Used Bekomat Ecoair Condensate Drain for sale (1,570)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Gbodpoy Hkd Hsfx Aqwsp Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Gbedpozizghofx Aqwop Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: Gbodpfx Aqjzizdyjwsp - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Gbedpfx Aqjziycbewjp Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, NEW Equipment for feeding defrosted fish raw materials to the blanching area Equipment for blanching fish raw materials - Provide mechanized or manual delivery of fish raw materials (arranged in one or more layers) to the heat treatment area; · Provide heat treatment (blanching) liquid of fish raw materials (a mixture of water, salt water, water vinegar) or in a steam environment; · The speed of the blanching conveyor is variable; · The blanching temperature is adjustable (50-100 C) and constant maintainable; · Impact insulation provided in the blanching area to prevent heat loss; · Ensure continuous supply of thermally processed fish raw materials and packaging area; · Provide water or steam connections and the possibility of draining overflow liquid or condensate and blanching liquid directly into the sewage system; Blanching power 600 kg per hour (If you need more, you can write, but send us the layout of the manufacture place.) Equipment for dosing fish raw materials in cans and packing cans - Equipment, (can dispenser for Hansa cans type), which provides a can sequential feeding to the raw material dosing area. Speed ​​min. 75 up to 90 cans/min. · Equipment that provides semi-automatic dosing of blanched fish raw materials in cans: manual placement of raw materials in the portioning area, mechanized portioning and mechanized dosing of the fish portion in a box. The operating speed of the line must be matched with the operating speed of the cans dispenser. Gbodov Dftxspfx Aqwjp Permissible deviation +- 4 grams Equipment for the accumulation of filled cans, which allows the accumulation of at least 2 min of packing capacity, min 150 cans; · Equipment that provides continuous weighing of cans with the possibility of diverting cans that are below the permissible deviation of the specified weight to the forgiving conveyor, and ensures the return of cans to the flow after the forgiving; · The equipment is easy to service and sanitary. · Number of employees servicing the equipment: 4 employees Automatic control unit - Provides automated equipment control and the ability to adjust the speed of equipment operation. ​Technical Maintenance & Stability: We provide expert maintenance, diagnostics, and spare parts availability to prevent unplanned downtime and ensure your lines run smoothly. Equipment: You can send separate parts if needed. 1- Fillet conveyor – 1pcs 2- Blanching conveyor line – 1pcs 3- Fillet dosing machine – 1pcs 4- Checkweigher – 2pcs 5- Can dispensing machine – 2pcs 6- Rotary table – 1 pcs 7- Conveyor line – 8pcs Uses The line is designed for blanched fish fillets. Automatic filling of blanched fish fillets into "Hansa" type cans and weight control with feeding to the capping machine.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0100002362, pressure: 8 bar, power: 60 kW (81.58 HP), operating pressure: 8 bar, temperature: 175 °C, operating temperature: 175 °C, total height: 956 mm, total length: 1,074 mm, nominal heat output: 60 kW (81.58 HP), total width: 770 mm, nominal power: 60 kW (81.58 HP), tank capacity: 74 l, empty load weight: 340 kg, VEIT 2381 High-Pressure Industrial Steam Generator (60 kW / 8 Bar) Central Steam Supply System for Garment, Textile & Industrial Finishing Applications The VEIT 2381 is a heavy-duty electrically heated high-pressure steam generator manufactured by VEIT GmbH, Germany, one of the world's leading manufacturers of industrial pressing and finishing equipment. This unit served as the central steam supply for a professional garment manufacturing facility, providing continuous steam for pressing stations, finishing equipment, and other steam-powered production processes. The steam generator remained in production until the factory shutdown and formed part of a fully operational industrial steam distribution system. Technical Specifications • Manufacturer: VEIT GmbH • Model: 2381 • Type: High-Pressure Industrial Steam Generator • Year: 2005 • Boiler Number: P-81 • Heating Capacity: 60 kW (3 × 20 kW heating elements) • Steam Output: Approximately 78 kg/hour • Maximum Working Pressure: 8.0 bar • Factory Test Pressure: 13.0 bar • Maximum Operating Temperature: 175.4 °C • Water/Steam Tank Capacity: o Total: 75 litres o Water: 50 litres o Steam Reserve: 25 litres • Power Supply: 400 V Key Features • Heavy-duty electrically heated steam generator • Continuous high-capacity steam production • Central steam supply for multiple workstations • Three-stage heating system (3 × 20 kW) • Integrated stainless steel feed-water and condensate tanks • High-temperature feed-water pump • Integrated pressure monitoring • Front-access blow-down valve for easy maintenance • Industrial electrical control cabinet • Designed for continuous production environments • Can be integrated into central steam distribution systems Includes • VEIT 2381 steam generator • Integrated electrical control panel • Heater and pump control switches • Pressure gauge • Main electrical disconnect switch • Integrated electrical cabinet • Feed-water and condensate tanks • Steam connection interfaces • Industrial frame Typical Applications • Garment pressing departments • Textile finishing lines • Industrial ironing stations • Apparel manufacturing • Laundry and dry-cleaning facilities • Central steam supply systems • Industrial steam distribution networks Condition Gbsdpfxezibane Aqwsp • Used industrial condition • Operational prior to factory shutdown • Serviced on 27.02.2026 • Good industrial appearance with normal production wear • Available for inspection before dismantling Please note: The control panel currently displays the "Low Water Level / Water Supply Boiler" indicator. This is normal when the unit has been disconnected from the water supply and drained for storage or transportation, and does not by itself indicate a fault. Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting electrical, water, and steam connections, dismantling, loading, and transportation. Professional removal is recommended due to the weight of the equipment and the industrial utility connections. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: new, Year of construction: 2025, machine/vehicle number: MA0123_1401, New Kaeser SM 16 T - 8 bar screw compressor with integrated refrigeration dryer with ECO-Drain (level-controlled condensate drain) Control: SIGMA CONTROL 2 Year: 2025 Gbedpfshmu Ugex Aqwjp Pressure: 10 bars Rated power: 9 kW Delivery quantity at 7,5 bar: 1.62 m³/min Sound level: 66 dB(A) Compressed air outlet: 3/4" Dimensions length x width x height: 630 x 1090 x 1100 mm Weight: 315kg Operating hours: 0 hrs Visit our store. We always have a wide range of new and used compressors in stock!

