Used Enerpac Gpem 5440 W for sale (29,283)

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Nodexw Rcuepfx Ab Ujdb Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Nedpeyhc T Ijfx Ab Uedb Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp (14) units available.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 5,000 h, load capacity: 4,500 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,450 mm, power: 80 kW (108.77 HP), empty load weight: 13,000 kg, total length: 7,000 mm, drive type: Diesel, construction width: 2,300 mm, Telescopic forklift, rigid frame Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: good Front tire type: Air Front tire condition: 20 - 40% Rear tire type: Air Rear tire condition: 20 - 40% Description: LIEBHERR TL445-10 telescopic handler - - 4.5-ton lifting capacity - - 10m lifting height - - Year of manufacture 2007 - - 5000 operating hours according to display - - 2-speed hydrostatic drive - - hydraulic quick coupler - - 4-cylinder John Deere diesel engine, 108 hp - - 4-wheel steering - - 4-wheel drive - - 3 steering modes - - 13,000 kg operating weight - - Overall height 2.45m - - Width 1.30m - - Length 7m - - Tires approximately 40% remaining - - Includes used pallet fork - - Very maneuverable handler - - Telescopic forklift in good condition - - Used bucket, 3 m³, available for an additional charge of 1500 euros!! - - Inspection and test drive are welcome - - Includes CE Declaration of Conformity + operating manual - - Delivery possible. Ndjdpez Dzdyjfx Ab Uob Quick coupler, 3rd valve, 4th valve, heater, full cab, CE certificate

Condition: used, functionality: fully functional, power: 43 kW (58.46 HP), fuel type: diesel, empty load weight: 7,698 kg, Year of construction: 2012, operating hours: 7,921 h, drive type: Diesel, Mini excavator Nodpfsz Dzdgjx Ab Ujdb Condition: Ready for operation and fully functional Technical condition: good Description: Track excavator - crawler excavator - mini excavator WACKER Neuson 75Z3 - - Year of manufacture: 2012 - - 7,921 operating hours - - Operating weight: 8,341 kg - - Transport weight: 7,968 kg - - - with Powertilt + hydraulic quick coupler - - 4-cylinder Yanmar diesel engine, 58 hp - - DIESEL FUELING PUMP - - - with 3 pcs. digging buckets 40 cm - - with 1 pc. ditching bucket 150 cm - - - Cabin, heater, work lights - - AIR CONDITIONING - - good rubber tracks - - very easy to operate Quick coupler, buckets, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, air conditioning

Condition: used, Wig welding machine, DALEX, type GL/W 201 WIG welding machine Machine no.: 201, year of manufacture approx. 1995 Power: 200 amps, 35% duty cycle 160 amps, 60% duty cycle 120 amps, 100% duty cycle Adjustment range: stepless Type of current: DC - direct current Mains connection: 400 volts, 50 Hz, 5.9 kVA, 32 amp plug - 2-cycle and 4-cycle welding system - WIG hose set, 8 meters - HF ignition - Shielding gas pressure regulator - Electrode welding for coated electrodes Njdpfsi E Izvox Ab Uedb - Fan cooling - Connection socket for foot switch (without foot switch) Space required L x W x H: 850 mm x 450 mm x 700 mm Weight: 90 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise, the machine is in very good condition.

Condition: used, mileage: 1,97,515 km, power: 65 kW (88.38 HP), first registration: 04/2002, fuel type: diesel, axle configuration: 2 axles, gearing type: mechanical, number of seats: 3, | VW T4 panel van | 5-cylinder diesel, 88 hp, 2,461 ccm | Manual transmission | 3 seats | Tow hitch | 2 sliding doors (rare and very practical) | 8 tires | Timing belt, power steering pump, and exhaust replaced | Usual rust damage on the bodywork repaired | Garaged, not driven in winter | §57a inspection valid until 04/2026, de-registered | Subject to errors, typing errors, and prior sale. Nodpfx Aez D Hpujb Usdb

Condition: used, total length: 9,300 mm, load capacity: 1,20,000 kg, Trailer - 120to Schwerlastanhänger Drive No Drive Lifting weight (kg) 120,000 Nsdpfxsxfwlxs Ab Uedb

