Used Ebaki Trancheuse Horizontale 1 V for sale (92,841)

Condition: new, Year of construction: 2025, Hoku BK119-270-10-VKK upright piston compressor with refrigerant dryer, automatic condensate drain, oil-water separator, pre- and fine filters, mounted with rubber vibration dampers on a safety pallet. Universal piston compressors with belt drive and high-quality features. Pressure vessel manufactured according to German AD 2000 regulations. Intake capacity: 650 l/min Effective delivery rate: 520 l/min Maximum pressure: 10 bar Tank volume: 270 l Cylinders/stages: 2/2 Speed: 920 rpm Motor power: 4 kW/400 Volt Air throughput: 650 m³/h Motor power: 4 kW Machine dimensions: 1200 x 800 x 2000 mm Pressure vessel: 270 L Effective delivery volume: 520 L/min Intake volume: 650 L/min Maximum pressure: 10 bar Location: ex stock 54634 Bitburg - immediately available - Dedpfx Aper Ig Ahetjcl

Condition: new, Year of construction: 2025, Technical specifications: ALKO clean air extraction system, mobile type, Model Mobil-Power Unit APU 120, motor power 1.5 kW, suction nozzle diameter = 120 mm, sound-dampened, mobile collection container, 135 liters, manual filter cleaning, dimensions: L = 1,085 mm, W = 650 mm, H = 1,985 mm, volume of dust container: 135 liters, weight: 117 kg, nominal volumetric flow rate (after cleaning): 814 m³/h. Exhibition model. Available at a special price. Location: In stock at Bitburg warehouse. Dcsdpfscdy Ndsx Aptol

Condition: used, Year of construction: 2015, operating hours: 38,504 h, functionality: fully functional, torque: 200 Nm, controller manufacturer: Siemens, controller model: 840D solutionline Operate, rotational speed (max.): 10,000 rpm, overall weight: 9,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 12,935 h, number of spindles: 1, number of slots in tool magazine: 60, DMG MORI DMC 1450 V Vertical Machining Center | Year of Construction 2015 | SK40 & 60-position Magazine For sale is a robust and precise vertical machining center from the manufacturer DMG MORI, model DMC 1450 V. This machine, built in 2015, is extensively equipped, including with internal cooling, a direct path measuring system, and a 10,000 rpm spindle with 200 Nm of torque. In 2021, the spindle was professionally replaced after an incident. General Machine Data * Manufacturer: DMG MORI * Model: DMC 1450 V * Year of Construction: 2015 * Machine Number: 14595607194 * Operating Hours: 38,504 h * Spindle Hours: 12,935 h * Machine Weight: 9,900 kg Control System * Type: Siemens 840D solutionline Operate 3D control system Spindle * Speed: 10,000 rpm * Torque: 200 Nm * Tool Clamping: SK40 * Note: Spindle replaced after incident in August 2021 (according to service history) Tool Changer * Magazine Positions: 60 positions * Tool Clamping: SK40 Coolant & Disposal Dcodezypzzepfx Aptol * Internal coolant supply (IKZ): Basic package 3 * Blow-through air through the spindle center * Coolant/air switching * Flushing gun for chip flushing * Oil and emulsion mist separator (mechanical) Additional Equipment & Measuring Technology * Path measuring system: Direct path measuring system X, Y, Z * Measuring probe: Infrared TS649 DMG * Enclosure: Operating mode 4 * Software: DMG Netservice - client Excerpt from the Service History * 10/2022: Complete replacement of the X-axis bellows * 03/2022: Replacement of the Y-axis roof * 12/2021: Replacement of the left-hand blind * 10/2021: Timing belt renewed * 08/2021: Spindle replacement after incident * 2020/2021: Work/replacement on the OP019 TFT 19" screen From an insolvency proceeding, sold as is. Offer deadline: September 30, 2026, 6:00 PM. Package price possible for multiple machines from this proceeding. Inspection: September 16, 2026, 10:00 AM - 12:00 PM, Fraunhoferstraße 10-12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM - 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH homepage under Auctions.