Condition: new, Year of construction: 2026, New Kaeser SK 18 T - 10 bar screw compressor with integrated refrigeration dryer with ECO-Drain (level-controlled condensate drain) with Control: SIGMA CONTROL 3 Year: 2026 Pressure: 10 bars Rated power: 9 kW Delivery quantity at 10 bar: 1.46 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Dimensions length x width x height: 750 x 1240 x 1245 mm Weight: 387 kg Visit our store. Gbedpfxezlgnps Aqwsp We always have a wide range of new and used compressors in stock!

Condition: used, Pressure reducing valve, condensate drain, valve, check valve, control valve, Thermovit regulator, condensate drain regulator -Manufacturer: Gestra, Thermovit regulator for condensate drain regulator UBK 46 Ovp -Type: .-Controller UBK46 -Material number: 375324 -Quantity: 14 pieces available Gjdpfx Asipwcasqwjbp -Price per piece -Carton dimensions: 75/70/H55 mm -Weight: 0.1 kg/piece

Condition: new, -User-friendly operating concept -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point -Control system displays five different alarm states and stores them in memory -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance -High cost-effectiveness -Excellent price-performance ratio -No unnecessary compressed air losses thanks to the integrated electronic condensate drain -Connected tools and machines are optimally protected -User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria Gbodpfsu T Hrvox Aqwop - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: excellent (used), Compressor AIRCRAFT ACS Duo – used – Galvanised tank, screw compressor, incl. refrigerated dryer, incl. condensate treatment unit, automatic condensate drain ----- Technical Data ----- Tank capacity: 2 x 100 litres, Filling performance: 360 litres, Max. pressure: 10 bar, Motor: 3.5 kW, Speed: 2,880 rpm, Sound pressure level: 69 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg Quality Info: Gbsdpfx Aqewb Evtewep - fully cleaned - electrics checked - immediately ready for operation

Condition: new, - Exhibition machine - For continuous air demand and intermittent operation Electronic control for reliability and efficiency. Increased flexibility thanks to two compressed air tanks High-quality and expandable equipment. Smooth and quiet running. Can also be used in intermittent intermittent operation. DUO KK equipment Gbodeu R S A Dopfx Aqwep with refrigeration dryer and fine filter as pre-filter before the refrigeration dryer Condensate conditioner for oil-water separation Automatic condensate drain. ----- Technical data ----- Tank size: 2 x 100 liters, Effective delivery volume approx. 380 liters, Maximum pressure: 10 bar, Motor: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg - new exhibition machine -