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 315/80R22.5 R, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 160 l, color: white, emission class: euro5, Year of construction: 2023, Equipment: fridge, spoiler, = Additional options and accessories = - Immobiliser - Spare wheel - Spoilers - Sun visor = Remarks = Cabin type: Active Space Country of origin: Spain Displacement: 11,000cc Gcw: 44 Tons Dimension: 6,250 x 2,550 x 3,783 Ground clearance: 217 mm Steering: LH Construction: Tractor Head Gearbox type: TX-12M LIMITATION ON SL INFOTAINMENT ECOSWITCH PORTABLE SMOKING KIT FMS DATA INTERFACE AUTO A/C+LER JOST FIFTH WHEEL 220AH H PERF REVERSE BUZZER L-3-P NET U-COMF ROCKING MODE FULL LED HEADLAMPS 7+7 PIN TRAILER PLUG FRONT PARKING BRAKE WITH BUNK CURTAINS 120A SMART ALTERNAT INDEP. C/E HEATER 6k STD GVW EQUIPMENT STANDARD AIR SUSP. SETTING TRAILER COUPL. - 2 LINE BRAKES Nedpfx Abey Tymqo Usdb STEEL WHEELS GREY IC444 CHASSIS SPEED LIMITER 90 KM/H DRIVE T. 315/80R22,5 SIDE MARKER LIGHT FRONT CORNER FINS JACK T INF HOSE PRES GAUG CAB AIR SUSPENSION UREA TANK 50 LITRES STANDARD AIRTANK PLATING STANDARD GEAR MODE 08329 SENZA ENG ID CUTOFF STD GREY PLAST. PART AS HIGH ROOF CAB FABRIC AIR SUSP. HEATED DRIVER LOWER EXHAUST PIPE STD SETTING C11/C13 FRONT ANTI-ROLL BAR FRONT UNDERRUN PROTECTION REAR ANTI-ROLL BAR 12TX 2420 TD GEARBOX HILL HOLDER REAR OVERHANG 1047,5 LOADS 7500-13000Kgs MECHANICAL BATTERY SWITCH 4-DIN UPPER SHELF FABRIC STA. 2 WAY ADJ. PASS ESP DIGITAL AXLE WEIGHT INDICATION AEBS Compliant FOGLIGHT CORNER+BEND MPH/KPH SPEEDOMETER WARNING TRIANGLE SUB-ARTIC PACK -30 ANTI-SIPHON 2 TANK AIR INTAKE DUSTY ENV FIRE EXTINGUISHER PROVISION HEATED ELECTRIC REAR MIRRORS High Efficiency A-PI RUSSIAN OMOLOGATION PLATE 5th W H=150 MP=50mm ROOF INSUL SUB-ARTIC BATTERY CHARGE LAMIN FUEL TANK 1160L ALUMINUM 1 UND FLOOR STORAGE ENGINE PLATE REAR AXLE RATIO 2.85 REAR AIR SUSPENSION ELECTRIC ROOF HATCH STANDARD CAB TRIM SOFT TOUCH FOAM STEERING WHEEL TRATTAM. PROT. STD VIN CODE CHECK DIGIT CURTAINS ON DOOR WINDOWS FUEL TANK HEATER WITHOUT STICK79239 (IT03-EN) FIRST AID KIT 352CC AIR COMPRESSOR STEEL AIR TANKS APU FREE DISCHARGE HORIZ BATT SIDE FRAM MANUAL CAB TILT STANDARD REVERSE VERTICAL AIR FILTER ENG RPM = 1900 REV/ 5th W EC POSI06139 FRONT PARABOLIC SUSP REAR DAMPERS FILTER HP TRA/HEATED ECO-ROLL ELECTRIC HORN BULB REAR LIGHTS EMISSION EURO V W/O AMBIENCE LIGHTIN STANDARD CATWALK Radice VIN WJM = More information = Tyre size: 315/80R22.5 R Number of cylinders: 6

Condition: used, functionality: fully functional, empty load weight: 1,850 kg, total length: 4,000 mm, Year of construction: 2024, construction height: 710 mm, load capacity: 18,000 kg, tractive force with load: 18,000 N, construction width: 2,000 mm, Heavy-duty trailer Condition: Ready for use and fully functional Technical condition: New Nsdpfxoz Ev Hls Ab Uodb Description: All-wheel steering – axle carrier with adjustable track and tie rods, steering limit at a 45° steering angle, drawbar: 1,200 mm with fail-safe mechanism and height adjustment, as well as

