Used Becker/Schelling Plate Storage for sale (17,475)

Condition: good (used), Year of construction: 2005, Vacuum Pump Dcedswx Hzrspfx Aa Njg Manufacturer: Becker Type: VTLF 250 Year of manufacture: 2005 Volume flow: 250 m³/h Vacuum: 200 mbar Power: 5.5 kW

Condition: used, Cast iron bed Djdpowtc Hgsfx Aa Nocg Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Dsdpewlhd Usfx Aa Njcg Weight: approx 4,5 T

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Dcjdpeh Auahjfx Aa Neg Weight: approx 3 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Dcjdpjwlhflsfx Aa Neg Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: refurbished (used), The overhauled vacuum pump is available from stock and ready for immediate use. We recommend installation only by trained personnel. Adapter kits available on request. Technical data: 50Hz – 244m³/h – 5.5 kW – 340-430 / 588-745 V – 15-16/8.7-9.3 A 60Hz – 286m³/h – 6.4 kW – 340-500 / 588-866 V – 16.8-15.3/9.7-8.8 A 200 mbar absolute Final pressure: approx. 200 mbar Subject to prior sale! Dcjdpfogq Uvbex Aa Njg This offer is valid only for customers within Germany and other European countries!

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber Dcedjw Hhwwepfx Aa Njg • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: excellent (used), functionality: fully functional, Three mild steel storage bins previously used for storing coffee beans. Total of three separate bins capable of holding around 6.5 m3 each, Dimensions: Height 6m x Width 1.45m x Length 4.9m Dcsdpfx Aexcyl Noa Neg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 11. Becker Vacuum Pump – TLF 250-2 (2012) Dry-running rotary vane pump used for extraction, vacuum pick-up, or material handling. Key Features: Dcodpfxsx Ekvaj Aa Neg • Dry-running (no oil required) • Approx. 250 m³/h capacity • Includes motor • Twin filter housings Reliable German engineering Price: £3,500

Condition: good (used), functionality: fully functional, Complete plywood manufacturing line including: 1 BUERKLE compounding line year 1991 with BUERKLE roller gluer length 3400 mm + 1 OLM long-wire sender + 1 OLM cross-wire sender + 1 assembly table. 1 press loading basket with 10 positions. 1 BVH 10-stage press with thermal oil heating platens. Djdeul Uizepfx Aa Nscg - Platen size: 3700 x 1900 - Platen thickness: 40 mm - Opening between platens: 75mm - 1 central cylinder D700 mm, max. hydraulic pressure 315 Kg/cm². 1 press unloading basket with lateral evacuation pushers on lifting table. Line currently in operation, available second half of 2025.

Condition: new, Year of construction: 2025, For customers only from the Baltic countries: Lithuania, Latvia, Estonia. The CIDAN RAPIDO guillotine is a fast and reliable metal cutting machine. Depending on the length of the processed metal, guillotines of different working lengths are offered: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Cutting thickness: 3.5 - 1.5 mm. The guillotine can perform up to 35 cuts per minute. The drive system with eccentrics, the lowering bars for holding the cut sheet and the system that presses the material during cutting are installed only 2.5 cm from the knives, which allows you to easily, quickly and conveniently cut narrow strips. RAPIDO guillotine shears have corner supports on both sides of the table, ensuring that the material is fed into the machine at a right angle, and LED cutting zone lighting, thanks to which you will clearly see the cutting line. Backrest and control system CUTLINK CUTLINK is a fast, reliable and easy-to-use program that allows you to simultaneously enter up to 10 different operations. The backrest automatically adjusts itself according to the entered parameters. As standard, the guillotine is equipped with a 750 mm deep backrest, but if necessary, a 1000 mm backrest can be selected as an option. Sheet support and return To achieve maximum control, the back sheet support is pneumatically controlled. This allows you to adjust the sheet feed speed depending on the type of material being processed. After cutting, the sheet support lowers the material into the return carriage (forward return). If necessary, the sheet return function can also be selected as an option. Djdjwd Ebzepfx Aa Njcg If you have any further questions, we will always be happy to consult you by phone or invite you to inspect the machine live.

