox-frequency converter unit, and performs a rotary motion. The rotary speed of the table is adjusted using a potentiometer on the machine's control panel. In manual operation, the machine will have the ability to perform pulsed rotary movement of the table, controlled from the operator's panel. The transverse feed is performed by the column and spindle moving along the rolling guides of the base. This movement is realized using a ball screw with a belt drive and an asynchronous motor controlled by a frequency inverter. The vertical feed is performed by the spindle moving along the sliding guides of the column. A ball screw is used to drive the vertical feed. The continuous feed of the column is stepless. These values are set from the control panel. The machine will be equipped with a direct digital readout on the vertical axis with a resolution of 0.001 mm. An electronic handwheel for vertical axis feed during manual operation and an operator panel (programmable display) will be placed on the operator's panel. The grinding machine will have smooth adjustment of the grinding wheel spindle speed and the table speed. The machine will be able to operate in an automatic cycle with the possibility of programming the number of sparking passes and other parameters necessary for grinding in an automatic cycle. Safe operation of the grinding machine is ensured by a semi-enclosed cabin and all electrical and mechanical safeguards in accordance with CE standards. Dcodpfx Aezfyvysnqei 1 Table working surface Ø800 mm 2 Maximum distance between the table surface and the spindle axis during manual spindle feed 350 mm 3 Minimum distance between the table surface and the spindle axis 125 mm 4 Maximum weight of the workpiece 2500 N 5 Range of steplessly adjustable table speed 2-100 m/min 6 Maximum horizontal column feed 450 mm 7 Range of steplessly adjustable column feed speed 0.2 – 3 m/min 8 Grinding wheel feed per: 1 encoder unit 0.001 mm 9 Minimum automatic grinding wheel feed 0.001 mm 10 Maximum automatic grinding wheel feed 0.040 mm 11 Speed of accelerated grinding wheel feed 1 m/min 12 Grinding wheel spindle speed 1000 – 2500 RPM 13 Diameter of new grinding wheel 400 mm 14 Diameter of worn grinding wheel 250 mm 15 Bore for mounting the grinding wheel 127 mm 16 Width of grinding wheel nominal / maximum 50 mm

Year of construction: 1997, condition: used, grinding length 1250 mm grinding width 350 mm workpiece height 450 mm CNC control Sinumerik 840D rotary table dia. 1200 mm Table dimensions 2 x (760 x 325) mm longitudinal stroke 800 mm vertical movement of grinding slide 450 mm cross movement of grinding slide 350 mm Distance table / spindle centre (horizontal pos.) 600 mm grinding motor 50 kW grinding wheel size 400 x 160 mm feed range (X /Y/ Z) 30 / 3 / 3 m/min min. input value 0,001 mm turning speed range 200 - 4000 U/min total power requirement 82 kVA weight of the machine ca. 16 t dimensions of the machine ca. 7,00 x 3,30 x 3,00 m Dcjdpod Tcnlsfx Anqoi Machine is sold as partially overhauled! MAEGERLE MGC Series are famous about various unique features: -Smooth slow and fast column motion and accurate positioning -Thermal stability by hydrostatic return oil circuit through machine base -Super precision -High stiffness and rigidity -Main spindle motor KESSLER 50kW. Our MGC is equipped with 180° swivel table diameter 1200 mm(FIBRO) and travelling column. The reason is to be able to make parts handling during the grinding operation. Accessories: Table dressing device, KNOLL HF 500/4000 water filtering unit with high pressure pump