Condition: excellent (used), 486 USED Hobart V-1401 Pastry beater. EXTERNAL DIMENSIONS (in cm): - W: 80 - L: 110 - H: 180 TECHNICAL DATA: - power: 3.7 kW - power supply: 400V 50Hz Dsdpjzq Szfjfx Aptecl - kettle capacity: approx. 130 L EQUIPMENT: - 4 kettles - 2 whisks The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, functionality: fully functional, spindle bore: 102 mm, center height: 400 mm, turning length: 2,000 mm, Maximum height between centers: 400 mm Distance between centers: 2000 mm Djdozql D Hopfx Aptecl 26 spindle speeds from 4.5 - 1400 RPM - driven upper slide rest - rapid traverse - Forkardt 400 mm

Condition: used, mileage: 6,10,000 km, power: 390 kW (530.25 HP), first registration: 07/2017, fuel type: diesel, axle configuration: 4x2, color: white, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, BIG Space, 2.5m cab – 3700mm wheelbase – Standard fifth wheel coupling, Jost JSK – Automated Mercedes PowerShift 3 gearbox – Gearbox with integrated GPS for reduced fuel consumption (PPC) – High-performance enhanced engine brake – Aquatarder – Auxiliary electric air conditioning – Automatic climate control – Luxury lower bunk – Hot water cabin heater – Pneumatic driver’s seat, comfort – Electric tilting roof – Active Brake Assist – Attention Assist – Halogen fog lights – Stability control (ESP) – Anti-skid system/lane keeping assist – EPB braking system with ABS and ASR – Cruise control – Spare wheel Dcodpjzp R T Rsfx Aptol

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, controller manufacturer: Haas, overall weight: 3,250 kg, spindle speed (max.): 7,500 rpm, number of spindles: 1, number of slots in tool magazine: 20, Equipment: documentation/manual, 3-axis machining center Manufacturer: Haas Type: VF-1 / VCE-500 Year of manufacture: 09-1998 Dedpfx Apszu Stvstjcl Control: Haas (retrofit) Operating hours: unknown S/N: 16XXX Technical data: ----- - Table size: 660 x 356 mm - Travel ranges X-Y-Z: 508 x 406 x 508 mm - Spindle: max. 7,500 rpm - Spindle power: 11 kW - Tool holder: SK40 - Tool magazine with 20 stations - Coolant system - Programmable coolant nozzle - Chip conveyor - Footprint L x W x H: 2.60 x 2.30 x 2.50 m - Weight: approx. 3.2 t Accessories: ----- - Documentation - SK-40 holder set Special features: ----- - Retrofitted with newer Haas control! - In excellent condition.

Condition: used, axle configuration: 3 axles, first registration: 07/2011, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2011, Equipment: ABS, = Additional options and accessories = - EBS = Notes = Number of axles: 3, Tare weight: 8270 kg, Gross weight: 39000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2011, Refrigeration unit manufacturer: Carrier, Refrigeration unit model: Vector1850, Refrigeration unit: Diesel/electric, Operating hours (electric): 6333, Operating hours (diesel): 12916, Wall thickness: 65 mm, Type of cooling: Refrigeration, Axle type: MERCEDES-BENZ = Further information = General information Cab: Day cab Registration number: KLEYN1 Powertrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 11 mm Axle 3: Tire tread depth left: 11 mm; Tire tread depth right: 4 mm Weights Tare weight: 8,270 kg Payload: 30,730 kg GVW: 39,000 kg Functional Refrigeration unit: Diesel and electric (12916 operating hours diesel; 6333 electric) Wall thickness: 65 mm Environmental Emissions class: Euro 0 Condition Overall condition: fair Technical condition: fair Optical condition: fair Damage: none = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers Dcedpfx Apoyw Hpmetsl • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, mileage: 34,155 km, power: 100 kW (135.96 HP), first registration: 10/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, Total allowable weight: 3500kg Dcodpfszyc I Uox Aptel