Condition: refurbished (used), Year of construction: 2006, power: 90 kW (122.37 HP), fuel type: electric, volume flow: 1,000 m³/h, pressure (max.): 7.5 bar, type of cooling: air, We offer this refurbished Atlas Copco GA90 rotary screw compressor, year 2006. Gbjdoyxy Daopfx Aqwep The compressor was imported from Europe and has not been operated in Ukraine. Comprehensive repairs have been carried out, including replacement of the screw block bearings and gearbox (multiplier) bearings, shaft seal replacement and bushing, replacement of the flexible coupling for torque transmission, replacement of the electric motor bearings, as well as replacement of all filters and oil. A new inlet valve with a new solenoid valve has been fitted. The thermostatic valve has been overhauled with a new repair kit, as well as the minimum pressure valve, oil-stop valve, check valve with repair kits replaced, and the condensation drain valve has also been serviced. A new Elektronikon compressor control unit has been installed. The hydraulic hoses have been replaced and the oil system has been cleaned. Delivery across Europe can be arranged.

Year of construction: 2015, condition: used, Used machine Year of manufacture: 2015 Equipment and technical data: - Suction capacity: 611 l/min - Delivery rate: 485 l/min (at 8 bar) - Motor: 4 kW / 400 V Godpsyyfknofx Aqwjbp - Aggregate speed: 1437 rpm - Oil capacity in the crankcase: 0.9 l - Max. operating pressure: 10 bar - Tank capacity: 270 l - Number of cylinders: 2 - Sound pressure level: 83 dB(A) - with refrigerant dryer DK 985 Eco: - Volume flow at pressure dew point +3 °C: 600 l/min - Power consumption: 0.3 kW - Pressure drop: 0.25 bar - Voltage: 230 V - with automatic condensate drain - Dimensions: 325 x 263 x 745 mm - Weight: 25 kg Dimensions: 930 x 830 x 1840 mm Weight: 190 kg Availability: short-term Location: Röllbach

Condition: excellent (used), Year of construction: 2019, Technical data: Pressure 10 bar Flow rate 1080 l/min Voltage 400 V Drive power 7.5 kW Weight 431 kg Noise level 63 dB(A) Air outlet 3/4" Dimensions (WxDxH) 1950 x 690 x 1700 mm with integrated refrigeration dryer, automatic condensate drain, oil-water separator Gbedpfxexq Elwe Aqwep

Condition: used, Year of construction: 2016, Suction capacity approx. 850 l/min Filling capacity approx. 680 l/min Compressed air tank 10 bar Gbsdpfoy Ifmrox Aqwsp Tank capacity Tank capacity 2 x 100 l Tank surface galvanized Mounted on safety base plate Including refrigerated dryer, fine filter, automatic condensate drain

Year of construction: 2023, condition: new, New Refrigerated Compressed Air Dryer DESCRIPTION Eligible for BAFA subsidy (as of 06/2023) User-friendly operation concept Efficient design for cost-effective and reliable operation Cooling fan with variable speed control from 0 - 100%, eliminating the need for the usual pressure switch and thermostat for fan control Fewer wear parts with a consistently stable pressure dew point Control system displays five different alarm statuses and retains them in memory Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing Clear layout and easy access to all serviceable components Equipped with built-in automatic condensate drain Key Advantages at a Glance Highly efficient Excellent price-performance ratio No unnecessary compressed air losses thanks to integrated electronic condensate drain Connected tools and machines are optimally protected User-friendly control concept TECHNICAL DATA General Information Air flow rate l/min: 1800 l/min Air flow rate m³/h: 108 m³/h Maximum pressure: 16 bar Air connection: ½" Power consumption: 0.2 kW Dimensions and Weights Length (product): approx. 325 mm Gbjdpfx Ajw I U Aujqwjp Width/depth (product): approx. 430 mm Height (product): approx. 445 mm Weight (net): approx. 24 kg Availability: short-term Location: Hochheim