Condition: used, functionality: fully functional, Year of construction: 2014, empty load weight: 512 kg, total length: 4,020 mm, fork length: 1,200 mm, load capacity: 3,485 kg, Accessories Load center: 600 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Ndodpfez Ev Upex Ab Uob Mast type: None Condition: Ready for use and fully functional Technical condition: very good Description: 2x forks: 150 x 50 x 1,200 mm 2x forks: 150 x 50 x 1,200 mm

Condition: used, B&R / 8V1 Acopos 1022 servo amplifier- refurbished - 3 months warranty: This is done exclusively by a manufacturer's inspection. The processing is carried out by Complast GmbH. - taken out of running machine Ndedep Rb Iaopfx Ab Uob - fully functionalmanufacturer: B&R type: 1022 manufacturer no.: 8V1Bitte achten Sie vor dem Kauf darauf, ob der von Ihnen benötigte Acopos ebenfalls einen 12-poligen grünen Stecker hat. If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: überholt

Condition: used, Battenfeld plasticising cylinder Ø 18 mm, IU60 vertical- removed from Battenfeld VM75/60/60 R1040 - removed from running machine - fully functionalinlet: 18.03 mm centre: 18,01 mm outlet: 18,02 mm stroke volume: 22.9 cm³ injection pressure: 2593 bar manufacturer: Battenfeld type: Ø 18 mm, IU60 vertical Njdpfjrr Efrex Ab Uodb spare part no.: 100WW548- removed from Battenfeld VM75/60/60 R1040 - removed from running machine - fully functionalstroke volume: 22,9 cm³ injection pressure: 2593 bar manufacturer: Battenfeld type: Ø 18 mm, IU60 vertical spare part no.: 100WW548 Dition: gebraucht

Condition: used, Year of construction: 2021, operating hours: 14,650 h, clamping force: 1,100 kN, displacement volume: 350 cm³, injection pressure: 1,455 bar, overall weight: 60,000 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Ndjdpfsy R Eq Asx Ab Ujb

Condition: used, mileage: 19,986 km, power: 96 kW (130.52 HP), first registration: 02/2023, overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, loading space length: 2,385 mm, Year of construction: 2023, total length: 5,767 mm, total width: 2,198 mm, total height: 2,357 mm, number of seats: 7, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Errors and omissions excepted! Internal number: 1181. NR58403 ----EQUIPMENT * Conversion to a rear tipper * Conversion for winter service with snowplow and spreader * Airbag (passenger side) * Trailer hitch - fixed, 13-pin socket - incl. trailer stabilization (TSC) * Exterior mirrors, long arm - with integrated turn signals * Heated windshield * Seats: Seat Package 29 - driver's seat, 4-way electrically adjustable (fore/aft, backrest, seat cushion tilt, height) - double passenger seat with storage compartment under individually folding seat cushions - headrests, height-adjustable - tray integrated in the double passenger seat (foldable) - seat heating front - interior armrest for driver - lumbar support, manual (driver's seat) - airbag passenger side, head/shoulder airbags front and side airbags front - seat upholstery: fabric * Central locking - second key, foldable with remote control incl. central locking * Transmission: 6-speed gearbox * Anti-lock braking system with electronic brake-force distribution (EBD) * Axle load increase - front to 1850 kg * Airbag driver side * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * Exterior mirrors, short arm - with integrated turn signals * Battery: Battery runtime, programming of battery runtime to 10 minutes * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, flat * Roof, overhead storage compartment front * Headliner in driver's cab * Roof marker lights * Double cab - storage compartment under the seats of the 2nd row - 2 rear doors with fixed windows - headliner complete * Tachometer * Electronic stability and safety program (ESP) with traction control (TSC) - hill start assist - side wind assist - safety brake assist - rollover protection - emergency brake assist incl. emergency brake light - additionally with trailer stabilization only in conjunction with trailer hitch * Windows, 2nd row: Side windows fixed, right and left Nodpoz Empwsfx Ab Ujdb * Power windows front, electrically operated - with quick-down/up function for driver's side * Ford Easy Fuel - comfort fuel filler cap and misfueling protection * Generator * Headlights - low beam: Halogen headlights with daytime running lights * Glove compartment with lockable lid * Interior lighting with delay circuit with reading lights front * Air conditioning front incl. dust and pollen filter * Fuel tank 70 liters * Radiator grille: 3 struts and trim in black-grey plastic * Paint: Solid color * Steering wheel: Artificial leather steering wheel * MyKey key system - individually programmable second key * Fog lights * Emergency assistance call * Technology Package 8 (4x4) - windshield, heated - windshield wipers with rain sensor - active emergency brake assist (camera-based) - headlight assistant with day/night sensor - cruise control - Ford audio system (DAB+, MyFord Dock, FordPass Connect, speakers, antenna, controls on the steering wheel, Bluetooth, USB, hands-free system) * Particulate filter: Diesel particulate filter * Flatbed: Standard flatbed (wide) - front wall extension, retaining straps for tailgate * Power steering * Seat belts - seat belt tensioners and force limiters front * Seats: Rear seat package 1 - 2nd row with 4-seater bench seat incl. 4 headrests, - 3-point seat belts, - two ISOFIX mounts on the two outer seats and storage compartment * Recirculation mode * Immobilizer * Heat protection glazing, lightly tinted