Condition: used, mileage: 66,000 km, power: 70 kW (95.17 HP), first registration: 09/2011, fuel type: diesel, overall weight: 2,800 kg, color: yellow, gearing type: mechanical, emission class: euro5, Year of construction: 2011, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Mercedes-Benz Vito EURO 5, Long / Maxi, from 1st owner, with 2 sliding doors Net price: €8,300 First registration: 09/2011 Mileage: 66,000 km TÜV/MOT valid until: 05/2027 ---- Please, no emails – due to time constraints, we can only respond occasionally. Thank you for your understanding. If you have questions: Opening hours & further information: Viewing & purchase possible without appointment: No advance booking required! Mon – Thu: 9:00 to 16:00 Fri: 9:00 to 13:00 Sat: 9:00 to 12:00 Address: Tabakried 11 84076 Pfeffenhausen Please no emails – they cannot be processed due to time constraints. Thank you for your understanding. For inquiries: Contact: Christian Hirsch Please try several times, as we are often with customers. VAT deductible - First owner - 2x sliding doors - Multifunction steering wheel - 6-speed manual transmission - Pre-wired for phone/mobile - Registered as a 2-seater in the documents - EURO 5 - Front parking sensors (PDC) - Rear parking sensors (PDC) - Electric windows - Central locking with remote - Sliding window in bulkhead - Rear window wiper - Fog lights - Electrically adjustable/heated mirrors - And much more - COC (Certificate of Conformity) - N1 approval (commercial vehicle registration) Special equipment: - Electrically adjustable and heated exterior mirrors, both sides - Wideband speakers in front - Rear door/tailgate windows with wiper/washer Djdpfx Aszyfpusptscl - Fixed window, front right, in load/passenger compartment - Wooden floor in cargo area - Additional interior light in cargo area - Folding lid for storage compartment - Bulkhead partition with sliding window - Multifunction steering wheel incl. trip computer - Parktronic system (PTS) - Radio pre-installation - Sliding door on left side of load/passenger area - Driver's cab seats: storage pocket at seat back - Driver’s cab seats: comfort driver seat - Driver’s cab seats: driver’s seat with lumbar support - Absorbent glass mat battery 95 Ah - Auxiliary heater Other equipment: - Adaptive brake light - Driver’s airbag - Model: Vito Panel Van - Aspherical exterior mirrors, both sides - Roof rack mounting rails - Brake assist - Windscreen with antenna - 180 A alternator - Tailgate - Body type: panel van - Body length: long - Manually adjustable steering column - N1 approval - Model update - Engine: 2.1 L – 70 kW CDI - Pollen filter - Wheelbase: 3,200 mm - Tire repair kit with compressor - Low emissions according to Euro 5 standard - Sliding door right, load/passenger area - Seat upholstery: Lima fabric - Half-height hardboard lining in cargo compartment If you have any questions, Christian Hirsch or our friendly staff will be happy to help you. For inquiries: Christian Hirsch Please try multiple times as we may be in customer conversations.

Condition: used, Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 508 mm Travel range, Y-axis: 406 mm Travel range, Z-axis: 508 mm Distance from spindle nose to machine table: max. 610 mm Distance from spindle nose to machine table: min. 102 mm Rated power: max. 22.4 kW Torque: max. 122.0 N·m at 2,000 rpm Torque with optional gearbox: max. 339 N·m at 450 rpm Spindle design: metric Spindle taper: SK40 Spindle speed: 15,000 rpm Table length: 660 mm Table width: 356 mm Width of T-slots: 15.90 to 16.00 mm Center distance of T-slots: 125 mm Number of T-slots in standard configuration: 3 Load capacity of the table with uniform distribution: max. 1,361 kg Feed rate during machining: max. 16.5 m/min Rapid traverse, X-axis: 25.4 m/min Rapid traverse, Y-axis: 25.4 m/min Rapid traverse, Z-axis: 25.4 m/min Dcedpfxszxhmto Aptjl Tool diameter (overall): max. 89 mm Tool weight: max. 5.4 kg Tool-to-tool change time (average): 4.20 s Chip-to-chip change time (average): 4.50 s MACHINE DETAILS Coolant tank capacity: 208 l Input voltage AC, three-phase, low: 220 V AC Full-load current, three-phase, low: 70 A Input voltage AC, three-phase, high: 440 V AC Full-load current, three-phase, high: 35 A Weight: 3539 kg The seller estimates the operating hours to be approximately 9,000 hours. EQUIPMENT 20-position tool changer Chip conveyor Internal cooling, 21 bar Coolant mist extraction system Additional coolant filter

Condition: used, machine/vehicle number: 007842, X axis working area: 5000 mm Y axis working area: 1200 mm Working Table: Pod and Rail Main Electrospindle power: 18 KW Dedpfx Apsyhbiuetjcl Number of controlled axes: 4 axes Maximum edge height: 64 mm Total number of drilling spindles: 14 Total number of tool changer positions: 18

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 4,000 kg, lifting height: 9,100 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 100 kW (135.96 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 8,440 kg, total length: 5,120 mm, drive type: Diesel, construction width: 2,390 mm, Telescopic forklift, rigid Load center: 500 Fork width: 125 mm Dcsdezyxcnopfx Aptjl Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Speed class: 40 Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 460/70 R24 159A8 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 460/70 R24 159A8 Rear tire condition: 80 - 100% Battery voltage: 12V Battery type: Starter Battery year of manufacture: 2026 Battery condition: 80 - 100% 3rd valve, rear work light, front work light, heater, soot filter, full cabin, air conditioning, full free lift, CE certificate, LED, seat Equipment: Classic