Year of construction: 2023, condition: new, New Refrigeration Dryer Year of Manufacture: 2023 User-friendly operation concept Efficient design for cost-effective and safe operation Cooling fan with 0 - 100% variable speed control, eliminating the need for the usual pressure switch and thermostat for fan control Fewer wear parts with a consistently stable pressure dew point Control panel displays five different alarm statuses and retains them in memory Refrigeration compressor switches off below 15°C ambient temperature when no compressed air is flowing through Clear layout and easy access to all serviceable components Equipped with an integrated automatic condensate drain Gbjdpfsw I U H Tex Aqwop Key Advantages at a Glance • High efficiency • Excellent price-performance ratio • No unnecessary compressed air losses thanks to integrated electronic condensate drain • Connected tools and machinery are optimally protected • User-friendly operation concept TECHNICAL DATA General Information Airflow rate: 900 l/min Airflow rate: 54 m³/h Maximum pressure: 16 bar Air connection: ½" Power consumption: 0.18 kW Dimensions and Weights Length (approx.): 325 mm Width/Depth (approx.): 430 mm Height (approx.): 445 mm Net weight (approx.): 24 kg Availability: short term Location: Hochheim

Condition: good (used), H. Köhler HK 300 S Condensation Water Test Device Manufacturer: H. Köhler GmbH Type: HK 300 S Machine Type: Condensation Water Test Device / Corrosion Test Chamber Test Chamber Volume: approx. 300 l For sale is a used H. Köhler HK 300 S condensation water test device. The device is suitable for condensation water climate tests according to DIN 50 017, corrosion tests, coating tests, paint tests, material testing, and quality assurance. Technical Data Test chamber volume: approx. 300 l Temperature range: Room temperature to approx. +55 °C Humidity range: Saturation operation possible Test chamber heating: 1,000 W Power connection: 230 V / 50 Hz Connected load: 1,000 W Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Gedpezhadcefx Aqwsbp Deionized water connection: 2.5 - 4.0 bar Dimensions (W x D x H): approx. 1,200 x 600 x 1,750 mm Weight: approx. 100 kg Control HK PC102 control unit LCD display Programmable test sequences Condensation water climate DIN 50 017 Manual operation / test operation Alarm display Equipment Stainless steel test chamber Large glass door with seal Test chamber thermometer Manometer Ventilation system Compressed air connection Deionized water connection Drain connection Stainless steel base with rollers Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Display shows condensation water climate DIN 50 017. No documentation available. Scope of supply H. Köhler HK 300 S Condensation Water Test Device Stainless steel base Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge on the left, one-hand operation, lockable. Insert shelf: stainless steel, support surface 970 x 980 + 500 mm Load per shelf max. 35 kg Total load with max. shelf configuration 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface free switching channels for on-site test specimen control Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Gbedpfxjzg Twao Aqwep Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, Width 975, Depth 2200 mm External dimensions: Height 1950, Width 1290, Depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, unpressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, here is the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2015, condition: used, Used machine Year of manufacture: 2015 Equipment and technical data: - Suction capacity: 611 l/min - Delivery rate: 485 l/min (at 8 bar) - Motor: 4 kW / 400 V - Aggregate speed: 1437 rpm - Oil capacity in the crankcase: 0.9 l - Max. operating pressure: 10 bar - Tank capacity: 270 l - Number of cylinders: 2 - Sound pressure level: 83 dB(A) - with refrigerant dryer DK 985 Eco: - Volume flow at pressure dew point +3 °C: 600 l/min - Power consumption: 0.3 kW - Pressure drop: 0.25 bar - Voltage: 230 V - with automatic condensate drain - Dimensions: 325 x 263 x 745 mm - Weight: 25 kg Dimensions: 930 x 830 x 1840 mm Weight: 190 kg Godpezk Nqkofx Aqwjbp Availability: short-term Location: Röllbach