Condition: used, Year of construction: 2001, Electric guillotine R.A.S with mechanical rear support, fully operational, available for testing. Specification: Model: R.A.S 52.30 Year: 2001 Manufactured in: Germany Working length: 3 100 mm Shearing thickness max: 2.0 mm Rear support: mechanical 770 mm Weight: 1950 kg Other: forward sheet metal drop. If you have any further questions, we will be happy to answer them. Dcsdpfxettv Ecj Aa Njg

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 28450 € 543.4 € 1550 mm 7 mm 7 mm 4.5 mm 4.5 mm 3.5 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 3750 mm 960 mm 1100 mm 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Dcodpoyb Szhofx Aa Njg (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, sheet width 1600 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 140 mm lower roll diameter 140 mm side roll diameter 120 mm min. bending diameter Oberwalzen-Ø x 3 total power requirement 3 kW weight of the machine ca. 2.000 kg Overall size 3700x1300x1280 mm Accessories / equipment: Dodpfoyv N E Usx Aa Necg - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 2100 mm plate thickness 40 mm pre-bending 30 mm upper roll diameter 390 mm lower roll diameter 360 mm side roll diameter 300 mm total power requirement 22 kW machine weight ab. 17200 kg Overall size 5060 x 2200 x 2180 mm Dedpfx Aaoyv Nt Es Necg

Condition: new, sheet width 3100 mm Dcjdpfx Ajyv Nh Nsa Njg plate thickness 13 mm pre-bending 10 mm upper roll diameter 300 mm lower roll diameter 270 mm side roll diameter 210 mm total power requirement 11 kW Overall size 5600 x 1800 x 1500 mm weight of the machine ca. 8.800 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 10 mm pre-bending 8 mm upper roll diameter 270 mm lower roll diameter 250 mm side roll diameter 210 mm total power requirement 11 kW weight of the machine ca. 7750 kg Djdpfxjyv Nhcj Aa Nocg Overall size 5600x1450x1600 mm

Condition: new, sheet width 2100 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 160 mm lower roll diameter 140 mm side roll diameter 120 mm total power requirement 2,2 kW Overall size 4140x1040x1140 mm weight of the machine ca. 2.350 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) Dcodpsyv Nf Uofx Aa Neg - Calibration

Condition: new, sheet width 2100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 230 mm lower roll diameter 210 mm side roll diameter 190 mm total power requirement 7,5 kW weight of the machine ca. 4.750 kg dimensions of the machine ca. 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers Dcodsyv I Ubopfx Aa Nog - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 16 mm pre-bending 13 mm upper roll diameter 330 mm lower roll diameter 300 mm side roll diameter 240 mm total power requirement 11 kW Overall size 5600x1650x1900 mm weight of the machine ca. 10.600 kg Accessories / equipment: Djdpeyv I Smjfx Aa Nocg - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Year of construction: 1991, condition: used, Storage tank, insulated, stainless steel, cooling jacket for glycol cooling. Additional title: double-walled tank (coolable) Capacity: 1300 l Width: 1300 mm Height: 2300 mm Formats: Flat conical Dcsdjy N Edtepfx Aa Njg Operation / Control: Manual Material: stainless steel 1.4301 Position: vertical Base construction: on 4 feet Features: double-walled with full jacket cooling, with sampling tap, pipe connections; connections: Outlet DN50, cooling line DN20

Condition: used, Year of construction: 1998, gebraucht 1998 090148 prompt, Zwischenverkauf v Belgien 24900 € 1 3100 mm 6 mm 0.5 - 3.5 ° 9.5 kW 950 mm 4070 mm Dcsdpeyackwsfx Aa Nog 2330 mm 3400 mm 1850 mm 5500 kg Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrier Foot pedal Table supports with ball bearings 1 side arm 1500 mm 2 support arms Operating manual in German with CE declaration of conformity

Condition: new, Year of construction: 2025, Swing cut guillotine shear Cutting length 3100mm Material thickness steel 10mm Knife for stainless steel Touch control Cybelec backgauge 1000mm Dedpfx Aaslac Drj Nscg Cutting gap adjustable via control Delivery time 3 months

Condition: used, machine/vehicle number: 005107, Stock dimension length: 18800 mm Stock dimension width: 15000 mm Dsdpfxeiiipue Aa Nscg

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: 4axis autocalc, number of rollers: 4, roller (bottom) diameter: 240 mm, roller (top) diameter: 250 mm, side roll diameter: 180 mm, roller diameter: 300 mm, roller length: 4,100 mm, working width: 4,000 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, power: 5 kW (6.80 HP), input voltage: 400 V, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, model capacity 4000x6 mm CNC EVO plate roll Hydraulic 4 roll plate bending machine used year 2017 plate thickness rolling 6 mm pre-bend 4 mm minimum rolling diameter ID 300 mm plate max width on the rollers 4100 mm top roll size 250 mm lower roll 240 mm side rolls 180 mm Power on hydraulic unit 5,5 kw Vac 400/50 -480/60 Dedpfxoy I Sp Tj Aa Nocg Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted with CNC EVO 4 axis Automatic plate roll programmable on drawing import from CAD station Rolling compensation upon plate different yield strength data input Hydraulic rotation central rolls driven Parallelism of the 4 rollers lifetime with torsion bar Pre-pinch setting upon plate real strength for best pre-bend Drop-end open front for unloading closed shells Re-rolling system for welded shells precise calibration. Safety and emergency stop installed Manuals and schematics service and instruction books