Condition: excellent (used), Year of construction: 2011, Machine Name : Chen Hsong EM120-V Year of Manufacture : 2011 Operating Hours : 58,209 Clamping Force (kN) : 1200 Injection Pressure (bar) : 1700 Cylinder Volume (cm³) : 203 Screw Diameter (mm) : 42 Horizontal Platen Size (mm) : 610 Dcjdpfx Apew Aw S Astel Vertical Platen Size (mm) : 560 Tie Bar Distance Horizontal (mm) : 410

Condition: used, Suitable for steam heating capacity 1.600L. all stainless steel double jacket tiltable drum stirring system with spring-mounted scrapers high pressure steam (max. 10 bar) dimensions (l x w x h): ± 4.000 x 2.000 x 2.300 mm Dcodpfx Aszwllwsptjl + "Berief" Loader for 200L eurobins, Type L25

Condition: like new (used), functionality: fully functional, machine/vehicle number: ZCFCE358305679711, mileage: 200 km, first registration: 01/2025, fuel type: diesel, maximum load weight: 877 kg, tire condition: 100 %, wheelbase: 4,100 mm, next inspection (TÜV): 01/2029, fuel: diesel, CO₂ emissions: 275 g/km, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 7,283 mm, total width: 2,052 mm, Year of construction: 2025, Equipment: ABS, airbag, IVECO DAILY 35C12 V 4100 H3 Quad-Tor RG - EURO 6E National Vehicle - VAT shown separately Dodpfx Ajyctnleptjcl Vehicle length: 7.283 m Payload: 877 kg Leasing and customized financing options available Also with no down payment, with small monthly installments and a larger final payment Trade-in and scrapping options available Price: €29,500.00 + 22% VAT = €35,990.00 VAT included CERTIFIED mileage, both on the contract and on the invoice. Despite our best efforts to provide all the details of the vehicle, there may be some discrepancies in the listed accessories and/or photographs. We therefore invite you to verify the details with one of our consultants, who will be available to provide any additional information. JollyAuto - Multibrand Dealership since 1984 - Passenger cars and commercial vehicles of all brands - DFSK – EMC – FOTON dealership for the provinces of CREMONA and LODI - New, as-new, company cars, guaranteed used vehicles - VALUATION and TRADE-IN of your used vehicle - Authorized EUROREPAR workshop – Stellantis Group

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from cleanroom production (pharmaceutical sector) - Equipped with 820 mm rotary table - Including GEKU Robot SR 500 ST (x=600, y=1400, z=2500 mm) - Only 33,107 operating hours - Safety enclosure / protective cage - Horizontal conveyor belt Dedpfx Aoub Umqjptecl - Hardly any paint damage / almost as new in appearance - Fully operational The machine can be inspected under power by prior arrangement. Technical Specifications Manufacturer: Engel Model: V 330H/80V/130 Combi 2-Color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions L/W/H: see drawing Weight: 10,600 kg Functionality: fully operational Condition: excellent Special features Control system: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 cm³ Clamping force: 1300 kN / 130 tons Tie bar spacing: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor power: to be provided Heating capacity: to be provided Total power: to be provided The machine is immediately available from our warehouse in Hannover, Germany, and has been tested. Extras 2-component / 2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Safety enclosure / protective cage CC 200 control, German and English languages GEKU Robot Details SR 500 ST Control: Simotion X axis: 600 mm Y axis: 1400 mm (vertical) Z axis: 2500 mm (horizontal) A flip axis: SWM 45 C axis: Servo Gripper: SWS16 B axis: not available Warranty Warranty up to initial commissioning Loading/Shipping Free loading onto buyer's truck or free delivery against freight reimbursement from our warehouse in Hannover, Germany Financing – on request – leasing option Price on request