Condition: used, mileage: 32 km, power: 90 kW (122.37 HP), first registration: 08/2026, fuel type: diesel, overall weight: 2,400 kg, color: blue, gearing type: mechanical, number of seats: 2, total length: 4,853 mm, total width: 1,855 mm, total height: 1,842 mm, loading space length: 2,001 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4267.NW26.X027083 Errors and prior sale excepted! ----SPECIAL EQUIPMENT * Trailer hitch, fixed - incl. ESP trailer stabilization and continuous power supply * Wheels: All-season tires. The tires are marked with the "3 Peak Mountain Snow Flake (PMSF)" snowflake symbol. * Sliding door, right and left * Seat Package 56: Driver and passenger seats individually and variably heated - steering wheel, heated - driver and passenger seats 4-way manually adjustable - lumbar support for driver, 2-way adjustable - passenger seat, foldable with integrated work surface - airbag package, consisting of head and shoulder airbags, as well as side airbags for driver and passenger * Auxiliary heater, fuel-powered, programmable via on-board computer FURTHER EQUIPMENT * Airbag, driver and passenger side * Airbag: Passenger airbag deactivation function * Alcohol interlock (preparation) * All-wheel drive * ABS - with ESP, hill start assist and traction control * Exterior mirrors, electrically foldable, adjustable and heated * Floor covering, rubber, front * On-board computer * Roof storage compartment, front * Roof rails, preparation kit * Anti-theft/alarm system with interior monitoring * Diesel particulate filter with SCR catalytic converter and AdBlue tank * Double-wing tailgate with 180° opening angle (without window) * Remote control: 2nd remote control key for central locking * Windshield, heated * Glove compartment with lid, illuminated * Interior lighting, front with delay function and two reading lamps * Interior lighting, cargo area - 2 LED lamps * Air conditioning with automatic temperature control (2-zone) for driver and passenger side, separately adjustable * Cargo area floor: Vinyl floor covering * Charging station, inductive * Steering wheel: Multifunction leather steering wheel * Steering column, adjustable in height and reach * Headlight range adjustment * Fog lights with static cornering lights * Package: Driver Assistance Package 3 KeyFree system with Ford Power Start function - Intelligent Adaptive Cruise Control IACC - Blind Spot Assist with Cross Traffic Alert - Emergency braking function - Exit warning - Pre-Collision Assist, pedestrian and cyclist detection - Traffic sign recognition - Driver drowsiness warning - Lane Keeping Assist - Parking pilot system front, rear - Rear view camera - Hill start assist - 10-inch touchscreen, DAB/DAB+ and navigation - 10.25-inch digital instrument panel - FordPass Connect, eCall emergency call assistant - Android Auto, Apple CarPlay 2 USB-C, voice control * Upholstery: Fabric * Tire pressure monitoring system * Wheels: Alloy wheels 7 J x 17 with 215/55 R17 tires * Wheels: Tire repair kit * Windshield wipers with rain sensor * Headlight low beam: Halogen headlights with daytime running lights * Headlight assistant with day/night sensor * Side wall cladding, half-height * Power steering, electro-mechanical EPAS * Seatbelts, front * Sun visor, driver and passenger - with mirror and ticket holder, not illuminated * Start-Stop system * Dust and pollen filter - without activated carbon filter * Socket: 12-volt socket - 1x front and 1x in the cargo area * Daytime running lights * Partition wall, full, without window (plastic) * Door interior panel, front - with illuminated switches including door storage for 1.5 L bottles * Immobilizer, electronic * Central locking with remote control * Auxiliary heater, electric ... and more. ----1st hand. German version. Errors and prior sale excepted Nodpez Emqnsfx Ab Uedb