Year of construction: 2019, condition: excellent (used), Weiss Technik SaltEvent SC 1000 Salt Spray Chamber Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Machine type: Salt spray chamber / corrosion testing device Size: 1000 liters For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. This device is suitable for salt spray tests, corrosion tests, condensation water tests, material tests, surface tests, as well as applications in quality assurance, research, and development. Technical data: Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A, slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Test chamber / load: Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Storage surface, machine part cover: 5 kg Temperature and test data: Temperature range, salt spray test: Ambient temperature +5 K to +50 °C Temperature range, condensation water test: Ambient temperature +5 K to +42 °C Temperature, compressed air humidifier: Ambient temperature +5 K to +70 °C Temporal temperature constancy: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment: S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking mechanism Temperature monitoring Interface Documentation as shown in the pictures Connections: Power connection 230 V / 50 Hz Compressed air connection Connection for demineralized water Exhaust connection Water drain / condensate drain Application areas: Salt spray test Corrosion test Condensation water test Material test Surface test Coating test Automotive Quality assurance Research and development Condition: Used Functional testing performed before delivery. Optical condition as shown in the pictures. Scope of supply: Gbjdpfx Aqozg Er Aowop Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Documentation as shown in the pictures Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: new, Year of construction: 2025, overall weight: 244 kg, total height: 2,270 mm, pressure: 11 bar, New KAESER vertical compressed air receiver, 1,000 liters, galvanized, 11 bar (incl. fittings kit and pressure gauge assembly) Year of manufacture: 2025 High-quality compressed air receiver with a galvanized finish. Hot-dip galvanized inside and out in accordance with DIN EN ISO 1461. Connection ports designed for tapered threads. Godjqt A Iqjpfx Aqwobp Technical Specifications: Volume: 1,000 liters Max. working pressure: 11 bar Diameter: 800 mm Receiver height: 2,265 mm Weight: 244 kg Air inlet connection: 2 x G 1 1/2" Air outlet connection: 2 x G 2" Safety valve connection: G 2" Condensate drain connection: G 2" Receiver Certification: Directive 2014/68/EU (PED) Inspection opening according to AD2000: 2 x handhole Min. operating temperature: -10°C Max. operating temperature: +50°C Surface coating: Galvanized Convenient leasing options for new equipment are available through our partner bank. Feel free to visit our retail store. We constantly maintain a large stock of new and pre-owned compressors!

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Gsdpozf Ibkefx Aqwobp Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Year of construction: 2021, condition: used, functionality: fully functional, machine/vehicle number: 866707054, You are bidding on a Hobart rack conveyor dishwasher, CN series. This machine was first installed in a canteen in June 2021 and used for lunchtime service. Due to the closure of the business, operations ceased in December 2024. The dishwasher was newly purchased by the operator and was maintained accordingly, with all necessary servicing performed. HOBART presents the new generation of the proven CN series as a high-performance PRO version – the new rack conveyor dishwasher stands for greater efficiency and economy, making commercial dishwashing even more sustainable. Professional, powerful, and reliable for the daily challenges in commercial kitchens. The CN series rack conveyor dishwasher is modular and operates from left to right, starting with pre-washing, main washing, rinsing, drying, and discharge with a conveyor belt. The dismantling was carried out by Hobart's factory service department. Commissioning will also be carried out by the factory service department, subject to a cost contribution, to ensure that the warranty applies. This machine has an MSRP of approximately €58,000 net / €69,020 gross. You will receive an invoice with VAT shown. Equipment details: Climate heat recovery system – utilizes exhaust air intelligently. Climate-Pro heat pump – saves up to 20 kWh. LC cleaning agent saving system Triple rinse Washing system with wide-angle nozzles Dynamic-Dry drying Automatic water consumption Empty rack detection Permanent soil removal: ASR soil removal Drop-in washing system Color-coded cleaning aid Deep-drawn drain spout Completely deep-drawn wash tank Easy-to-clean condenser Contact between dishes and washing solution TRI-RINSE rinsing: High-quality rinsing result through a 3-stage zone PERMANENT-CLEAN soil removal: Revolutionary filter system eliminates manual pre-rinsing. LC cleaning agent saving system: Reduces cleaning agent consumption by up to 50%. Automatic adjustment of water consumption: Automatic adjustment of machine consumption to machine utilization. CLIMATE heat recovery: Exhaust air used intelligently CLIMATE-PRO heat pump: Innovation meets economy and energy efficiency. RACK-FLOW sensor system: Makes one-person operation easy Completely deep-drawn tank: No chance for dirt residue Easy-to-clean condenser Deep-drawn drain spout DYNAMIC-DRY drying: Optimal drying result thanks to new fan technology with higher dynamic air speeds. This results in up to 50% more efficiency. Technical data: External dimensions of dishwasher W: 4215 x D: 2336 x H: 2150 mm. Dimensions, see photo sketch. Passage width: 510 mm Passage height: 440 mm Electrical connection: 400V 3NPE 50Hz; 26.5kW Godpsy N R Nhsfx Aqwobp Model: CN-C-A-CDC Serial number: 866707054 Year of manufacture: 2021 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. Subject to change and errors.