Condition: used, Year of construction: 2004, Horizontal machining center Manufacturer: Makino Type: a51-A60 Year of manufacture: 2004 Control: CNC FANUC System 16 iM Travel distances: X/Y/Z: 560 x 560 x 500 mm Distance from table center to spindle nose: 70 – 570 mm Maximum swiveling height from pallet surface: 900 mm Dcodszc Ifrspfx Anqji Permissible swiveling range in the work area: 630 mm Tool magazine: 60 tool positions Maximum load weight: 180 kg T-command, 4 digits, freely assignable Tool change time: 0.9 sec. Maximum tool dimensions: Ø 70 mm, 360 mm long Maximum tool weight: 8 kg Spindle unit 50 – 12,000 rpm Spindle unit with tool holder for tapered hollow shanks according to DIN 69893 HSK-A63 Tool clamping force: 29 kN Pallet changing system, integrated into the machine Pallet change time: 7 sec. Pallet changer with storage of 2 pallets in alternating sequence on a storage station Pallet holder rotatable, indexed 90° division 0-position electrically controlled. Permissible load weight max.: 400 kg Pallet size: 400 x 400 mm High-speed machining Contour milling with feed rates up to 40,000 mm/min. Function can be used for milling in 3 axes X, Y, and Z 2 ½ axis operation (X/Y axis circular, Z axis linear) for thread and curve milling Direct thread cutting by synchronizing the feed drive of the Z-axis via pulse encoder in the spindle motor Maximum speed: n = 4,000 rpm Feed drive with AC servomotors Rapid traverse speeds X, Y, Z axis = 1 … 50,000 mm/min. Feed rates X, Y, Z axis = 1 .. 40,000 mm/min. Manual operation, freely movable, via direction keys Coolant system Chip and splash protection central chip/flush system Machine light All-round flashing beacon, 3-color Total weight: 7,800 kg Space requirement approx.: 11.5 m2 Overall height approx.: 2.7 m 2 machines available! 2726

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The machine is in good technical condition. X-axis travel: 900 mm Y-axis travel: 500 mm Z-axis travel: 450 mm 4 axes Fanuc FS31i control system Table: -External length 1000 mm -External width 500 mm -Table load 1000 kg Dodpfszgvzbsx Anqsci New electric spindle installed 4 years ago. Tool magazine for 30 tools, including tool holders. The machine operated on a single shift. Inspection during operation is possible by prior arrangement.

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 18966, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area, X-axis: 3,309 mm Working area, Y-axis: 1,703 mm Working area, Z-axis: 120 mm Table length: 3,100 mm Table width: 1,500 mm Number of milling spindles: 1 Number of controlled axes: 3 Tool clamping system: HSK-F63 Tool changer positions: 12 MACHINE DETAILS System/Software: BiesseWorks Capacity: 360 m³/h Dcjdjzdy S Sepfx Anqoi Connection diameter: 70 mm Vacuum: 300 bar Main motor power: 11 kW Power consumption: 24 A Power: 14.2 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,350 x 2,000 mm Empty weight: 1,530 kg Transport packages: 2 Vacuum pump Busch MM 1322 A VM8 Year of manufacture: 2012 Main motor power: 6 kW EQUIPMENT CE marking CE certificate Documentation (Electrical diagrams, parts list, technical data, user manual (NL, paper form)) Safety fence, safety light curtain Milling table: Flat table Material clamping system: Pneumatic

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: AA1/015406, functionality: fully functional, operating hours: 14,808 h, working width: 1,300 mm, spindle speed (max.): 24,000 rpm, working height: 200 mm, working length: 3,110 mm, No minimum price – guaranteed sale to the highest bidder! The machine is still in operation and can be inspected while powered on. TECHNICAL DETAILS Working area X-axis: 3,110 mm Working area Y-axis: 1,300 mm Working area Z-axis: 200 mm Dedezdy E Sepfx Anqeci Maximum travel X-axis: 3,500 mm Maximum travel Y-axis: 1,815 mm Maximum travel Z-axis: 440 mm Table length: 3,050 mm Table width: 13 mm Number of milling spindles: 1 Spindle speed: 600 - 24,000 rpm Number of controlled axes: 5 Horizontal drilling spindles: 6 Vertical drilling spindles: 12 Tool changer positions: 16 MACHINE DETAILS Main motor power: 11 kW Main motor power of the vacuum pump: 5.5 kW Capacity of the vacuum pump: 250 m³/h Dimensions & Weight Dimensions (L x W x H): 9,000 x 2,450 x 2,850 mm Installed dimensions (L x W x H): 4,600 x 6,500 x 3,400 mm Shipping dimensions: 9,000 x 2,450 x 2,850 mm Empty weight: 4,000 kg Shipping packages: 1 unit Operating hours: 14,808 h EQUIPMENT Milling table: Beam table Tool clamping system: HSK-F63 Material clamping system: Pneumatic Drilling tool Saw unit System/Software: Xilog plus Safety feature: Safety mat Vacuum pump: Becker CNC options: Chip conveyor, Hand control CNC documentation: User key/licenses