Condition: new, functionality: fully functional, power: 22 kW (29.91 HP), fuel type: electric, Year of construction: 2026, • The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression. • Work with wet and sticky materials without clogging and jamming. • Adjustable feed rate. • It occupies less space and has smaller height. • It works without dust, vibration and noise. • Low power consumption and maintenance frequency. • Width: 1400 mm • Length: 2500 mm • Motor power: 22 kW • Bar number: 5-9 • Elliptical bar shape • Aperture: 25-150 mm • Feeding size 50-1.500 mm • Chainy drive system Nsdpfx Abez Er E Rs Uedb • Max. Capacity 200-300 T / s • Capacities calculated according to the specified material density (1.6 tn/m3)

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Width mit Auflage 2300 mm Götzinger Power Drill Type BF 315 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm Dimensions: L x W x H = 4.80 x 1.60 x 2.40 m – Machine weight: 1,500 kg Ndsdpfx Aed Ih Hqjb Ujb ----- Total price for the configuration listed above, ex works: upon request ----- ----- Options available at additional cost, upon request: - Stop for longitudinal drilling, height-controlled slot stop via NC axis - Online connection to window software; data cable must be provided on site (Klaes, Prologic 3E, Adulo) - CNC module for venetian blinds and circular milling -Remote maintenance module -Milling spindle with HSK mount -HSK 32 tool holder ----- Plus shipping and installation/training (Technical specifications according to the manufacturer—subject to change without notice!) Translated with (free version)

Condition: new, Number of spindles 4 St. Ndedpfsyhq Ugjx Ab Usb Working width 15 - 230 mm Working height 10 - 125 mm Feed speed 6 - 24 m/min.

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Ndjdpfx Aboyy A Iqe Ueb Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: new, Number of spindles 6 St. Working width 15 - 250 mm Working height 10-200 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 6-24 m/min. Kuper SWT XL-6 Automatic Planer and Moulder (Window Version with Glazing Bead Separation) ----- - ??Number of spindles: 6 (Bottom, Right, Left, Top, Top, Bottom) - Working width: 15 - 250 mm - Working height: 10 - 200 mm - Spindle speed: Frequency-controlled 4,000 - 8,000 rpm - Feed speed: 6 - 24 m/min, infinitely variable - Feed motor with electronic brake: 4 kW - Equipped for glazing bead separation in window production - Motorized axial and radial spindle adjustment - K2 Comfort Control, Professional - 9" Touchscreen Manufacturer's Description (Summary): ----- 1st Spindle: HORIZONTAL BOTTOM ----- Siemens IE3 motor with inverter brake: 7.5 kW Diameter: 40 mm Spindle length: 275 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool cutting circle: 125 - 160 mm Rebating unit: 20–25 mm diameter difference relative to planing head Important: Machine cannot be operated without the jointing/rebating cutter Extraction nozzle: D = 125 mm "Pro-Lock" tool clamping system 2nd Spindle: VERTICAL RIGHT ----- Siemens IE3 motor with inverter brake: 7.5 kW Diameter: 40 mm Spindle length: 176 mm Clamping length (effective length): 170 mm Speed, frequency-controlled: 6,000 - 8,000 rpm Tool cutting circle: 112 - 200 mm Axial adjustment range: 60 mm Table plate adjustable to tool radius Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 3rd Spindle: VERTICAL LEFT: ----- Siemens IE3 motor with inverter brake, 7.5 kW Diameter 40 mm Spindle length 176 mm Clamping length (effective length) 170 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 60 mm Standard profile depth 20 mm Table plate adjustable to tool radius Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector (chips discharged downwards) "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 4th Spindle: HORIZONTAL TOP: Njdezrh E Njpfx Ab Usdb ----- Siemens IE3 motor with inverter brake, 7.5 kW Diameter 40 mm Spindle length 260 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 20 mm Pneumatic pressure shoe, dynamically adjustable via linear guides Pressure lips in front of the spindle: pneumatically sprung, externally adjustable, with path control Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 5th Spindle: HORIZONTAL TOP: ----- Siemens IE3 motor with inverter brake 7.5 kW Diameter 40 mm Spindle length 260 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 20 mm Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction: individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized ...