Condition: used, Year of construction: 2009, turning diameter: 2,000 mm, travel distance X-axis: 1,875 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 1,345 mm, rotational speed (max.): 300 rpm, rotational speed (min.): 10 rpm, Equipment: documentation/manual, CNC Vertical Multitasking Machine CNC Control Mazatrol Matrix 2 Turning diameter 2000 mm Dcodpozv T D Eofx Aptjl Turning speed 10-300 R/min Milling head speed 25-5000 R/Min Movement X-Y-X-axis 1875-1550-1345 mm B-axis travel -30/120° C-axis indexing 360/0,0001° Tool taper Capto C8 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), lifting height: 5,500 mm, Year of construction: 2022, operating hours: 390 h, Weights Empty weight: 1.403 kg Functional Lifting capacity: 1.000 kg Dimensions of cargo space: 270 x 95 x 190 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Hook height luffed jib: 425 cm Delivery terms: EXW Latest inspection: 2024-07-15 Production country: IT Dsdpjvkd Uuofx Aptocl Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Jekko MPK10V * 2022 * Battery * 390 working hours * 4.25 meter hook height * 5.5 meter vacuum height * Remote control * 1403 kg own weight * 990 kg lifting capacity * Inspection until July 2025 * including documents

Year of construction: 2011, condition: used, Max. throughput: 25t/h, inlet width: 1300mm, inlet height: 1200mm, rotor diameter: 1200mm, drive power: 132-315kW, an on-site inspection is possible. Dcsdpfszyq T Esx Aptol

Condition: used, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 4 kg, input voltage: 230 V, Equipment: documentation/manual, type plate available, For sale is a ZEISS GOM Scan 1 MV400, a high-precision optical 3D scanner for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industry and research. Fast setup, easy operation. Condition: Like new, little used, primarily used for trade shows, exhibitions, and training. Scope of delivery: ZEISS GOM Scan 1 MV400 Dcjdpezypzusfx Aptol Original accessories according to standard configuration Power supplies and cables 10 m cable Transport case available Tripod and PC are not included in the offer and will not be provided, but can be offered separately upon request. ZEISS INSPECT OPTICAL 3D Free Open and edit new and existing projects Import of point clouds, polygon meshes Creation, editing, and processing of polygon meshes Element construction: regular geometries, points, sections, curves, surfaces, dimensions CAD import of standard formats IGES, VDA, STEP, JT Open, STL, PLY Application of common alignment methods Comparison against CAD with colored deviation display Dimensional and form/position evaluations according to ISO GPS and ASME Y14.5 Report module Note: The device has only been used for demonstration, training, and presentation purposes. A new 3D acceptance certificate will be provided upon purchase. Furthermore, we would offer to take in used optical GOM or Zeiss systems in part exchange upon purchase of the Zeiss GOM Scan 1 MV400.

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Dcodpfx Ajzzag Roptjl Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Dimensions of the feed opening: 119.5 cm x 65 cm The HSM 1160 V-Press features easy operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, Six-axis industrial robots for floor mounting, suitable for all tasks with a control point or path. The main applications are: spot welding, handling, assembly, application of adhesives, sealants and preservatives, machining, MIG/MAG welding, YAG laser welding. Rated load: 125 kg Additional load at rated load: 90 kg Maximum total load: 215 kg Complete with control system Last maintenance: September 2022. Fully functional. Dcedpfxjydl S Es Aptol

Condition: used, Year of construction: 1996, - Double-sided IMA COMBIMA for longitudinal machining - Swiveling device - Double-sided IMA COMBIMA for transverse machining Dsdpjzuypxefx Aptocl 1 used edge processing line IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Year of manufacture: 1996 Consisting of: - Double-sided IMA COMBIMA for longitudinal machining: Double edging unit 2 x milling units Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Cutting unit Flush trimming 2 x fine milling units Profile trimming blade Surface trimming blade Buffing unit Smoothing unit - Swiveling device from longitudinal to transverse - Double-sided IMA COMBIMA for transverse machining Protective milling Double edging Grooving milling unit Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Capping at the top pressure (retrofit to current model) Flush trimming Fine milling 2 x MFA milling units Grooving milling unit Profile trimming blade Surface trimming blade Copy buffing (4 motors) Buffing (2 motors) Smoothing unit Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, machine/vehicle number: 282897, fuel type: diesel, motor manufacturer: Yanmar 4TNV88-22G, General information Field of application: Construction Weights Empty weight: 520 kg Functional Generator capacity: 22 kVA Dimensions of cargo space: 150 x 70 x 102 cm CE mark: yes Other information Fuel consumption: 3.7 L/Hour at 75% Load Generator: Mecc Alte ECP28-M/C Frequency: 50 Dodpsxpcwusfx Aptecl Voltage: 400 Drill equipment: Tank, Battery, Control Panel Emission level: Stage V / Tier IV final Water tank volume: 60 l Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank