Used Emanuel Hydraulic Press for sale (26,261)

Condition: new, pressure 60 t Bodpfx Afsgg Nn Se Aoln stroke 400 mm daylight longitudinal/sideways 820 x 300 mm dayligth 900 mm liter capacity 6,5 l feed down 6,1 mm/sec feed up 10 mm/sec Motor output 2,2 kW weight of the machine ca. 0,675 t dimensions of the machine ca. 1,2 x 0,85 x 2,1 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Blodpfx Ajlyr Adef Aon

Condition: used, Year of construction: 2022, Force: 3000 kN; Stroke: 250 mm; Dimensions: 705 x 500 x 500 mm; Weight: 11.5 tonnes; Hydraulic press, nominal pressure: 260 bar; Maximum pressing force: 300 tonnes. Bjdozgv Rcepfx Af Asln

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, pressing force: 80 t, stroke length: 400 mm, table width: 750 mm, table length: 600 mm, Omera hydraulic press model OPI-80C Capacity 80 tons Table 700x600 mm Bodpfsy Sz I Hex Af Ajln Stroke 400 mm

Condition: used, Zschokke HAP 063a - 4/6 - Hydraulic press brake - Year of manufacture: 1967 Technical data - Max. bending force: 630 t - Max. oil pressure: 400 bar - Distance between uprights: 4100 mm - Max. bending length: 6000 mm - Overhang: 375 mm - Stroke (adjustable): 0 - 500 mm - Distance between tool clamping surfaces: 300 - 800 mm Hydraulic pumps: - Main pumps: 2 x 22 kW - Delivery rate at idle: 2 x 153 l/min - Delivery rate at full load: 2 x 33 l/min - Control pump: 0.75 kW Installation: - Footprint (W x D): 6960 x 3250 mm Bsdpfxjzf Hnio Af Aeln - Height above ground: 4100 mm - Undercarriage, front: 2200 mm - Undercarriage, rear: 600 mm - Operating voltage: 3 x 400 V / 50 Hz - Machine weight: 51000 kg

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation Blsdpjv Rwu Usfx Af Aon permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: good (used), Hydraulic press 10 tons. Installation height 400 mm Overhang 270 mm Width 1000 mm Without hydraulic pump Transport dimensions: Height without pallet 1440 mm Width 1000 mm Bljdpfx Afjzdufyo Ajn Depth 780 mm Weight 325 kg

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Bedpfxjlc N R Ds Af Aoln

Condition: excellent (used), functionality: fully functional, RÖCHER conversion 1991 (formerly SCHÖN) Pressing force: 1,600 kN Ram stroke: 160 mm Table dimensions: 850 x 650 mm Light curtain control system Next mandatory inspection: February 26 Clamping pin lock in the ram Rapid approach speed: 274 mm/s Working speed: 20/10 mm/s Bedpfx Ajx Sw Iisf Aeln Return speed: 273 mm/s Drive power: 30 kW Operating voltage: 380 Volt/50 Hz Max. fuse rating: 100 A

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Bsdjyxgr Repfx Af Asln

Condition: new, pressure 200 t stroke 400 mm daylight longitudinal/sideways 1300 /450 mm dayligth 900 mm tank capacity 75 l Bljdpfjfm T Hgjx Af Ajn liter capacity 22 l feed down 6,9 mm/sec feed up 12,6 mm/sec Motor output 7,5 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,5 x 1,1 x 2,6 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking 2 year guarantee

Condition: new, Year of construction: 2026, CORMAK V3000 Hydraulic Gluing Press Blsdpfx Afswcy T Ao Aon The CORMAK V3000 is an industrial hydraulic gluing press designed for bonding solid wood components, furniture panels, worktops, and laminated boards. Built around a heavy-duty steel frame and equipped with four hydraulic clamping units providing a combined pressing force of 10 tonnes, the machine ensures consistent production results and high-quality bonded joints. Key Features 4 × 2,500 kg clamping force – evenly distributed pressure ensures strong and durable bonding across the entire workpiece surface. Heavy-duty steel frame – high structural rigidity provides excellent stability and resistance to deformation, even during prolonged operation. Adjustable clamping units – quick and easy positioning allows the press to accommodate a wide range of workpiece sizes. Pressure locking system – maintains constant clamping pressure without the need for continuous adjustments. Spring-assisted side guide for hydraulic cylinders – ensures smooth piston movement and precise operation of the clamping units. Heavy-duty locking nuts – securely hold the selected settings, improving safety when working under high clamping forces. Construction and Technology The V3000 is manufactured from high-grade structural steel, offering excellent resistance to deformation and long-term mechanical fatigue. Each of the four hydraulic clamping units is mounted within a rigid guide system, ensuring accurate distribution of clamping pressure in both the horizontal and vertical directions. The simple adjustment mechanism allows the operator to position the clamping units with a minimum spacing of 240 mm, making the press suitable for both short and irregularly shaped workpieces. The large working capacity accommodates panels up to 1,550 mm in height and 3,000 mm in width. Precision and Performance The CORMAK V3000 provides a uniform distribution of clamping pressure, eliminating gaps and ensuring consistently strong adhesive joints. Stable clamping settings and an integrated pressure locking system improve process repeatability, making the machine particularly suitable for high-volume production. The press is ideal for bonding solid timber, laminated panels, and frame components. Its intuitive operation requires minimal setup, allowing operators to focus on production quality and efficiency. Applications The CORMAK V3000 is ideal for: Manufacturing laminated furniture components and cabinet fronts Producing worktops, edge-glued panels, and laminated timber panels Woodworking shops and industrial facilities processing glued timber Manufacturing stairs, doors, windows, and structural timber frames Standard Equipment Four hydraulic clamping units Heavy-duty steel frame with a 3,000 mm working length Individual pressure locking mechanism for each clamping unit Spring-assisted side guides for the hydraulic cylinders Optional Equipment Additional hydraulic clamping units Quick-connect hydraulic coupling system for an external hydraulic pump Height-adjustable support stands Technical Specifications Specification Value Overall Height 2040 mm Overall Width 3000 mm Maximum Clamping Height 1550 mm Minimum Distance Between Clamping Units 240 mm Distance from Mounting Hole to Clamping Unit 50 mm Clamping Force 4 × 2,500 kg Total Weight 260 kg

Condition: used, Year of construction: 2003, Technical details: Pressure: 60 t stroke: 400 mm table surface area: 700 x 700 mm passage opening in table: Ø 100 mm distance between columns: 700 mm distance between columns: 700 x 1300 mm table height over floor: 850 mm Bedpfxjzvnrds Af Aeln dayligth: max. 1150 mm daylight dimension : table/slide up: 400 - 800 mm cylinder diameter: Ø 110 mm total power requirement: 4,8 kW machine weight approx.: 930 kg dimension machine approx.LxWxH: 1,2 x 0,7 x 3,0 m HYDRAULIC DOUBLE COLUMN PRESS Special construction welded from 25 mm sheet steel Operating mode: single stroke Punch holder: pin M 70 x 2.5mm and punch Ø 128 x 440mm Table protection housing Round punch Ø 130 x 120 mm Hydraulic unit *