Condition: reconditioned (used), Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Ndjdpfswzmu Rjx Ab Ujb Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...

Year of construction: 2026, condition: new, functionality: fully functional, Barbaric pillar jib crane with vacuum lifter - Boom length: 6 m - Overall height: 4.3 m - Load capacity: 250 kg - Comfort control, all functions on the operating handle, lifting/lowering, tilting, suction/releasing - Tiltable by 90° - Lifting speed 0-10 m/min continuously adjustable - Chain length: 3.5 m - 230V, 3x1.5 mm² Ndedpfxevy Trne Ab Uob - Operating pressure 6 bar, filtered, dry compressed air required - Safety system - Reinforced traverse: Reinforced version for slightly permeable and slightly structured panels Further details on request. Exhibition machine, can be viewed by appointment.

Condition: used, maximum load weight: 334 kg, overall weight: 1,000 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,530 mm, loading space width: 1,300 mm, loading space height: 80 mm, total width: 1,995 mm, total height: 400 mm, A35 GW26GA00006 Lowerable Trailer Manufacturer: STEMA, Model WOM STS XT .1 Gross weight: 1,000 kg, Njdpfjyn Ugajx Ab Uedb Low-bed trailer, hydraulically lowerable, with overrun brake * Pivot axle with new kinematics * Support wheel * Hydraulic hand pump * Extremely stable welded frame with integrated railing * Additional central lashing rail * Waterproof phenolic plywood floor * Modern Multipoint III lighting with reversing and fog lamps * Optimal road holding thanks to stable, hot-dip galvanized chassis with STEMA safety V-drawbar * 2 wheel chocks * 2 mud flaps * Patented foldable license plate holder * Vehicle not refurbished...and much more. Errors and prior sale reserved.

Condition: used, maximum load weight: 2,123 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 08/2022, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 350 mm, total width: 1,647 mm, total height: 748 mm, Year of construction: 2022, A37 GW26N0159988, Rear tipper by Unsinn, type UHK 2627-14-1500, tandem axle, gross vehicle weight 2,600 kg, platform trailer, overrun brake, 100 km/h, aluminium side panels, pumpless cordless screwdriver pump. Subject to errors and prior sale. Nodpjyn Uc Usfx Ab Uedb

Condition: used, Year of construction: 2026, Special price – demonstration machine, Garbsen. Our WL 6 machine concept. The Weima high-performance shredder, with its flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without requiring manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive, and four-way rotatable knives/cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction in the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption, and an optimal discharge of the shredded material. The screen located under the rotor determines the chip size (10 - 100 mm). An optionally available, hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor shaft on one side. Precise cutting at high throughput with a profiled V-rotor. The V-rotor, developed specifically by WEIMA, is universally applicable and made of solid material. Its aggressive material feed, with up to two knife rows, guarantees a high throughput with low power consumption. It can be equipped with hardened cutting knives made of steel with edge lengths of 30 mm and 40 mm. These can be repeatedly rotated when worn, which drastically reduces maintenance costs. Intuitive operation thanks to a Siemens PLC control with a touch display. To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. In doing so, we use only high-quality components – for example, from Siemens or Rittal. Intuitively operable touch screens guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Technical specifications WL 6: Feed opening 800 x 1,250 mm. Hopper capacity 0.9 m³. Rotor length 800 mm. Rotor diameter 256 mm. Drive power 22 kW. Rotor speed 90 rpm. Max. number of knives 42 pieces. Type and size of knives: concave / 40 x 40 mm, cutting crowns. Screen size 10-60 mm. Paint: WEIMA standard RAL 2022 / 7016. Connection value 400 V +/- 5% / 50 Hz. Weight approx. 1,600 kg. Including: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S Ndodoy D E Tdepfx Ab Usb