Year of construction: 2009, condition: ready for operation (used), Equipment: height-adjustable conveyor, lid sorting and feeding system, conveyor belt with infeed and outfeed section, stainless steel construction, safety enclosure with interlocked safety doors, integrated electrical control cabinet and operator panel, the machine is designed to process Pano TO 100mm PP HOmao closures without liners. Inspection on site is possible. Djdpozhw Tnsfx Anqeci

Year of construction: 2004, condition: good (used), Bagging machine which has been packing leeks and potatoes. Djdpfx Aeu S R Dtsnqeci

Condition: good (used), Toyo Jidoki pouch packing machine with vacuum option. Has come from major UK food factory but not used for at least five years. Dsdpfxeuf A Ide Anqjci

Condition: excellent (used), Year of construction: 2014, Rarely available for sale, GEA Comas Tartomatic 1000 in beautiful condition. Has not been used very much. Comes with many accessories as shown in the photographs. Dodpjvd Elnofx Anqeci

Condition: good (used), Machine has been filling jams, honey, sweet mincemeat into plastic catering size tubs. Was then feeding into two separate lidding lines which can be available separately. Dcjdpferdzbtex Anqei

Condition: excellent (used), Commonly used for Babyfoods, purées, sauces, cocktails, dysphasic meals, cleaning products etc. Dedpfx Aneyzcvqoqjci

Condition: used, Year of construction: 1999, x-travel 1250 mm y-travel 910 mm z-travel 875 mm Control Siemens type 840 D size of pallet 800x800 mm numbers of pallets 2 turning speeds 20-6000 U/min Dedpfx Aoyqu D Ronqeci transmission ratio 2 Feed 1-32000 mm/min 360x1 ° turning speeds 16,5 U/min Table load 1150 kg spindle taper ISO 50 Tool changer 165 Pos. weight of the machine ca. 18,5 t IKZ 70 bar B - NC rotary table The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Number of boring spindles 1 St. Boring depth max. 150 mm Motor output 1,8 kW Götzinger HR 150 - Hoffmann system ----- The machine that gives you the highest precision when drilling two levels guaranteed. Frame and slot drilling machine, enables drilling in two levels in one clamping. - Well thought-out, precise and practical stop system - particularly smooth and play-free grid positioning, Feed and transverse adjustment - Guidance systems for the highest demands - Special drill chuck - precise, quiet concentricity - for drilling levels via digital display - Two side stops offer enormous advantages, center stop on request - Continuous front stop with position markings - Drilling pattern depending on the wood profile - free choice, in a 12 mm grid Special grids also possible - integrated dust extraction - the exchangeable additional equipment (e.g. drill heads, Miter stops, parapet railing device, side and folding stops) can be easily installed without tools. and dismantle. Technical data: Drilling unit ----- Height adjustment in 2 levels via digital display Height adjustment 100 mm pneumatically Drilling stroke/depth 150 mm by hand Transverse adjustment 320 mm via grid Drilling pattern width 12 mm pitch, standard Three-phase motor 230/400 V, 50 Hz, 1,420/2,840 rpm, 1.3-1.8 KW Tool holder ----- Special drill chuck with 2 tool changing inserts 1 x M10, 1 x D 16 stop system ----- Dcjdpfx Aoytx T Ijnqei 2 side stops can be swiveled in/out 1 longitudinal stop (tube) with adjustable folding stop approx. 1500 mm Elongated hole stop left and right Workpiece clamping ----- pneumatically via foot valve Dust extraction Special accessories - see PDF attachment ----- Price of the above mentioned machine on request! ----- Recommended accessories (additional charge): Two-jaw chuck 2–20 mm, replacement part: EUR 648.00 Chassis: EUR 295.00 2 workpiece support arms (left/right), approx. 800 mm, swivelling: EUR 1,298.00 ----- (technical data according to manufacturer - no guarantee!)