Condition: new, Year of construction: 2026, machine/vehicle number: YC27-200T, functionality: fully functional, pressing force: 200 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 140 mm/s, table width: 940 mm, table length: 740 mm, table height: 750 mm, throat depth: 400 mm, overall weight: 14,000 kg, Equipment: CE marking, documentation/manual, Digima YC27-200T Single-Column Press Hydraulic C-frame press with a 200-ton capacity for metal forming. The Digima YC27-200T is a modern, hydraulic single-column C-frame press designed for a wide range of metal forming processes. This machine is suitable for cutting, blanking, bending, light stamping, straightening shafts, and processing components requiring very high clamping forces. The C-frame design provides convenient access to the work area from three sides, facilitating material handling, workpiece positioning, and tool changes. The welded steel frame ensures high rigidity, minimizes deformation under load, and supports process repeatability. Key Advantages Why choose the Digima YC27-200T press? 200-ton capacity — very high working force for blanking, bending, stamping, and straightening components. C-frame design — access to the work area from three sides simplifies operation and tool changes. Welded steel frame — high rigidity, reduced deformation, and stability under load. Integrated valve block — compact hydraulic system design and rapid machine response. Fully enclosed drive — increased work safety and easier machine maintenance. Intuitive operation — lever-pedal system and control panel support comfortable operator use. Bledez Ari Topfx Af Aon Applications Where will the YC27 hydraulic press be useful? The Digima YC27-200T single-column press is designed for use in production facilities, tool rooms, maintenance departments, and industrial workshops where high clamping forces, convenient workpiece positioning, and a repeatable work process are required. Bending and forming — processing metal components using appropriate tooling. Blanking and cutting — working with parts requiring high, controlled clamping force. Light stamping — application in metal component forming processes. Straightening shafts and components — correction of machine components and technical parts. Tool rooms — assembly, fitting, testing, and servicing of production tools. Industrial production — repetitive operations with stable and safe working conditions. Technical Specifications: Model: YC27-200T Machine type: Hydraulic single-column C-frame press Nominal capacity: 2000kN/200ton Motor power: 18.5kW Maximum system pressure: 25MPa Stroke adjustment: 10-180mm Maximum slide stroke: 180mm Maximum mounting height / clearance: 80-380mm Table height from the ground: 750mm Slide dimensions: 770x580mm Table opening: 250mm Mounting hole: Ø70 mm Throat depth / outreach: 400mm Fast descent speed: 21 mm/s Working speed: 8mm/s Return speed: 140mm/s External machine dimensions: 1800x2100x3600mm Machine weight: approx. 14000kg Type: Press Brand: Digima Condition: New Main application: Cutting, blanking, bending, light stamping, straightening shafts and components.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Blodpfjxmr Rxjx Af Aen Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit.

Condition: repair required (used), Year of construction: 2000, Hydraulic press for ceramic tiles SACMI PH380, the machine has incomplete control system. Blodpfsxvdnbex Af Aen

Condition: excellent (used), Year of construction: 1984 Pressing force: 10 t Total pressing area: 300 x 300 mm Stroke: 540 mm Dimensions W x D x H: approx. 900 x 500 x 2150 mm Bsdpfx Asryn S Asf Aeln

Condition: excellent (used), Year of construction: 2001, - 1 Schuler press - Capacity: 1000 tons - Stroke: 1,300 mm Bjdozy Uuyspfx Af Aoln - Die cushion tonnage: 30 - 200 tons - Die cushion stroke: 200 mm - Daylight between press frames (Pmi): 800 mm - Work area: 2,500 x 2,100 mm - Movable tables for press: 2 - Approach speed: 600 mm - Working speed at 50%: 96 mm - Working speed at 100%: 46 mm

Condition: excellent (used), I sell a Lukas baler in very good condition. Bodeum Htzjpfx Af Aeln

Condition: used, Year of construction: 1959, machine/vehicle number: 4501, hydraulic table press Bledpjzp Nxrjfx Af Aon

Condition: new, pressure 80 t stroke 400 mm table surface area 920 x 540 mm Motor output 2,2 kW Bedevu E T Hepfx Af Asln liter capacity 9,0 l dayligth 800 mm tank capacity 31 l daylight between the columns 920 x 300 mm weight of the machine ca. 0,725 t dimensions of the machine ca. 1,45 x 0,85 x 2,45 m Hand and Motor operated. Side-sliding cylinder.

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Bedpfx Aepbvqvof Aoln Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm Bljdpfxjxcblws Af Aen table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm Blodpfozrppvox Af Asn feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Bodpfxjd Swtaj Af Aoln Weight 1250 kg Good condition